Warranty and parts replacement..............................................23
Correct disposal of this product ............................................... 24
English
1
Thank you for purchasing the Samsung Bluetooth Mono
Headset WEP400. We hope you will be satisfied with its
operation.
Your headset does not have a microphone. Instead, it uses
Bone Conduction Microphone technology to convert vibrations
from your jawbone into sound. With this technology, the other
person on the phone can hear you loud and clear even if you
are in a noisy place.
Please read this user’s guide to get started, and to make the
best use of the headset’s many features.
Safety precautions
Never disassemble or modify your headset any reason.
Doing this may cause the headset to malfunction or become
combustible. Bring the headset to an authorised service
centre to repair it or replace the battery.
Driving safety
• When you are driving a car, driving is your first
responsibility.
• When using your headset while driving, follow local
regulations in the country or region you are in.
2
BEFORE USING YOUR HEADSET
Checking phone compatibility
Your headset is compatible with most Bluetooth* phones that
are compliant with Bluetooth version 1.1 or higher and support
the Headset and/or Hands-Free Profile(s). Ensure that your
phone has Bluetooth capability by visiting your phone
manufacturer’s web site.
Some devices, especially those that are not tested or
approved by Bluetooth SIG, may be incompatible with
your headset.
* Bluetooth is a radio technology developed to connect devices, such as
mobile phones and headsets, without wires or cords over a short
distance of approximately 10 metres. More information is available at
www.bluetooth.com.
English
3
Checking the accessories
Make sure you have the following items with your headset:
Charging case, Adapter, User’s Guide, 1 Rubber Spring
The items supplied with your headset may vary,
depending on your country or service provider.
Your headset overview
Rubber
spring
Volume up
Volume do wn
Earpiece
4
button
button
Indicator light
Multi-Function
button
Charging contact
Charging the headset
Your headset uses a rechargeable battery. You must charge the
battery fully before using the headset for the first time.
1
Put the headset in the supplied charging case and close the
cover.
2
Plug the adapter into the case’s charging socket.
3
Plug the adapter into the electrical outlet.
• Charge the headset until the red light on the headset
turns to blue.
• The headset will be fully charged in approximately 2
hours.
English
5
4
Remove the adapter from the case.
Do not attempt to charge the headset with anything other
than the adapter provided. Using unauthorised adapter
may damage the headset.
The headset is not able to operate while charging. Try
connecting after charging is completed.
Storage of the headset
• Always store the headset with the power off and make sure
it is safely protected.
• Avoid storage at high temperatures (above 50° C / 122° F),
such as in a hot vehicle or in direct sunlight. Storage at high
temperatures can damage performance and reduce battery
life.
• Do not expose the headset or any of its supplied parts to
rain or other liquids.
6
BASIC OPERATIONS
Turning the headset on/off
ToPress and holdYou will hear You will see
turn the
headset on
turn the
headset off
Meaning of the indicator light
LightToneStatus
Flashes in
blue every 8
seconds.
the Multi-Function
button for 4 secon ds
until you see
flashes
indicator light.
the Multi-Function
button for 4 secon ds
until you see
and red flashes
the indicator light.
Quick series of 2
tones.
(Active mode starts.)
on the
4 blue
blue
on
a tone.the indicator light
series of 2
tones.
• The headset is in Active mode.
• The headset has an active call in
progress.
• You can talk up to 4 hours.
flashes while the
power is on (see
Meaning of the
indicator light
the indicator light
stops flas hing.
English
).
*
7
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.