Page 1
Dimension
WIRING DIAGRAM
400W
Electrical Illustration
37kg
6.0kg
Dry clothes
INSTRUCTION MANUAL
ASW-90WRT/P
FULLY AUTOMATIC WASHING MACHINE
Blue Purple
Brown
1. Power source wire 2. Fuse 3. 4. Pump
5.
Incoming cold & warm water valve 6. Motor
Assembly of electric capacitor and inductance
7.
Water level sensor 9. Safety switch 10. Electronic program controller
8.
Red Red
Light Blue
Yellow / Green
Orange
Red
White Yellow
Orange
White
Light Blue
Light Blue
Light Blue
Blue
Yellow
Light Blue
Blue
Yellow
Light Blue
Light Blue
Retractor
Blue
White
Blue
Brown
Green
Green
Page 2
INDEX
Names of parts --------------------------------------------------------------------------------------2
Simple installation and operation----------------------------------------------------------------3
Installation of water inlet hose -----------------------------------------------------------3
Installation of drain hose --------------------------------------------------3
Location of washer --------------------------------------------------------------------------4
Power source and grounding ---------------------------------------------------------------5
Installation of splash-free cover & base cover -------------------------5
Functions of buttons ----------------------------------------------------------------------6
Programs ------------------------------------------------------------------------------------8
Fully automatic programs -------------------------------------------------------------------8
Additional explanation ------------------------------------------------------------------------8
Delay time program ------------------------------------------------------------------------10
Wash of blanket ---------------------------------------------------------------------10
Use the cleaning solution for twice ----------------------------------------------10
Load size and detergent -------------------------------------------------------------------11
Weight standard of the clothes -----------------------------------------------------------11
Maintenance----------------------------------------------------------------------12
Troubleshooting ------------------------------------------------------------------------------------13
Other functions ---------- --------------------------------------------------------------------------14
Important safeguards-----------------------------------------------------------------------------15
Specifications ---------------------------------------------------------------------------Back cover
1
Page 3
NAMES OF PARTS
1
2
3
4
11
10
SIMPLE INSTALLATION AND OPERATION
Installation of WATER INLET HOSE
1. Check the tap . Connect the CONNECTOR of WATER INLET HOSE with the tap.
2. Push the CONNECTOR of the WATER INLET HOSE upwards, and screw it into the tap tightly.
3
. Grasp the WATER INLET HOSE by hand and pull it downwards to see whether it is securely connected.
4. Connect the other end of the WATER INLET HOSE with the WATER INLET of the washing machine.
Notices:
Water tap may vary by country.
The appliance is to be connected to the water mains using new hose-sets and that old hose-sets not be
reused.
5
9
8
6
7
1. TOP LID 2. WASH/SPIN TUB 3.TOP FRAME 4. BLEACH ENTRANCE
5.LINT FILTER 6. BASE 7. ADJUSTING FOOT 8. CONTROL PANEL
9. DRAIN HOSE 10.PULSATOR 11.HANDLE
Accessories
WATER INLET HOSE
ASSEMBLY(2)
BASE COVER (1)
SELF-TAPPING SCREW (1)
Tap
CONNECTOR
Notices:
After finishing to install the inlet hose, do not immediately switch on the power. Open the tap go over
the both ends with contact whether occur to seep. If the inlet hose is difficult to install for the tap etc. ,
you can invite the experienced person to help.
The method of installation for the double water inlet hose is the same.
The end of the hot water inlet hose is red color.
Installation of the drain hose
Non-pump model
Pinch the FIXING RING by hand to make it loose and
engaged on the DRAIN HOSE and put the DRAIN HOSE
into the LEADING SKIRT of DRAIN HOSE in the bottom
of the washing machine to the end at the most (soak the
DRAIN HOSE in warm water will make the engagement
easy), and loosen the FIXING RING to let it clasp the
DRAIN HOSE.
INNER HOSE
LEADING RING
CABINET
FIXING RING
DRAIN HOSE
2
3
Page 4
Pump model
DRAIN HOSE must be placed at least 86cm (30inches) from the bottom of washer but not higher than 120cm.
Power source
If the supply cord is damaged,it must be replaced by the manufacturer,its service agent or similarly qualified person in
order to avoid a hazard.
Notice: Drain hose blocke can lead to drain fault.
Step 1:
The washing machine should be placed inside a room with a flat floor, which is convenient for water supply
and drain, has low moisture and no direct sunshine, and does not freeze in winter.
Step 2:
All foam packing should be taken off, otherwise the washing machine will not work.
Horizontalize the washing machine according to the instructions below to make the washing machine run
Step 3:
steadily in low noise.
1.Loosen the FIXING POLE on the ADJUSTING FOOT, screw in or screw out the ADJUSTING FOOT to
make the four braces placed even on the floor. (the ADJUSTING FOOT is on the left front bottom of the
CABINET).
2.Check whether the washing machine is on a level surface using a plump line as shown in the below
Fugure.The washing machine is on level groud floor if the frame line is parallel with the plump line.( A=A',
B=B').
3.After the adjustment the FIXING POLE should be screwed back and tightened.
Notices:
If the washing machine is not placed flat (the inclination angle is over 2 ), it may cause excessive vibration,
o
automatic check and rectification or other abnormal circumstances will often take place in the course of
spinning.
Remove all foam packing including the FIXING FRAME on the BASE FOAM in the step 2.
BASE FOAM
FIXING FRAME
CAUTION!
If this appliance is supplied from a cord extention set or electrical portable outlet device,the cord extention set or
electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.
Installation of the base cover
1. Slant the washing machine with angle of 45 in the direction of
the arrows showed in the figure. Slid the BASE COVER between
the SLOTS from the back side of the washing machine.
2. Put the BASE COVER straight to the point and then press it
upward till you hear it adjust, and screw it.
o
Slot
Base cover
Hole for Self-tapping screw
CAUTION!
Carpet dose not obstruct the openings for washing machine with ventilation
openings in the base.
Simple operation
1. Put detergent into WASH/SPIN TUB.
2. Put the POWER PLUG into the socket, switch on th power.
3. Open the tap.
4. Press "Power" button.
5. Press "Start/Pause" button. The washing machine will go into operation by the automatic program of standard.
"PROGRAMS".Remark: If you want to set other programs, please see and read
Loosen
FIXING POLE
Tighten
ADJUSTING FOOT
Screw in
Screw out
Plump
4 5
Page 5
FUNCTIONS OF BUTTONS
Selection of water level
To set water level according to the
quantity of clothes. Each press, the
water level indicator light moves in
turn.
TEMPERATURE
Press the button to set the wash temperature inlet
HOT or COLD water for wash. When the lights of
HOT and COLD are light at the same time, the
HOT water and COLD water are injecting.
Press the button you can select HOT, COLD and
WARM water to be used.
Child Lock & Tub Clean
Please read "Additional explanation".
FUNCTION
Press the button to set the single "SOAK" , "WASH" ,
"RINSE" or "SPIN" function.
Program setting
Press the button to select the "Normal"(light)/"Heavy" (flashing),
"Quick"(light)/"Wool" (flashing), "Delicate"(light)/ "Anti-
wrinkle"(flashing) program. Each press, the indicator lights move in
turn to select program. The total time for the program will be shown
in indicator.
There is no further notice for slight change of the above picture.
Delay
Press the button to set up delay
time of washing. Each press the
button accompanys a change of
an hour in indicator.
In order to protect controller, the interval of power on and off
should be more than 30 seconds.
Start / Pause
After program selection, press the button
to start. The flashing light indicates the
selected programs and the current state.
Press the button again for pause. The
program continues at another press till
the program is finished.
Power switch
The power socket is plugged in, press the button,
the washer enters to working state and
automatically set up for standard program.
In the course of working, press the button to end
current program, the washer will stopping.
6
7
Page 6
WAY OF USE
Fully automatic programs
Program
Normal
program
Quick
program
Wool
program
Anti-wrinkle
program
Heavy
program
Delicate
program
Features and usage
Powerful in cleaness result and widely applicable.
Commonly-used in spring, autumn and winter.
7
The wash time is comparatively short, fit for the lightstained clothes. Often used in summer.
The washing ability is not so strong as normal washing
program , fit for slight or expensive clothes
The wash time is short, rinses many times with high water
level, thoroughly wash away the garment.
Powerful washing, fit for heavily stained clothes such as
work clothes, jeans. It is also applicable for washing blanket,
wool towel, slipcover.
Being normal program of water flow and dynamic soak,
applicable for lower water temp. in winter or the dirtier
clothes.
Wash time
12 minutes
2 minutes
15 minutes
8 minutes
15 minutes
10 minutes
Rinse times
Twice
Rinse once
+ Spray
Twice
Twice
Twice
Twice
Spin time
6 minutes
1 minute
Only drain
Only drain
7 minutes
2 minutes
Total time
About 41 minutes
8
About 10 minutes
About 34 minutes
About 27 minutes
About 47 minutes
About 33 minutes
Remark: 1. Do not include quick program. The upper time table have assumed water inlet time (2 minutes / times) and drain time (1 minutes / times).
2. Before selecting hot water for wash, you should read the label of clothes.
Additional explanation
1. "TUB CLEAN" function: Press the "PROGRAM" and "DELAY" button at the same time. After selecting the "TUB CLEAN" program, only "SPIN" lights is on. Then press the "START/PAUSE" button, the washer begins to
spray and spin a minute, and again spin a minute.
2. "CHILD LOCK" function: After start, press the "FUNCTION" and "WATER LEVEL" buttons at the same time, then all buttons will be locked (include the "POWER" button), the indication displays "CL" a second every 5 seconds.
Press the "FUNCTION " and "WATER LEVEL " buttons at the same time to unlock the function.
3. In the course SOAK ,the washer does not stop completely, it will wash intermittently to let the washing evenly mix with the detergent.
4. If you have selected the "NORMAL " program, the washer can detect texture of clothes to change intensity of wash and according to the temperature of water adjust the time of wash.
8 9
Page 7
Delay time program
Delay time means the beginning time of washing.
1. Switch on "Power" button.
2. Open the tap and hang the DRAIN HOSE up.
Method of use of "delay" button
Each press of the button, the delay
time adds one hour.
Remaining time
3. Load laundry and put detergent.
4. Select the proper water level according to the
quantity of clothes.
5. Select the functions and programs.
6. Press "Delay" button to select the beginning time of
washing.
7. Press "Start/Pause" button and close the LID.
Delay (hour)
(Minutes)
Delay
Confirmation of the delay and inspection
After the delay function is started, the corresponding light will be turned on, and other lights are turned off.
After the delay function is started, press "Delay" button continuously, you may inspect the program and
function set. Release the button, the program will automatically come back to preset status.
Cancel the delay time, or alternate the delay time
Before the program is started , the delay indicator lights, and the delay time is selected from 1 to 24 hours.
If the delay time is set over 24 hours, the delay indicator is turned off , and the function will be cancelled.
Press power switch to end program, and to cancel delay function at the same time.
To change the delay time, press "Start/Pause", and then press "Delay" button to reset.
Notice:
The degree of incoming water pressure may affect the ending time of washing.
Blanket wash
The weight of the blanket should be less than 4kg, and select the "Heavy" program to wash. It is suggested to use a
mesh bag for the bulky washing and the method below:
1. After the detergent is dissolved with the proper amount of warm water (below 50 ), pour it into the WASH/SPIN
TUB.
2. Fold up the blanket as the method showen in the figures below and put it into the WASH/SPIN TUB.
3. Switch on the power and press the "Program" button to select the "Heavy" program and select the higher water
level.
4. Press the "Start/Pause" button, and close the lid.
5. At the end of washing, hang to dry in well ventilated place with sunshine,and straighten out.
Notices:
Only blankets with marks "Hand wash" can be washed.
Load size and detergent
Water
level
8
7
6
5
4
3
2
1
Notices:
The recommended detergent is low and mid foam detergent.
The volume of detergent changes with different type of clothes. Read directions on packaging of detergent.
Water volume is different depending on clothes types. If the washing machine runs below normal
adjust clothes volume and water level.
The water volume in the above list is based on normal clothes volumes.
A suit of work clothes
(blended) about 800g
Short sleeve shirt
(cotton) about 130g
Water
volume
About 53L
About 48L
About 43L
About 38L
About 34L
About 30L
About 25L
About 17L
Weight standard of the clothes
A pair of pajamas
(cotton) about 500g
Bath towel (cotton)
about 300g
Weight of
washing
5.5 6.0kg
5.0 5.5kg
4.5 5.0kg
4.0 4.5kg
3.5 4.0kg
3.0 3.5kg
2.5 3.0kg
<2.5kg
Long sleeve shirt
(blended) about 200g
Short pants (cotton)
about 50g
Washing powder
About 87g
About 82g
About 72g
About 67g
About 55g
About 47g
About 36g
About 30g
Bedsheet (cotton)
about 500g
Socks (blended)
about 50g
Fold in two by the long side
Fold three times in the
same direction
Roll up the blanket.
10
Put it into the wash tub with
the edge downwards
11
Page 8
METHOD OF MAINTENANCE
TROUBLE SHOOTING
The following cases are not faults
1.There is water inlet during washing or rinse, which is due to the washer senseing a lack of water and
changes water level automatically.
2.There is the phenomenon of intermittent spinning in the beginning of spinning, which is performed to achieve better spinning
effects.
3. In the course of spin, the program returns to the wash program. This is designed to rectify unbalanced distribution of load in
the WASH/SPIN TUB.
Maintenance
After the whole washing program
The washing machine will make buzzer sound after
end of any program operation to remind you to
taking out the laundry or operate it again.
After finishes washing, shut off the tap, and pull out
the plug in case of water leakage or fire accident.
Cleaning the water inlet
After prolonged use, the WATER INLET MESH may be
blocked, and should be cleaned according to the
following steps:
1. Switch on the power, followed by shutting off the tap .
2. Let the washer work for 5 seconds so that water flows
into the tub through the water inlet hose. Then turn off
the power.
3.Disconnect the water inlet hose and clean the mesh
Bag. Then restore the water inlet assembly.
Use a soft cloth to wipe off the
water and dirt on the surface each
time after use of the washing
machine. Detergent, propellant
and other chemicals are not
allowed to use, for they can cause
damage to the surface.
After using the washing machine for a period, clean it
according to the following steps:
1. Take out the lint filter.
2. Turn the mesh bag inside out and wash it clean in the water.
3. Restore it and refix it.
Maintenance of shell
Cleaning of the LINT FILTER
Exceptional
phenomenon
No indication
in controller
The inlet hose
leakage
Does not drain
Dose not inject water
Spinning stops and
water injecting begains
in the course of spin
Does not spin
Intermittent spinning
Cause
The power plug is not plugged tight.
The power switch is not switched on.
Not press
"START/PAUSE" button.
Power cut.
The INLET HOSE is not firmly
connected with tap.
WATER INLET HOSE is not screwed
tight.
The DRAIN HOSE is caught or
jammed.
Off water.
Not on tap.
Whether the wire netting in the WATER
INLET was blocked.
Cause by that the washing placed
uneven.
After draining, the lid is not correctly.
Open the lid during spinning.
The maintain a better spinning
effect.
Solution
Re-plug the power plug.
Check the power socket, or change other socket.
Press
"START/PAUSE" button.
Wait for switching on electricity.
Check the connection.
Screw tight the nut.
The drain hose is made swimmingly, and
solve the problem of jam.
Wait for supply water.
Open the tap.
Clean the msh according to the method of
"Cleaning of the water inlet".
This is automatic rectification for spinning in
the washing program. That the washing are too
much or too little, or that the washing machine
is not placed plane will cause the unbalance in
time of spinning. If there is still abnormal
circumstances after checking the abovementioned points, please pull out the power
plug and contact with local service as soon as
possible.
The LID is not closed correctly.
This is normal .
Before using the machine
water exists
in the drain hose.
Notices:
If there is still abnormal circumstances after checking the above-mentioned points, please pull out the plug.
Do not repair it by yourself at home, which is very dangerous.
12
Remainning water due to testing or
experiment in the factory.
13
This is normal .
Page 9
OTHER FUNCTIONS
Function of fault alarm
Fault
Alarm for
water inlet
Alarm for
opening lid
Cause of fault
Entering water less than 16
minutes, reset water level.
Open the LID after starting
the delay time. Open the LID
when the washer is spinning.
Indication
E1
E2
Alarm of the
buzzing sound
The buzzer goes
on buzzing for
10 seconds. If
the fault is not
solved , buzzes
again for 10
seconds in every
16 minutes.
Stopping alarm
Open the lid to
deal with faults,
then close the lid
to stop the alarm.
WASH/SPIN TUB
WASH/SPIN
WASH/SPIN TUB
LID
WASH/SPIN TUB
WASHER
POWER CORD
POWER PLUG
POWER PLUG
POWER CORD
POWER CORD
Imbalance alarm
Drain alarm
Checked imbalance for the
third time.
After draining for 4 minutes,
does not finish to drain.
E3
E4
Automatic power shut off
1. If the machine is not started within 10 minutes after powered on, it will power off automatically
2. If the machine is not powered off until the buzzer sounds 6 times after the operation, it will power off
automatically
Adjusting for unbalance
1.If the laundry is placed uneven before spinning, it causes excessive vibration of spinning. The washing
machine has a function of adjusting unbalance. During cycles, the washing machine always inspects running
state. If the spinning vibration is too big, the washing machine automatically starts the adjusting program to
balance.
2. If the washing machine detects the unbalance even after the adjustment, it will alarm.
WASH/SPIN TUB
CONTROL PANEL.
WASH/SPIN TUB
WASH/SPIN TUB
1.the appliance is not intended for use by young children or infirm persons without supervision.
2.Young children should be supervised to ensure that they do not play with the appliance.
14
15
Loading...