Page 1
WASHING MACHINE
Owner’s Instructions
SW-903(P)/SWT90C1(P)/SWT90C2(P)
BEFORE USING THE WASHING MACHINE 1
PRECAUTIONS 1
CONTROL PANEL 2
DESCRIPTION AND CLEANING OF PART 2
WASHING PROCEDURE 3
INSTALLATION 5
LAUNDRY GUIDE 5
MAINTENANCE 6
TROUBLE SHOOTING 6
Before operating the washing machine, please read this manual
thoroughly, and retain it for future reference.
To Wash 3
To Spin Dry 3
To Rinsing 4
Overflow rinse 4
Additional rinse 4
Location 5
Mounting the legs 5
Connecting the drain hose 5
Changing the position of the drain hose
5
Page 2
IF YOU NEED HELP.
Do not hesitate to call your local Samsung Service Center.
They will be pleased to help you. Be sure to give them your name,
address, telephone number and the purpose of the call.
SPECIFICATIONS
DIMENSIONS
WATER PRESSURE
WEIGHT
EXTRACTION EFFICIENCY
STANDARD QUANTITY OF WATER
RATING TIME
SWT90C1(P)/SWT90C2(P)
SW-903(P)
WT10S0(P)/WT10S1(P)/WT10S2(P)
820 x 524 x 1000 mm
820 x 524 x 920 mm
820 x 524 x 993 mm
0.05~0.78 MPa(
36 kg
50 %
Low : 44 l Middle : 56 l High : 67 l
Washing 1 Hour / Spinning 15 minutes
0.5 ~ 8.0kg . f/cm2)
DC68 - 01288A-01
Page 3
Wash/Rinse
Drain Rinse
CYCLE SELECTOR
Wash
Drain
CYCLE SELECTOR
0
3
1
4
2
5
SPIN DRY TIMER
Soft Heavy
Normal
WASH SELECTOR
Delicate
(LITE)
Heavy
Normal
WASH CONTROL
0
9
3
12
6
15
WASH TIMER
WATER SELECTOR
Wash
Spin
BEFORE USING THE W ASHING MACHINE
Drain
Wash
DRAIN SELECTOR
WATER INTAKE
CAUTIONS
CONTROL PANEL
• Remove the cap-hose
from the drain hose.
• In the case of pump drained
washer, remove
the cap-hose from
the drain hole.
PRECAUTIONS WHEN OPERA TING
• Don't use excessively hot water.
(50˚C or more)
Plastic parts may be deformed or damaged.
Also, clothing may be deformed or decolored.
• Before washing,check all pockets.
If nails or pins remain in pockets,they may
damage the washer or clothes.
• Close the water tap a little if the
water pressure is too high.
• Never splash water on the control panel.
• Be sure to cover with the inner
cover on laundry before spinning.
This prevents laundry from
being tossed out and damaged.
• To avoid water splashes, close the
wash tub lid.
• Be sure laythe drain hose down.
(in case no drain pump)
• Be sure that the washer is grounded.
To avoid electrical shock,use a
metal pipe for the ground
connection. But, don't ground the
washer with gas pipes or telephone
lines to avoid to dangers of explosion
or lightning strike.
• Do not put your hands into the
spin dryer basket when it is
spinning.
Your fingers can be caught by
spinning laundry and damaged.
• Never allow children to operate
or play with the washer.
Children playing with the
washer may accidentally
fall into the washing tub.
• Disconnect the power cord from the
power supply when not in use.
• Ventilation opening must not be obstructed
by carpeting when the washing machine is
installed on a carpeted floor.
• If the supply cord of this appliance is
damaged, it must only be replaced by a repair
shopappointed by the manufacturer, because
special purpose tools are required.
• Warning to avoid overfilling and damages this
appliance must be filled with the operator
present using a moderate water supply
pressure only.
•
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
•
To avoid overfilling and damages this appliance
must be filled with the operator present using a
moderate water supply pressure only.
1
1.
WASH TIMMER
This is used to set the
wash time, 1-15 minutes.
2.CYCLE SELECTOR
This is used to set the
Washing/Rinsing
or Draining.
3.
SPIN DRY TIMER
This is used to set the
spin time, 1-5 minutes.
4.WATER
SELECTOR
During washing, WATER SELECTOR
KNOB should be selected.
During spin rinsing, WATER
SELECTOR KNOB should
be selected.
5
.WASH
SELECTOR(CONTROL)
This is used to select wash action.
You can wash laundry effectively
by various methods.
6
.DRAIN SELCTOR
Be sure to press the selector
knob to “WASH” while washing.
7
.WATER INTAKE
Connect water inlet to
a tap with a suitable.
Page 4
DESCRIPTION AND /CLEANING OF PARTS
INNER LID
DRAIN HOSE
(with pump)
OVERFLOW
FILTER
LINT FILTER
This is used for
gathering the
dregs made
during washing.
WASH TUB LID
Be sure to keep
the lid closed
during washing
and spinning.
PULSATOR
CONTROL LEG
CLEANING THE LINT FILTER
• If the dregs are piled up in the
lint filter after finishing the wash,
push down and
pull it out as
shown in
figure.
• Wash the filter
net in water.
the
OVERFLOW FILTER
• Pull the upper side of the
overflow filter with your
fingers into the holes
in the direction of
arrow as shown
in the figure.
SPIN DRYER LID
When you open this
lid while the spin basket is
spinning,the spinning will
be stopped by the brake
system.
SPIN DRYER BASKET
POWER CORD
The plug’s shape
may not be similar to that
shown in this drawing.
WATER DRAIN HOSE
(without pump)
EARTH WIRE
WASH TUB
DRAIN FILTER
OVERFLOW FILTER
Pull the upper side of the
overflow filter with
two
fingers inserted into
hole ‘A’ in the
direction of arrow
as shown in the figure.
CLEANING THE FILTER
• Pull the overflow filter out and take up
the filter by removing 3 screws as
shown in figure. Wash the filter and
washing tub.
CLEANING THE FILTER
• Push the strainer(filter) out and take
up the filter as shown in figure.
Wash the filter and washing tub.
DRAIN FILTER
In case of incomplete drain,
disassemble the drain filter with
screw driver(+), and remove
lints from the filter as shown
in the filter as shown in
the figure.
HOW TO CLEAN THE FILTER
(In case drain pump)
1. Place a rag under the washer filter
not to wet the floor.
2. Rotate the filter counterclockwise
and pull out the filter.
3. Remove dirts and
rotate the filter
A
clockwise until it
locks in position.
CLEANING THE WASH TUB
First, fill water in the wash tub to ‘L’ level( , then drain water from the wash tub simultaneously with
operating wash cycle for 1~2 minutes. •Close the wash tub lid.
2
Page 5
W ASHING PROCEDURE
Delicate
(LITE)
Heavy
Normal
WASH CONTROL
DRAIN
WASH
DRAIN SELECTOR
DRAIN
WASH
DRAIN SELECTOR
WATER SELECTOR
Wash
Spin
Wash/Rinse
Drain Rinse
CYCLE SELECTOR
Wash
Drain
CYCLE SELECTOR
0
3
1
4
2
5
SPIN DRY TIMER
0
9
3
12
6
15
WASH TIMER
0
9
3
12
6
15
WASH TIMER
A-type : SWT90C1(P)/SWT90C2(P)/WT10S0(P)/WT10S1(P)/WT10S2(P) B-type : SW-903(P)
TO WASH (A-type)
TO WASH (B-type)
TO SPIN DRY
1. Before starting to wash, proceed as follows,
Connect the water supply hose and open
the water tap.
• Lay the drain hose down toward
a sinkhole. (In case no drain pump)
• Place the drain hose in sink or bath.
(In case no drain pump)
• Connect the power cord to the power
supply outlet.
2. Set the CYCLE SELECTOR KNOB to
“WASH.RINSE”.(in case drain pump WASH)
3. Set the WTER SELECTOR
KNOB to the desired mode.
4. Set the WASH SELECTOR
KNOB to the desired mode.
5. Fill water in the wash tub
and add the detergent.
6. Load laundry in the
wash tub and fill water
to proper water level.
7. Set the WASH TIMER
1-15 minutes.
1. Before starting to wash, proceed as follows,
Connect the water supply hose and open
the water tap.
• Lay the drain hose down toward
a sinkhole. (In case no drain pump)
• Place the drain hose in sink or bath.
(In case no drain pump)
• Connect the power cord to the power
supply outlet.
2. Select the WASH
CONTROL KNOB
for desired mode.
3. Press the
DRAIN SELECTOR KNOB
to ‘WASH’.
4. Fill water in the wash tub
and add the detergent.
5. Load laundry in the
wash tub and fill water
to proper water level.
6. Set the WASH TIMER
1-15 minutes.
7. After washing Press the
DRAIN SELECTOR KNOB to
‘DRAIN’ for drain.
1. Transfer the clothes into the
spin basket and arrange the
clothes evenly.
2. Be sure to replace the safety
cover and close the
inner lid.
inner lid
safty cover
3. Close the spin
dryer lid.
4. Set the SPIN DRY
TIMER 1-5 minutes.
8. After washing, set the CYCLE
SELECTOR KNOB to
'DRAIN' for drain.
3
Page 6
TO RINSING (A-type)
Wash/Rinse
Drain Rinse
CYCLE SELECTOR
Wash
Drain
CYCLE SELECTOR
Wash/Rinse
Drain Rinse
CYCLE SELECTOR
Wash
Drain
CYCLE SELECTOR
0
9
3
12
6
15
WASH TIMER
0
9
3
12
6
15
WASH TIMER
0
9
3
12
6
15
WASH TIMER
0
9
3
12
6
15
WASH TIMER
0
9
3
12
6
15
WASH TIMER
0
9
3
12
6
15
WASH TIMER
DRAIN
WASH
DRAIN SELECTOR
DRAIN
WASH
DRAIN SELECTOR
DRAIN
WASH
DRAIN SELECTOR
WATER SELECTOR
Wash
Spin
0
3
1
4
2
5
SPIN DRY TIMER
OVER FLOW RINSE (A-type)
ADDITIONAL RINSE
1. Set the cycle selector KNOB to
‘WASH.RINSE’.
(In the case of drain
pump ‘WASH’)
2. Supply the proper amount of water
so as not to delete one space overflow
the top of the washing tub.
3. Set the WASH TIMER to
2~3 minutes.
4. Drain the water.
Set the delete one space cycle
selector KNOB to ‘DRAIN’.
5. Repeat this cycle until drain
water is clean. (2~3 cycles)
TO RINSING (B-type)
1. Press the DRAIN SELECTOR
KNOB to ‘WASH’.
2. Supply the proper amount
of water so as not to
delete one space overflow
the top of the washing tub
and put the laundry
into the washing tub.
3. Set the WASH TIMER
2~3 minutes.
4. Drain the water.
Set the DRAIN SELECTOR
KNOB to ‘DRAIN’.
5. Repeat this cycle until drain
water is clean. (2~3 cycles)
1. Keep supplying
water(adjust water
pressure to ensure
that the amount of
water supplied
does not exceed the amount
of water drained.)
2. Set the WASH TIMER
6~8 minutes.
3. As soon as the
WASH TIMER
shuts off, turn off
the water tap.
4. Set the CYCLE
SELECTOR KNOB
to ‘DRAIN’.
OVER FLOW RINSE (B-type)
1. Keep supplying
water(adjust water
pressure to ensure
that the amount of
water supplied
does not exceed the amount
of water drained.)
2. Set the WASH TIMER
6~8 minutes.
3. As soon as the
WASH TIMER
shuts off, turn off
the water tap.
4. Press the DRAIN SELECTOR
KNOB to ‘DRAIN’.
4
1 After rinsing you can select this
course for more effective rinse
(Don't just select this course
for rinse.) Load the laundry
evenly into the spin basket.
2 Set the WATER SELECTOR
KNOB to SPIN and
CYCLE SELECTOR
KNOB to ‘DRAIN’.
3 Supply water for about 1 minute.
Adjust the water flow to prevent
overflow from the wash tub.
4 After completing the water supply,
cover the laundry with
safety cover and close
the inner lid.
safety
cover
inner lid
5 Close the spin dryer lid.
6 Set the SPIN DRY
TIMER 2~3 minutes.
Page 7
70~80cm
1
2
INSTALLATION
(C)
(b)
(C)
(b)
(a)
2
1
LAUNDRY GUIDE
LOCATION
Leave some space of
at least 15cm between the washing machine
and the wall.
Place the washing machine on a sturdy flat
surface.
If the washing machine is placed on an uneven
or weak surface, noise or vibration may occur.
(Allowable is 2˚)
Never install the washing machine near water.
Do not place the washing machine in steamy room or
where the washing machine is directly exposed t o
rain. Moisture may damage electrical insulation
and cause an electrical shock to occur.
Avoid direct sunlight or heating devices.
As plastic and electrical components are
affected by direct heat, never place the washing
machine near heaters, boilers, etc., or under direct
sunlight.
Install the drain hose
about 70~80cm above
the ground for pump model.
MOUNTING THE LEGS
Lay down the washer with its back facing
downward. Insert four legs into the leg mounting
sections of the base corners of the main body.
Insert the claw of the
leg with the square
hole of the leg
mounting section,
and push the leg in
the arrow direction
Leg
as shown in the
figure until it clicks.
Claw
Square
hole
Bottom face of
main body
CONNECTING THE DRAIN HOSE
After attaching the connector ring(a), insert the
drain hose(b) in the draining direction.
a
b
CONNECTING THE DRAIN HOSE
1. Before connecting the drain hose, remove
the cover (a) from the drain hole.
2. After pressing the joint ring (b), insert the
drain hose(c) to drain direction.
(In case of pump
drained washer)
CHANGING THE POSITION OF THE
DRAIN HOSE
Before attempting to change the position of the
drain hose, disconnect the plug from the outlet.
1. Route the drain hose inside the machine.
2.Take out the drain hose from the opposite hole
and insert the drain hose into the hose holder.
Hose holder
WASHING TIME
Water Level
Sgurts (Synthetics)
Under Shirts (Cotton)
Workign clothes (Cotton)
Low
22 Pieces
38 Pieces
16 Pieces
Middle
29 Pieces
48 Pieces
20 Pieces
High
35 Pieces
58 Pieces
25 Pieces
SPIN DRY TIME
TIME
1 min.
1~2 min.
3~5 min.
5 min.
TYPE OF FABRIC
Thin (synthetic fiber)
wool
cotton
thick (cotton)
DETERGENT
The amount of detergent
is average. Follow the
AMOUNT OF
DETERGENT
instruction printed on the
package for amount of
detergent. Choose the
amount of detergent
according to the fabric type.
44g
56g
67g
WATER
LEVEL
Low (44l )
Medium (56l )
High (67l )
DETERGENT
In case the water level is at “High”,
amount of water is 42l.
Follow the directions printed on the package
for amount of detergent. Choose the amount of
detergent depending on the fabric type and
water level.
-H-
5
Page 8
MAINTENANCE TROUBLE SHOOTING
AFTER OPERATION
TO LOAD THE LAUNDRY INTO
THE SPIN BASKET.
Press the laundry evenly and put the safety
cover into the spin basket as shown in the
figure.
TO RETRIEVE THE CLOTHING THAT HAS
FALLEN BETWEEN THE BASKET AND TUB.
For safety reason, pu ll th e power supply plug out
of the socket.
1. Unscrew the spin dryer hatch.
2. The spin dryer hatch is
fixed to the brim by the
concave and convex
parts at two places.
Expand the concave and
convex parts,and pull up
the spin dryer hatch to
remove it.
3. Retrieve the clothing.
4. Close the spin dryer hatch. Push the hatch
firmly until the catch at the front is securely
attached.
TROUBLE CHECK POINT
The washing
machine does
not work.
Clothes do
not move freely.
Incomplete
spinning
Incomplete
draining
The spin dryer
basket will not
run.
Check that the power cord is
properly connected to a power
outlet. Is there a power failure?
Is the machine overloaded?
Is the laundry arranged
evenly?
Is the filter clogged with lint?
Is the spin dryer lid closed
completely?
Are laundry items (socks, etc.) falling
out of the spin dryer basket and
clinging to the axle?
• See “To retrieve...”on page 6.
1. Remove the power cord from the outlet.
2. Take out the laundry.
3. Close the water tap and disconnect the water
supply hose.
4. Clean the washing machine.
- Periodical cleaning will extend the life of your
washing machine.
- Do not spray the unit water or use tinner, benzene,
alcohol etc, for cleaning it.
CLEANING THE WASHING MACHINE
Wipe off stains on the cabinet and operation pane
with a soft cloth. Neither use benzene, thinner,
cleanser, or wax, nor scrub the washing machine
with a brush. Painted surfaces or plastic parts will
be damaged.
6
Loading...