Take the time to read through this user’s guide before you start to use
WEP650 Bluetooth Headset.
®
Bluetooth
worldwide—Bluetooth QD ID: B014732
is a registered trademark of the Bluetooth SIG, Inc.
More information about Bluetooth is available at www.bluetooth.com.
Safety precautions
Never disassemble or modify your headset for any reason. Doing this
•
may cause the headset to malfunction or become combustible. Bring
the headset to an authorised service center to repair it or replace the
battery.
•
When using your headset while driving, follow local regulations in the
country or region you are in.
•
Avoid storage at high temperatures (above 50° C/122° F), such as in
a hot vehicle or in direct sunlight, as this can damage performance
and reduce battery life.
•
Do not expose the headset or any of its supplied parts to rain or other
liquids.
At very high volumes, prolonged listening to the headset can damage
your hearing.
2
Getting started
This section explains what to remember for the proper use of your
Bluetooth headset.
Your headset overview
Ear hook
Talk button
Earpiece
Volume up
button
Volume down
button
Make sure you have the following items with your headset :
Charger, User guide.
The items supplied with your headset may vary depending on your region.
Indicator light
Charger jack
Microphone
English
3
Button functions
Talk button
Press and hold to turn the headset on or off.
•
Press to make or answer a call.
•
Press to end a call.
•
Press and hold to enter Pairing mode
•
/ Volume up/down buttons
•
Press to adjust the volume.
Charging the headset
This headset has a rechargeable internal battery which is nonremovable. Ensure that you fully charge the battery before using the
headset for the rst time.
1 Plug the charger into the charger jack on the headset.
2 Plug the charger into a power outlet. During charging, the indicator
light will turn red.
If charging does not begin, unplug the charger and plug it in again.
4
3 When the headset is fully charged, the indicator light changes to
blue. Unplug the charger from the power outlet and the headset.
Use only a Samsung-approved charger. Unauthorized chargers may
•
cause an explosion or damage to the headset.
The battery will gradually wear out while charging or discharging
•
because it is a consumable part.
The headset is not able to operate while charging. Try connecting after
•
charging is completed.
When the battery power is low
The headset beeps and the indicator light ashes red. Recharge
the battery. If the headsets powers off during a call, the call will be
automatically transferred to the phone.
English
5
Wearing on the headset
Place the headset on your ear. Ensure to put the correct (Left, Right)
earpiece on each ear. Your headset has the E-Clip feature which keeps
the headset stable on your ear with the adjustable earpiece.
Depending on what ear you are going to wear the headset, simply adjust
the ear hook accordingly.
6
Left
Right
Using your headset
This section explains how to turn the headset on, pair and connect with
the phone, and use various functions.
Activated functions and features may differ depending on the types of
•
your phone.
Some devices, especially those that are not tested or approved by
•
Bluetooth SIG, may be incompatible with your headset.
Turning the headset on or off
To turn the headset on, press and hold the talk button until the blue
•
indicator light ashes 4 times.
To turn the headset off, press and hold the talk button until both blue
•
and red indicator lights ash.
7
English
Pairing and connecting the headset
Pairing will create a unique and encrypted wireless link between two
Bluetooth enabled devices, such as a Bluetooth phone and a Bluetooth
headset. To use the headset with other Bluetooth devices, both devices
must be paired. When trying to pair the two devices, keep the headset
and the phone reasonably close together. After pairing, you can connect
the two devices.
Pairing and connecting the headset with a phone
1 Enter Pairing mode.
Turn on the headset with pressing and holding the talk button
•
until the indicator light turns blue and stays lit after blinking.
When you turn on the headset for the rst time, it automatically
•
enters Pairing mode.
ate the Bluetooth feature on your phone and search for the
2 Activ
headset (see your phone’s user guide).
3 Select the headset (Samsung WEP650) from the list of devices found
by your phone.
4 Enter the Bluetooth PIN (0000, 4 z
headset to your phone.
8
eros) to pair and connect the
Disconnecting the headset
To disconnect the headset from your phone,
Turn off the headset
•
Use the Bluetooth menu of your phone
•
Reconnecting the headset
When the headset is paired with a phone, it will attempt to automatically
reconnect each time you turn it on.
If the headset does not attempt to automatically reconnect,
•
Press the talk button.
•
Use the Bluetooth menu of your phone
Using call functions
Making a call
Redialing the last number
Press and hold the talk button to redial the last number.
For some phones, pressing the key opens the call log list. Press the talk
button to dial the selected number.
9
English
Dialing a number by voice
Press the talk button to dial a number by voice, and say a name.
Answering a call
Press the talk button to answer a call when you hear incoming call tones.
Ending a call
Press the talk button to end a call.
Rejecting a call
Press and hold the talk button to reject a call when a call comes in.
Using options during a call
You can use the following functions to control your call during a call.
Muting the microphone
Press and hold the volume up/down buttons to turn the microphone off
so that the person with whom you are speaking cannot hear you. Press
and hold the volume up/down buttons again to turn the microphone
back on.
10
Transferring a call from the phone to the headset
Press the talk button to transfer a call from the phone to the headset.
a call on hold
Placing
Press and hold the talk button to place the current call on hold.
Answering
Press the talk button to end the rst call and answer a second call when
you hear call waiting tones.
Press and hold the talk button to place the rst call on hold and answer
a second call when you hear waiting tones.
To switch between the current call and the held call, press and hold the
talk button.
a second call
11
English
Appendix
Frequently asked questions
Will my headset
work with laptops,
PCs, and PDAs?
ill anything cause
W
interference with
my conversation
when I am using
my headset?
my headset
Will
interfere with my
car’s electronics,
radio, or
computer?
12
Your headset will work with devices that
support your headset’s Bluetooth version and
proles. For specications, see page 17.
Appliances such as cordless phones and
wireless networking equipment may cause
interference with your conversation, usually
adding a crackling noise. To reduce any
interference, keep the headset away from
other devices that use or produce radio waves.
Your headset produces signicantly less power
than a typical mobile phone. It also only
emits signals that are in compliance with the
international Bluetooth standard. Therefore,
you should not expect any interference
with standard consumer-grade electronics
equipment.
Can other
Bluetooth phone
users hear my
conversation?
sound is
The
echoing while
talking.
do I take care
How
of my headset?
headset does
The
not fully charge.
When you pair your headset to your Bluetooth
phone, you are creating a private link between
only these two Bluetooth devices. The wireless
Bluetooth technology used in your headset is
not easily monitored by third parties because
Bluetooth wireless signals are signicantly
lower in radio frequency power than those
produced by a typical mobile phone.
Adjust the speaker volume, or move to another
area and try again.
Wipe it with a soft dry cloth.
The headset and the charger may not have
been connected properly.
Separate the headset from the charger,
reconnect, and charge the headset.
English
13
Certication and Safety approvals
FCC
FCC ID: A3LWEP650
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
The device and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
Users are not permitted to make changes or modify the device in any
way.
Changes or modications not expressly approved by Samsung will void
the user's authority to operate the equipment.
14
UL certied charger
The charger for this headset has met UL 1310 safety requirements.
Please adhere to the following safety instructions per UL guide-lines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO
SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A
VERTICAL OR HORIZONTAL OR FLOOR MOUNT POSITION.
English
15
Warranty and parts replacement
Samsung warrants this product as free of defects in material, design
and workmanship for the period of one year from the original date of
purchase.(Depending on your country, the length of warranty may vary.)
If during the period of warranty this product proves defective under
normal use and service you should return the product to the retailer
from whom it was originally purchased or qualied service center. The
liability of Samsung and its appointed maintenance company is limited
to the cost of repair and/or replacement of the unit under warranty.
•
The warranty is limited to the original purchaser
•
A copy of your receipt or other proof of purchase is required for a
proper warranty service
•
The warranty is void if the serial number, date code label or product
label is removed, or if the product has been subject to physical abuse,
improper installation, modication, or repair by unauthorized third
parties
•
Specically exempt from any warranty are limited-life consumable
components such as batteries and other accessories
•
Samsung will not assume any responsibility for any loss or damage
incurred in shipping. All repair work on Samsung products by
16
unauthorized third parties voids any warranty
Specications
ItemSpecications and description
Bluetooth version2.0+EDR
Support ProleHeadset Prole, Hands-Free Prole
Operating rangeUp to 30 feet (10 meters)
Standby timeUp to 150 hours*
Talk timeUp to 6 hours*
Charging timeAppro
* Depending on the phone type and usage, the actual time may vary.
ximately 2 hours*
English
17
18
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.