Samsung VC-8726VT User Manual
VACUUM CLEANER
❈
Before operating this unit, please read the instructions carefully.
❈ Indoor use only.
Operating Instructions
EN
Mode d’emploi
FR
Gebruiksaanwijzing
NL
DJ68-00163D(3EA)-0.5 2/28/03 2:14 PM Page 2
1
ASSEMBLING THE CLEANER
Features may vary according to model.
▼
For storage, park the floor nozzle.
EN-1
DJ68-00163D(3EA)-0.5 2/28/03 2:14 PM Page 3
2
OPERATING THE CLEANER
2-1 POWER CORD 2-2 ON/OFF SWITCH
2-3 POWER CONTROL
NOTE
When removing the
plug from the
electrical outlet,grasp the
plug,not the cord.
MIN = For delicate fabrics, e.g. net curtains.
MAX = For hard floors and heavily soiled carpets.
• SLIDE IN THE STOP POSITION
Vacuum-cleaner switches off (standby mode)
• SLIDE TOWARDS MAX
Suction capacity increases steplessly up to max.
BODY CONTROL TYPE ONLY
HANDLE CONTROL TYPE ONLY
EN-2
DJ68-00163D(3EA)-0.5 2/28/03 2:14 PM Page 4
2-4 USING FLOOR TOOLS
The transparent tube prevents the tube and
hose from being clogged by obstacle such as
socks and cloth.
When transparent tube is clogged.
Separate the nozzle from the tube. Remove
the alien substance with a stick from it. After
cleaning it, reassemble the nozzle to the tube.
- TRANSPARENT TUBE
PARQUET SPECIALIST
CREVICE
DUSTING
UPHOLSTERY
OPTION
EN-3
DJ68-00163D(3EA)-0.5 2/28/03 2:14 PM Page 5
3
FILTER FULL INDICATOR
When the lamp is lighted,
check the grille (3-2) and intermediate filter
(3-3). And, clean those parts, according to
the following guide.
NOTE
:
Empty the dust bin before it
is full in order to maintain the
best efficiency.
OPTIONAL
You can rinse the bin with water. Do not
immerse the whole cleaner in water.
Ensure completely dry before replacing.
1 2
3 4
5
3-1 EMPYT THE DUST BIN
EN-4
DJ68-00163D(3EA)-0.5 2/28/03 2:14 PM Page 6
1 2 3
NOTE
•
A HEPA-FILTER is expendable.
•
You can buy a HEPA-FILTER as a replacement part at authorized
samsung service center.
3-2 CLEANING GLILLE
3-3 CLEANING THE HEPA FILTER
1 2 3
Wash the rubber
sealed side.
When filter is set to be
dried, make sure the
rubber sealed side down.
Make sure filter is completely dry before placing
back in the machine.
Allow 12 hours for it to dry.
EN-5
DJ68-00163D(3EA)-0.5 2/28/03 2:14 PM Page 7
4
OUTLET FILTER
PROBLEM CAUSE REMEDY 0
- IF YOU HAVE A PROBLEM
Motor dose not start. No power supply.
Thermal cut-out.
Check cable, plug and socket.
Leave to cool.
Suction force is gradually
decreasing
Nozzle, suction hose or tube
is blocked.
Romove the object.
Cord dose not rewind fully. Check that the cord is not
twisted or wound unevenly.
Pull the cord out 2-3m and
push down the cord rewind
button.
Vacuum cleaner won’t
pick up dirt
Crack or hole in hose.
Dust bin is not assembled
properly .
Check hose and replace it
if need.
Position it correctly and
lock in place.
EN-6
DJ68-00163D(3EA)-0.5 2/28/03 2:14 PM Page 8
Loading...