Take the time to read through this user guide before you start to use
WEP900 Bluetooth Headset.
Bluetooth® is a registered trademark of the Bluetooth SIG, Inc.
worldwide—Bluetooth QD ID: Bxxxxxx
More information about Bluetooth is available at www.bluetooth.com.
Safety precautions
Never disassemble or modify your headset for any reason. Doing this
•
may cause the headset to malfunction or become combustible. Bring
the headset to an authorised service centre to repair it or replace the
battery.
When using your headset while driving, follow local regulations in the
•
country or region you are in.
Avoid storage at high temperatures (above 50° C/122° F), such as in
•
a hot vehicle or in direct sunlight, as this can damage performance
and reduce battery life.
Do not expose the headset or any of its supplied parts to rain or other
•
liquids.
At very high volumes, prolonged listening to the headset can damage
your hearing.
2
Getting started
This section explains what to remember for the proper use of your
Bluetooth headset.
Your headset overview
English
Ear hook
Talk button
Earpiece
Microphone
Make sure you have the following items with your headset :
Charger, User guide, Leather case.
The items supplied with your headset may vary depending on your region.
Power button
Indicator light
Volume up
button
Charger jack
Volume down
button
3
Button functions
Power button
Press and hold to turn the headset on or off.
•
Talk button
Press to make or answer a call.
•
Press to end a call.
•
Press and hold to enter Pairing mode.
•
Volume up/down buttons (touch buttons)
Press to adjust the volume.
•
Press and hold both buttons at the same time to turn the indicator
•
light on or off.
Press and hold to turn the microphone on or off.
•
You can hear a beep when the volume level of the headset reaches to
•
the lowest or highest level.
Do not use the headset in humid places or with wet hands.
•
4
Charging the headset
This headset has a rechargeable internal battery which is nonremovable. Ensure that you fully charge the battery before using the
headset for the rst time.
Using the charger
1 Plug the charger into the charger jack on the headset.
2 Plug the charger into a power outlet.
During charging, the indicator light of the headset will turn red.
If charging does not begin, unplug the charger and plug it in again.
3 When the headset is fully charged, the indicator light of the headset
changes to blue. Unplug the charger from the power outlet and the
headset.
English
5
Using the leather case
1 Put the headset into place of the leather case which allows you to
charge the headset when on the move.
2 Slide right the lock key.
During charging, the indicator light of the headset will turn red.
6
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.