Samsung WS32Z46V, WS28Z46V, WS-32M166T, CW29Z68P, CW29M66V User Manual [en, en]

...
COLOUR TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
2
ENG
Safety Instructions
Do not expose the television to extreme temperature conditions or to extreme humidity conditions.
Do not expose the television to direct sunlight and other sources of heat.
Do not expose the television to any liquids.
Never put objects of any kind into the television, and do not place a water-containing vessel on the
television.
During a storm conditions (especially when there is lightning) unplug the television from the mains
socket and aerial.
Do not step on or twist the power cord.
Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.
Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
If the remote control is not used for a long period of time, remove the batteries and store it in a
cool, dry place.
Do not drop the remote control.
This device is not for use in industrial environments.
Caution
WARNING: TO PREVENT DAMAGE WHICH MAY RESULT
IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRICAL SHOCK,
DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lightning flash and arrow head within the triangle is a warning sign alerting you of “dangerous voltage” inside the product.
The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.
The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.
3
ENG
Contents
FOREWORD
Safety Instructions......................................................................................... 2
Caution.......................................................................................................... 2
CONNECTING AND PREPARING YOUR TELEVISION
View of Your Television................................................................................. 5
Infrared Remote Control (All Functions Except Teletext Functions).............. 6
Infrared Remote Control (Teletext Functions)............................................... 7
Inserting the Batteries in the Remote Control................................................ 8
Connecting to an Aerial or Cable Television Network................................... 9
Switching Your Television On and Off........................................................... 10
Placing Your Television in Standby Mode..................................................... 10
Becoming Familiar with the Remote Control................................................. 11
Plug & Play Feature....................................................................................... 12
Viewing the Demonstration............................................................................ 13
Choosing Your Language.............................................................................. 13
SETTING THE CHANNELS
Storing Channels Automatically..................................................................... 14
Sorting the Stored Channels ......................................................................... 15
Storing Channels Manually............................................................................ 16
Skipping Unwanted Channels ....................................................................... 18
Assigning Names to Channels ...................................................................... 19
Fine Tuning Channel Reception.................................................................... 20
USING YOUR TELEVISION (continued)
Changing the Picture Standard ..................................................................... 21
Adjusting the Picture Settings........................................................................ 22
Activating/Deactivating the Digital Noise Reduction Feature ........................ 23
Setting the Blue Screen................................................................................. 24
Using the Tilt Control Feature........................................................................ 24
Selecting the Picture Size.............................................................................. 25
Freezing the Current Picture ......................................................................... 25
Changing the Sound Standard...................................................................... 25
Adjusting the Sound Settings ........................................................................ 26
Extra Sound Settings
(Auto volume / Melody / Turbo sound / Pseudo stereo / Virtual surround).... 27
Selecting the Sound Mode (depending on the model) .................................. 28
4
ENG
Contents (continued)
USING YOUR TELEVISION
Setting the Sleep Timer................................................................................. 29
Setting and Displaying the Current Time....................................................... 30
Switching the Television On and Off Automatically....................................... 31
USING THE TELETEXT FEATURE
Teletext Feature ............................................................................................ 32
Displaying the Teletext Information............................................................... 32
Selecting a Page by Number......................................................................... 33
Using FLOF to Select a Page........................................................................ 34
Storing Teletext Pages.................................................................................. 34
ADDITIONAL INFORMATION ON CONNECTIONS
Connecting to the External Input/Outputs...................................................... 35
Connecting to the Audio Output .................................................................... 35
Connecting to the RCA Input......................................................................... 36
Connecting to the S-Video Input.................................................................... 36
Connecting Headphones............................................................................... 37
Viewing Pictures From External Sources...................................................... 37
RECOMMENDATIONS FOR USE
Automatic Degaussing to Remove Colour Patches....................................... 38
Troubleshooting: Before Contacting Service Personnel................................ 38
Wiring the Mains Power Supply Plug (UK Only)............................................ 39
Press Important Note
Symbols
5
ENG
View of Your Television (depending on the model)
Audio Input (R, L)
Video Input
S-Video Input
Headphone connector
SCART Audio/Video Input/Output
Monitor Audio Output
75Coaxial Connector for Aerial/Cable Network
Rear of the TVSide of the TV
Control Panels
Connection Panels
d
e
f
g
a
b
c
h
i
Front of the TV
The actual configuration on your TV may be different, depending on your model.
a) Input source selection
b) Menu display
c) Volume decrease
d) Volume increase
e) Previous channel
f) Next channel
g) Standby indicator
h) Remote control sensor
i) Power On/Off
6
ENG
Infrared Remote Control (All Functions Except Teletext Functions)
The performance of the remote control may be affected by bright light.
TELEVISION STAND-BY
TURBO SOUND ON/OFF
ONE/TWO-DIGIT CHANNEL
SELECTION
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
PREVIOUS CHANNEL
VCR FUNCTIONS
DIRECT CHANNEL SELECTION
AUTOMATIC SWITCH-OFF
STILL PICTURE
SOUND MENU DISPLAY
PICTURE MENU DISPLAY
TUNER/CABLE NETWORK SELECTION
EXTERNAL INPUT SELECTION
ON-SCREEN DISPLAY
PICTURE EFFECT SELECTION
NEXT CHANNEL
VOLUME INCREASE
PICTURE SIZE SELECTION
SOUND MODE SELECTION SOUND EFFECT SELECTION
MENU DISPLAY
Buttons and markings are subject to change.
7
ENG
Infrared Remote Control (Teletext Functions)
Buttons and markings are subject to change.
FASTEXT TOPIC SELECTION
TELETEXT PAGE HOLD
TELETEXT STORE
TELETEXT NEXT PAGE
TELETEXT PREVIOUS PAGE
TELETEXT DISPLAY/ MIX BOTH TELETEXT INFORMATION AND THE NORMAL BROADCAST
TELETEXT MODE SELECTION (LIST/FLOF)
TELETEXT REVEAL
TELETEXT SUB-PAGE
TELETEXT SIZE SELECTION
PROGRAMME SELECTION BY NAME
You must insert or replace the batteries in the remote control when you:
Purchase the television
Find that the remote control is no longer operating
correctly
1 Remove the cover on the rear of the remote control by pressing
the symbol downwards and then pulling firmly to remove it.
2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆-on the battery against -on the remote control
◆+on the battery against +on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
8
ENG
Inserting the Batteries in the Remote Control
PRESS
PRESS
9
To view television channels correctly, a signal must be received by the set from one of the following sources:
An outdoor aerial
A cable television network
A satellite network
1 In the first three cases, connect the aerial or network input cable to
the 75coaxial socket on the rear of the television.
2 If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp and clear. For further details, refer to:
“Storing Channels Automatically ” on page 14
“Storing Channels Manually” on page 16
Connecting to an Aerial or Cable Television Network
ENG
Rear of the TV
Cable Television
Network
or
10
ENG
The mains lead is attached to the rear of your television.
If you have purchased this television in the United Kingdom, refer to page 39 for further instructions on plug wiring.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2 Press the “ ” button (On/Off) on the front of the television.
Result
: The Standby indicator on the front of the television
lights up.
3 Press the POWER () button on the remote control to switch the
television on. Result
: The programme that you were watching last is re-
selected automatically.
If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 14 or “Storing Channels Manually” on page 16.
4 To switch your television off, press the “ ” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
Power consumption
Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1 Press the POWER () button on the remote control.
Result
: The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2 To switch the television back on, simply press the POWER ()
button again.
Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn your television off by pressing the “ ” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial.
Switching Your Television On and Off
Front of the TV
11
The remote control is used mainly to:
Change channels and adjust the volume
Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and their functions.
Button Viewing Function Menu Function
Used to display the next Used to select the previous
stored channel. menu option.
Used to display the Used to select the next menu
previous stored channel. option.
to Used to display the corresponding channels.
-/--
Used to select a channel numbered ten or over. Press this button, and the “
--
” symbol is displayed.
Enter the two-digit channel number.
-
Used to decrease the Used to... volume.
Display a submenu containing selections for the current menu option.
Search backwards manually for channels
Reduce a menu option value.
+
Used to increase the Used to... volume.
Display a submenu containing selections for the current menu option.
Search forwards manually for channels
Increase a menu option value.
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or press the
-
or + button.
MENU Used to display the Used to return to the previous
on-screen menu system. menu or normal viewing.
TV Used to switch the Used to exit from the menu
television on when it is system and return to normal in Standby mode. viewing directly.
Becoming Familiar with the Remote Control
ENG
12
ENG
When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.
1 If the television is in Standby mode, press the POWER () button
on the remote control. Result
: The message Plug & Play is displayed. It flickers for
a little while and then
Language menu is automatically
displayed.
2 Select the appropriate language by pressing the or button.
Press the
MENU button to enter the language.
Result
: The message Ant. Input : Check is displayed.
If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later.
3 Make sure that the antenna is connected to the TV. Press the
-
or
+ button.
Result
: The
Auto store menu is displayed with Country is
selected.
4 Select your country by pressing the
-
or + button. To search the
channels, select
Search by pressing the or button, and then
press the
-
or + button. Press the MENU button to stop the
search. Result
: The
Time menu is displayed with Clock is selected.
Refer to “Storing Channels Automatically” on page 14.
5 Press the
-
or + button to move to the hour or minute. Set the
hour or minute by pressing the
or button.
Refer to “Setting and Displaying the Current Time” on page
30.
6 When you have finished, press the MENU button.
Result
: The message ENJOY YOUR WATCHING is displayed,
and then the channel which has been stored will be activated.
7 If you want to reset this feature...
1 Press the MENU button.
2 Press the or button to select Setup, and then press the
-
or + button. Result
: The Plug & Play is selected.
3 Press the -or + button again.
Result
: This feature starts with the message
Plug & Play
is displayed.
Plug & Play Feature
Plug & Play
ENJOY YOUR WATCHING
Setup
Plug & Play
Language
Blue screen : On Demonstration
Tilt : 0
TV
Auto store
Country : Others Search : -/+
TV
Time
Clock : -- : -­Timer : Off
TV
Ant. Input : Check
Loading...
+ 28 hidden pages