Sanyo DBA150 Specifications

Page 1
Ordering number : ENN2222C
DBA150
Diffused Junction Silicon Diode
DBA150
15.0A Single-Phase Bridge Rectifier
Features
Plastic molded structure.
Glass passivation for high reliability.
Peak reverse voltage : V
Average rectified current : I
RM
O
=15A.
Package Dimensions
unit : mm
1170
[DBA150]
9
18
4.5
26.5 max
14.4
26.5 max
6.35
7.2
2.4
0.8 11
25 max
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions DBA150C DBA150G Unit Peak Reverse Voltage V Average Recitified Current I
Surge Forward Current I Junction T emperature Tj 150 °C Storage T emperature T stg --40 to +150 °C Insulation Voltage V
RM
O
FSM
IS
T a=40 °C 4.5 A Ta=40°C, with a 2702703.0mm3 Cu fin 15.0 A 50Hz sine wave, 1 cycle 200 A
200 600 V
2kV
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions
Forward Voltage V Reverse Current I Thermal Resistance Rth(j-c) Junction-Case 2.3 °C/W
Note : Tightening torque : 0.98N·m max.
: Per constituent element of bridge.
Note
F
R
IF=7.5A VR : At each V
RM
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
Ratings
min typ max
1.05 V 10 µA
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
41000 GI IM / 52098 HA (KT) / 82595 GI (KOTO) 3019 TA, TS
No.2222-1/2
Unit
Page 2
DBA150
I
16
With fin
14
-- A
12
O
10
IO -- Ta
Resistive, inductive load
Capacitive load
With a 2702703mm
Cu fin
3
-- A
FSM
240
200
160
FSM
-- n
8
6
No fin
4
Average Rectified Current, I
2
0
0 20 40 60 80 100 120 140 160
Resistive, inductive load
Capacitive load
Ambient Temperature, Ta -- °C
I
-- V
F
5
3
2
F
-- A F
10
7 5
3
Forward Current, I
2
1.0
0.4 0.6 1.00.8 1.2 1.4
Forward Voltage, V
Ta=150°C
25°C
F
-- V
ID01175
ID01177
120
80
40
Surge Foward Current, I
0
2537 2 2537
1.0 10
50Hz
Number of Cycles at 50Hz, n
100
ID01176
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of April, 2000. Specifications and information herein are subject to change without notice.
No.2222-2/2
PS
Loading...