Sanyo CE42LM4N-NA User Manual

42V ROBUST NETWORKABLE LCD MONITOR

CE42LM4N-NA

Robust LCD Monitor

ROBUST LCD MONITOR

SANYO has used all of its expertise in creating a lightweight aluminum framed LCD monitor which is protected by non-glare acrylic panel. This means that the SANYO robust monitor can be used in a wide variety of environments for dusty and oily circumstance such as fast food, digital signage, industrial and public display

EXTENSIVE INPUT & OUTPUT TERMINALS

The 42LM4N has various input and output terminals including component (Y,Pb,Pr) or RGBHV input and output with 5-BNC, composite video input and output with BNC, and RS-232 control port (serial D-Sub 9) input and output which offer the daisy chain connection. There are computer inputs (a D-Sub 15 RGB terminal) and HDMI input with HDCP for High definition signals. There are also jacks for an external audio amp and speakers system (RCA).

NON GLARE ACRYLIC PANEL

The 42LM4N has a non glare acrylic panel. This offers the protection for the panel surface in the public display applications and easy to clean the panel.

ALUMINUM CABINET & NON HOLES DESIGN

The 42LM4N uses Anodized aluminum and it has quite unique ‘Non-Holes’ ventilation design which protects against mischief in the public display applications and less maintenance when used in a dusty or oily environment.

OPTIONAL PJ-NET ORGANIZER

An optional network box (POA-LN01) makes it possible to use the 42LM4WPN as a network monitor, using your internet browser to monitor and control the display's properties. Additional software is not required.

Type Liquid Crystal Display Panel Screen Size 42V (Landscape / Portrait use available)

Aspect Ratio 16:9 Resolution WXGA 1366 (H) x 768 (V) Brightness Contrast Ratio 800:1 (typical) Viewing Angle 178° (Vertical/Horizontal) Panel tilt angle 90 degree tilt available (panel downward) Response Time 8ms (gray to gray) Computer Compatibility VGA, SVGA, XGA, SXGA, WXGA, UXGA Audio Amp N/A Speaker N/A Input Terminals

AV1 AV2 Component (Y,Pb,Pr) / RGBHV (BNC x 5)

AV3 Video (BNC x1) Computer 1 RGB (D-Sub 15) HDMI HDMI v1.1 w/HDCP RS-232 Serial (D-Sub 9)

Output Terminals

AV2 AV3 Video (BNC x1) Audio Monitor Audio (RCA x 2)

RS-232 Serial (D-Sub 9) Power Supply AC 100-240V 50-60Hz Power Consumption 225W Operation Temperature 32 – 115 °F Operation Altitude Up to 13, 124ft (4,000m) Dimensions (WxHxD) 41.3” x 25.7” x 5.9” (w/o Option) Net Weight 78 lbs. (w/o Option) Included Accessories Owner's Manual; Remote Control w/Batteries;

Optional Accessories PJ-Net Organizer (POA-LN01) Safety UL60950 2003

FCC Rating Class B, UL Listed

Caution:

Due to product design considerations, please consult with a qualified installation engineer prior to monitor ceiling mounting. Ceiling mounting must be such so the ambient temperature does not exceed 104°F and that the proper side-supporting bracket, specifically designed for ceilings, is used.

Because its products are subject to continuous improvement, SANYO reserves the right to modify product design and specifications without notice and without incurring any obligations. It is not recommended to install the screen in direct sunlight without adequate shading. Using in direct sunlight may cause a black shadow to appear on the screen and will disappear when panel temperature goes down.

Specifications

Portrait is turning clockwise in 90 degree)

500 (cd/m2 for panel)

Video / Audio (Scart)

Audio (RCA x 2)

Component (Y,Pr,Pb) / RGBHV (BNC x 5)

Audio (RCA x 2)

AC Power Cord

CAN/CSA-C22.2

Rear Input Panel

Optional PJ-Net Organizer (POA-LN01)