Samsung WS32M66T, WS32M166VG, WS32A116V, WS-32Z68P, WS28A116T User Manual [en, en]

...
COLOUR TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
(OPTION)
TELETEXT
2
ENG
Safety Instructions
Do not expose the television to extreme temperature conditions or to extreme humidity conditions.
Do not expose the television to direct sunlight and other sources of heat.
Do not expose the television to any liquids.
Never put objects of any kind into the television, and do not place a water-containing vessel on the
television.
During a storm conditions (especially when there is lightning) unplug the television from the mains
socket and aerial.
Do not step on or twist the power cord.
Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.
Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
If the remote control is not used for a long period of time, remove the batteries and store it in a
cool, dry place.
Do not drop the remote control.
This device is not for use in industrial environments.
Caution
WARNING: TO PREVENT DAMAGE WHICH MAY RESULT
IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRICAL SHOCK,
DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lightning flash and arrow head within the triangle is a warning sign alerting you of “dangerous voltage” inside the product.
The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.
The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.
3
ENG
Contents
FOREWORD
Safety Instructions......................................................................................... 2
Caution.......................................................................................................... 2
CONNECTING AND PREPARING YOUR TELEVISION
View of Your Television................................................................................. 5
Infrared Remote Control (All Functions Except Teletext & PIP).................... 6
Inserting the Batteries in the Remote Control................................................ 7
Connecting to an Aerial or Cable Television Network................................... 7
Switching Your Television On and Off........................................................... 8
Placing Your Television in Standby Mode..................................................... 8
Becoming Familiar with the Remote Control................................................. 9
Plug & Play Feature....................................................................................... 10
Viewing the Demonstration............................................................................ 11
Choosing Your Language.............................................................................. 11
SETTING THE CHANNELS
Storing Channels Automatically..................................................................... 12
Sorting the Stored Channels ......................................................................... 13
Storing Channels Manually............................................................................ 14
Assigning Names to Channels ...................................................................... 16
Skipping Unwanted Channels ....................................................................... 17
Fine Tuning Channel Reception.................................................................... 18
USING YOUR TELEVISION (continued)
Changing the Picture Standard ..................................................................... 19
Adjusting the Picture Settings........................................................................ 20
Extra Picture Settings
(Scan mode / Digital NR / Tilt / LNA)............................................................. 21
Setting the Blue Screen................................................................................. 22
Selecting the Picture Size.............................................................................. 22
Freezing the Current Picture ......................................................................... 22
Changing the Sound Standard...................................................................... 23
Adjusting the Sound Settings ........................................................................ 24
Selecting the Turbo Sound............................................................................ 24
Extra Sound Settings
(Auto volume / Melody / Pseudo stereo / Virtual surround)........................... 25
Selecting the Sound Mode (depending on the model) .................................. 26
4
ENG
Contents (continued)
USING YOUR TELEVISION
Setting the Sleep Timer................................................................................. 27
Setting and Displaying the Current Time....................................................... 28
Switching the Television On and Off Automatically....................................... 29
Viewing the Picture In Picture (PIP) : Option................................................. 30
USING THE TELETEXT FEATURE
Teletext Feature ............................................................................................ 32
Displaying the Teletext Information............................................................... 32
Selecting a Page by Number......................................................................... 33
Using FLOF to Select a Page........................................................................ 34
Storing Teletext Pages.................................................................................. 34
ADDITIONAL INFORMATION ON CONNECTIONS
Connecting to the External Input/Outputs...................................................... 35
Connecting to the Audio Output .................................................................... 35
Connecting to the RCA Input......................................................................... 36
Connecting to the S-Video Input.................................................................... 36
Connecting Headphones............................................................................... 37
Viewing Pictures From External Sources...................................................... 37
RECOMMENDATIONS FOR USE
Automatic Degaussing to Remove Colour Patches....................................... 38
Troubleshooting: Before Contacting Service Personnel................................ 38
Wiring the Mains Power Supply Plug (UK Only)............................................ 39
Press Important Note
Symbols
5
View of Your Television
ENG
Standby Indicator
Remote Control Sensor
Power On/Off
Input Source Selection
Menu Display
Volume Increase
Previous Channel
Volume Decrease
Next Channel
Audio Input (R, L)
Video Input
S-Video Input
Headphone connector
SCART Audio/Video Input/Output
Monitor Audio Output
75Coaxial Connector for Aerial/Cable Network
Rear of the TV
2
MONITOR
AUDIO OUT
L
75
1
RGB
R
6
Infrared Remote Control
ENG
The performance of the remote control may be affected by bright light.
TELEVISION STAND-BY
ONE/TWO-DIGIT CHANNEL
SELECTION/
TELETEXT PAGE HOLD
TURBO SOUND
TUNER/CABLE NETWORK
SELECTION
VOLUME DECREASE
NEXT CHANNEL/
TELETEXT NEXT PAGE
AUTOMATIC SWITCH-OFF/
TELETEXT STORE
TEMPORARY SOUND SWITCH-OFF
EXTERNAL INPUT SELECTION/ TELETEXT MODE SELECTION (LIST/FLOF)
ON-SCREEN DISPLAY/ TELETEXT REVEAL
DIRECT CHANNEL SELECTION
PICTURE SIZE/
TELETEXT SIZE SELECTION
PREVIOUS CHANNEL\ TELETEXT PREVIOUS PAGE
VOLUME INCREASE
PICTURE EFFECT SELECTION
STILL PICTURE
SOUND MODE SELECTION/ TELETEXT SUB-PAGE
MENU DISPLAY/ PROGRAMME SELECTION BY NAME
PICTURE MENU DISPLAY
SOUND EFFECT SELECTION
SOUND MENU DISPLAY
VCR OR DVD FUNCTIONS;
- STOP
- REWIND
- PLAY/PAUSE
- FAST FORWARD
FASTEXT TOPIC SELECTION
MAKE THE REMOTE CONTROL WORKS FOR TV, VCR, CABLE, DVD PLAYER.
The remote control might not be compatible with the TV manufactured by another company.
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
PIP FUNCTIONS (OPTION);
-PIP ON/OFF
- INTERCHANGE THE MAIN AND SUB PICTURE (SWAP)
- STILL
- SIZE SELECTION (SIZE)
- LOCATION SELECTION (LOCATE)
- SCAN
- SOURCE SELECTION (TV/VIDEO)
- CHANNEL SELECTION (P
/)
PIP
You must insert or replace the batteries in the remote control when you:
Purchase the television
Find that the remote control is no longer operating
correctly
1 Remove the cover on the rear of the remote control by pressing
the symbol downwards and then pulling firmly to remove it.
2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆-on the battery against -on the remote control
◆+on the battery against +on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
7
To view television channels correctly, a signal must be received by the set from one of the following sources:
An outdoor aerial
A cable television network
A satellite network
1 In the first three cases, connect the aerial or network input cable to
the 75coaxial socket on the rear of the television.
2 If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp and clear. For further details, refer to:
“Storing Channels Automatically ” on page 10
“Storing Channels Manually” on page 12
Connecting to an Aerial or Cable Television Network
ENG
Rear of the TV
Cable Television
Network
or
Inserting the Batteries in the Remote Control
8
ENG
The mains lead is attached to the rear of your television.
If you have purchased this television in the United Kingdom, refer to page 39 for further instructions on plug wiring.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2 Press the “ ” button (On/Off) on the front of the television.
Result
: The Standby indicator on the front of the television
lights up.
3 Press the POWER () button on the remote control to switch the
television on. Result
: The programme that you were watching last is re-
selected automatically.
If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 12 or “Storing Channels Manually” on page 14.
4 To switch your television off, press the “ ” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
Power consumption
Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1 Press the POWER () button on the remote control.
Result
: The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2 To switch the television back on, simply press the POWER ()
button again.
Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn your television off by pressing the “ ” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial.
Switching Your Television On and Off
Front of the TV
9
The remote control is used mainly to:
Change channels and adjust the volume
Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and their functions.
Button Viewing Function Menu Function
Used to display the next Used to select the previous
P stored channel. menu option. P Used to display the Used to select the next menu
previous stored channel. option.
to Used to display the corresponding channels.
-/--
Used to select a channel numbered ten or over. Press this button, and the “
--
” symbol is displayed.
Enter the two-digit channel number.
Used to decrease the Used to... volume.
Display a submenu containing selections for the current menu option.
Search backwards manually for channels
Reduce a menu option value.
Used to increase the Used to... volume.
Display a submenu containing selections for the current menu option.
Search forwards manually for channels
Increase a menu option value.
MUTE Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or press the
-
or + button.
MENU Used to display the Used to return to the previous
on-screen menu system. menu or normal viewing.
TV Used to switch the Used to exit from the menu
television on when it is system and return to normal in Standby mode. viewing directly.
Becoming Familiar with the Remote Control
ENG
PIP
10
ENG
When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.
1 If the television is in Standby mode, press the POWER () button
on the remote control. Result
: The message Plug & Play is displayed. It flickers for
a little while and then
Language menu is automatically
displayed.
2 Select the appropriate language by pressing the or
button. Press the
MENU button to enter the language.
Result
: The message Ant. Input : Check is displayed.
If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later.
3 Make sure that the antenna is connected to the TV. Press the
-
or
+ button.
Result
: The
Auto store menu is displayed with Country is
selected.
4 Select your country by pressing the
-
or + button. To search the
channels, select
Search by pressing the or button, and
then press the
-
or + button. Press the MENU button to stop the
search. Result
: The
Time menu is displayed with Clock is selected.
Refer to “Storing Channels Automatically” on page 12.
5 Press the
-
or + button to move to the hour or minute. Set the
hour or minute by pressing the or button.
Refer to “Setting and Displaying the Current Time” on page
28.
6 When you have finished, press the MENU button.
Result
: The message ENJOY YOUR WATCHING is displayed,
and then the channel which has been stored will be activated.
7 If you want to reset this feature...
1 Press the MENU button.
2 Press the or button to select Function, and then
press the
-
or + button.
3 Select Plug & Play by pressing the or button, and
then press the
-
or + button.
Result
: This feature starts with the message
Plug & Play
is displayed.
Plug & Play Feature
Plug & Play
Ant. Input : Check
Select Exit
Select Adjust Exit
Auto store
Country : Others Search : -/+
Select Adjust Exit
Time
Clock : -- : -­Timer : Off
Select Enter Exit
Function
Language
Time
Plug & Play
Blue screen : On Demonstration
ENJOY YOUR WATCHING
11
To become familiar with the various menus provided by your television, you can view the inbuilt demonstration.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the or button to select Function.
Result
: The options available in the Function group are
displayed.
3 Press the
-
or + button.
4 Press the or button to select Demonstration. 5 Press the
-
or + button.
Result
: Each of the menu options is displayed in turn.
When you wish to exit from the demonstration, press the TV button on the remote control.
When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the or button to select Function .
Result
: The options available in the Function group are
displayed.
3 Press the
-
or + button.
Result
: The Language is selected.
4 Select the appropriate language by pressing the
-
or + button
repeatedly.
Viewing the Demonstration
Choosing Your Language
ENG
Select Enter Exit
Function
Language
Time
Plug & Play
Blue screen : On Demonstration
Select Enter Exit
Function
Language
Time
Plug & Play
Blue screen : On Demonstration
12
ENG
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the or button to select Channel.
Result
: The options available in the Channel group are
displayed.
3 Press the
-
or + button.
Result
: The Auto store is selected.
4 Press the
-
or + button again.
Result
: The options available in the Auto store group are
displayed with
Country is selected.
5 Select your country by pressing the
-
or + button. The countries
are displayed in the following order:
Others-Belgie
-
Deutschland-España-France-Italia-Nederland
-
Schweiz-Sverige-UK-East Europe.
6 Press the or button to select Search. 7 Press the
-
or + button to start the search.
Result
: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically.
To stop the search before it has finished, press the MENU
button.
8 When searching and storing are complete, the Sort menu is
displayed.
To sort the stored channels into the desired numerical order, go to Step
6 of the “Sorting the Stored Channels” procedure
on page 13.
To exit from the channel store function without sorting the channels, press the
MENU button repeatedly until the menus
disappear.
9 When the channels have been stored, you can:
Sort them in the order required (refer to page 13)
Assign a name to the stored channels (refer to page 16)
Clear a channel (refer to page 17)
Fine tune channel reception if necessary (refer to page 18)
Activate the Digital Noise Reduction feature (refer to page 21)
Storing Channels Automatically
Select Adjust Exit
Auto store
Country : Others Search : -/+
Select Enter Exit
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Sort
Select Search Exit
Auto store
Country : Others Search : -/+
Exit
P 1 C-- ----­106 MHz 7 %
Select Adjust Exit
Sort
From : P 1 ----­To : P-- ----­Store : ?
Loading...
+ 28 hidden pages