Contents
1. Quick Start .................................................................................... 3
Features ...................................................................................... 3
What you need to begin .............................................................. 3
Installing the Battery .................................................................... 4
The Basic Controls ...................................................................... 5
Play Music ................................................................................... 7
Voice Recording .......................................................................... 9
Headphones/Earphones ............................................................. 10
2. Playing Music ............................................................................... 11
Connecting and Disconnecting ................................................... 11
Using the Music Controls ............................................................ 12
Listening to Music ....................................................................... 13
Transferring Music ....................................................................... 14
Customize Your Favorite Play List .............................................. 15
Adjusting Settings ....................................................................... 16
3. Voice Recording ........................................................................... 19
Using the Recorder Controls ....................................................... 19
Record voice to file ...................................................................... 20
Saving the recorded file .............................................................. 20
Listening to recorded files ........................................................... 21
Deleting the recorded file ............................................................ 22
4. Navigating the Software Menus .................................................. 25
The Basics .................................................................................. 25
Diagrams of Top Level Submenus .............................................. 27
5. Tips and Troubleshooting ........................................................... 31
6. Learn More, Service, and Warranty Information ....................... 33
Getting Technical Support ........................................................... 33
Learn More .................................................................................. 33
Your 1-Year SanDisk Limited Warranty ....................................... 34
7. Safety Tips and Cleaning Instructions ....................................... 37
2
1
This chapter helps you get started quickly playing music
and recording with your SanDisk Sansa™ m200 Series
MP3 Player.
Quick Start
Congratulations on your purchase of a SanDisk Sansa m200 Series MP3
Player! This chapter will help you to become familiar with your new purchase
as quickly as possible.
Features
Your SanDisk Sansa m200 Player is a full-featured music device that can be
carried with you anywhere.
Plays MP3, WMA, secure WMA and Audible audio file formats.
Backlit graphic LCD display supports numerous local languages around
the world and displays artist, album and song title information as well as
other important song information.
With 5 equalizer types for the music in your player, you can optimize
your sound for your favorite style of music, for example, Rock, Jazz,
Classical, Pop, and Custom (user-defined).
Sophisticated music library sorting lets you browse the music in your
player by artist, album, song title, genre, year, play list, and other useful
criteria.
Hi-Speed USB 2.0 port for fast and easy transfer of files.
Up to 19 hours of continuous playback using one AAA battery.
Supports voice recording function with built-in microphone.
Supports Microsoft WMDRM 9 and 10.
Fully compatible with subscription music services.
What you need to begin
To add music to the Sansa m200 series MP3 player, the following are needed:
Intel Pentium PC or equivalent.
Windows XP (Windows Media Player 9 or 10).
CD-ROM drive.
Quick Start 3
USB 2.0 port for high-speed transfer.
Supports MP3, WMA, secure WMA and Audible audio file formats.
Your Sansa Package contains:
Sansa m200 Series MP3 Player
Earphones
Armband and Case
AAA battery
USB 2.0 Travel Cable
CD with User Manual
Quick Start Guide
Installing the Battery
Follow the steps as shown in Figure 1:
1. Turn your player over, so the backside faces up, and locate the battery
door at the back of the player.
2. Gently depress the catch at the bottom of the battery cover and lift up.
3. Lift off the battery cover.
4. Push the battery down into the battery area of the player, placing the flat
end (--) of the battery against the spring in the battery area. The protruded top (+) of the battery slips down and under. The battery should fit
snugly.
5. Replace the battery cover until it snaps closed.
Figure 1. Installing the AAA Battery
4 Quick Start
Quick Start 5
The Basic Controls
Your player has an easy to use set of controls that provide a wide range of
functionality. Basic Controls are shown in Figure 2.
Left Side Front Right Side
(Hold, Microphone) (Power/Menu, Volume)
Top (with Headphone Jack, USB)
The control names and their functions are described in Table 1 below.
Table 1: Control Names and Functions
Control Name Function(s)
Power/Menu Button Located on the right side of the player:
• Press and Hold to turn the player on or off.
• Press once to enter the menu
• Press to exit menu display during menu navigati-
on
• Press to cancel the change in setting menu
Select Button Located on the front of the player:
• Select a song or menu
• Press to view secondary information about a
song during playback, for example, song format
and playback data
Play/Pause/Up Button Located on the front of the player:
• Press button to Play/Pause during playback.
• Press button to move up one item during menu
browsing
Repeat/AB/Down Button Located on the front of the player:
• Press once to toggle through the repeat settings:
repeat OFF, repeat (one selection), and
repeat (all selections)
• Press and hold to enable A-B looping
Next/Fast Forward Button Located on the front of the player:
• Press to skip to next song during playback
• Press and hold to Fast forward during playback
• Press to enter a submenu during menu navigati-
on
Previous/ Located on the front of the player:
Fast Reverse Button • Press to skip to previous song during playback
• Press and hold to Fast Reverse during playback
• Press to return to a upper level menu during
menu navigation
Hold Button Located on the left side of the player, slide down to
lock or hold and up to unlock the player.
Volume Button Located on the right side of the player:
• Increase or decrease volume during playback.
USB Port Located at the top of the player, connect a USB
cable from the player to your computer.
6 Quick Start
Quick Start 7
Control Name Function(s)
Earphone Port Located at the top of the player, connect earpho-
nes to listen to the player.
Microphone Located on the left side of the player, use the
microphone for recording sound.
For more information about the onscreen menus, see the Navigating the
Software Menus in the user guide on Page 25.
Play Music
To play music files, you need to transfer music to your player.
Transfer Music
The first step to playing music is to transfer files to your player. Follow these
steps:
1. Use the USB connector cable provided with your player to connect the
USB port on your player to an open USB port on your computer. The
player will appear as a removable drive in Windows File Explorer. (Can’t
find the USB port on your player? See The Basic Controls section on
page 5.)
2. Drag and drop music files to the player from any location on your hard
drive or use a variety of music software to transfer music to your Sansa
player. For more information on how to use specific music software,
please refer to the help files provided with each program.
NOTE: Because your Sansa player automatically organizes your music by
artist, album, song title, genre, and year, you only need to copy your music to
the player. Your Sansa player will automatically create a music library which
you can later sort with easy-to-use menus.
Play Music Files
After you have transferred music files to your player, disconnect the USB
cable from your player and follow these steps:
1. Press the Power/Menu Button once. The SanDisk logo and Sansa logo
will briefly appear onscreen then disappear. (Can’t find the Power/Menu
Button? See The Basic Controls section on Page 5.)
WARNING: If the onscreen message says “Locked” and then shuts off,
locate the Hold Button on the left side of your player. Slide that button
up to unlock your device. Then repeat Step 1 above. See The Basic
Controls section on Page 5 if you cannot find the Hold Button.
NOTE: If you do not see music files onscreen, briefly press the Power/Menu
Button on the right side of your player. The software Menu will appear. Press
the Repeat/AB/Down Button or the Play/Pause/Up Button to highlight Play
Music mode. Press the Select Button to enter Play Music mode.
2. Press the Repeat/AB/Down Button or Play/Pause/Up Button to highlight
an item on the Play Music submenu. Press the Select Button to enter
desired function (for example, Play All, Artist, Album, etc.)
3. Press the Previous/Fast Reverse or Next/Fast Forward Buttons to move
backwards or forwards through your music files.
4. Press once on the Play/Pause/Up Button to play the music files. Once
your selected music has played, your player will play each music file,
one after another. To pause, press the Play/Pause/Up Button again.
5. To change the volume of your music as it plays, push the Volume Button
on the right side of your player.
6. To stop playing a song, you have three choices:
Press and hold down the Power/Menu Button until all the dark squa-
res disappear under the “Powering Down” message.
Navigate to another song with the Previous/Fast Reverse or Next/
Fast Forward Buttons. When you stop, the song displayed onscreen
will play.
Press the Power/Menu Button briefly to access the software Menu
then press the Repeat/AB/Down Button or Play/Pause/Up Button to
switch to Play Music to select another submenu function and music
8 Quick Start
Quick Start 9
file to play. To learn how onscreen menus work, see the Navigating
the Software Menus chapter that begins on Page 25.
Once your music starts to play, you can use the player buttons to:
Skip backwards or forwards to the next song by pressing once on
the Previous/Fast Reverse Button (backwards) or Next/Fast Forward
Button (forwards).
Want to switch to another song while your music plays? Press the
Power/Menu Button to display the software menu onscreen. Press
the Repeat/AB/Down Button to scroll and highlight your menu
choices. Press the Select Button to select options. First, scroll to the
Play Music item and select it. Scroll to select from a list of ways to
access music, for example, by artist, and then select your choice.
Repeat this scroll and select the band, album and song. When your
song is highlighted, press the Select Button to play it.
To learn more about how to play music with your player, see the Playing
Music chapter that begins on Page 11.
Voice Recording
To record your voice as file to your player. Follow these steps:
1. Press the Power/Menu Button once. The SanDisk logo and Sansa logo
will briefly appear onscreen then disappear. (Can’t find the Power/Menu
Button on your player? See The Basic Controls section on page 5.)
WARNING: If the onscreen message says „Locked“ and then shuts off,
locate the Hold Button on the left side of your player. Slide that button
left to unlock your device. Then repeat Step 1 above. See The Basic
Controls section on page 5 if you cannot find the Hold Button.
NOTE: If you do not see the recorder onscreen, briefly press the Power/
Menu Button on the right side of your player. The software Menu will appear.
Press the Repeat/AB/Down Button or the Play/Pause/Up Button to scroll
through the Menu. Highlight Recorder mode and press the Select Button to
enter Recorder mode.
2. Press the Power/Menu Button briefly to access the software Menu then
press the Repeat/AB/Down or the Play/Pause/Up Button to highlight
Recorder mode. Press the Select Button to enter Recorder mode.
3. Press the Play/Pause/Up Button to start recording.
4. During recording, if the Play/Pause/Up Button is pressed, the recording
will pause, and if the Play/Pause/Up Button is pressed again, recording
will resume.
5. To stop recording, you have two choices:
Press the Repeat/AB/Down Button.
Press the Power/Menu Button.
6. To save the recorded file, you have two choices:
During the recording, if one press Repeat/AB/Down Button or
Power/Menu Button, the recording will be stopped and displayed the
message of confirming to save a file or not. Press Next/Fast Forward
Button or Previous/Fast Reverse Button, to toggle between (delete) and (save). Press Select Button to delete or save a file.
Press and hold down the Power/Menu Button until all the dark squa-
res disappear under the “Powering Down” message.
Headphones/Earphones
Do not use headphones/earphones while driving, cycling, or operating any
motorized vehicle. It may create a traffic hazard and may be illegal in some
areas. It can also be dangerous to play your music with headphones/earphones at high volume while walking, or engaged in other activities. You
should exercise extreme caution and discontinue use in potentially hazardous situations.
Avoid using headphones/earphones at high volume. Hearing experts advise
against continuous loud and extended music play.
Keep the volume at a moderate level, so that you are better able to hear
outside sound, and to be considerate of the people around you.
10 Quick Start
Playing Music 11
2
This chapter helps you get started playing music on your
SanDisk Sansa™ m200 Series MP3 Player.
Playing Music
Your player can play music files stored in MP3, WMA, secure WMA and
Audible audio file formats. This chapter shows you how to upload and play
your music files.
Connecting and Disconnecting
Your player includes a USB connection cable so that you can transfer music
files from your computer to your player. The small end fits into the USB port
at the top of your player. The larger flat end connects to the USB port on
your computer.
To play music, first upload files from your computer to your player. Follow
these steps:
1. Use the USB connector cable provided with your player to connect the
USB port on the top of your player to an open USB port on your computer. The player will appear as a Sansa m200 on your computer. (Can’t
find the USB port on your player? See The Basic Controls section on
Page 5.)
2. Drag and drop music files to the player from any location on your hard
drive or use a variety of music software to move music to your Sansa
player. For more information on how to use specific music software,
refer to the help files provided with each program.
NOTE: Because your Sansa Player automatically organizes your music by
artist, album, song title, genre, and year, you only need to copy your music to
the player. Your Sansa player will automatically create a music library which
you can later sort with easy-to-use menus.
Using the Music Controls
Your player has two modes of operation: Play Music and Recorder. To play
your music files, you need to be in Play Music mode. Follow these steps:
3. Press the Power/Menu Button once. The SanDisk logo and Sansa logo
will briefly appear onscreen then disappear. (Can’t find the Power/Menu
Button on your player? See The Basic Controls section on page 5.)
WARNING: If the onscreen message says „Locked“ and then shuts off,
locate the Hold Button on the left side of your player. Slide that button
left to unlock your device. Then repeat Step 1 above. See The Basic
Controls section on page 5 if you cannot find the Hold Button.
4. If you do not see music files onscreen, briefly press the Power/Menu
Button on the right side of your player. The software Menu will appear.
Press the Repeat/AB/Down Button or the Play/Pause/Up Button to scroll
through the Menu. Highlight Play Music mode and press the Select Button to enter.
When you are in Play Music mode, the screen shown in Figure 3 will appear
on your player.
Figure 3: The Music LCD screen
The control buttons and ports for your player are described in The Basic
Controls section on Page 5 More detailed descriptions on how the controls
work is included in the step-by-step instructions throughout this document. In
addition, the Navigating the Software Menus chapter on Page 25 descri-
bes the onscreen menus that appear when you use these controls.
12 Playing Music
Loading...