Page 1
CE28FWH4-B
CE32FWH4-B
Please read this Instruction book before using your television.
We wish you many hours of pleasure from your new television.
Colour Television
INSTRUCTION MANUAL
Page 2
2
SAFETY
SAFETY
PRECAUTIONS
PRECAUTIONS
Do not allow anything to rest on the power cord. Do not locate
this television receiver where the cord will be damaged by
people walking on it.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation to ensure reliable operation and to protect it from overheating. These openings
must not be blocked or
covered. The opening
should never be covered with a cloth or
other material, and the bottom openings
should not be blocked
by placing the television receiver on a bed, sofa, rug, or other
similar surface. This television receiver
should never be placed
near or over a radiator or heater.
This television receiver
should not be placed in a built-in
installation such as a bookcase unless proper ventilation is
provided.
Do not place your television receiver on an unstable stand, shelf
or table. Serious injury to an individual, and damage to the
television may result if it should fall. Your sales person can
recommend approved stands or shelf and wall mounting
instructions.
If the television is built into a unit, or enclosed, the minimum
distances for ventilation must be maintained. Heat build up can
reduce the life of your television, and can be dangerous.
This television receiver should be operated only from the type of
power source indicated on the television or as indicated in the
Operating Instructions. If you are not sure of the type of power
supply in your home, consult your sales person or your local
power company.
Never add accessories that have not been specifically designed
for this television.
Do not drop or push objects into the television cabinet slots or
openings. Some internal parts carry hazardous voltages and
contact may result in an electric shock hazard.
Never spill liquids
of any kind on the television receiver.
Do not place items such
as vases containing liquid on top of the TV set.
Do not expose the television receiver to rain or use near water.
For example, near a bathtub, kitchen sink, in a wet basement,
etc. Before cleaning, unplug the television receiver from the wall
socket.
Never stand on, lean on or push the
television or its stand.
Never allow
children to play with the television or its
stand. Serious injury may result if it
should fall.
Do not apply liquid cleaners or aerosol
cleaners directly onto the television
receiver. Use a damp cloth for cleaning.
Do not place candles or hot objects
upon the TV, next to it or behind it.
Open flames must never be used near
the TV set.
MINIMUM DISTANCES
Installation
Use
CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety.
But improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver
observe the following basic rules for its installation, use and servicing.
Your television is fully transistorised and does not contain any
user serviceable components.
You must not remove the rear cover of the TV by yourself. The
apparatus is working with high voltages and could damage
objects or even endanger people. Leave all required repair and
service jobs to an authorised service technician. He will exclusively use such spare parts that are complying with the same
safety standards as appliciable to the original parts. The use of
original spare parts can prevent fire, shock and other hazards.
Unplug the television receiver from the wall outlet and refer
servicing to qualified service personnel under the following
conditions:
■ If the power cord or plug is damaged.
■ If liquid has been spilt into the television
receiver.
■ If television receiver has been exposed to rain or water.
■ If the television receiver has been dropped or the cabinet has
been damaged.
■ If the television receiver exhibits a distinct change in performance.
■ If the television receiver does not operate normally by following
the operating instructions.
Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage.
This will often require extensive work by a qualified technician to
restore the television receiver to normal operation.
Servicing
Important:
This equipment is fitted with an approved non rewireable UK mains
plug. To change a fuse in this type of plug proceed as follows:
1. Remove the fuse cover and fuse.
2. Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI
approved type.
3. Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must NOT be used but
replaced with a serviceable plug.
If the fitted plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place. If the mains plug
contains a fuse, this should have a rating of 5 Amp, ensure the fuse
cover is correctly fitted. If a plug without a fuse is used, the fuse at
the distribution board should not be greater than 5 Amp.
Note: The severed plug must be destroyed to avoid a possible
shock hazard should it be inserted into a 13Amp socket elsewhere.
The wires in this mains lead are coloured in accordance with the
following code:
Blue -------> Neutral
Brown ----> Live
1. The Blue wire must be connected to the terminal whichis
marked with the letter “N” or coloured BLACK.
2. The Brown wire must be connected to the terminal with the
letter “L” or coloured RED.
3. Do not connect either wire to the earth terminal in the symbol
or coloured GREEN or GREEN and YELLOW.
Before replacing the plug cover, make certain that the cord grip is
clamped over the sheath of the lead - not simply over the wires.
10cm
20cm
10cm
5cm
!
Page 3
3
Connect your aerial cable socket to the back of the TV set.
Connect the power cord of the TV set to a wall outlet.
✐ The TV set is prepared for a mains voltage AC220~240V, 50Hz.
When the TV set is not to be used for an extended period of time,
it is advisable to disconnect the power cord from the power outlet.
✐ For all aerial problems please consult your local dealer.
● Connecting DVD / VCR player/ Satellite receiver
or Set top box.
We recommend that you connect all other equipment before Plug and
Play. The following examples are our recommended standard connection. For further information please consult your local dealer.
Please refer to individual Instruction Manuals for each piece of equipment for their connection suggestions.
Install two "AA" 1.5 volt batteries so that the "+" and "-" marks on the
batteries match the "+" and "-" marks inside the unit into the remote
control handset.
Press the
Mains on off switch on the front of the TV set.
This TV set provides a self- automatic
tuning function called Plug and Play which
automatically searches and stores all of the
available TV stations in your reception area.
A welcome message will appear, once this has finished the following
screen appears.
To remove the completed message press the
5, 6or 1, 2
buttons.
Now the installation is complete!
After Plug & Play the TV set automatically allocates the following
major stations in the UK.
Position 1 : BBC1
Position 2 : BBC2
Position 3 : ITV
Position 4 : CH4
Position 5 : CH5
Position 6 : SKY, BBC-World, or BBC-Prime.
✐
If any other channels are available in your reception area, the remaining stations will be stored from programme position 7 in sequence as
found.
✐
If you move to another city or cable is installed, please follow the
description “TUNING”. (on page 6).
✐
This procedure only appears the first time you switch on.
Press 5 and 6 to increase or decrease the programme position.
Press 1 or 2 to increase or decrease the sound volume.
■ Front terminals
✐
To select the AV3 mode press the v button repeatedly.
✐
When the headphones are inserted the sound from the TV speakers is muted.
INST
INST
ALLA
ALLA
TION
TION
Step : 1 Connections ( Essential)
Step : 2 Remote control battery installation
AC Mains Outlet
WARNING! High voltages are used in the operation of
this set. Refer service to qualified service personnel.
Step : 3 Switching on / Plug & Play
TV front controls / Terminals
AV2
ANT.75Ω
AV1
TV
AV2
ANT.75Ω
AV1
Thank you for purchasing your SANYO TV.
Now I am searching and storing all programmes.
Please wait.
Auto set-up completed. Happy viewing!
VCR
Set top box
or
Satellite
Option if no DVD
VCR
TV
OUT
IN
DISH
IN
OUT
IN
For satellite
only
DVD
P
Headphone
Jack
AV3 Video/ Audio-input Jacks
From Camcorder
or video game
equipment
Camcorder
Game
equipment
Page 4
4
Standby / Power on-off - To switch the TV ON and OFF.
Direct programme selector
For direct access to programmes using (0-9) numeric buttons.
For selection of programme position 10-99, eg.23, first press
-/-- button and press 2 and 3 numeric buttons.
TV/AV switch
-
To switch TV, AV1, AV2 or AV3 mode press
repeatedly.
Sound mute
To mute the sound from the speakers. The sound changes as
follows; Normal volume -> Half volume -> Mute
Wide - Press to select the following picture modes AUTO -
NATURAL- ZOOM (14:9) - TITLE IN (14:9) - ZOOM (16:9) TITLE IN (16:9) - FULL - NORMAL.
Nicam/Bilingual selector
To switch the sound mode as follows; NICAM or MONO for
nicam stereo programmes. A,B or MONO for nicam bilingual
programmes. You can also select
the sound track L (left), R
(right) or L/R in AV mode.
Picture mode selection -
Press the 9 button repeatedly to select the following
picture modes.
PERSONAL - Personal preference mode.
STANDARD - Normal viewing mode.
ECO - Suitable for dimly lit rooms and gives a cinema - like
effect.
DYNAMIC - Suitable for brightly lit rooms.
Programme information call
To display the programme information.
You can also select colour systems in AV mode as follows
AUTO -> PAL -> NTSC4.43 -> NTSC3.58->
3D surround mode selector
This TV provides an incredible 3 Dimensional sound effect.
Active : Gives the optimum 3D surround effect.
Off : To cut off 3D surround effect.
Optimum positioning
Sit at a distance of approximately 2 to 4 meters from the TV
set. Listen facing the centre of the TV set.
Remove any obstructions between you and the TV set.
Bass expander switch
To get an emphasised bass sound.
Time display
In the TV mode, if the teletext is available the teletext clock will be
displayed on the screen for 5 seconds.
Programme swap
To switch between current and previous programme position
watched.
Menu - To enter and exit sub menus.
Programme down/up
To select the next programme number or previous programme
number. Also operates as up and down cursor.
Level up/down
To adjust the sound volume level. Also operates as left and right
cursor.
F/OK button - Press to store channel selection and mem-
prise selected items.
CS button
To select channels directly. Press button to display current channel
number on the screen. Press button repeatedly until C-- appears and
enter number eg. 5 and 9 for channel 59.
The channel number changes from yellow to red when selected and
when you press the F/OK button it momentarily turns blue. This
shows the channel is stored.
■ VCR / DVD controls
With selected Sanyo DVD/VCR players you can use this remote. The
following table shows all available function buttons for the VCR and
DVD. When you use a compatible Sanyo DVD player, first press and
hold the DVD button and then press your desired function button.
Teletext - This is a free service to give you lots of varied information
such as news, sports results, weather and travel features.
To access this feature press the TXT/TV button the picture
changes from TV - TXT - PAT (Picture and Text side by side)
and back to TV.
Direct access to a page
All the numeric buttons can be used to select a page number
directly. If you need page 301, press 3 then 0 and then 1.
Direct access to subject headings
Coloured boxes are displayed at the bottom of
the screen. the 4 coloured buttons give access
to the corresponding subjects or pages.
Index page selector -
This selects one of the teletext index
pages.
Up / down page access -
Press the button to select the
next page or previous page number.
Sub page access
Some text pages are made up of several sub pages which rotate
automatically. If you wish to view P4 of 8 press the sub page
button. “Subcode ----” will appear. Enter 0004 and it will appear.
Cancel - To view the TV picture in the teletext mode while
waiting for sub page to change or page to update.
Stop -
This stops the sub pages from changing. The symbol
“ ” will appear instead of the page number.
Size switch -
This will make either the top half or the bottom
half of the page expand to fill the whole screen.
Reveal switch -
This reveals hidden items on the teletext page
eg: a hidden answer to a quiz question.
Teletext reception
If your aerial signal is poor, the teletext reception operation may be
erratic.
Teletext brightness level
You can change the teletext brightness level. Please return to TV
mode.(See Picture menu -Text Bright on page 5).
Sound volume control
In teletext mode sound volume and muting can be controlled.
However they are not displayed on the screen.
GENERAL
GENERAL
OPERA
OPERA
TION -
TION -
REMOTE CONTROL
REMOTE CONTROL
General use
Teletext
Sound Status
Off-timer
NICAM
OFF 01:30
03
Programme
Position No.
VCR DVD (blue symbols)
Power Power
Play Play
Pause Pause
Stop Stop
Fast/Cue Next chapter selection
Rewind/Review Previous chapter selection
DVD
n/a
Record, press both buttons at the same time.
n/a DVD command mode selection
OK
n/a Cursor selection
Enter
Page 5
5
Many of your TV’s functions are controlled through the menu function.
During the menu operation follow the bar at the bottom of the
screen with symbols to help you select and adjust settings.
Press
u button to enter and exit the 5 sub menus Picture,
Sound, Timer, Setting and Preset.
When a sub menu is selected its options are displayed and its
colour will change to yellow.
When you have set each Sub menu you can either press
MENU
to exit and clear the screen or press 5 until the sub menu is
re-selected. Using the
7 8 you can rotate again.
Press
7 or 8 buttons and select Picture menu, set the picture
settings for your personal preference.
Use
e or d to select eg. Brightness and 7 or 8 to adjust levels.
Tint : is only useful if NTSC equipment is connected.
Text bright : you can set to minimum, centre or maximum.
Use
e or d to select and 7 or8 to set.
To memorise these settings press the
F/OK button. (The OK? will
change to OK.)
To exit press the
MENU button.
Press the
MENU button and select Sound menu by pressing the
7 or 8 buttons.
Select and adjust to obtain the best sound settings for your environ-
ment using
e or d and 7 or 8 buttons.
To exit press
MENU button.
■ Off-timer setting
The Off timer will switch the TV set into the standby mode when
the selected time has elapsed.
1. Press the
MENU button and select Timer using 7 or 8 but-
tons. Select
OFF Timer using e or d buttons. The complete
line turns yellow.
2.
Press
7 or 8 buttons to select --:-- (highlighted yellow).
3.
Press
e or d buttons to change time.
The time changes in 30 minute steps.The maximum time is 2:00hrs.
4.
Press
7 or 8 buttons to highlight complete line (yellow).
5. Press the
F/OK
button to store your settings.
If you have set the off timer, then one minute before the TV
switches off, a display appears on the screen.
✐
If the TV set is switched off by the on remote control the timer
settings will be cancelled.
Press MENU button to exit, or press 7 to highlight complete line
yellow and then Press
d to set Alarm timer.
■ Alarm timer setting
This function can be set so that an alarm goes off. This only
happens when the TV is switched on. It may remind you to do
something.
1.
Press the MENU button and select Timer using 7 or 8
buttons. Select Alarm timer using e ord buttons. The complete
line turns yellow.
2.
Press the 7 or 8 buttons to select --:--.
3. Press e or d buttons to change time.
The display changes in 5 minute steps and the maximum time
period is 3:00 hours.
4. Press 7 or 8 buttons to highlight complet line (yellow).
5. Press F/OK button to set the Alarm.
When the time period is up, the time up signal will appear on the
screen and the alarm will sound for 15 seconds.
To cancel the Alarm timer press any button and the display will
disappear.
✐
If the TV set is switched off by the on remote control or a
power failure occurs the timer settings will be cancelled.
MENU OPERA
MENU OPERA
TION
TION
Picture menu
Sound menu
Timer menu
MENU
Picture
Sound
Timer
Setting Child lock
Preset
Brightness
Contrast
Colour
Sharpness
Tint
Text bright
memory
Volume
Bass
Treble
Balance
Off Timer
Alarm Timer
AV2
Auto Tuning
Auto sort Start
Prog. Preset
Swap
Fine T uning
ON/OFF
Video/S-video
Auto
Channel
Position
Semi
Channel
Position
Skip
memory
eg.
Timer
Off timer
Alarm timer
Sound
12
0
0
0
Volume
Bass
Treble
Balance
Picture
Brightness
Contrast
Colour
Sharpness
Tint
Text bright
Memory
38
42
19
2
27
MINIMUM/CENTRE/MAXIMUM
OK? / OK
Timer
OFF timer
Alarm timer
- - : - -
- - : - -
Page 6
6
■ Child lock
You can prevent small children from operating the TV with the
front buttons of the TV set.
1. Press the
MENU button and select Setting using 7 or 8
buttons and Child lock using e or d buttons.
2. Set the Child lock to OFF or ON by pressing 7 or 8 buttons.
✐ The child lock mode will be reset to “OFF” when the TV set is
switched off with the
Mains ON/OFF ( I ) switch.
■ AV2 setting
In setting menu, to select AV2 press d and set to Video or SVideo depending on your external equipment. If you use a VCR
which has S-VHS, you should connect it to AV2 and change the
AV2 menu to S-VIDEO.
1. Press 7 or 8 buttons to select.
2. Press MENU button to exit, this automatically stores your
changes.
The preset menu can be used to tune new channels, to reorder
channels and their programme positions, and to make fine adjustments to the tuning.
■ Auto Tuning
1. Press the MENU button and select Preset using 7 or 8
buttons. Select Auto Tuning using e or d buttons. The
complete line turns yellow.
2. Press 8 and select Auto.
3. Press 8 to start, all available channels are automatically
stored, starting from programme position 01.
After completing this procedure, the TV set returns to programme
position “01”.
Position changes sequentially as channels are found.
To cancel this tuning operation, press the
MENU button repeatedly.
✐ You can change the order of the station selection, by using the
channel swapping function detailed later.
■ Auto Sort
1. Press the MENU button.
2. Select Preset, press
e or d buttons
select Auto sort and press
1
.
3. Press F/OK to start automatic sorting and storing of TV stations in
your area. It will sort the channels as in Plug and Play ( See page 3).
To cancel press Menu button repeatedly.
■ Prog. preset.
This is used to preset a received channel in any desired programme
position.
1. Press the MENU button and select Preset, press
e or d buttons
and select
Prog. Preset
.
2. Press
8 to get Semi menu
.
If Channel is not selected press
e or d
, once highlighted press
7 or
8 until the desired channel is found.
The selection changes colour to blue, to say that another channel
has been found.
To change the Position already selected highlight by pressing 6.
Press -/-- and enter 0-9 numbers or
7 , 8
until position is selected.
3. Press 6and select Memory, press F/OK to memorise.
Press MENU button to exit.
●
Skip
Skip ON : in normal operation when the 5 or 6 button is pressed
this position will be skipped.
Skip OFF : Position is not skipped when 5 or 6 button is pressed.
1. Press the MENU button and select Preset, press
e or d buttons
and select
Prog. Preset
.
2. Select Channel that you wish to be skipped or the Position. Select
Skip and choose ON by pressing 7 or 8.
3. Select memory. Press
F/OK
to store.
✐ You can still view a programme position that has been skipped by
using the numeric buttons to select the programme position directly.
Setting menu
Preset menu
MENU OPERA
MENU OPERA
TION
TION
Setting
Child lock
AV2
Preset
Auto Tuning
Auto Sort
Prog. Preset
Swap
Fine Tuning
Auto
Channel
Position
On / Off
Video / S-Video
v
vv
- -
v
v
C31
01
Auto sort
Start
OK?
Semi
Channel
Position
Skip
Memory
C24
01
OFF / ON
OK?
Page 7
7
■ Swap
Use this channel swapping feature to swap the channels between
two stored programme positions. This feature is particularly useful
after automatic tuning.
You have to choose a programme that you wish to swap on the TV
set. eg. Swap programme position 4 and 12.
1. Select programme position eg.4.
2. Press MENU button and select Preset using the 7 or 8
buttons. Select Swap by pressing the e or d buttons.
3. Enter the new position eg.12. Press 1 and 2 numeric buttons.
4. Press the F/OK button to store, the number disappears.
5. Press MENU to exit and they are swapped.
■ Fine tuning
1.
Press the
MENU button and select Preset using 7 or 8
buttons.
2. Press e or d buttons and select Fine tuning.
3. Press and hold 7 or 8 buttons to fine tune channels.
The tuning will be stored when you exit the menu. Press MENU to
exit.
Any changes made by fine tuning will remain even when the TV set
is switched off by Mains Switch, until the channel has been retuned.
■ Switching into /from standby mode
The Standby mode is used for switching the TV set off for short
periods of time. In standby mode the TV is switched off but is
still receiving mains power.
● To turn the TV set into standby mode, press the 44button.
The red power indicator illuminates more brightly
.
● To turn the TV set ON from standby mode, press any of the
following buttons:
44, 55, 66
or 0-9 buttons.
■ Auto shut off
This TV set will automatically switch into the standby mode, 10
minutes after a signal is no longer received. The time until the
set will switch off is displayed on the screen.
■ Use of Audio Output Jacks
This TV provides the audio monitor output jacks on the rear of the
cabinet back. You can connect your audio equipment to these jacks
to give you sound with your audio equipment.
This TV set allows you to set up the following special functions.
■ Maximum volume setting and prohibition of pre-setting
Sets the current volume as the maximum volume level and prohibition of the tuning.
PROHIBITION OFF or PROHIBITION ON
■ Start up programme position
Presets the programme position when the set is switched on.
START POSITION OFF -> Last programme position start
START POSITION P1 -> Programme position "1" start
START POSITION P2 -> Programme position "2" start
You can use the same procedure for P1, P2, P3, etc. to P8, AV.
START POSITION P8 -> Programme position "8" start
START POSITION AV -> "AV1" start
SETTING PROCEDURE
1. Set volume level to maximum requirement.
2. Press and hold the rD button on the Remote control hand-
set and then press the 5 button on the TV set.
3.
Use the 5 or 6 button to highlight the desired option item from
the menu, and select the mode by pressing the 2 or 1 but-
ton.
3. Press the rD button to exit from the menu.
MENU OPERA
MENU OPERA
TION
TION
Preset menu
If you find the power indicator flashing, please turn the TV
set off completely with the Mains ON/OFF switch and
contact our Service desk.
This warning is a sign to let you know that the power
protection function of this TV set is now operating.
To audio equipment
Option settings
PROHIBITION ON
START POSITION OFF
ANT.75Ω
AV2
AV1
Preset
Auto Tuning
Auto Sort
Prog. Preset
Swap
Fine tuning
- -
v
v
vv
v
!
Page 8
8
■ Screen options
Today there are various transmission formats with different size
ratios, eg. 4:3 , 14:9, 16:9 and video formats such as letterbox.
■ AUTO
It automatically switches to the optimum screen mode according to
the WSS signal provided in the receiving signal source. If the signal
does not have it, the TV keeps current screen mode.
✐ This setting may cause the picture to change when a different
format is received eg. when an advert is recieved.
✐ WSS (Wide screen signalling)
Some broadcasters transmit this signal and some VCR tapes have it
included . The signal identifies the picture format ratio (16:9, 14:9, 4:3
etc.).
If WSS is not being received and you are not happy with your picture
this TV provides you the option to change it with the following options.
Press the WIDE button repeatedly to select your desired setting.
OPERA
OPERA
TION
TION
Selecting of picture size
■ NATURAL
■ ZOOM (14:9)
TITLES ON SCREEN
TITLES ON SCREEN
■ TITLE IN (14:9)
■ ZOOM (16:9)
TITLES ON SCREEN
TITLES ON SCREEN
■ TITLE IN (16:9)
■ NORMAL
■ FULL
4:3 14:9 16:9
Letterbox Video
4:3 14:9 16:9
The correct picture
width is maintained
but the top and
bottom are
cropped.
Zooms in slightly
cropping the top
and bottom.
4:3 14:9 16:9
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
Zooms in slightly
cropping the top
and bottom.
TITLES ON SCREEN
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
Letterbox Video
The black bars top
and bottom are
smaller and the
picture height is
compressed slightly.
Letterbox Video
TITLES ON SCREEN
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
Stretches the
picture horizontally
to fill the screen.
The picture is more
stretched at the
edges.
The height is
expanded to fill the
whole screen.
4:3 14:9 16:9
The correct picture
width is maintained
but the top and
bottom are
cropped.
Zooms in slightly
cropping the top
and bottom.
4:3 14:9 16:9
The picture fills the
screen and is
proportionally
correct.
Zooms in slightly
cropping the top
and bottom.
The black bars top
and bottom remain
and the height is
compressed to fit
the picture area.
Letterbox Video
The black bars top
and bottom are
smaller and the
picture height is
compressed slightly.
Letterbox Video
4:3 14:9 16:9
The whole screen
is filled stetching
the width.
The whole screen
is filled stetching
the height slightly
at the edges.
4:3 14:9 16:9
The correct ratio is
maintained with
black bars on the
left and right.
Black bars left and
right, picture height
is stretched.
The whole screen
is filled with the
corrrect picture
ratio.
Black bars left and
right, picture height
is stretched.
Letterbox Video
The black bars top
and bottom are
present and the
height is
compressed.
Letterbox Video
Black bars left,
right, top and
bottom.
As zoom (14:9), but
bottom is
compressed even
more to allow
subtitles to be
seen.
As zoom (14:9), but
bottom is
compressed even
more to allow
subtitles to be
seen.
TITLES ON SCREEN
As zoom (14:9), but
bottom is
compressed even
more to allow
subtitles to be
seen.
TITLES ON SCREEN
As zoom (14:9), but
bottom is
compressed even
more to allow
subtitles to be
seen.
Page 9
9
Common specification
Power source AC 220~240V 50Hz
Television system System I
Colour system PAL/NTSC4.43
(PAL/NTSC4.43/NTSC3.58 in AV mode)
Channel coverage UHF: 21-69.
Aerial input impedance 75 ohm
AV terminal
AV1: CENELEC Standard
Input: Composite video, RGB and audio-L/R
Output: TV-output with composite video and
audio-L/R
AV2: CENELECStandard
Input: Composite video, RGB, S-VHS and
audio-L/R
Output: Monitor-output with composite video and
audio-L/R
Front AV terminal
AV3: RCAjacks
Input: Composite video and audio-L/R
Heaphone socket Mini Jack
CE28FWH4-B CE32FWH4-B
Sound output
(Continuous) 2 x 10W 2 x 10W
Picture tubes
(inches) 28 32
Dimensions
(WxHxD mm)
786 x 519 x 504 880 x 575 x 549
Weight (kg) 34.5 46.3
■ NO PICTURE, NO SOUND
● Check if TV is plugged in.
● Try a different channel, if OK, probably station trouble.
■ POOR PICTURE, SOUND OK
● Adjust BRIGHTNESS control.
● Adjust FINE TUNING control.
● Check aerial connections.
■ NO COLOUR, PICTURE OK
● Adjust COLOUR control.
● Adjust FINE TUNING control.
● Is the programme in colour ?
■ WEAK PICTURE
● Check aerial connections on back of set.
● Check aerial for broken wires.
● Re-orient aerial.
The following faults are not caused by the receiver:
"GHOSTS"
Reflections of signals from mountains or high buildings will cause
multiple images, called "Ghosts". These abnormal conditions can be
reduced to minimum by repositioning aerial or by installing new one
suited for your area.
"INTERFERENCE"
Interference may be caused by electrical appliances, car ignition
systems, etc. This should normally be a temporary condition, but
should this interference persist, contact your dealer.
INST
INST
ALLA
ALLA
TION / HELPFUL
TION / HELPFUL
HINTS / W
HINTS / W
ARRANTY
ARRANTYTT
O CUST
O CUST
OMER
OMER
Helpful hints
Sanyo U.K. Sales Ltd. (the company) warrants to the initial retail
purchaser that if this equipment is or becomes defective and that,
in the opinion of the Company, the defect is due to faulty material
or workmanship the Company will, for a period of 12 calendar
months from the date of sale to the original purchaser repair or
replace, at its sole option, free of charge, any such defective
component part of the equipment, always provided that:-
1: The equipment has at all times been used in accordance with
the operating instructions issued by the Company, and has not
been connected to an electrical mains supply for which it has
not been adjusted.
2: Accidental damage or damage caused by negligence of misuse
by the user, is specifically excluded.
3: Unauthorised repairs, or any modification to the equipment
which has not been expressly approved by the Company, shall
render this warranty null and void.
4: Failure due to fair wear and tear of any item is specifically
excluded.
This warranty is not transferable and is only applicable within the
United Kingdom (and the Republic of Ireland).
Nothing in this express warranty affects the statutory rights
available to the purchaser of this equipment.
Note: This warranty supersedes any other form of guarantee that
may inadvertently have been enclosed with or attached to the
product.
Dear Customer.
Thank you for buying
SANYO
. This equipment should give you
many years of pleasure and faithful service but in the event that a
fault occurs, the following notes for you guidance may be helpful:-
1: PLEASE RETAIN YOUR PURCHASE RECEIPT WHICH WILL
BE REQUIRED FOR SERVICE DURING WARRANTY.
2: If your Sanyo equipment proves faulty during the period of
guarantee, take it or send it back to the dealer who originally
supplied it together with this guarantee and the proof of
purchase. We have made arrangements with our approved
dealers under which they will carry out inguarantee service
repairs on our behalf. In this way, we hope to reduce to a
minimum the amount of time you will be without your equipment.
3: If for some reason it is impossible to return the equipment to the
original supplier, please contact our Service Department at the
address below for further advice.
4: Should the equipment require servicing after the expiry of the
guarantee period, take or send it to the original supplier or any
other Sanyo dealer. He will be pleased to give you a quotation
for the repair.
Service Department,
Sanyo UK Sales,
(A Division of SANYO Europe Ltd.),Sanyo House,
Otterspool Way,
Watford, Hertfordshire, WD2 8JX.
Tel: 01923 246363
Installation
Page 10
10
Page 11
11
Page 12
Part No. 1KA6P1P0040-- C6AB/BB
Printed in U.K.
Loading...