Sanyo CE42LM4WPN-NA - CE - 42"" LCD Flat Panel Display Specifications

Page 1
42V Weatherproof NETWORKABLE LCD MONITOR
CE42LM4WPN-NA
Weatherproof LCD Monitor
SANYO has used all of its expertise in creating a lightweight aluminum framed LCD monitor which is protected by anti reflected tamper glass. This means that the SANYO weatherproof monitor can be used in a wide variety of
environments due to it having approval. The SANYO weatherproof LCD will make the ideal display for the pub courtyards and gardens (perfect due to the recent no-smoking lows), Digital signage, Industries and public display
IP56 weather-resistant
EXTENSIVE INPUT & OUTPUT TERMINALS
The 42LM4WPN has various input and output terminals including component(Y,Pb,Pr) or RGBHV input and output with 5-BNC, composite video input and output with BNC, and RS­232 control port (serial D-Sub 9) input and output which offer the daisy chain connection. There are computer inputs (a D­Sub 15 RGB terminal) and HDMI input with HDCP for High definition signals. There are also jacks for an external audio amp and speakers system (RCA).
ANTI REFLECTION TAMPER GLASS
The 42LM4WPN has a tough anti refection tampered glass. This offers the protection for the panel surface in the public display circumstance. The glass is approx. 1/10 less reflection and 5 times tougher than the usual float glass.
ALUMINUM CABINET & NON HOLES DESIGN
The 42LM4WPN uses Anodized aluminum the same materials as a sailing boat and it has quite unique ‘Non-Holes’ ventilation design which protect against mischief in the public display applications and less maintenance from dust and oil circumstance
OPTIONAL PJ-NET ORGANIZER
An optional network box (POA-LN01) makes it possible to use the 42LM4WPN as a network monitor, using your internet browser to monitor and control the display's properties. Additional software is not required.
Type Liquid Crystal Display Panel Screen Size 42V (Landscape / Portrait use available)
Aspect Ratio 16:9 Resolution WXGA 1366 (H) x 768 (V) Brightness Contrast Ratio 800:1 (typical) Viewing Angle 178° (Vertical/Horizontal) Panel tilt angle 90 degree tilt available (panel downward) Response Time 8ms (gray to gray) Computer Compatibility VGA, SVGA, XGA, SXGA, WXGA, UXGA Audio Amp N/A Speaker N/A Input Terminals
AV1 AV2 Component (Y,Pb,Pr) / RGBHV (BNC x 5)
AV3 Video (BNC x1) Computer 1 RGB (D-Sub 15) HDMI HDMI v1.1 w/HDCP RS-232 Serial (D-Sub 9)
Output Terminals
AV2 AV3 Video (BNC x1) Audio Monitor Output Audio (RCA x 2)
RS-232 Serial (D-Sub 9) Power Supply AC 100-240V 50-60Hz Power Consumption 225W Operation Temperature Operation 32-115
Operation Altitude Up to 13, 124ft (4,000m) Dimensions (WxHxD) 41.3” x 25.7” x 6.4” (w/o Option) Net Weight 82 lbs. (w/o Option) Included Accessories Owner's Manual; Remote Control w/Batteries;
Optional Accessories PJ-Net Organizer (POA-LN01) IP Rating IP56 Weather Proof Safety UL60950 2003
FCC Rating FCC Part15 classB Caution:
Due to product design considerations, please consult with a qualified installation engineer prior to monitor ceiling mounting. Ceiling mounting must be such so the ambient temperature does not exceed 104°F and that the proper side-supporting bracket, specifically designed for ceilings, is used.
Because its products are subject to continuous improvement, SANYO reserves the right to modify product design and specifications without notice and without incurring any obligations. It is not recommended to install the screen in direct sunlight without adequate shading. Using in direct sunlight may cause a black shadow to appear on the screen and will disappear when panel temperature goes down.
Specifications
Portrait is turning clockwise in 90 degree)
500 (cd/m2 for panel)
Video / Audio (Scart)
Audio (RCA x 2)
Component (Y,Pr,Pb) / RGBHV (BNC x 5)
Audio (RCA x 2)
Continuous Operation -5 -115°F
AC Power Cord
CAN/CSA-C22.2
Issued 06/08 © 2008 SANYO
Rear Input Panel
Optional PJ-Net Organizer (POA-LN01)
Loading...