Samsung Z-99Q User Manual
ELECTRONICS
AH68-10332H
In case the need for Servicing arises
Don't hesitate to call any nearby AS center
with your name, address and telephone number
when anything wrong with your product occurs.
Z-99Q-1 5/13/03 13:48 Page 1-2
OWNER'S
INSTRUCTIONS
Z-99Q
COMPACT
DIGITAL AUDIO
COMPACT
DIGITAL VIDEO
This player does not apply to business use
and CD-ROM/CD graphic discs
cannot be played with this player.
POWER
1
PROGRAM
SOUND REPEAT
PAL/NTSC
SLOW
3456
7 8 9 +10/0
DISC CHANGE
DISC VIEW
ZOOM
2
SELECT
PREV NEXT
STOP
TIME
SEARCH
VOLUME MIC1
LOW KEY CONTROL
SOUNDREPEAT 3D
LAST MEMORY
HIGH
MIN
ON/STANDBY
MAX
MIC
DIGITAL ECHO
2
MIN MAX
123 45
6 7 8 9 +10/0
NEXTPREVIOUS
RETURNSELECT
OPEN/CLOSE
POWER
DISC CHANGE
VIDEO-CD CD PLAYER
Before operating the unit, please
read this manual thoroughly, and
retain for future reference.
Z-99Q-1 5/13/03 13:48 Page 1-3
2
SAFETY PRECAU-
SAFETY PRECAUTIONS
DANGER
This symbol is intended to alert you to the
presence of dangerous voltage within the
product.
CAUTION
This symbol is intended to alert you to the
presence of important instruction
accompanying the product.
WARNING
To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
Enter information here for future reference.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a
CLASS 1 LASER product
Use of controls adjustments or performance of procedures
other than those specified
herein may result in hazardous radiation.
CAUTION-INVISIBLE LASER
RADIATION WHEN OPEN AND INTER
LOCK DEFEATED, AVOID EXPOSURE
TO BEAM.
SPECIAL NOTICE
Warning:
•
This unit contains no user serviceable parts.
Never remove covers unless qualified to do so.
This unit contains dangerous voltages, always remove
main plug from the socket before any service operation
and when not in use for a long period.
Important:
•
This unit is designed for your enjoyment in your home.
We cannot be liable for the quality of the unit if you use it
for commercial use.So please do not use this unit for
commercial use.
IMPORTANT NOTICE
NOTE TO CATV SYSTEM INSTALLER;
•
This reminder is provided to call the CATV system
installer's attention to article 820-40 of the NEC provides
guidelines for proper the cable ground shall be connected to the grounding system of the building, as close to
the point of cable entry as practical.
Date of Purchased:_________________________________
Model No:_________________________________________
Serial No: _________________________________________
Selling Dealer:_____________________________________
Dealer Address:____________________________________
Dealer Phone No: __________________________________
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE TOP COVER, NO USER
SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CLASS 1
LASER PRODUCT
Z-99Q-1 5/13/03 13:48 Page 2
3
•
Do not damage the power cord. Damage to the power
cord may cause a fire or shock hazard.
•
When unplugging the power cord, please hold by the
plug and remove it carefully in standby mode.
•
When you finish operating the unit, always turn off the
power. Leaving a disc loaded for a long time with power
turned on may damage the disc.
•
When you insert the disc, please do not insert over
another disc.
•
This product should not be used in business applications.
•
When the unit is moved from a cold area to a warm area
suddenly, moisture may condense on the mechanical parts
which restricts the laser signal from normal operation.
•
If this occurs, leave the unit with the power turned on for
1~2 hours. (without a disc)
SAFETY INSTRUCTIONS --------------------------------------- 3
CONTROLS AND COMPONENTS ---------------------------- 6
REMOTE CONTROL ---------------------------------------------- 8
TO INSERT BATTERIES ----------------------------------------- 8
SYSTEM CONNECTIONS ------------------------------------- 9
VIDEO-CD PLAYBACK ----------------------------------------- 10
DISC VIEW FUNCTION----------------------------------------- 12
REPEAT FUNCTION--------------------------------------------- 13
PROGRAM FUNCTION ---------------------------------------- 14
ZOOM FUNCTION ---------------------------------------------- 15
SEARCHING FUNCTIONS ----------------------------------- 16
KARAOKE FUNCTION ---------------------------------------- 18
TROUBLE SHOOTING ----------------------------------------- 20
WHEN VIDEO IS DISPLAYED THROUGH SET --------- 21
GENERAL INFORMATION ABOUT THE DISC --------- 21
CARE OF PLAYER AND DISCS------------------------------ 21
SPECIFICATIONS ------------------------------------------------ 22
SAFETY INSTRUCTIONS
CONTENTS
SAFETY INSTRUCTIONS
WHEN MOISTURE CONDENSATION GETS
IN THE UNIT
Z-99Q-1 5/13/03 13:48 Page 3
4
READ INSTRUCTIONS
•
All the safety and operating instructions should be read
before the appliance is operated.
RETAIN INSTRUCTIONS
•
The safety and operating instructions should be retained
for future reference.
HEED WARNINGS
•
All warnings on the appliance and in the operating
instructions should be adhered to.
FOLLOW INSTRUCTIONS
•
All operating and use instructions should be followed.
WATER AND MOISTURE
•
Do not use this video product near water-for example,
near a bathtub, wash bowl, kitchen sink, or laundry tub, in
a wet basement, or near a swimming pool, and the like.
OVERLOADING
•
Do not overload wall outlets and extension cords as this
can result in the risk of fire or electric shock.
VENTILATION
•
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the video product and to protect it from overheating these openings must
not be blocked or covered. The openings should never be
blocked by placing the video product on a bed, sofa, rug, or
other similar surface. This video product should never be
placed near or over a radiator or heat register. This video
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been followed.
POWER CORD PROTECTION
•
Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit
from the appliance.
CLEANING
•
Unplug this video product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
LIGHTNING
•
For added protection of this video product receiver during
a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This
will prevent damage to the video product due to lightning
and power-line surges.
OBJECT AND LIQUID ENTRY
•
Never push objects of any kind into this product through
openings as they may touch dangerous
voltage points or short-out parts that could result in a fire
or electric shock. Never spill liquid of any kind on the
video product.
ACCESSORIES
•
Do not place this video product on an unstable cart, stand,
tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult,
and serious damage to the appliance.
Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow the
manufacturer's instructions and should use a mounting
accessory recommended by the
manufacturer.
CART
•
An appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to
overturn.
POWER SOURCES
•
This video product should be operated only from the type of
power source indicated on the marking label. If you are not
sure of the type of supply to your home, consult your appliance dealer or local power company. For video
products intended to be operated from battery power, or
other sources, refer to the operating instructions.
POWER LINES
•
An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
POLARIZATION
•
This video product is equipped with a polarized
alternating current line plug (a plug having one blade
wider than the other.) This plug will fit into the power outlet only one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
SAFETY INSTRUCTIONS
Z-99Q-1 5/13/03 13:48 Page 4
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION. 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
5
OUTDOOR ANTENNA GROUNDING
•
If an outside antenna is connected to the antenna
terminal, be sure the antenna system is grounded so as to
provide some protection against voltage surges and
built-up static charges.
•
In the U.S.A section 810 of the National Electrical Code,
ANSI/NFPA No. 70-1984, provides information with respect to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors location of
antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode. See the figure below.
ATTACHMENTS
•
Do not use attachments not recommended by the video
product manufacturer as they may cause
hazards.
SERVICING
•
Do not attempt to service this product yourself as opening
or removing covers may expose you to
dangerous voltage or other hazards.
•
Refer all servicing to qualified service personnel.
REPLACEMENT PARTS
•
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or having the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
SAFETY CHECK
•
Upon completion of any service or repairs to this video
product, ask the service technician to perform safety
checks to determine that the video product is in proper
operating condition.
DAMAGE REQUIRING SERVICE
•
Unplug this video product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions.
a. When the power-supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into
the video product.
c. If the video product has been exposed to rain or water
d.If the video product does not operate normally by
following the operating instructions. Adjust only those
controls that are covered by the operating instructions as
an improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the video product to its nor-
mal operation.
e. If the video product has been dropped or the cabinet has
been damaged.
f. When the video product exhibits a distinct change in
performance - this indicates a need for service.
Z-99Q-1 5/13/03 13:48 Page 5
6
CONTROLS AND COMPONENTS
FRONT PANEL
1. DIGIT buttons
2. DISC CHANGE button
3. PREVIOUS/NEXT buttons
4. SELECT(PLAY/PAUSE) button
5. RETURN(STOP) button
6. SOUND button
7. OPEN/CLOSE button
8. POWER button
9. LAST MEMORY button
10. 3D button
11. KEY CONTROL buttons
12. DIGITAL ECHO VOLUME knob
13. MIC jacks
14. MIC VOLUME knob
15. REPEAT button
16. DISC TRAY
VOLUME MIC 1
LOW KEY CONTROL
SOUNDREPEAT 3D
LAST MEMORY
HIGH
MIN
ON/STANDBY
MAX
MIC
DIGITAL ECHO
2
MIN MAX
123 45
6 7 8 9 +10/0
NEXTPREVIOUS
RETURNSELECT
OPEN/CLOSE
POWER
DISC CHANGE
9
10
11
8
7
6
1
2 4 53
12
131415
16
Z-99Q-1 5/13/03 13:48 Page 6
7
CONTROLS AND COMPONENTS
ACCESSORIES
REMOTE CONTROL VIDEO CABLE AUDIO CABLE OWNER'S
INSTRUCTIONS
Power
1
PROGRAM
SOUND
REPEAT
PAL/NTSC
SLOW
3
4
5
6
789
+10/0
AI SLEEP
DISC VIEW
ZOOM
2
SELECT
PREV
NEXT
STOP
TIME
SEARCH
REAR PANEL
1. VIDEO OUTPUT
- Connect to the VIDEO IN of your TV set.
2. AUDIO OUTPUT (AMP)
- Connect to the AUDIO IN of your
STEREO AMPLIFIER.
3. AUDIO OUTPUT (TV)
- Connect to the AUDIO IN of your TV set.
CHANNEL
ADJUST
RF OUTPUT
(TO TV)
RL
AMP
RL
TV
VIDEO
OUT
AUDIO
OUT 1
AUDIO
OUT 2
21 3
Z-99Q-1 5/13/03 13:48 Page 7
Loading...