SAMSUNG YP-ST5X, YP-ST5V User Manual

Location of Controls

YP-ST5 Quick Guide

Recording Button

Play/Pause Button

Hold Switch

Loop Repeating Button

USB Cable Connection Port

ENC Jack

Neck strap Hook

MENU, Navigation button/ Move to Track/Speed Search/ Volume Button

Display

Earphone Jack

Battery Cover

Microphone

Turning Power On and Off

Playing Music

Pausing Music

● Power On : Press the button to turn on the power.

● Power Off : Press and hold the button to turn off the power.

Press the button.

● Playback starts.

Press the button to pause playback.

● If no buttons are pressed within 10 seconds(changes depending on settings),

the yepp automatically powers off.

● While in Pause mode, briefly press again to resume playback.

Disconnecting the USB cable

After completing the file transmission, you must disconnect the cable in the following way:

AH68-01618B (Rev 0.0)

NNoottee :

●

The green arrow is not displayed on the Task Bar in Windows 98. If a “READY” message is shown in Display window, disconnect the USB cable.

Double-click on the green arrow in the taskbar on the bottom right of the window.

When the [Stop a Hardware device] message appears, press the [OK] button and disconnect the USB cable.

Downloading/Uploading files

1 2

NNoottiiccee ::

●

The “WRITING/READING” message will appear during file download or upload. Disconnecting the USB cable while “WRITING/READING” is displayed may cause malfunction of the unit.

●

Files willl not necessarily play back in the order displayed in the Removable Disc in Windows Explorer.

Connect the player to your PC. Open Windows Explorer on PC.

● Removable Disc is displayed in Windows Explorer.

Select the file to save and drag-and-drop it into the removable disk icon. (In numerical, alphabetical order)

Connecting the USB cable

➤ Before connecting the yepp to PC, make sure to install USB driver.

Insert the Installation CD into the CD-ROM drive and then click [Install yepp USB Driver]. Complete the installation by the instructions in the order as they appear in the windows.

Connect a USB cable to the USB port on the computer.

Connect the other end of a USB cable to the USB cable connection port on the bottom of the player.

● If you disconnect the USB cable from your PC while

implementing a command or initializing during USB driver installation, your PC may not function correctly.

Upon installation of the USB driver "Samsung yepp YP-ST5 USB Device" will appear in the [System Properties] ➝ [Device Manager].

The USB driver is installed with a message saying that it is searching for a new device. You may not see the display screen during installation. Go to the device manager to check that installation has been successfully completed.

USB connect cable