SANYO ALP210 Datasheet

SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.

LCD Module

Low-Temperature Polysilicon

2.0-inch TFT LCD Module

Ordering number:EN6163

ALP210

Overview

This 2.0-inch LCD module is a full-color active matrix
module that uses low-temperature polysilicon thin-film
transistors and includes built-in driver circuits for thin­frame mounting. The high-resolution and RGB delta dot
arrangement is optimal for use in digital video cameras

and digital still cameras.

Features and Functions

• Display size (diagonal) : 5.1cm (2.0 inches).

• Number of dots : 130,338 dots (557×234 dots).

• RGB delta arrangement.

• Operating ambient temperature : –10 to +60°C.

• Storage ambient temperature : –20 to +70°C.

• Compact design achieved with narrow frames and thin
form factors.

• Support for scan reversal both horizontally and verti­cally.

• Level shifter circuit built in.

• Support for NTSC/PAL format by using the recom­mended IC (LV4126W).

• Anti-reflection (AR) coat.

Specifications

retemaraPnoitacificepStinU

lanogaidaeragniweivevitceffE)sehcni-0.2(1.5mc

latnoziroh( × )lacitrev

stodforebmuN

latnoziroh( × )lacitrev

hctiptoD

latnoziroh( × )lacitrev

tnemegnarraroloCatledBGR–

latnoziroh( × lacitrev × ssenkciht)

thgieW–g

htgnelCPF6.13mm

Note 1. Excluding the FPC and mounting sections.

snoisnemidaeragniweivevitceffE

snoisnemidlanretxE

Package Dimensions

unit:mm

89.04 × 77.03mm

755 × 432tod

5370.0 × 5131.0mm

9.74yllanoisivorP × 9.93 × 8.2

)lacipyt(

1etoN

mm

[ALP210]

47.9

40.98

30.77

39.9
(20.65)19.15

2

31.6

FPC

22

30199RM (KT) No.6163–1/2

2.8(max3.1)

System Structure

ALP210

Video signal

• Composite

• Y/C
Y/color difference

•

Serial control

Xtal

Video chroma

signal

processing

BUS I/F

SYNC

SEP.

Signal processing IC

LV4126W

R
G
B

RGB

driver

(S&H)

Timing controller

VCO

R
G
B

PCD

Low-temperature polysilicon TFT LCD

H driver

Display area

V driver

Level

shifter

Precharge circuit

ALP210

Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.

This catalog provides information as of March, 1999. Specifications and information herein are subject to
change without notice.

PS No.6163–2/2