Sanyo CE32LD17E-B User Manual
INSTRUCTION MANUAL
LCD Television
CE32LD17E-B
1 - 32
ENGLISH
Please read this Instruction book before using your television.
We wish you many hours of pleasure from your new television.
Problems with set-up?
Call 0844 335 2230
Contents
Features ................................................................. 2
Introduction ............................................................. 2
Preparation ............................................................. 2
Safety Precautions ................................................. 2
Waste Disposal ................................................... 3
FOR EU USERS ................................................. 3
Licence Notifi cation ............................................ 4
TRADEMARK ACKNOWLEDGMENT ................ 4
Connection to a Television Distribution System
(Cable TV etc.) from Tuner ................................. 4
Package Contents .................................................. 4
Environmental Information ..................................... 5
Detachable Stand Installation Method .................... 6
Detachable Stand Uninstallation Method ............... 6
Remote Control Buttons ......................................... 7
LCD TV and Operating Buttons .............................. 8
Viewing the Back side Connections ....................... 8
Viewing the Connections - Side Connectors .......... 9
Power Connection .................................................. 9
Aerial Connection ............................................... 9
Using the Cable Holder ........................................ 10
Using Digital Multimedia Connectors.................... 10
USB Memory Connection ................................. 10
Connecting the LCD TV to a PC ........................... 10
Using Side AV Connectors ................................... 10
Connecting to a DVD Player..................................11
Using Other Connectors ........................................11
Remote Control Handset .......................................11
Inserting Batteries ..............................................11
Switching On/Off ................................................... 12
To Switch the TV Off ......................................... 12
Digital Teletext (** for UK only) ......................... 12
Analogue Teletext ............................................. 12
Input Selection ...................................................... 12
Operation with the Buttons on the TV ............... 12
Operation with the Remote Control .................. 13
First Time Installation............................................ 14
Auto Tuning .......................................................... 15
Auto Channel Scan Menu Operation ................ 15
Manual Tuning ..................................................... 15
Digital Manual Search....................................... 15
Analogue Manual Search ................................. 15
Analog Fine Tune.............................................. 16
Clear Service List (*) ......................................... 16
Managing Stations: Channel List .......................... 16
Operating the Channel List ............................... 16
Moving a Channel ............................................. 16
Deleting a Channel ........................................... 16
Renaming a Channel ........................................ 16
Locking a Channel ............................................ 17
Managing Stations: Favourites ............................. 17
Button Functions ............................................... 17
English - 1 -
Managing Stations: Sorting Channel List ............. 17
On-Screen Information ......................................... 17
Media Playback Using Media Browser ................. 18
Viewing Videos via USB .................................. 18
Viewing Photos via USB ................................... 18
Media Browser Settings .................................... 19
Changing Image Size: Picture Formats ................ 19
Confi guring Picture Settings ................................. 20
Operating Picture Settings Menu Items ............ 21
Picture Settings Menu Items ............................. 21
PC Picture Settings........................................... 21
Confi guring Sound Settings .................................. 21
Operating Sound Settings Menu Items ............. 21
Sound Settings Menu Items.............................. 22
Confi guring Your TV’s Settings ............................. 22
Operating Settings Menu Items ........................ 22
Settings Menu Items ......................................... 22
Using a Conditional Access Module ..................... 22
Viewing Conditional Access Menu (*) ............... 23
Confi guring Language Preferences ...................... 23
Parental Control.................................................... 24
Parental Settings Menu Operation (*) ............... 24
Timers ................................................................... 24
Setting Sleep Timer .......................................... 24
Setting Programme Timers ............................... 24
Confi guring Date/Time Settings ............................ 25
Confi guring Source Settings ................................. 25
Confi guring Other Settings ................................... 25
Operation .......................................................... 25
Other Features ..................................................... 26
Teletext ................................................................. 27
Tips ....................................................................... 27
Appendix A: PC Input Typical Display Modes ....... 28
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) .............................................. 28
Appendix C: Supported DVI Resolutions.............. 29
Appendix D: Supported File Formats for USB
Mode..................................................................... 29
Appendix E: Software Upgrade ............................ 30
Specifi cations ....................................................... 31
Digital Reception (DVB-T) .................................... 31
Important Instruction ............................................. 32
Features
Remote controlled colour LCD TV.•
Fully integrated Terrestrial digital TV (DVB-T - MPEG2) •
(DVB-T- MPEG4).
HDMI connectors for digital video and audio. This •
connection is also designed to accept high defi nition
signals.
USB input.•
1000 programmes (analogue+digital).•
OSD menu system.•
Integrated tuner DVB-T HD, MPEG 2 / MPEG 4 •
compatible.
Scart socket for external devices (such as video, •
video games, audio set, etc.).
Stereo sound system. (German+Nicam)•
Teletext, fastext, TOP text.•
Headphone connection.•
Automatic programming system.•
Forward or backward manual tuning.•
Sleep timer / Child lock.•
Automatic sound mute when no transmission.•
NTSC playback. •
AVL (Automatic Volume Limiting).•
Auto power down.•
PLL (Frequency Search).•
PC input. •
Plug&Play for Windows 98, ME, 2000, XP, Vista.•
Game Mode •
Introduction
Please read the corresponding instructions of this
handbook prior to the fi rst usage of the device, even
when the usage of electronic devices is familiar
to you. Notice especially the chapter SAFETY
PRECAUTIONS. Carefully keep the handbook as
future reference. When selling the device or giving it
away, absolutely give these direction for use.
Thank you for choosing this product. This manual will
guide you for the proper operation of your TV.
Before operating the TV, please read this
manual thoroughly. Please do keep this
manual in a safe place for future references.
This device is intended to receive and display TV
programs. The different connection options make
an additional expansion of the reception and display
sources possible (receiver, DVD player, DVD
recorder,
VCR, PC etc.). This device is only suitable for the
operation in dry interiors. This appliance is intended
solely for private domestic use and may not be used
for industrial and commercial purposes. We exclude
liability in principle, if the device is not used as
intended, or unauthorized modifi cations have been
made. To operate your LCD TV in extreme ambient
conditions may cause the damage of the device.
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top of
the set. Use this device in moderate climates.
Safety Precautions
Read the following recommended safety
precautions carefully for your safety.
Power Source
The TV set should be operated only from a 220-240
V AC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
English - 2 -
10 cm
10 cm
10 cm
Power Cord
Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not unplug the appliance by
pulling from the power cord and never touch the power
cord with wet hands as this could cause a short circuit or
electric shock. Never make a knot in the cord or tie it with
other cords. The power cords should be placed in such a
way that they are not likely to be stepped on. A damaged
power cord can cause fi re or give you an electric shock.
When it is damaged and needs to be replaced, it should
be done by qualifi ed personnel.
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen, and near the washing
machine). Do not expose this device to
rain or water, as this may be dangerous
and do not place objects filled with
liquids, such as fl ower vases, on top.
Avoid from dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualifi ed personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid
or aerosol cleaners. Use soft and dry
cloth.
Ventilation
The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation. To prevent
overheating, these openings must not be blocked or
covered in anyway.
Heat and Flames
The set should not be placed near to
open fl ames and sources of intense heat
such as an electric heater. Ensure that
no open fl ame sources, such as lighted
candles, are placed on top of the TV. Batteries should
not be exposed to excessive heat such as sunshine,
fi re or the like.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specifi ed by the manufacturer or have the
same specifi cations as the original one. Unauthorized
substitutions may result in fi re, electrical shock or
other hazards.
English - 3 -
Servicing
Please refer all servicing to qualifi ed
personnel. Do not remove the cover
yourself as this may result in an electric
shock.
Waste Disposal
Instructions for waste disposal:•
Packaging and packaging aids are recyclable and •
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
Batteries, including those which are heavy metal-•
free, should not be disposed of with household
waste. Please dispose of used battery in an
environment friendly manner. Find out about the
legal regulations which apply in your area.
Cold cathode fluorescent lamp in LCD PANEL •
contains a small amount of mercury; please follow
the local laws or regulations for disposal.
FOR EU USERS
The symbol mark and recycling
systems described below apply
to EU countries and do not apply
to countries in other areas of the
world.
Your SANYO product is designed
and manufactured with high quality
materials and components which
can be recycled and/or reused.
The symbol mark means that electrical and electronic
equipment, batteries and accumulators, at their endof-life, should be disposed of separately from your
household waste.
Note:
If a chemical symbol is printed beneath the symbol
mark, this chemical symbol means that the battery
or accumulator contains a heavy metal at a certain
concentration. This will be indicated as follows: Hg:
mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection
systems for used electrical and electronic equipment,
batteries and accumulators.
Please, dispose of them correctly at your local
community waste collection/recycling centre.
Please, help us to conserve the environment we live in!
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Headphone Volume
Excessive sound pressure from earphones
and headphones can cause hearing loss.
SCREEN
LANG
SUBTTL
PIP
1 2 3
4 65
97 8
0
RETURN
MENU
EPG FAV
SOURCE
PRESETS
SLEEP
INFO/?
++
--
V
OK
V
--
++
Installation
To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).
LCD Screen
The LCD panel is a very high technology product with
about a million thin fi lm transistors, giving you fi ne
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fi xed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning! Do not leave your TV in standby or operating
mode when you leave your house.
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
Device connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
coaxial cable, may in some circumstances create a
fi re hazard.
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
Package Contents
LANG
SUBTTL
SCREEN
PIP
EPG
SLEEP
PRESETS
The Standby / On button doesn´t separate this
device completely from mains. Moreover the device
consumes power in the standby operation. In order to
separate the device completely from mains, the mains
plug has to be pulled from the mains socket. Because
of that the device should be set up in a way, that an
unobstructed access to mains socket is guaranteed,
so that in case of emergency the mains plug can be
pulled immediately. To exclude the danger of fi re, the
power cord should principally be separated from the
mains socket prior to a longer period of non-usage,
i.e. during vacations.
Electrical device not in the hands of children
Never let children use electrical device unsupervised.
Children can´t always recognize properly the
possible dangers. Batteries / accumulators can be
life threatening when swallowed. Store batteries
unreachable for small children. In case of swallowing
a battery medical aid has to be sought immediately.
Also keep the packaging foils away from children.
There is danger of suffocation.
Licence Notifi cation
Manufactured under license from Dolby
Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
LCD TV
P
P
SOURCE
OK
RETURN
MENU
Batteries: 2 X AAA
INFO/?
Remote
Control
Cable Holer
Instruction Book
1 X Video & Audio
Connection Cable
Note: You should check the accessories after
purchasing. Make sure that each accessory is
included.
English - 4 -
Environmental Information
• This television is designed to consume less energy to save environment.
You not only help to save the environment but also you can save money by reducing electricity bills thanks to the
energy effi ciency feauture of this TV. To reduce energy consumption, you should take the following steps:
• You can use Power Save Mode setting, located in the Setting menu. If you set Power Save Mode as On, the
TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level. Note
that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
• When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce
energy consumption.
• Disconnect power when going away for longer time.
• Note that annually,using the TV set in Power Save Mode has more power effi ciency than disconnecting the
TV from the mains plug instead of keeping stand-by mode. Therefore it is highly recommended to activate
Power Save Mode setting to reduce your annual power consumption.And also it is recommended to disconnect
the TV from the mains plug to save energy more when you do not use.
• Please helps us to save environment by following these steps.
Repair Information
Please refer all servicing to qualifi ed personnel. Only qualifi ed personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV for further information.
English - 5 -
Detachable Stand Installation Method
Stand is placed on a fl at surface.1.
The product is hold over the stand so that it concides with the stand mounting point and 2.
then it is left to be mounted with its own weight.
Detachable Stand Uninstallation Method
TV is laid on a fl at table so that backcover will be on topside.1.
Clamps on the stand are pushed.2.
Stand is pulled back.3.
Stand is detached.4.
English - 6 -
Remote Control Buttons
SCREEN
LANG
SUBTTL
PIP
1 2 3
4 65
97 8
0
RETURN
MENU
EPG
FAV
SOURCE
PRESETS
SLEEP
INFO/?
OK
--
V
--
++
V
++
Mono/Stereo - Dual I-II / Currrent Language (*) 1.
(in DVB channels)
Image size / Zooms videos (in Media Browser 2.
video mode)
Electronic programme guide (in DTV mode)3.
Favourite Mode Selection (in DTV mode)4.
Red button / Stop (in Media Browser)5.
Green button / List Schedule (in EPG) / Tag / 6.
Untag All (in favourite list) / Play-Slideshow (in
Media Browser)
Numeric buttons 7.
Teletext / Mix (in TXT mode)8.
Volume Down9.
Programme Down / Page up (in DTV mode)10.
Mute11.
Navigation buttons12.
Exit / Return / Index page (in TXT mode)13.
Menu14.
Info / Reveal (in TXT mode)15.
Okay (Confi rm) / Hold (in TXT mode) / Edit 16.
Channel List
AV / Source Selection17.
Programme Up / Page down (in DTV mode)18.
Volume Up19.
Previous programme20.
Yellow button / Pause (in Media Browser) / 21.
Timeline Schedule (in EPG)
Blue button / Edit Channel List / Filter (İn 22.
Favourite List&EPG) / Loop-Shuffl e (in Media
Browser)
Picture mode selecion / Changes picture mode 23.
(in Media Browser video mode)
Sleep Timer24.
No function25.
Subtitle on-off (in DVB channels)26.
Standby / On27.
27
26
1
LANG
2
SCREEN
3
SUBTTL
PIP
EPG
FAV
PRESETS
SLEEP
4
5
6
25
24
23
22
21
7
8
9
10
11
P
P
SOURCE
20
19
18
17
16
RETURN
OK
MENU
INFO/?
15
12
13
14
You can use numeric buttons on the remote control
to input letters when necessary. Pressing the numeric
buttons ‘0...9’ inputs letters assigned to that button.
Letters are present one by one as the button is
pressed. Table below shows the assigned letters:
1/ABC
2/DEF
3/GHI
4/JKL
5/MNO
6/PQR
7/STU
8/VWX
9/YZ
English - 7 -
LCD TV and Operating Buttons
FRONT and REAR VIEW Control buttons VIEW Control Buttons
1. Standby/On button
2. TV/AV button
MENU TV/AV
P
3. Programme Up/Down buttons
4. Volume Up/Down buttons
MENU
TV/AV
P
Note: Press “
buttons at the same time to view
” and
main menu.
Viewing the Back side Connections
SCART 21. inputs or outputs for external devices.
SCART 1 2. input or output for external devices. Connect the SCART cable between SCART socket on
TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV
mode.
Note: To connect external device,please use to supplied scart connection cable .
Component Video Inputs (YPbPr)3. are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”,
“Pb”, “Pr” correspond with your device’s connectors.
PC/YPbPr Audio Inputs4. are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr. Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output
of your PC to enable PC audio. Connect the audio cable between AUDIO INPUTS on the TV and audio
English - 8 -
outputs of your device to enable component audio.
S/PDIF Coaxial Out5. outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input
RF Input6. connects to an aerial antenna system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
PC Input7. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC
HDMI 1: HDMI Input8.
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of
displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.
HDMI 2: HDMI Input9.
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the 1.
channels that you subscribe to. For more information, see “Conditional Access”
section.
Side USBs2.
Headphone jack is used for connecting an external headphone to the system. 3.
Connect to the HEADPHONE jack to listen to the TV from headphones .
Side audio-video connection4. input is used for connecting video and audio
signals of external devices. To make a video connection, you must use the
supplied AV connection cable for enabling connection. First, plug singular jack of
the cable to the TV’s Side AV socket. Afterwards, insert your video cable’s (not
supplied) connector into the YELLOW input (located on the plural side) of the
supplied AV connection cable. Colours of the connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side
AV connection cable. Afterwards, insert your device’s audio cable’s connectors
into the RED and WHITE jack of the supplied side AV connection cable. Colours
of the connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE)
to enable sound connection when connecting a device to your TV by using PC or COMPONENT
VIDEO input.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the •
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.•
English - 9 -
Using the Cable Holder
You can use the supplied cable holder as the
following:
Place the cable holder into the cable holder hole •
located on the rear side of the TV as illustrated
above.
Place cables into the cable holder after all necessary •
connections are made.
Using Digital Multimedia
Connectors
You can connect USB devices to your TV by using •
the USB inputs of the TV. This feature allows you
to display/play JPG, MP3 and video fi les stored in
a USB stick.
It is possible that certain types of USB devices (e.g. •
MP3 Players) may not be compatible with this TV.
You may back up your fi les before making any •
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any fi le damage or data loss.
Do not pull out USB module while playing a fi le.•
CAUTION: Quickly plugging and unplugging USB
devices, is a very hazardous operation. Especially,
do not repeatedly quickly plug and unplug the
drive. This may cause physical damage to the USB
player and especially the USB device itself.
SIDE VIEW USB MEMORY
USB
5Vdc
Max:500mA
USB Memory Connection
IMPORTANT: The TV should be switched off while
plugging or unplugging a USB device. Plug your
USB devices to the USB input of the TV. You can
connect a usb device to your TV by using the USB
input of the TV.
Note: It is possible certain types of hard disk drives
are not supported.
English - 10 -
Connecting the LCD TV to a PC
For displaying your computer’s screen image on your
LCD TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use 15-pin D-sub display cable to
connect a PC to the LCD TV. When the connection
is made, switch to PC source. See “Input selection”
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix parts.
Audio
Inputs
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
Using Side AV Connectors
You can connect a range of optional equipment to your
LCD TV using side connectors of the TV.
For connecting a camcorder or camera , you should •
use AV socket (side). To do this,
supplied video/audio connection cable. First, plug
single jack of the cable to the TV’s AV I N socket
(side). Afterwards, insert your camera cable’s (not
supplied) connectors into the plural part of the video/
audio connection cable. Colours of the connected
jacks should match. See illustration below.
Afterwards, you should switch to • Side AV source. See
the section Input selection in the following sections
for more information.
AVConnection
Cable (supplied)
SIDE AV
Headphone
To listen the TV sound from headphones, you •
should connect headphones to your TV by using the
HEADPHONE jack as illustrated above.
PC Input
PC RGB cable
(not supplied)
to PC input
you must use the
AVCable
(not supplied)
Camera
Loading...