Sanyo DAS-202 User Manual
1
INSTRUCTION MANUAL
Please read this operation manual before using your new
answering machine and keep it for further reference
DAS 202
Fully Digital
Answering
System
2 3
QUICK INSTRUCTIONS
• Setting the Time
– Press and hold ‘STOP/TIME’ to enter the SET CLOCK mode
– Press the FF c Key or the REPT d Key to adjust the day
– Press ‘STOP/TIME’ again to set the day
– Repeat to set Hours and Minutes
• Playing the Current Time
– Press
‘
STOP/TlME’
• Recording the Outgoing Message (OGM)
– Press and hold ‘OGM1’
– Speak clearly into the microphone with your message
– Press ‘STOP/TIME’ to stop recording
– Repeat the process for ‘OGM2’
• Recording a Memo
– Press and hold ‘MEMO/2WAY’ for 2 seconds
– Speak clearly into the microphone with your message
– Press ‘STOP/TIME’ to stop recording
• 2 Way Recording
– Press and hold ‘MEMO/2WAY’ for 4 seconds
– Have a normal conversation on your telephone
– Press ‘STOP/TIME’ to stop recording
• Playing a Memo
– Press ‘MEMO/2WAY’ or ‘PLAY’
• Setting to Answer/Record Mode or Answer Only Mode
– If the system is in Answer Only Mode, press and hold ‘ANSWER’ for about
2 seconds.
– The DAS 202 will beep and OGM1 will play.
– Repeat the process to return the system to ANSWER ONLY MODE.
– The DAS 202 will beep and OGM2 will play
• To turn on/off the answering system, press ‘ANSWER’
• Playing Messages
1. Playback Press ‘PLAY’
2. Pause Message Press ‘PLAY’
3. Resume Playback from Pause Press ‘PLAY’
4 5
4. Repeat Message Press ‘REPT d’ once to replay
current message, twice to replay
the previous message
5. Skip Message Press ‘FF c’ once to skip the
current message, multiple times to
skip through more than one message
6. Erase Single Message Press ‘ERASE’ while message
is playing
7. Stop Playback Press ‘STOP/TIME’
8. Erase and Save ALL Messages Press and Hold ‘ERASE’ to erase
ALL
Messages. T o r estore or save all messages,
press and hold ‘ERASE’ again
• 40-Minute Total Recording Time
– The DAS 202 has 40-minute memory capacity in total to record your outgoing
messages, incoming message, memos and 2-way conversation.
• Security Code Remote Control
– Refer to “Remote Control Functions Table” on Page 12/13.
1. Message LED Indicator – Indicates the DAS 202 Answering Machine’s
current status.
• ‘A1’ or ‘A2’ flashes four times on the display to indicate that there is no
outgoing message (greeting) recorded.
• ‘CL’ flashes once on the display to indicate that the time is not set
• A ‘Number’ displayed before playing your messages back indicates the
total number of messages currently in the DAS-202’s Memory.
• A ‘Number’ displayed while playing your messages back indicates the
sequential number of the message currently being played.
2. MEMO/2WAY Key – Allows you to leave messages for other family
members when you leave the house. Also allows you to record both sides of
a
conversation you are having on the telephone.
3/4.OGM1/OGM2 Keys –The DAS 202 allows you to record two outgoing
messages. OGM1 is a conventional message, and OGM2 is an “answer only”
message. The DAS 202 will automatically switch to the OGM2 message if
your memory is full and the unit is unable to take a message.
5. ANSWER LED Indicator – Lights up when the DAS 202 is ready to
answer calls, and flashes when you have messages.
6. STOP/TIME Key – Stops current operation, plus allows you to either set
the time or hear the current time.
7. PLAY Key – Press to play recorded messages.
8. REPT d Key – Repeats the current or previously played message.
14
15
16
1
2345678910
11
12
13
LOCATION AND FUNCTION OF CONTROLS
R
E
W
S
N
A
MEMO/2WAY
OGM1
OGM2
REPT
FF
TIME
STOP
ERASE
PLAY
Loading...