Sanus Systems NF213, NFV49, NF203 User Manual 2

Assembly Instructions for Natural Furniture, Models: NF203, NF213, NFV49

Thank you for choosing the Natural Furniture line from Sanus Systems. If you have any questions regarding this or any
other Sanus Systems product, please contact us at 800.359.5520 or visit us at www.sanus.com. Our customer service
representatives can assist you quickly with any issues regarding assembly or missing parts. Check carefully to make sure
none of the parts are missing or defective. Never use defective parts. Replacement parts for products purchased from an
authorized dealer will be shipped directly to you. Please call Sanus Systems before returning products to retail stores.

Supplied Parts List: (Threaded fasteners are shown full size)

Front Frame - A

Qty. 1

Glass Shelf - D

Qty. 2

Steel Cross Tube- B

Qty. 12

Rear Support - E

Qty. 2

Three Hole Plate - C

Qty. 8

Plastic Wire Cover - F

Qty. 2

Wire Strap - H

Qty. 4

Top Glass Shelf - G

Qty. 1

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 04.06.06 (100043)

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Allen Bolt - I

Qty. 12

Washer - J

Qty. 4

Decorative Face Bolt - K

Qty. 12

Step 1: Attach the Cross Tubes to the Front Frame

Position the Front Frame (A) as shown in Diagram 1; then, thread each Decorative Face Bolt (K) through the Front Frame,
a Three Hole Plate (C) and into a Steel Cross Tube (B).

Repeat this process until all twelve Steel Cross Tubes (B) are fastened to the Front Frame (A) as shown in Diagram 1.

Firmly hand tighten each Steel Cross Tube (B).

Glass Protector - L

Qty. 8

Diagram 1

A

Allen Key - M

Qty. 1

C

B

K