Sanyo CE32LD17E-B Quick Start Guide
Quick Start Guide
50175161
CE32LD17E-B
Insert the batteries into the handset
1
Insert two AAA/R3 or
equivalent type batteries
inside. Observe the
correct polarity (+/-) when
inserting batteries and
replace the battery cover.
Connect the aerial straight to your TV
2
REAR OF THE TV
Connect the TV to the mains socket
3
UK plug
-
+
Set Top Box
connection
To switch the TV on
4
After setting the options using the navigation buttons press OK button
to continue. The following message appears on the screen:
+
-
To start automatic search, select “Yes”, to cancel, select “No” and
press OK button. Afterwards, the following OSD will be displayed on
the screen and the digital television will search for TV broadcasts.
(Standby Switch)
• Connect the power cord to the 220-240V AC, 50 Hz.
• Switch the “ ” button to position “|” so the TV will switch to
standby mode. Then the standby LED lights up.
To switch on the TV from standby mode either:
• Press the button, P+ / P- or a numeric button on the remote
control.
• Press the -P/CH or P/CH+ button on the TV. The TV will
then switch on.
Starting Auto Setup Procedure
5
Note: Do not turn off the TV while initializing first time installation.
When the TV is operated for the first time, installation wizard will guide
you through the process. First, language selection screen will be
displayed.
By pressing or buttons highlight the language you want to set and
press “OK”. After then, “First time Installation” menu will appear on
the screen, requiring you to set Country,Teletext Language and Scan
Encrypted options:
touch
Note: You can press MENU button to cancel.
After all the available stations are stored, Channel List will be
displayed on the screen.
insert plug...
...and switch on
If you like the sort channels, according to the LCN(*), please select
Yes and then press OK. Press OK button to quit channel list and
watch TV.
(*) Logical channel number: This means that channels will be sorted
in accordance with the information from the broadcast.
Loading...