Page 1
3
Attach TV to Wall Plate
Unlock the Wall Plate
3-1
Press the button on wall plate
to release the safety latch.
15
15
Lock the Wall Plate
3-3
Press down on the safety latch until the
button pops up AND you hear a "click".
CAUTION: Avoid potential personal
injury or property damage! The safety
latch must be locked, so the TV is
securely fastened to the wall plate 15.
15
Hang Your TV
3-2
HEAVY! Use assistance with this step.
Use two people to hang the TV, to visually ensure TV bracket
hung correctly onto wall plate 15 (see side view).
IMPORTANT: DO NOT lower TV straight down onto wall
plate 15 -- this will engage the lock. Safety latch must be released
for proper installation (See STEP 3-1).
01
01 15
Side View
No Tilt Feature (OPTIONAL
3-4
Place magnetic
A B
leveling feet 19 in
the lower corners of
the TV.
For non-metal back
TVs, use adhesivebacked disc
)
.
20
01
is
15
14
01
15
Side View
If you used spacers
14
in STEP 1-2,
stack both magnetic
leveling feet 19
together and place in
the lower center of
the TV.
For non-metal back
TVs, use adhesivebacked disc
20
VML
41
Instruction Manual
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520 We’re ready to help!
Thank you for choosing Sanus! Please take a moment to let us know how we did:
Find us on Facebook: SANUS Follow us on Twitter @sanussystems
Milestone AV Technologies and its a liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the
information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information
contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein.
Milestone assumes no responsibility for accuracy, completeness or su ciency of the information contained in this document.
©2015 Milestone AV Technologies. All rights reserved. Sanus is a division of Milestone.
All other brand names or marks are used for identifi cation purposes and are trademarks of their respective owners.
SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA
IMPORTANT SAFETY INSTRUCTIONS
.
Before getting started, let’s make sure this mount is perfect for you!
– SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
6901-002447 00
Button
Adjustments
Lateral Shift
Slide the TV side to side.
Make sure your TV is
locked to wall plate
(STEP 3-3).
15
Dimensions
450.9
17.75
Side View Side View
15
( in. [mm] )
16.00
15.91
404.0
2.95
Level
Remove the TV.
Loosen both screws 18,
adjust level, then retighten
the screws (STEP 2-3).
406.4
75.0
20
18
0.20
5.1
0.34
8.8
19
Remove the TV
Disconnect your cables.
Unlock wall plate
(STEP 3-1).
Lift the TV up and away.
0.98
25.0
2.77
70.3
1.12
28.6
1.10
27.9
15
1.5°
1.5°
LEVELING
LATERAL SHIFT
20
3.40
86.4
19
15
5°
OPTIONAL
TILT
1
2
3
4
Does your TV weigh
more than 80 lbs.
(36 kg) including
accessories?
What is your
wall made of?
CAUTION:
DO NOT install
into drywall alone
Do you have all of
the tools needed?
Ready to begin?
80 lbs.
(36 kg)
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service at 1-800-359-5520.
CAUTION: Avoid potential personal injuries and property damage!
● This product includes directions and hardware for use with wood studs – DO NOT install into drywall alone.
● The wall must be capable of supporting fi ve times the weight of the TV and mount combined.
● Do not use this product for any purpose not explicitly specifi ed by manufacturer.
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
No — Perfect!
Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call
1-800-359-5520 to fi nd a compatible mount.
Drywall with
wood studs?
Perfect!
Call Customer Service: 1-800-359-5520
ScrewdriverTape MeasureStud Finder Awl Pencil
Electric Drill Square Driver Bit
Solid concrete or
concrete block?
Concrete kit (#CMK3)
required
INCLUDED
Wood Stud
Applications
1/8 in. (3.2 mm)
Wood
Drill Bit Drill Bit
Unsure?
Concrete
Applications
5/16 in. (8 mm)
Concrete
Page 2
Parts and Hardware
WARNING: This product contains small items that could be a
choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do
not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1
TV Bracket
1
Attach TV Bracket to TV
Select Your TV Screws
1-1
M4
M5
M6
M8
Attach the TV Bracket
1-2
Center TV bracket 01 on your TV's hole pattern and securely attach using hardware confi guration A or
A B
• Flat Back TV [AND TV closer to the wall]
• Rounded Back TV
• Extra Space Needed [for cables or inset holes]
B
, depending on your TV needs.
01
x1
08
x2
09
09
x2
05
06
x2
07
x2
04
x2
x2
TV Screws
M4 x 12mm
M5 x 12mm
M6 x 12mm
M6 x 20mm
M8 x 16mm
M8 x 20mm
02
x2
12
13
x2
11
x2
x2
10
x2
M4/M5
TV Screws
M4 x 35mm
M5 x 35mm
M6 x 35mm
M8 x 35mm
Spacers
Washers
03
x2
14
x2
M6/M8
CAUTION: Verify thread engagment of the
screw or spacer/screw combination in STEP 1-2.
— Too short will not hold the TV
— Too long will damage the TV
Correct Correct
Too
Short
Attach Wall Plate to Wall
2
2-1A
Verify Your Wall
Min. 3 1/2 in. (89 mm)
Min. 1 1/2 in. (38 mm)
Too
Long
2-2A
1
01
A
Find the Stud Centers
2 3
04 05 06 07 08 09
02 03
2-3A
1
Attach the Wall Plate
2
14
01
Cables
Inset
Holes
3
B
10 11 12 13
14 02 03
15
Parts and Hardware for STEP 2
Wall Plate
15
x1
Washers
17
x2
Concrete Anchor Kit CMK3 (NOT INCLUDED)
For concrete installations:
*
Contact customer service at
1-800-359-5520 to have these
anchors shipped directly to you.
Parts for STEP 3 (OPTIONAL)
Stando
(Magnetic Leveling Feet)
**
medical device such as a pacemaker or implantable cardioverter defi brillator
(ICD) is in use, magnetic fi elds may a ect the operation of those devices,
resulting in serious injury or death. If you have an implanted medical device,
keep at least 13 cm (5 in.) between your device and the magnet. Please consult
with your physician or medical professional prior to using this product.
**
19
x2
WARNING: This product contains a magnet. If an implanted
Wood Screws (Wall Plate Screws)
18
x2
#10 x 2 1/2 in.
*
16
x1
C
1
x2
Fischer
(Adhesive backed)
Driver Bit
UX8x50R Anchor
Disc
20
x2
(Square)
Max.
5/8 in.
(16 mm)
CAUTION: Avoid potential personal injuries and
property damage!
● Drywall covering the wall must not exceed 5/8 in. (16 mm).
● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm)
nominal 1½ x 3½ in. (38 x 89 mm).
● Minimum horizontal space between fasteners: 16 in. (406 mm).
● Stud centers must be verified – not all walls have
conventional 16 in. (406 mm).
WOOD STUD OPTION 2A
2-1B
CAUTION: Avoid potential personal injuries and
property damage!
● Minimum solid concrete thickness: 8 in. (203 mm).
● Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm).
● Minimum horizontal space between fasteners: 16 in. (406 mm).
CONCRETE OPTION 2B
● Mount wall plate
Verify Your Wall
Min. 8 in.
(203 mm)
15
Min. 16 in.
(406 mm)
Min. 16 in.
(406 mm)
directly onto the concrete surface.
Min.
8 in.
(203 mm)
Locate the
studs using a
stud fi nder.
2-2B
Attach the Wall Plate
Probe the wall
with an awl or
drill bit to verify
the stud edges.
1
15
Min. 16 in.
(406 mm)
Position wall plate 15 at your
desired height. Level, then
mark the two hole locations.
15
Drill two pilot holes using a
1/8 in. (3.2 mm) drill bit.
IMPORTANT: Pilot holes
must be drilled to a depth of
2.5 in. (63 mm).
Mark the
center of
both studs.
Min. 16 in.
(406 mm)
15
Position wall plate
desired height. Level, then
mark the two hole locations.
at your
2 3 4
C
1
*
Drill two pilot holes using a 5/16 in.
(8 mm) masonry drill bit.
IMPORTANT: Pilot holes must be
drilled to a depth of 2.75 in. (70 mm).
Never drill into the mortar between blocks.
Insert two anchors
included in Concrete Anchor Kit CMK3*).
CAUTION: Be sure the anchors are
seated flush with the concrete surface.
C
(Fischer UX8x50R
1
17
16
Install wall plate
screws
Adjust leveling, if needed, then securely tighten
both screws
18
15
with two washers
, using bit 16.
.
18
18
17
and
CAUTION: Improper use could reduce the holding
power of screws 18. DO NOT over-tighten the screws.
15
17
16
15
Install wall plate
screws
Securely tighten both screws 18.
18
, using bit 16.
with two washers
18
17
and
CAUTION: Improper use could reduce the holding
power of screws 18. DO NOT over-tighten the screws.
Loading...