Sanyo DP50E84 Owner's Manual

VIDEO INPUT

AUDIO OUTPUT

AUDIO INPUT

AUDIO
(DVI)

(VIDEO)

5

6

The American Academy of Pediatrics dis­courages media use by children younger
than two years. For more information,
visit www.aap.org.

Please read before operating your HDTV!

PROTECTING THE LCD
SCREEN

CAUTION: The screen can be damaged if

it is not maintained properly.

•

Do not use hard objects such as hard
cloth or paper to clean the screen.

•

Do not use excessive pressure when
cleaning the screen; excessive pressure
can cause permanent discoloration or
dark spots.

•

NEVER spray liquids on the screen.

HANDLING PRECAUTIONS

•

Handle by the cabinet only.

•

Handling by two or more people is rec­ommended.

•

Never touch the screen when handling.

•

Handling damage is not covered under
warranty.

•

Do not remove the protective film
covering the front cabinet while
handling the HDTV.

POSITIONING THE HDTV

•

Always use a firm and flat surface when
positioning your HDTV.

•

Do not position the unit in a confined
area.

•

Allow adequate space for proper venti­lation.

•

Do not position the HDTV where it is
easily reachable by small children and
may present risk of injury.

•

Once HDTV is positioned, remove the
protective film covering front cabinet.

SPECIFICATIONS

NOTE: Design and specifications are
subject to change without notice.

Power Requirement:

Source: AC 120V, 60Hz

AC Power Consumption: 95 watts

Weight: 35.7 lbs.

Dimensions _________________________

WIDTH HEIGHT DEPTH

w/stands 44.6 27.7 9.3

w/out stands 44.6 26.4 2.6

NOTE: Dimensions are in inches

GETTING STARTED

Hook up your antenna or your cable
service to the HDTV’s ANT terminal
with the use of a 75 OHM coaxial cable.

NOTE: Keep your indoor antenna at

least 3 ft. away from the televi­sion set and any other electron­ic equipment.

The tuner in this HDTV can receive:

•

Digital and Analog off air signals
from an antenna

• Analog or ClearQAM cable channels

from a direct Cable TV connection.

ANTENNA CONNECTION FOR
OFF-AIR SIGNALS OR CABLE

ANTENNA

CABLE

ANALOG / DIGITAL

ANTENNA IN

Need help? www.sanyoctv.com 1-800-877-5032 Need help? www.sanyoctv.com 1-800-877-5032

1JC0P1P0081- -

Part No.:

Owner’s

Manual

(English)

© 2014 Sanyo Manufacturing Corporation

1080p HDTV LCD

50”LED

Model:

DP50E84

class

(49.5” diagonal)

HDTV INPUT/OUTPUT REFERENCE ________________________________________

HDTV SIDE PANEL

OPTICAL AUDIO OUTPUT

Hookup a multichannel receiver or home theater system with
the use of an optical (SPDIF) audio cable.

ANT Analog / Digital Antenna Input

Hook up your indoor or outdoor digital antenna, or a direct
Cable service (Analog or ClearQAM).

HDMI (INPUT1, INPUT2 or INPUT3)

Use HDMI INPUTS to hookup HD digital devices such as a Blu-
ray player, HD Cable Box, HD Satellite Receiver or Video­game System.
Connect your digital device’s HDMI output to any of the three
(3) HDMI inputs on your HDTV’s side panel with the use of an
HDMI cable.

– DVI: A DVI connection is possible via the HDMI1 (DVI) input

using an appropriate cable or adapter and connecting the
audio to the L and R (AUDIO INPUT) jacks.

– ARC: Connecting a Home Theatre system to the HDMI1

(ARC) input allows you to choose to output the TV’s Audio
signal (see ARC Setting in Sound menu.)

– MHL: The Mobile High-Definition Link available thru HDMI2

enables the TV to communicate with a MHL-compatible
device connected with appropriate HDMI cable or connector.

USB

USB input jack is used to connect a USB mass storage device

to watch digital images stored in JPEG format.

VIDEO INPUT (COMPONENT/COMPOSITE combo)

COMPOSITE

connection is used to hookup your analog
equipment such as a VCR or an older DVD player.
Match the YELLOW connector from your external device to
the GREEN Y-VIDEO jack on the HDTV.

NOTE: Use the WHITE / RED (L and R) jacks for AUDIO signal.

COMPONENT connection will accept SDTV, EDTV and HDTV

video signals. Use it for great image quality from digital
devices such as a DVD player or Video Game system.
Match your digital device’s Component output jacks to the
Component input jack set on your HDTV.

NOTE: Use GREEN (Y), BLUE (Pb), RED (Pr) jacks for VIDEO
signal and the WHITE and RED (L and R) jacks for AUDIO signal.

Analog Stereo (L/R) Audio Output

Hookup an external stereo Amplifier. (Do not connect
external speakers directly to the HDTV)

1

2

3

4

5

6

Printed in Mexico, December 2013

US4A / 50-Z8AL / GXJA

Sanyo Manufacturing Corp.

2001 Sanyo Avenue, San Diego, CA 92154

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.

9. Do not defeat the safety purpose of the polarized or grounding­type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit fully into your out­let, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched par­ticularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

11. Only use attachments/accessories specified by the
manufacturer.

12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused
for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate nor­mally, or has been dropped.

15. If an outside antenna is connected to the television equipment,
be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges.
In the U.S. Selection 810-21 of the National Electrical Code pro­vides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location
of antenna discharge unit, connection to grounding electrodes,
and requirements for the grounding electrodes.

16. An outside antenna system should not be located in the vicini­ty of overhead power lines or other electrical light or power
circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or cir­cuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING ACCORDING
TO NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

“Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the build­ing, as close to the point of cable entry as practical.”

17. Wall or Ceiling Mounting—The product should be mounted to
a wall or ceiling only as recommended by the manufacturer.

18. Apparatus shall not be exposed to dripping or splashing, and no
objects filled with liquids, such as vases, shall be placed on it.

19. When the MAINS plug is used as the disconnect device, the
disconnect device shall remain readily operable.

RISK OF ELECTRIC SHOCK DO NOT OPEN!

CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK
OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTE­NANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

FCC INFORMATION ________________________________________________

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen­erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm­ful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

CAUTION: FCC Regulations state that improper modifications or unauthorized changes to this unit may void the user’s authority to

operate the unit.

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require
a safety connection to electrical earth.

Install two (2) “AAA” batteries (not
included) in the remote control.

PRECAUTIONS:

• Replace both batteries at the same
time. Do not use a new battery with a
used battery.

• There’s a risk of explosion if a battery
is replaced by an incorrect type.

• Keep away from moisture.

• Be sure to match the “+” and “–”
signs on the batteries with marks
inside the remote control.

• Please properly dispose of used up
batteries.

WARNING: The batteries (or battery
pack) shall not be exposed to excessive
heat such as sunshine, fire or the like.

BATTERY INSTALLATION

ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection
Agency (EPA). ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and
the U.S. Department of Energy helping us all save money and protect the environment through
energy efficient products and practices.

Changes to default as-shipped television configuration and settings or enabling certain optional
features and functionalities will change the energy consumption of the television, this may
increase energy consumption beyond the limits required for ENERGY STAR qualification.

HDTV BACK PANEL

HDMI

HDMI

(ARC/DVI)

ANTENNA /
CABLE IN

2

HDMI

3

1

OPTICAL

OUTPUT

4

2

1

3

NOTE: Skip assembly if using a wall

mounting kit (not included).

1

Place HDTV face down on a
padded or cushioned flat surface
to protect the screen and finish.

2

Carefully insert both foot stands to
the bottom of the HDTV and secure
them by inserting two (2) screws
(M6 6x30) in each one as indicated
in the diagram below.

NOTE: The longer part of the foot

stands should face TV front.

3

Position the HDTV on a firm and
flat surface with adequate space
for proper ventilation.

STAND ASSEMBLY ______

WALL MOUNTING (OPTIONAL)

Wall mounting of the HDTV must be
performed by a skilled person.

If foot stand disassembly is required:

•

Place HDTV face down

on a padded or
cushioned flat surface to protect the
screen and finish.

•

Remove the two (2) screws securing
each foot stand. CAUTION: Hold the
stands firmly as you remove the last
screw.

Use the four (4) screws included in the
literature package (or removed from
the foot stands) to secure the HDTV to
a wall mounting kit (not included.)

IMPORTANT: Wall mount kit must
comply with VESA standard 400 x

400. All four (4) screws must be
threaded to the wall mount and
HDTV’s back cabinet

Mounting screws measurements:

M6 (6mm) Diameter, Length 12mm
(min.) – 30mm (max.)

AV INPUT SELECTION

Press the INPUT key to select the
correct AV input for the video source
you wish to watch.

NOTE: Unused AV inputs may be dis­abled with the Input Setting feature.

Before proceeding, please make
sure to correctly hook up your
antenna or cable connection and
all AV equipment to your HDTV.

1. PLUG IN AC POWER CORD

120V AC, 60Hz

2. TURN ON TV

3. SELECT LANGUAGE

4. TV SET LOCATION SELECTION:

Select “Home Mode” to set the
HDTV’s backlight to an Energy Star
qualified level, or select “Store
Mode” to set the backlight to a retail
display level.

5. CHOOSE INITIAL SETUP METHOD:

Select “Quick Setup” to perform an
automatic signal search from the
antenna input and the devices con­nected to the AV terminals.
Select “Step by Step” to get on­screen assistance for appropriate
antenna signal and external device
hook up to the AV terminals.

6. SIGNAL SEARCH RESULT SCREEN

The final setup screen displays ana­log and digital channels found, as
well as AV inputs detected.
Select Finish and press ENTER.

NOTE: If you wish to repeat the

process, select Repeat.

INITIAL CHANNEL SEARCH

TRADEMARKS ________

As an Energy Star®Partner, Sanyo
Manufacturing Corporation has
determined that this product
meets the Energy Star

®

guidelines

for energy efficiency.

ENERGY STAR

HDMI, the HDMI Logo and High-Definition
Multimedia Interface are trademarks or regis­tered trademarks of HDMI Licensing LLC in
the United States and other countries.

MHL, Mobile High-Definition LInk and the MHL
logo are trademarks or registered trademarks
of MHL Licensing, LLC.

Manufactured under license from Dolby
Laboratories. Dolby is a trademark of Dolby
Laboratories.

Roku Ready and the Roku Ready
logo are the registered trade­marks of Roku, Inc.

REMOTE CONTROL OPERATION _______________________________

Auto – Searches the detected mode,

Cable or Air.

Cable – Searches for analog and
unscrambled (ClearQAM) digital cable
channels.

Air (Antenna) – Searches for analog
and digital off-air channels.

Channel Search

Display the On Screen menu and use
the CURSOR keys to select

Channel. Press ENTER.

ON-SCREEN MENU
OPERATION

Channel Scan Memory lists all Analog
and Digital channels found. It also lists
Analog channels that were not found,
which can be added.

Use the CURSOR  keys to move the
channel select bar through all enabled
and disabled channels.

NOTE: You can use the

CH

 keys to

change page.

Press ENTER to enable or disable the
selected channel.

NOTE: For information on local digital
channels, visit www.antennaweb.org

Channel Scan Memory

Channel

Auto

Cable

Air (Antenna)

Move

Select

ENTER

Exit

EXIT

Return

MENU

TV

Channel Search

Channel Scan Memory

Input Setting

Video Setting

Channel Scan Memory

Move

Select

ENTER

Page

CH

Exit

EXIT

Return

MENU

TV

Analog

Digital

Digital

Analog

Analog

Analog

Digital

03

03-1

03-2

04

05

06

06-1

WREG-DT

WCVB

WEXT

NICK

NICK

VBCT

IMPORTANT FACT: This HDTV maintains only
one database of digital channels. Therefore,
when you search for cable channels, the
database of antenna digital channels will be
deleted. You will only be able to receive those
ClearQAM channels your cable company
provides.

Input Setting feature allows the
removal of unused inputs from the AV
input loop.

Use the CURSOR  keys to select an
AV input. Press ENTER to disable
(uncheck) or enable (check) the high­lighted input.

NOTE: HDMI2 and USB inputs cannot
be disabled.
Unchecked box means the input will
be skipped

Input Setting

Channel

Move

Select

ENTER

Exit

EXIT

Return

MENU

TV

Channel Search

Channel Scan Memory

Input Setting

Video Setting

Video

HDMI1

HDMI2

HDMI3

USB

:Skip

Use this feature to establish either a
Component or Composite connection
to the VIDEO INPUT jacks on your TV.

Video Setting

SETUP

Display the On Screen menu and use
the CURSOR keys to select Setup.
Press ENTER.

Menu Language

Choose between English, Spanish and
French for your On Screen menu’s dis­play language.

Press ENTER on the desired language.

Use this feature to automatically block
programs with content you deem as
inappropriate for viewing by your
children.

NOTE: This feature is designed to com-

ply with the United States of
America’s FCC V-Chip regula­tions. Therefore, it may not func­tion with broadcasts that origi­nate in other countries.

ADJUSTING THE V-CHIP RATINGS

Select ON and press ENTER. Select
Adjust (Standard) and press ENTER.

V-Chip (parental control)

For V-Chip (TV) ratings select TV and
press ENTER. Use the CURSOR  
keys to select a rating and press ENTER.
Use the CURSOR   keys to set the
rating’s status as Blocked or Viewable.
Once ratings are set, press the EXIT key
to close the V-Chip menu.

Display the On Screen menu and use
the CURSOR keys to select
Picture. Press ENTER.

You may choose between Vivid, Mild,
and Standard, which have predeter­mined fixed picture parameter
values, or choose the Manual option
for customized personal settings.

NOTE: Selected Picture setting is

shared among AV inputs
(except USB.) Current option
is indicated by a blue marker.

MANUAL PICTURE SETTINGS

Manual parameters to adjust include:

•

Color

•

Tint

•

Contrast • Brightness

•

Sharpness • Color Temperature

The Detailed Setting option allows for
the adjustment of several additional
parameters such as:

•

Signal Balancer• Noise Reduction

•

White Balance• Edge Enhancer

•

H-Size / V-Size • Dynamic Contrast

•

Enhanced Motion

Picture

Vivid

Mild

Standard

Manual

Color

Tint

Contrast

Brightness

Sharpness

Color Temperature

Detailed Setting

Default

Move

Select

ENTER

Exit

EXIT

Return

MENU

TV

ADJUSTING A PICTURE SETTING

Use the CURSOR  keys to highlight
the picture parameter you wish to
adjust. Press the ENTER key to enter the
value adjustment screen. Modify the
selected parameter’s value by pressing
the CURSOR keys.

NOTE: CURSOR  keys select the

next/previous parameter with­out returning to the previous
menu screen.

Once adjustments are complete, press
the EXIT key to return to normal TV
viewing.

Manual

Move

Select

ENTER

Exit

EXIT

Return

MENU

TV

Bass

Treble

Bass Boost

Detailed Setting

Default

On

ADJUSTING A SOUND SETTING

Use the CURSOR  keys to highlight
the sound parameter you wish to adjust.
Press the ENTER key to enter the value
adjustment screen. Modify the selected
parameter’s value by pressing the
CURSOR keys.

NOTE: CURSOR  keys select the

next/previous parameter with­out returning to the previous
menu screen.

Once adjustments are complete, press
the EXIT key to return to normal TV
viewing.

View pictures on your HDTV with the
use of a USB mass storage device (not
included.)

H

HDMI

3

USB FLASH

DRIVE

PHOTO VIEWER

USB INPUT

HDTV SIDE PANEL

Your Sanyo HDTV is registered at the time of purchase,

please keep sales receipt for future reference.

For your protection in the event of theft or loss of this product, please fill in the
information requested below and KEEP IN A SAFE PLACE FOR YOUR OWN
PERSONAL RECORDS.

Model No. ______________________ Serial No. _____________________________

Purchase date ___________________ Purchase Price _________________________

Where Purchased _________________________

(Located on back of unit)

ONE-YEAR LIMITED PARTS AND LABOR

WARRANTY

THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS
PURCHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO
RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED
WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT
APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.

WARRANTY APPLICATION

FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing
Corporation (SMC) warrants this TV to be free from manufacturing defects in materials and
workmanship under normal use and conditions for parts and labor.

For the FIRST 90 DAYS from the date of original retail purchase, Sanyo Manufacturing
Corporation will replace any defective TV via exchange at the retailer. To ensure proper

warranty application, keep the original-dated-sales receipt for evidence of purchase.
Return the defective TV to the retailer along with the receipt and the included
accessories, such as the remote control. The defective TV will be exchanged for the same
model, or a replacement model of equal value, if necessary. Replacement model will be
contingent on availability and at the sole discretion of Sanyo Manufacturing Corporation.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

OBLIGATIONS

For one year

from the date of purchase, Sanyo Manufacturing Corporation warrants
this product to be free from defects in material and workmanship under normal use and
conditions. During the first 90 days under this warranty for any manufacturing defect or
malfunction Sanyo Manufacturing Corporation will provide a new TV via exchange at
the retailer.

HOW TO MAKE A CLAIM UNDER THIS WARRANTY

Please call 1-800-877-5032. Please be prepared to give us the television’s model number
and serial number when you call. The model number and serial number are printed on a

label attached to the back of the unit.

For customer assistance, call toll free 1-800-877-5032.

This warranty expresses specific contractual rights; retail purchasers may have addition­al statutory rights which vary from state to state.

(EFFECTIVE: March 1, 2007)

(Located on back of unit)

CHANNEL

PICTURE

SOUND

NOTE: A thumbnail hide icon will
appear if a picture cannot be decoded
or if no thumbnail data is available.

Thumbnail veiw

EXIT

USING THE PHOTO VIEWER

Press ENTER on a thumbnail photo to
enable the Full View and Start
Slideshow functions.

Once in Full View mode:
Use the CURSOR keys to change

picture.

Press ENTER to show the full view
options menu.

•

Rotate

•

Zoom In / Out

•

Pan

•

Slideshow setup

•

Start Slideshow• Browse Photo

SLIDE SHOW

In the Slideshow Setup menu you may
turn the Shuffle and Quick Change
options ON or OFF.

Press ENTER on Start Slideshow
either from the Thumbnail View
Screen or from the full view options
menu to start the slideshow from the
current picture.

Insert the flash drive into the USB port,
the TV will display the Photo Viewer
thumbnail screen.

NOTE: INPUT key can also be used to
select the USB input on your HDTV.

NOTE: Blocking a rating will automati-

cally block all higher ratings.
Unblocking a rating will auto­matically unblock all lower
ratings.

For V-Chip (Movie) ratings select Movie
and press ENTER, and then select the
desired MPAA rating limit. Press the

EXIT key to close the V-Chip menu.

ADVANCED V-CHIP SYSTEM (RRT5)

RRT5 (V-Chip Regional Ratings 5) is an
advanced V-Chip ratings system for over
the air digital channels. When compati­ble RRT5 data is detected, it’s down­loaded & stored in memory, and the
Setup V-Chip screen is then modified to
show the Adjust (Advanced) option.

Use the CURSOR   and keys to
highlight the different options, and use
the ENTER key to block or unblock the
selected rating.

NOTE: When vertical scroll bars appear,

press

CURSOR

 to gain

access to the additional ratings.

MORE INFORMATION

Additional information about MPAA
(Motion Picture Association of
America) and V-Chip rating can be
found at: www.mpaa.org and
www.v-chip.org, respectively.

VIDEO INPUTAUDIO INPUT

AUDIO
(DVI)

(VIDEO)

Composite connection

Component connection

Once in the Video Setting menu, use
the CURSOR  keys to select
Component (Y/Pb/Pr) if your hookup
uses five (5) jacks like on the left; or
select Composite (V) if your hookup
uses three (3) jacks like on the right.

NOTE: Selecting Auto Detection will
establish the correct Video Setting
depending on the type of connection
used in VIDEO INPUT.

Energy Solution

ECO (ENERGY SAVER)

ECO controls the LCD backlight bright­ness to reduce power consumption.

– Level 1: Energy Saver feature is off.
– Level 2: Low power consumption.
– Level 3: Lowest power consumption.

Press ENTER on the desired level.

LIGHT SENSOR

This feature detects ambient room
light brightness and uses that reading
to control the panel brightness level
and picture parameters to reduce the
HDTV’s power consumption.

NOTE: When room lighting is dark,

the panel brightness and/or the
picture setting parameters
such as brightness and con­trast are lowered. When room
lighting is bright, parameters
are affected opposite.

Use the CURSOR  keys to select On
or OFF and press ENTER.

AUTO SHUT-OFF

When Auto Shut-off feature is set to
ON, it will allow the HDTV to automa­tically turn off when no video and/or
audio signals are being received.

NOTES: By factory default, this fea-

ture is set to ON. The HDTV
will automatically turn off if
no AV signals are received in
a time span of 15 minutes.

Use the CURSOR  keys to select On
or OFF and press ENTER.

This feature allows you to set a
Current Time for your HDTV and
enable a Switch On Time for the HDTV
to turn on at a specific time of day.

When On Timer Function is set to ON,
the TV will automatically turn on at the
previously set Switch on Time.

Use the CURSOR  and keys to
modify the Current Time and/or Switch
On Time.

Clock Timer

POWER. Turns your HDTV On or Off.

MUTE. Mute or restore the sound.

INPUT. Selects the video source to

view. Holding down the key displays
the Input List.

NUMERIC KEYS. Choose a channel
directly.

SUB CH. Use for the direct selection of
digital subchannels. For example: for
channel 39-1 press the

3 and 9 keys,

followed by the dash ––, and 1 keys.

RECALL. Switch between current chan-
nel and last selected channel or input.

MENU. Display or hide the on-screen
menu.

SMART. Access HDMI2/MHL input
directly when a Roku streaming stick is
connected.

CURSOR. Move the on-screen
cursor in the desired direction.

ENTER. Set or select the highlighted
option on the screen.

VOL +

––

. Increases or decreases the

audio level.

CH . Scan through the channels in
the memory database.

BACK (arrow). Returns to previous
screen when accesing smart apps.

EXIT. Exits the on-screen menu.

AUDIO. Selects the desired Audio

mode. Stereo, Mono, or SAP (when
available.)

RESET. Pressing it twice restores your
HDTV to its factory settings. All user
customized settings will be cleared.

PIX SHAPE. Cycles through the various
aspect ratios. The different settings
either stretch, zoom, or fill the image
on your screen. Bars may appear on
top and bottom of your screen (or on
left and right sides) depending on the
broadcasted signal or program.

INFO. Displays the Channel Information
banner.

SLEEP. Displays the “Off” Timer. While
Off Timer is on-screen, press the “0”
key to Set the amount of time (in 30
minute increments) at which the HDTV
will turn off.

CAPTION. Cycles through the available
Caption modes (when available.)

PLAY/PAUSE, REW, FF. Operate the
playback functions (when available.)

Captioning is textual information trans­mitted along with the picture and
sound. Turning Captioning ON (by
pressing the CAPTION key during nor­mal TV viewing) causes the HDTV to
open these captions and superimpose
them on the screen.

NOTE: Local broadcasters decide
which caption signals to transmit.

Use the CURSOR  and keys to
modify Font, Background, and
Foreground of digital caption text.

Digital Caption

Choose mode depending on the TV’s
location or your preferences.

Home Mode - For saving energy and
power consumption reduction.

Store Mode - High brightness and
contrast for display at retailer store.

Demo Mode - High brightness and
contrast plus TV feature demonstration.

NOTE: Only Home Mode qualifies for

Energy Star.

Mode (Home/Store)

MHL

When connecting a MHL-compatible
device to the TV’s HDMI2 (MHL) input it
allows for two-way communication.

NOTE: TV will turn to HDMI 2 input
automatically when connecting a MHL­compatible device.

TV’s remote control can be used to
control most of the MHL-compatible
device’s on-screen features.

MHL-compatible device can be
charged through HDMI2 even if the TV
is turned off (stand-by mode.)

ROKU

Connect the Roku Streaming Stick
(sold separately) to HDMI2 (MHL) input
to quickly enable Smart TV applica­tions like video streaming and gaming.

NOTE: Internet Service needed for Roku

device setup and configuration.

Find out more about Roku Streaming
Stick at www.roku.com/sanyo

Display the On Screen menu and use
the CURSOR keys to select

Sound. Press ENTER.

Auto – Sound settings are linked

to the current Picture option and
parameters are adjusted accordingly.

Dynamic, Mild, Standard –
Predetermined sound parameters not
linked with any Picture option.

AUDIO OUT SETTINGS

•

ARC/CEC: Allows Audio signal output

via HDMI1 to an external AV system.

•

Analog Out: Allows Audio signal out-

put via the L/R OUTPUT AUDIO jacks.

NOTE: TV speakers will be disabled
when using external audio system.

MANUAL SOUND SETTINGS

The Manual option provides different
parameters that can be personally
adjusted:

•

Bass & Treble • Bass Boost

•

Detailed Setting: Equalizer

Disposal may be regulated in your community due to environmental considerations.
For disposal or recycling information, please visit http://www.mrmrecycling.com or call
1-888-769-0149 for information on Sanyo’s recycling program.