Sanyo CE32DFN2-B, CE28DFN2-B User Manual

CE28DFN2-B CE32DFN2-B

Please read this Instruction book before using your television.

We wish you many hours of pleasure from your new television.

Colour Television

INSTRUCTION MANUAL

END-USER LICENCE & SAFETY

PRECAUTIONS

Do not allow anything to rest on the power cord. Do not locate this

television receiver where the cord will be damaged by people walking on it.

Do not overload wall outlets and extension cords as this can result in fire or electric shock.

Slots and openings in the cabinet and in the back or bottom are provided for ventilation to ensure reliable operation and to protect it from overheating. These openings

must not be blocked or cov-

ered. The opening

should never be covered with a cloth or other

material, and the bottom openings

should not be blocked by placing the television receiver on a bed, sofa, rug, or other similar surface. This television receiver

should never be placed near or over

a radiator or heater. This television receiver

should not be placed in a built-in installa-

tion such as a bookcase unless proper ventilation is provided. Do not place your television receiver on an unstable stand, shelf or

table. Serious injury to an individual, and damage to the television may result if it should fall. Your sales person can recommend approved stands or shelf and wall mounting instructions.

If the television is built into a unit, or enclosed, the minimum distances for ventilation must be maintained. Heat build up can reduce the life of your television, and can be dangerous.

This television receiver should be operated only from the type of power source indicated on the television or as indicated in the Operating Instructions. If you are not sure of the type of power supply in your home, consult your sales person or your local power company.

Never add accessories that have not been specifically designed for this television.

Do not drop or push objects into the television cabinet slots or openings. Some internal parts carry hazardous voltages and contact may result in an electric shock hazard.

Never spill liquids of

any kind on the television receiver.

Do not place items such as

vases containing liquid on top of the TV set. Do not expose the television receiver to rain or use near water.

For example, near a bathtub, kitchen sink, in a wet basement, etc.

Before cleaning, unplug the television receiver from the wall socket.

Never stand on, lean on or push the television or its stand.

Never allow children to play with the television or its stand. Serious injury may result if it should fall.

Do not apply liquid cleaners or aerosol cleaners directly onto the television receiver. Use a damp cloth for cleaning.

Do not place candles or hot objects upon the TV, next to it or behind it. Open flames must never be used near the TV set.

Installation

Use

CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety.

But improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe the following basic rules for its installation, use and servicing.

The product (meaning the equiment or appliance to which this documentation relates) incorporates Software (the software applications, utilities and modules embedded within the Product) which is owned by Sanyo or its licensors. Before using the product, please read the End-User Licence Conditions detailed below. If you do not agree to the terms and conditions of the End-User Licence, Please do not proceed to use the Product- repack the Product unused and return it to your supplier together with proof of purchase for a full refund. By using the product, you agree to be bound by the terms and conditions of the End-User Licence.

Licence Grant, Conditions and restrictions

1. Sanyo grants you a non-exclusive, world-wide (subject to export

controls), non-transferable (except as permitted by 2 below), royalty-free licence to use the Software upon and with the Product.

2. You may not transfer any or your licence rights in the Software

without the prior written consent of SANYO and if consent is provided then the Software shall only be transferred in conjunction with the transfer of the Product AND provided that the transferee has read and agreed to accept the terms and conditions of this licence.

3. You must ensure that the copyright, trademark and other protective

notices contained in the Software are maintained and not altered or removed.

4. The Software provided hereunder is copyrighted and licenced (not

sold). SANYO especially does not transfer title or and ownership rights in the Software to you. The Software provided hereunder may contain or be derived from portions of materials provided to SANYO under licence by a third party supplier.

5. Except as expressly permitted by statute you may not;

● use the Software in conjunction with any other computer hard-

ware other than the product;

● copy all or part of the Software;

● incorporate all (or any of) the Software into other programs

developed by (or on behalf of) you and/or used by you;

● reverse-engineer, decompile or disassemble the Software;

● make the Software (or any part of it) available, or permit its

redistribution, for use with any computer hardware other than the Product; or rent, lease,gift,loan,sell,distribute or transfer posesssion of the whole or any part of the Software.

Termination

This licence is effective until terminated. This licence will terminate automatically without notice if you fail to comply with any of its provisions.

Disclaimer

1. The Software is(to the extent permitted by law) supplied ‘as is’ and

SANYO and its suppliers expressly exclude all warranties, express or implied, including (but not limited to) warranties of satisfactory quality, fitness for purpose and non-infringement (save to the extent that the same are not capable of exclusion at law).

2. In no circumstances will SANYO be liable for any direct, indirect,

consequential, or incidental damage (including loss of profits, business interruption, loss of data or the cost of procurement of substitute goods, technology or services) arising out of the use or the inablity to use the Software (save to the extent that such liability is not capable of exclusion at law).

General

1. This End-User Licence will be governed by laws of England and

the User may only bring claims in the English Courts and SANYO shall be entitled to bring a claim in the courts of any jurisdiction.

2. The above terms and conditions supersede any prior agreement,

oral or written, between you and SANYO relating to the Software.

End-User Licence

MINIMUM DISTANCES

10cm

20cm

10cm

5cm

Connect your aerial cable socket to the back of the TV set. Fit the aerial cable as shown below or as shown opposite when AV equipment is connected.

Connect the power cord of the TV set to a wall outlet.

✐ The TV set is prepared for a mains voltage AC220~240V, 50Hz.

When the TV set is not to be used for an extended period of time, it is advisable to disconnect the power cord from the power outlet.

✐ For all aerial problems please consult your local dealer.

● Connecting DVD / VCR player or Satellite receiver.

We recommend that you connect all other equipment before Plug and Play. The following examples are our recommended standard connection. For further information please consult your local dealer.

Please refer to individual Instruction Manuals for each piece of equipment for their connection suggestions.

Install two "AA" 1.5 volt batteries so that the "+" and "-" marks on the batteries match the "+" and "-" marks inside the unit into the remote control handset.

INST

ALLA

TION

Step : 1 Connections ( Essential)

WARNING! High voltages are used in the operation of

this set. Refer service to qualified service personnel.

Important:

This equipment is fitted with an approved non rewireable UK mains plug. To change a fuse in this type of plug proceed as follows:

1. Remove the fuse cover and fuse.

2. Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI

approved type.

3. Ensure that the fuse cover is correctly refitted. If the fuse cover is lost or damaged the plug must NOT be used but

replaced with a serviceable plug. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a rating of 5 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be destroyed to avoid a possible

shock hazard should it be inserted into a 13Amp socket elsewhere. The wires in this mains lead are coloured in accordance with the

following code:

Blue -------> Neutral Brown ----> Live

1. The Blue wire must be connected to the terminal which is marked

with the letter “N” or coloured BLACK.

2. The Brown wire must be connected to the terminal with the letter “L” or coloured RED.

3. Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires.

Please make sure that you have read the End-User section on page 2 before you activate Plug and Play.

Step : 2 Remote control battery installation

AV2

AV1

ANT.75Ω

AC Mains Outlet

TV rear panel

AV1

DISH IN

ANT.75‰

OUT

AV2

Option if no DVD

VCR

Satellite

VCR

For Satellite only

DVD

Press the Mains on off switch on the front of the TV set. The self-automatic tuning system called

Plug and Play will start. The TV scans the analogue channels first and then switches to digital channel mode and scans digital channels. This could take up to 15 minutes. During automatic tuning, the TV displays the tuning status of analogue and digital channel tuning on the screen.

Press OK to save.

Press OK to Watch TV.

Now the installation is complete!

After Plug & Play, Digital channels are stored in the programme positions shown in the All channel table. Analogue channels will be automatically sorted as follows:

Programme position 1 : BBC1 Programme position 2 : BBC2 Programme position 3 : ITV Programme position 4 : CH4 or S4C Programme position 5 : CH5 Programme position 6 : ITV2 Programme position 7 : channels in order found.

✐

If any other channels are available in your reception area, the remaining channels will be stored from programme position 7 in sequence as found.

✐

If you move to another city or cable is installed, please follow the description “TUNING”. (on page 13).

✐

This procedure only appears the first time you switch on.

Press 5 and 6 increases or decreases the programme position. Press 1 or 2 increases or decreases the sound volume.

Mains ON/OFF

Power indicator.

■ Front terminals

✐

To select the AV3 mode press the v button repeatedly.

✐

When the headphones are inserted the sound from the TV

speakers is muted.

3.5 mm Mini Headphone din AV3 Video in

AV3 Left Audio in

AV3 Right Audio in

Step : 3 Switching on / Plug & Play

Thank you for purchasing your SANYO TV. Now I am searching and storing all programmes. Please wait.

TV front controls / Terminals

INST

ALLA

TION

Analogue Set-up completed Next digital Set-up is starting

Scan for channels

Channels found

Done

Save

All channels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Watch TV

BBC ONE BBC TWO ITV 1 Channel 4 five ITV 2 BBC THREE Teletext BBC FOUR Sky Travel UK History Ch 14 CH 15 QVC TV Travel Shop

Scan for channels

Channels found

The scan will take approximately 3 minutes

RET

In progress

RET

Cancel

Stop

Headphone Jack

L/S

AV3 Video/ Audio-input Jacks

From Camcorder or video game equipment

Camcorder

Game equipment

R/D

REMOTE CONTROL

- Digital Use

Sound mute

To switch the sound from the speakers. The sound changes as follows;

Normal volume -> Half volume -> Mute

TV/AV switch

To switch from Digital TV, AV1, AV2 or AV3 mode press repeatedly.

Direct programme selector

For direct access to programmes using (0-9) numeric buttons for example for channel 23, press 2 and 3 numeric

buttons.

Volume up/down

To adjust the sound level.

To switch on the screen display menu on/off. See page 6.

Cursors

To select the sub menu items in the menu display, Up, Down, Left, Right.

Screen mode selector

To select the screen mode, AUTO, NATURAL, ZOOM14:9, TITLE IN 14:9, ZOOM 16:9, TITLE-IN 16:9, FULL or NORMAL.

Standby/Po wer on/off

To switch the TV on and off. Also see page 14.

Picture mode selector

To access a series of picture modes: PERSONAL, STANDARD, ECO and DYNAMIC.

System selector

To select the colour system in the AV mode , AUT O,PAL,NTSC 4.43 or NTSC3.58.

Coloured buttons

Some channels have interactive services. Use the red button to enter and other colours as directed. Also used in menu functions.

Programme up and down

To select the next programme number or previous programme number.

INFO

Shows the current and next programme on the selected channel. (ref er to page 11).

Guide

To call up the Digital TV schedule guide display on the screen. (ref er to page 11).

Surround mode selector

To select the surround mode, ACTIVE, MONO or OFF.

To save the setting in the menu, or to call up the All channel table.

Bass selection

To get an emphasised bass sound, ON or OFF.

D/A selector

To switch between analogue and digital channels.

Return

Returns back to previous screen in menu. Exits interactive mode.

Subtitle

Displays sub titles On and Off. You may need to switch to title in by pressing WIDE button. See page 17.

The main menu screen takes you to many functions in the TV. The buttons below are the main buttons and their uses.

MENU button - Enters and exits menus. Cursors

and ddmoves up and down

in each selected menu.

Cursor

changes levels, moves to the

left and returns to previous menu.

Cursor

changes levels, moves to the right and enters next menu.

RETURN button - Returns to the previous screen.

Refer to bar at bottom of screen for added help in which buttons to use.

1. Press the MENU button and select Picture using

but-

tons.

2. Press

to select.

Select using

ee , dd

buttons and adjust to obtain the best picture set-

tings for your environment using

77 , 88

buttons.

Tint : Colour phase if NTSC equipment is detected.

■ Storing personal picture preferences

If you have altered any of the settings in the Picture menu you can store them. You can be recall again later.

In the picture menu select memory by pressing the

button.

Press the 88button, a tick appears in the box and the settings are stored.

Press the MENU button repeatedly to exit the menu.

Press the MENU button and select Sound using

buttons,

press the 88button to enter.

Select and adjust to obtain the best sound settings for your environment using

ee , dd

and

77 , 88

buttons.

Press MENU to return to Main Menu. These settings automatically store when you exit the menu.

Press MENU repeatedly to exit menu.

You can set up different user lists to allow quick access to your favourite channels.

■ Setting User Lists

1. Press MENU button to select

main menu.

2. Select User Lists by pressing

button.

3. Select Your TV lists menu by

pressing

button.

4. Select a List eg. List 1 by pressing

button. Enter by pressing

button

5. Press

to add channels to your

list. Use

or ddto highlight channel selection. Press OK to add to your list, a X will appear next to the channel.

6. Repeat to add all the channels you want in your list.

7. Press Blue button to save selection.

8. Add more channels, move selection, rename list, remove or swap or press the OK button to finish the list or MENU to exit.

■ Move selection.

To change the order of channels in your list.

1. Select the channel you wish to move using the

or ddbuttons..

2. Press the Green button to select the channel.

3. Use

or ddto move to a different position

4. Press the Green button to save the new order.

Repeat steps 1-4 until all channels are in the order you need.

5. Add more channels, move selection, rename list, remove or swap or press the

OK button to finish the list or MENU to exit.

■ Rename List.

1. Press Blue button to rename your list. see picture.

2. Use

to move left or right.

3. Use

buttons to choose a letter, symbol or number. (A-Z,

0-9, -,+ etc.)

4. Press OK to save new user list name.

5. Add more channels, move selection, rename list, remove or swap

or press the

OK button to finish the list or MENU to exit.

DIGIT

OPERA

TION

Picture menu

Sound menu

User Lists

Main menu

Main Menu

Picture Sound User lists Parental lock Configuration Channel list Technical information Timer recording Off Timer TV settings

Brightness

Contrast Colour Sharpness memory?

Brightness Contrast Colour Sharpness

memory ?

memory

Rename list

Your TV lists

List 1

List 1 List 1 List 1 List 1 List 1 List 1 List 1

Free slot

Add channels

Move selection

Rename list

List 1 All channels

BBC ONE

Free

Select Save

BBC ONE

Free

List 1

1 2 3 4 5 6 7 8 9 10 11 12

R Y

BBC ONE X

BBC TWO

ITV 1

Channel 4

five

ITV 2

BBC THREE

Teletext

BBC FOUR

Sky Travel

UKHistory

Ch 14

CH 15

List 1

1 2 3 4 5 6 7 8 9

Put here

Remove Swap Save

BBC ONE BBC TWO ITV 1 Channel 4 five ITV 2 BBC THREE BBC FOUR UKHistory

Volume

Bass Treble Balance

RET

SaveChoose letter

Cancel

+ 14 hidden pages