Samsung WA90H7000GW User Manual

WA10H7200G*
WA90H7000G*

Washing Machine

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

WA7000HG_WA10H7200GP_DC68-03133X-04_EN.indd 1 2016/1/7 15:45:24

contents

INSTALLING YOUR WASHER

10

OPERATING INSTRUCTIONS

17

WASHING A LOAD OF LAUNDRY

18

MAINTAINING YOUR WASHER

26

TROUBLESHOOTING

10 Unpacking your washer
10 Overview of your washer
11 Basic location requirements

11 Electrical
11 Grounding
11 Water
12 Drain facility
12 Flooring
12 Location considerations
12 Alcove or closet installation
13 Required dimensions for Installation

13 Important note to installer
17 Loading your washer
17 Getting started

18 Overview of the control panel

20 Child Lock [
21 Sound
21 Garment+
21 Delay End
21 Wash
21 Spin
21 Power Wash
22 Mist Shower
22 Smart Check
23 Washing clothes using the cycle selector

24 Detergent use
24 Features

26 Cleaning the exterior
26 Cleaning the interior
26 Storing your washer
26 Preserving the top cover and the front frame
27 Cleaning the filter
28 Cleaning the dispensers
29 Tub Clean

30 Check these solutions if your washer…
32 Information codes

]

30

APPENDIX

34

English - 2

WA7000HG_WA10H7200GP_DC68-03133X-04_EN.indd 2 2016/1/7 15:45:24

34 Fabric care chart
35 Cycle chart
36 Helping the environment
36 Specification

safety information

Congratulations on your new Samsung Washer. This manual contains important
information on the installation, use, and care of your appliance. Please take time
to read this manual to take full advantage of your washer’s many benefits and
features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and
situations that may occur. It is your responsibility to use common sense, caution, and care when installing,
maintaining, and operating your washer.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual mean:

Hazards or unsafe practices that may result in severe personal injury

WARNING

or death.
To reduce the risk of fire, explosion, electric shock, or personal injury

when using your washer, follow these basic safety precautions:

CAUTION

These warning icons are here to prevent injury to you and others.

Please heed them explicitly.

After reading this section, keep it in a safe place for future reference.

Read all instructions before using the appliance.

Hazards or unsafe practices that may result in minor personal injury or
property damage.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Note

English - 3

WA7000HG_WA10H7200GP_DC68-03133X-04_EN.indd 3 2016/1/7 15:45:24

safety information

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using

WARNING

your appliance, follow basic precautions, including the following:

Do not let children (or pets) play in or on your washing
machine. The washing machine door does not open easily
from the inside and children may be seriously injured if
trapped inside.

This appliance is not to be used by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.

For use in Europe: This appliance can be used by children
aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and
understand the hazards involved.

Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children without
supervision.

If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.

This appliance should be positioned so that the power plug,
the water supply taps, and the drain pipes are accessible.

For appliances with ventilation openings in the base, that a
carpet must not obstruct the openings.

The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.

CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and o by the utility.

English - 4

WA7000HG_WA10H7200GP_DC68-03133X-04_EN.indd 4 2016/1/7 15:45:24

CRITICAL INSTALLATION WARNINGS

WARNING

Plug the power cord into an AC 220-240 V / 50 Hz/wall socket rated at 15 amps or higher.
Use the socket for this appliance only. In addition, do not use an extension cord.

- Sharing a wall socket with other appliances, using a power strip, or extending the power
cord may result in electric shock or fire.

- Do not use an electric transformer. It may result in electric shock or fire.

- Ensure that the power voltage, frequency, and current match the product’s
specifications. Failing to do so may result in electric shock or fire.

Have this appliance installed by a qualified technician or service company.

- Failing to do so may result in electric shock, fire, an explosion, problems with the
product, or injury.

Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.

- Unplug the power plug and clean it with a dry cloth.

- Failing to do so may result in electric shock or fire.

Plug the power plug into the wall socket in the right direction so that the cord runs towards
the floor.

- If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or fire.

This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

- Improper grounding may result in electric shock, fire, an explosion, or problems with the
product

- Never plug the power cord into a socket that is not grounded correctly. Make sure the
socket you use is grounded in accordance with local and national codes.

Do not install this appliance near a heater or inflammable material.
Do not install this appliance in a humid, oily, or dusty location, or in a location exposed to
direct sunlight or water (rain drops).
Do not install this appliance in a location where gas may leak.

- This may result in electric shock or fire.

Plug the power plug into the wall socket firmly. Do not use a damaged power plug,
damaged power cord, or loose wall socket.

- This may result in electric shock or fire.

Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord,
insert the power cord between objects, or push the power cord into the space behind the
appliance.

- This may result in electric shock or fire.

Do not pull the power cord when unplugging the power plug.

- Unplug the power plug by holding the plug.

- Failing to do so may result in electric shock or fire.

If the power plug or power cord are damaged, contact your nearest service center.

English - 5

WA7000HG_WA10H7200GP_DC68-03133X-04_EN.indd 5 2016/1/7 15:45:24

safety information

INSTALLATION CAUTIONS

CAUTION

Position the appliance so that the power plug is easily accessible.

- Failing to do so may result in electric shock or fire due to electric leakage.

Install your appliance on a level and hard floor that can support its weight.

- Failing to do so may result in abnormal vibrations, noise, or problems with the product.

Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder/lightning storm.

- Failing to do so may result in electric shock or fire.

CRITICAL USAGE WARNINGS

WARNING

If the appliance is flooded, cut the power immediately and contact your nearest service
center.
If the appliance emits a strange noise, a burning smell, or smoke, unplug the power plug
immediately and contact your nearest service center.

- Failing to do so may result in electric shock or fire.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate the area
immediately. Do not turn any appliance or light on or o.

- Do not use a ventilating fan.

- A spark may result in an explosion or fire.

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or
other flammable or explosive substances.

- This may result in electric shock, fire, or an explosion.
Do not force the washer lid open while the washer is operating (high-temperature washing/
drying/spinning).

- Water flowing out of the washer may cause burns or cause the floor to be slippery.
This may result in injury.

- Forcing the lid open can damage the product or cause injury.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the
washer before using it.

Do not insert your hand under the washer.

- This may result in injury.

English - 6

WA7000HG_WA10H7200GP_DC68-03133X-04_EN.indd 6 2016/1/7 15:45:24

Do not touch the power plug with wet hands.

- This may result in electric shock.

Do not turn the appliance o by unplugging the power plug while the washer is in operation.

- Plugging the power plug into the wall socket again may cause a spark and result in
electric shock or fire.

Keep all packaging materials well out of the reach of children, as packaging materials can
be dangerous to children.

- If a child places a bag over its head, it may suocate.

Do not let children or infirm persons use this washer unsupervised.

- Failing to do so may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washer while it is operating.

- This may result in injury.

Do not attempt to repair, disassemble, or modify the appliance yourself.

- Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse.

- If you need to repair or reinstall the appliance, contact your nearest service center.

- Failing to do so may result in electric shock, fire, problems with the product, or injury.

If any foreign substance such as water enters the appliance in any area other than the tub,
unplug the power plug and contact your nearest service center.

- Failing to do so may result in electric shock or fire.

If the water supply hose comes loose from the faucet and floods the appliance, unplug the
power plug.

- Failing to do so may result in electric shock or fire.

USAGE CAUTIONS

CAUTION

If the washer is contaminated by a foreign substance such as detergent, dirt, food waste,
etc., unplug the power plug and clean the washer using a damp, soft cloth.

- Failing to do so may result in discoloration, deformation, damage or rust.

The clear portion of the lid can be broken by a strong impact. Take care when using the

washer.

- If the clear portion is cracked or broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the faucet
slowly.
Open the faucet slowly after a long period of non-use.

- The air pressure in the water supply hose or the water pipe may result in damage to a
part or in water leakage.

If a drain error occurs during an operation, check if there is a draining problem.

- If the washer is used when it is flooded because of a draining problem, it may result in
electric shock or fire due to electric leakage.

Do not insert your hand under the washer.

- This may result in injury.

English - 7

WA7000HG_WA10H7200GP_DC68-03133X-04_EN.indd 7 2016/1/7 15:45:24

safety information

Insert the laundry into the washer completely so that laundry does not get caught in the lid.

- If laundry gets caught in the lid, it may result in damage to the laundry or the washer, or
result in water leakage.

Ensure that the faucet is turned o when the washer is not being used.

- Ensure that the water supply hose connectors are properly tightened.

- Failing to do so may result in property damage or injury.

Open the faucet and check if the water supply hose connector is firmly tightened and that
there is no water leaking before using the product.

- If the water supply hose connectors are loose, it may result in water leakage.

Do not stand on top of the appliance or place objects (such as laundry, lighted candles,
lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

- This may result in electric shock, fire, problems with the product, or injury.

Do not operate the appliance with wet hands.

- This may result in electric shock.

Do not spray volatile material such as insecticide onto the surface of the appliance.

- As well as being harmful to humans, it may also result in electric shock, fire,or problems
with the product.

Do not place an object that generates a electromagnetic field near the washer.

- This may result in injury due to a malfunction.

Since the water drained during a high-temperature wash or drying cycle is hot, do not touch
the water.

- This may result in burns or injury.

Do not wash, spin, or dry water-proof seats, mats, or clothing*.

- Do not wash thick, hard mats even if the washer mark is on the care label.
This may result in injury or damage to the washer, walls, floor, or clothing due to
abnormal vibrations.

- Abnormal vibration may cause personal injury, damage of body, wall and bottom of
washing machine, damage of clothes and other condition.

* Items not to wash: Woolen bedding, rain covers, fishing vests, ski pants, sleeping bags,

diaper covers, sweat suits, and bicycle, motor cycle, car covers, etc.

Do not operate the washer when detergent dispenser is removed.

- This may result in electric shock or injury due to water leakage.

Do not insert your hand into the detergent dispenser after opening it.

- This may result in injury as your hand may be caught.

English - 8

WA7000HG_WA10H7200GP_DC68-03133X-04_EN.indd 8 2016/1/7 15:45:24

Do not place any non-laundry objects, such as shoes, food waste, or animals into the
washer.

- This can cause abnormal vibrations that can damage the washer, and, in the case of
pets, cause severe injury or death.

Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.

- This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams, or lotions usually found in skincare
shops or massage clinics.

- This may result in the rubber seal becoming deformed and water leakage.

Do not leave metal objects (safety pins, hair pins, etc.) or bleach in the tub for long periods
of time.

- This may cause the tub to rust.

- If rust appears on the surface of the tub, apply a neutral cleansing agent to the surface
and use a sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry
contaminated by dry cleaning detergent.

- This may result in spontaneous combustion or ignition due to heat from the oxidation of
the oil.

Do not use hot water from water cooling/heating devices.

- This may result in problems with the washer.

Do not use natural hand-washing soap in the washer.

- If it hardens and accumulates inside the washer, it may cause problems with the
product, discoloration, rust, or bad odors.

Do not wash large laundry items in the washing net.

- Failing to do so may result in injury due to abnormal vibrations.

- Place smaller items, such as lace socks and lingerie in the washing net.

Do not use hardened detergent.

- If it accumulates inside the washer, it may result in water leakage.

Do not wash throw rugs or doormats.

- If you wash throw rugs or doormats, the sand will accumulate inside the washer. It may
result in error such as no draining.

CRITICAL CLEANING INSTRUCTIONS

WARNING

Do not clean the appliance by spraying water directly onto it.
Do not use the strong acid cleaning agent.
Do not use benzene, thinner, or alcohol to clean the appliance.

- This may result in discoloration, deformation, damage, electric shock, or fire.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

- Failing to do so may result in electric shock or fire.

English - 9

WA7000HG_WA10H7200GP_DC68-03133X-04_EN.indd 9 2016/1/7 15:45:24

installing your washer

UNPACKING YOUR WASHER

Unpack your washer and inspect it for shipping damage. Make sure you have received all the items shown
below. If your washer was damaged during shipping, or you do not have all of the items, contact 1300-362­603 .

To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.

Packing materials can be dangerous to children; Keep all packing material (plastic bags, polystyrene,

WARNING

etc.) well out of children’s reach.

When unpacking the washing machine, 2 person collaboration is needed. To remove the cushion

CAUTION

bottom of the packing materials, forward dumping is strictly prohibited.

OVERVIEW OF YOUR WASHER

Drain Hose

Power Cord

Parts supplied

Hose guide User manual book Plastic zip hose tie Water intake cap

Water supply hoses

Tools needed

Control panel

Lid

Adjustable legs

Wrench Flat screwdriver Level

English - 10

WA7000HG_WA10H7200GP_DC68-03133X-04_EN.indd 10 2016/1/7 15:45:25

BASIC LOCATION REQUIREMENTS

Electrical

• 220-240 Volt 50 Hz 15 AMP fuse or circuit breaker

• Individual branch circuit serving only your Washer is recommended.

• Your Washer is equipped with a power cord.

NEVER USE AN EXTENSION CORD.

CAUTION

Grounding

ELECTRICAL GROUNDING IS REQUIRED FOR THIS APPLIANCE.

This appliance must be grounded. In the event of malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a power cord having a three-prong grounding plug for use in a
properly installed and grounded outlet.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.

An improperly connected equipment-grounding conductor can increase the risk of electrical
shock. Check with a qualified electrician or serviceman if you are not sure whether the

WARNING

appliance is properly grounded. Do not modify the plug provided with the appliance – if it
does not fit the outlet, have a proper outlet installed by a qualified electrician.

IMPORTANT SAFETY PRECAUTIONS

• To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and
grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.
70 Latest Revision and local codes and ordinances. It is the personal responsibility of the
appliance owner to provide adequate electrical service for this appliance.

NEVER CONNECT THE GROUND WIRE TO PLASTIC PLUMBING LINES, GAS LINES, OR
HOT WATER PIPES.

CAUTION

01 installing your washer

Water

To correctly fill your Washer in the proper amount of time, water pressure of 20 to 116psi (137 to
800kPa) is required.

Water pressure less than 20 psi may cause water valve failure, or may not allow the water valve
to shut o completely, or may extend the fill time beyond what your Washer controls allow,
causing your Washer to turn o. A time limit is built into the controls to prevent flooding in your
home if a hose becomes loose.

The water faucets must be within 4 feet / 122 cm of the back of your Washer to match the inlet
hoses provided with your Washer.

Accessory inlet hoses are available in various lengths up to 10 feet / 275 cm for faucets that
are further away from the back of your Washer.

To avoid the possibility of water damage:

• Have water faucets easily accessible

• Turn o faucets when the washer is not in use.

• Periodically check that there is no leakage from the water inlet hose fittings.

CHECK ALL CONNECTIONS AT THE WATER VALVE AND FAUCET FOR LEAKS.

WARNING

English - 11

WA7000HG_WA10H7200GP_DC68-03133X-04_EN.indd 11 2016/1/7 15:45:25

installing your washer

Drain facility

The recommended height of the standpipe is 39 in / 99 cm. The drain hose must be routed
through the drain hose clip to the standpipe. The standpipe must be large enough to accept the
outside diameter of the drain hose. The drain hose is attached to the washer at the factory.

Flooring

For best performance, you must install your washer on a solidly constructed floor. Wood floors
may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting
and soft tile surfaces are contributing factors to vibration which can cause your washer to move
slightly during the spin cycle.

Never install your washer on a platform or weakly supported structure.

Location considerations

Do not install your washer in areas where water may freeze, since your washer will always retain
some water in its water valve, pump, and hose areas. Frozen water can damage the belts, the
pump, hoses, and other components.

Alcove or closet installation

MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:

Sides – 1 in / 25 mm
Rear – 6 in / 152 mm

Gap between end of water valve and the wall

- Case 1. Assemble supply hose after installing : Over 3.9 in (10 cm).

- Case 2. Assemble supply hose before installing : Over 2.8 in (7cm).
If the washer and dryer are installed together, the closet front must have at least a 72 in² (465 cm²)

unobstructed air opening. Your washer alone does not require a specific air opening.

Closet Front – 2 in / 51 mm
TOP - 21 in / 533 mm

A

1 in.

(2.5 cm)

A. Recessed area
B. Side view - closet or confined area

27.0 in.

(68.6 cm)

(2.5 cm)

1 in.

English - 12

B

2 in.

(5.1 cm)

21 in.

(53.3 cm)

29.3 in

(74.4 cm)

Case 1. 3.9 in (10 cm).
Case 2. 2.8 in (7 cm).

6 in

(15.2 cm)

WA7000HG_WA10H7200GP_DC68-03133X-04_EN.indd 12 2016/1/7 15:45:25