Sansui SA-N3011 Owners Manual

P/N:97P95600D0-9J

Contents

Product information

Product Information

Important Safeguards .....................................................2

Advantages of This Product .... .................................... 5

Read Carefully before Using .........................................6

Identification of Controls ............................................... 7

Remote Control .............................................................. 11

Installation

Connecting your player with a RF lead ..................... 12

Connecting with Other VCR or Camcorder ............. 14

Connecting with Audio .................................................16

Connecting to a television with Component jack and a

Dolby Digital Amp. ....................................................... 17

Basic Operation

Initial Installation ........................................................... 18

Setting time and date, OSD ON & OFF ..................... 20

Output Select .................................................................. 21

DVD Playback ................................................................ 22

VCR Playback ................................................................ 23

Recording ........................................................................ 24

VCR Operation

Tuning in New Stations ................................................ 27

Timer Recording ............................................................ 30

More Functions ..............................................................32

Connections and Copying ........................................... 35

DVD Operation

Playing a desired scene ................................................ 37

Confirming the current PLAY mode on screen ....... 41

Selecting an AUDIO language, SUBTITLE language

and 3D AUDIO ............................................................... 43

Selecting ZOOM and Multi Angle.............................. 44

About MP3 ,CDDA, JPG and MPG discs .................. 45

Displaying menus in a disc, Progressive Scan Mode

...49

Set-up

Language Setup .............................................................. 50

Video Setup ......................................................................52

Audio Setup..................................................................... 53

Others Setup Features ................................................... 54

Other Features

About DVD...................................................................... 56

Basic information about VCR and Videotape.......... 58

Trouble Shooting (VCR)................................................ 59

Trouble Shooting (DVD) .............................................. 61

Specifications .................................................................. 62

Important Safeguards

Product information

CAUTION

RISK OF ELECTRIC SHOCK

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

IMPORTANT FOR LASER PRODUCTS

• LASER :

• DANGER :

• CAUTION : Do not open the top cover. There are no user

CAUTION: Any changes or modification in construction of this device which are not expressly approved by

• Make sure the unit should be placed at least 8cm apart from the other home appliances or the obstacles to get sufficient ventilation.

• This unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on this unit.

• Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the mains, you have to unplug it.

• The system is not completely disconnected from the mains when the / I button is set to the position.

DO NOT OPEN

APPLIANCE TO RAIN OR MOISTURE. DO NOT PLACE ANY OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES ON THE UNIT.

FULLY INSERT.

This Digital Video Disc Player employs a Laser System. To ensure proper use of this product please read this instruction manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location - see service procedure. Use of control adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser radiation when open and interlocks defeated. DO NOT STARE INTO THE BEAM.

Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

serviceable parts inside the Unit; leave all servicing to qualified service personnel.

the party responsible for compliance could void the user’s authority to operate the equipment.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT

This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.

1 READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2 RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3 HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4 FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5 CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6 ATTACHMENTS

Do not use attachments unless recommended by the unit’s manufacturer as they may cause hazards.

7 WATER AND MOISTURE

Do not use this unit near water- for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.

8 ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child or adult as well as serious damage to the unit. Use this unit only with a cart, stand , tripod, bracket, or table recommended by the manufacturer.

A unit and cart combination should be moved

PORTABLE CART WARNING

(symbol provided by RETAC)

with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

9 VENTILATION

Slots and openings in the case are provided for ventilation to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. These openings must not be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat radiator. This unit should not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10 POWER SOURCES

This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

11 POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.

12 LIGHTNING

For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

13 DISC TRAY

Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury.

2 3

Important Safeguards

Product information

Advantages of This Product .....

14 OVERLOADING

Do not overload wall outlets of extension cords as this can result in a risk of fire or electric shock.

15 OBJECT AND LIQUID ENTRY

Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or “short-out” parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

16 BURDEN

Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and serious damage to the product.

17 DISC

Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.

18 SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19 DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power-supply cord or plug is

damaged.

B. If liquid has been spilled, or objects have fallen

into the unit. C. If the unit has been exposed to rain or water. D. If the unit does not operate normally by

following the operating instructions. Adjust

only those controls that are covered by the

operating instructions. Improper adjustment of

other controls may result in damage and will

often require extensive work by a qualified

technician to restore the unit to its normal

operation. E. If the unit has been dropped or the cabinet has

been damaged.

F. When the unit exhibits a distinct change in

performance-this indicates a need for service.

20 REPLACEMENT PARTS

When replacement parts are required, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the unit manufacturer can prevent fire, electric shock, or other hazards.

21 SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks recommended by the manufacturer to determine that the unit is in safe operating condition.

22 WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

23 HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

24 To prevent battery electrolyte leakage, which may

result in injury and damage to the unit or other objects, observe the following precautions: A. All batteries must be installed with the

proper polarity. B. Do not mix new with old or used batteries. C.

Only use batteries of the same type and brand. D. Remove the batteries when they are not to be

used for a long period time. E. When the batteries have become discharged,

they must be disposed of in a safe manner

which complies with all applicable laws.

• DVD, VCD, CD, CD-R(MP3), CD-RW, VHS

• Watching DVD while recording TV broadcasts

• Integrated remote control (VCR, DVD)

• VISS function

• Multiplex sound playback/record

• High Sound Quality of 6 head Hi-Fi

• Simple record function

• MP3 file playback function (CD-R disc having records of MP3 files)

• GUI (Graphical User Interface) through OSD (On Screen Display)

By using the [DISPLAY] button on the remote control, information on the DVD/VCD/CD player and disc, can be displayed on the TV screen.

• Screensaver function (DVD)

• 3D sound (3D sound effect using 2 speakers)

• High bit / High sampling with 27MHz / 10bit video encoder

• High bit / High sampling with 96MHz / 24bit Audio D/A Converter

• Coaxial, Optical digital Audio output (PCM, Dolby Digital, dts)

You can enjoy high-level digital audio by connecting with amp embedded with Dolby Digital / dts decoder.

• Built-in Dolby Digital decoder (DVD)

• Analog audio 2-channels output for DOWNMIX (x1)

• Composite video output (x1)

• Slow Forward / Reverse playback (DVD)

• Fast Forward / Reverse playback

• Search of title, chapter, and time in DVD disc, and search of time and track time in VCD.

• Various TV aspect (DVD)

4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9 for Wide

• Repeat playback (title, chapter, and part for

DVD/ track, disc, and part for VCD/CD)

• Selective Play (DVD/VCD/CD)

You can select and play the desired title / chapter of DVD and track of Video CD/CD in STOP mode.

• 6 languages OSD (On Screen Display) function (DVD)

You can select and display OSD in 6 languages. (E/ F/ S/ G/ I/ D)

• Parental Lock function (DVD)

This function can prevent playback of software that may be unsuitable for children.

• Multi Audio function (DVD)

The audio soundtrack can be heard in up to 8 languages. In the case of SVCD or VCD, it depends on the disc. (The number of audio languages depends on the software.)

• Multi Subtitle function (DVD)

The subtitle can be seem in up to 32 languages. In the case of SVCD or VCD, it depends on the disc. (The number of subtitle languages depends on the software.)

• Multi Angle function (DVD)

This function allows you to choose the viewing angle of scenes which were shot from a number of different angles. (The number of angles depends on the software.)

• Screen zoom function (DVD/VCD)

4 5

Read Carefully before Using

Product information

Identification of Controls

Cautions in use of DVD-Video player are described below.

Please read carefully before using a DVD-Video player.

✔ Installation place and handling

• When you place this player near other devices, they may perform poorly together.

• When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures or failure (tape is not ejected).

• When you place this player near strong magnetic materials, it may affect image or voice poorly or damage recording.

• Do not spill volatile liquids like insect spray over the player. Do not leave rubber or plastic products in contact with the player for a long time. They will cause deterioration or paint peel-off.

✔ Not in use

• When the unit is not in use, be sure to remove the disc or tape and turn off the power.

• If you do not use the unit for a long period, remove batteries in remote control to prevent leakage.

• In case you don’t use the unit for a long time, the unit may not function properly in the future. Turn on and use the player occasionally.

✔ Moving

• Repack the unit as it was originally packed at the factory. Alternatively, pack this product with towel not to be damaged.

• Eject any videotape.

✔ Cleaning

• Dust off dirt in cabinet or control panel part smoothly with a soft cloth.

• For heavy dirt, soak the cloth in a weak detergent solution, wring it well and wipe. Use a dry cloth to wipe it out.

• Follow instructions in using chemical cleaners.

• Do not use any type of solvent such as gasoline or benzene, as they may cause deterioration or paint peel-off.

✔ Checking

✔ Checking and Replacement of Antenna

✔ Copyright

✔ Tape and Disc Handling

✔ Video head cleaning

• Video is a high precision device. To obtain a clear screen, we recommend regular inspection and maintenance every 1,000 hours of use by technical engineers.

• For checking, contact your dealer or your nearest service center.

• Antenna is subject to change in its direction or damage by wind and rain. For clean screen, contact and consult your nearest service center about checking and replacement.

• Do not use your recordings without permission of a copyrighter except personal usage.

• Do not use any tape and disc below. Damage of video head or cut/coiling of tape may cause failure.

- Tape with mold

- Tape or disc stained with juice or attachments

- Tape having breakage connection

- Disassembled tape

- Disc with severe scratch

• Moisture condensation may occur in tape.

Moisture condensation damages the tape. Please use the tape after the moisture condensation is disappeared.

• After use, store tape vertically in a case to

prevent loose.

• Do not store the following places.

- High temperature and humidity

- Subject generation of mold

- Subject to direct sunlight

- Much dirt or dust

- Near strong magnetic materials such as speaker

• Video head cleaning is needed when the playback picture becomes unclear. Use an equivalent high quality chemical non-abreasive head cleaning tape or have them cleaned professionally.

Main body (front panel)

POWER (STANDBY/ON) button

Use to power the device on/off if AC power supply is connected.

Place to insert videotape

Disc tray

VIDEO INPUT jack

AUDIO INPUT jacks

EJECT button

RECORD button

CHANNEL -/+ (Channel Down/Up) button

(

Operation Display Window

Display operation of device. For more information, see “Operation Display Window” (refer to page 8).

)

SELECT button

Use to change DVD mode to VCR mode, and vice versa.

& * )

(

STOP button

Use to stop playing.

REWIND button

Use to rewind currently being played videotape or disc; or to playback back rapidly.

Playback/PAUSE button

Playback videotape or disc. Press this button to pause a screen.

FAST FORWARD button

Use to wind currently being played videotape or disc; or to playback rapidly.

OPEN/CLOSE Tray button

34 5

6 7

Identification of Controls

Product information

Operation Display Window

- RECORDING MODE - - REPEAT MODE -

Timer Recording Standby

Timer Recording Error

Recording in Progress

Timer Recording in Progress

Recording Pause

- DVD OPERATION -

DVD playback

Fast playback

Fast reverse playback

Slow playback

Pause picture

- VCR OPERATION -

[DVD] [VCD]

[DVD VCD]

[VCD]

[DVD VCD]

[DVD]

Repeat one chapter Repeat track

Repeat title Repeat ALL

Repeat a defined period from A

Repeat a defined period from A to B

VCR playback

Fast forward

Rewinding

Fast playback (CUE)

Fast reverse playback (REVIEW)

Slow playback

Main body (Rear Panel)

POWER CORD It is a jack for supplying power to the unit. Connect to outlet in a wall.

AUDIO OUTPUT Jack

COMPONENT OUTPUT Jack

DIGITAL OUTPUT (COAXIAL) Jack To enjoy sound quality of theater level in home, connect this jack with amp or unit embedded with digital audio decoder.

@ # ^ & *

DVD & VCRDVD

AUDO

VDEO

DGIAL

A DO OUT

C M O T O T

A DO O T

COAXAL

OP CAL

DGI

AUDO OUT

$ % (

DIGITAL OUTPUT (OPTICAL) Jack To enjoy quality theatre level sound at home, connect this jack with amp or unit embedded with digital audio decoder.

A/V OUTPUT Jack

A/V INPUT Jack

Connection to ANTENNA Cable

(

Connection to TV

ANT T

Still picture

Stop

Child Lock

8 9

Identification of Controls

Accessories

Remote control 2 Batteries RF cable

• To purchase accessories or not supplied parts additionally, contact your nearest dealer or service center.

Instruction

Manual

Instructions in using REMOTE

• Operate remote control within 7m from the unit.

• Do not press 2(two) buttons at the same time.

• Do not light up sending and receiving part of remote control.

• Do not keep in the place with much dust and humidity.

✔

Remote control battery installation

Detach the battery cover on the rear of the remote control, and insert two AAA

AAA

batteries with the + and - ends aligned

AAA

correctly.

Two “AAA” batteries (supplied).

10 11

Remote Control

$ %

(

)

4 5

Child Lock !

Press the power [ ] button of the remote for about 5 seconds. No buttons of front panel can then

operated and Lock indicator (“ ”) will be displayed on window display. To release child lock, press any button on the remote control.

POWER ON

Player will be POWER ON if any button of the remote control is pressed.

“

‘

[DVD]

OPEN/CLOSE button,

VCR SELECT button

[DVD, VCR]

NUMBER button,

button

SYSTEM button

[DVD]

Activates Progressive Scan button

set

SETUP button

[DVD, VCR]

MOVE/SELECT in OSD,

Up/Down button

[DVD]

TITLE /PBC button

[DVD]

AUDIO LANGUAGE Select,

button

[DVD]

(

SUBTITLE Select button

)

REVERSE SEARCH button

PLAY/PAUSE button

[DVD]

PREVIOUS button (move into a previous chapter

or track)

[VCR]

Record SPEED button

[VCR]

Record button

[VCR]

TV/VCR button

[DVD]

3D button

[VCR]

CM SKIP

[VCR]

Replay button

POWER button

DVD SELECT button

[VCR]

“

INPUT Selection button

‘

CLEAR button

[DVD, VCR]

+ = Q q W w E e

R r T t Y y

OSD DISPLAY button

OK/ENTER button

[DVD]

MENU button

[DVD]

Chapter/Title/Time SEARCH button

[DVD]

ZOOM button

FORWARD SEARCH button

STOP button

[DVD]

NEXT button (Move into a next chapter or track) ,

[VCR]

Frame Advance button in pause mode

[DVD]

REPEAT Playback button

[DVD]

REPEAT a defined period from A to B button

[DVD]

ANGLE button

[DVD]

MARK button

[DVD, VCR]

PROGRAM button

[VCR]

LAST CHANNEL button (Return to the previous

TV channel which was being watched.)

[VCR]

EJECT button

[VCR]

TRACKING -/+

[VCR]

This button is not available for this

[VCR]

Channel

AUDIO Select

Product information

Connecting your player with a RF lead

■ Before you start, unplug all the equipment from the mains supply.

(Option 1) - How to connect with RF lead

REAR PANEL OF DVD-VIDEO

OUTSIDE ANTENNA OR

WALL ANTENNA OUTLET

Aerial

The type of aerial you should use, depends on local interference and how far you are from the transmitter. You should contact a local retailer if you have any questions about your aerial.

Remove circular cable (RF cable) (surplus cable) plugged in “ANT.IN” jack in rear panel of TV. Connect the cable to “ANT” jack in rear panel of DVD-Video.

™

Connect TV to DVD-Video. Connect “TV” jack in DVD-Video with “ANT.IN” jack in TV with RF cable.

In option (1) you need to tune your television to the player so you can see the picture from the player. When it is on the player generates a signal on UHF transmission channel 36, but this might change after tuning in the stations with 'AUTO-SEARCH' . See the 'Check it out' box on page 18. See your television manual for how to tune in a new channel.

REAR PANEL OF TV

ANT N

RF CABLE

NPUT 1

NPUT 2

■ Before you start, unplug all the equipment from the mains supply.

(Option 2) - How to Connect with Audio/Video jack

REAR PANEL OF DVD-V DEO

AUDIO/V DEO CABLE

(If there is AUDIO/VIDEO INPUT jack in TV)

Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in DVD-Video to AUDIO IN jack in TV with connecting cable of Audio/Video jack.

Select VCR mode by pressing TV/INPUT button in TV, you can view a clearer screen and sound than connection with RF cable only.

• VHF: 0 ~14 channels of TV / • UHF: 27~69 channels of TV (For Australia)

• VHF: 1 ~11 channels of TV / • UHF: 21~69 channels of TV (For New Zealand)

• CATV: Broadcasting is transmitted with cable from broadcasting station by contract with the station and consumers. It does not need any antenna.

• In/Out jack in Audio/Video terminal:

- In: A jack used to receive signal required in this unit from other units.

- Out: A jack used to send signal of this unit to other units.

• Connect with Audio/Video terminal, you can enjoy more clear video and audio. (Use INPUT button in this REMOTE to select video mode.)

REAR PANEL OF TV

INPUT 1

ANT N

NPUT 2

Installation

12 13

NPUT 1

OUT

VIDEO (L) AUDIO (R)

ANT N

INPUT 2

Connecting with Other VCR or Camcorder

FRONT PANEL OF DVD-V DEO

REAR PANEL OF PLAYBACK VCR(CAMCORDER)

How to Connect with Jack in Front Panel

REAR PANEL OF DVD-V DEO REAR PANEL OF TV

RF CABLE

Connect AUDIO/VIDEO OUT jack in Camcorder(or playback video) to AUDIO/VIDEO IN jack in rear panel (or front panel) of DVD-Video with connecting cable.

™

Connect “ANT. IN” jack in TV to “TV” jack in DVD-Video with RF cable.

To record contents of camcorder or playback video with DVD-Video, insert recording tape attached recording tab in DVD-Video.

How to Copy(Edit) Tape with Other VCR or Camcorder

Turn on DVD-Video.

™

Press [INPUT] button of remote control and adjust DVD-Video to display “AV” or “AV.F” in TV screen.

Press [PLAY] button in Camcorder or playback video.

Press [REC] button in DVD-Video if you want to record contents of camcorder or playback video.

∞

Press [Pause] button in DVD-Video when unnecessary or undesired scene is displayed in recording.

(Caution) Recording is released automatically after 5 minutes since pressing [PAUSE] button.

Press [REC] button if you want to record again.

Installation

How to Connect with Jack in Rear Panel

How to Playback Chapter Photographed by Camcorder

REAR PANEL OF DVD-VIDEO REAR PANEL OF TV

INPUT 1

V DEO (L) AUDIO (R)

OUT

ANT N

RF CABLE

14 15

NPUT 2

Turn DVD-Video on.

™

Press [INPUT] button of remote control and adjust DVD-Video to display “AV” or “AV.F” in TV screen.

Insert tape in camcorder and play it back.

Connecting with Audio

Connecting to a television with Component

How to Connect with Stereo Unit such as Audio

REAR PANEL OF DVD-VIDEOREAR PANEL OF STEREO UNIT

(L) AUDIO (R)

Connect Audio jack. Connect AUDIO OUT in rear panel of DVD-Video to IN jack of stereo sound unit.

™

For Input Select in stereo unit, Select “External Input” connected with DVD-Video.

Playback DVD disc or Hi-Fi videotape, you can hear sound in speaker of stereo unit.

jack and a Dolby Digital Amp.

■ Use in COMPONENT In jack attached in TV or amp supporting Dolby Digital.

How to Connect

REAR PANEL OF DVD-VIDEO

CONNECT NG CABLE

(NOT SUPPLIED)

(L) AUD O N (R)

DOLBY DIGITAL DECODER-AMPLIFIER

Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are registered trademarks of Dolby Laboratories.

COMPONENT IN

TV CONNECTIONS

Installation

“DTS” and “DTS Digital Out” are trademarks of Digital Theatre Systems, Inc.

16 17

+ 23 hidden pages