EN
Operating Instructions
RU
!!""##$$%%&&''(())** ++,,
--''##++..&&//$$//(())))
VACUUM CLEANER
❈
Before operating this unit, please read the instructions carefully.
❈ Indoor use only.
ASSEMBLING THE CLEANER
1
Features may vary according to model.
▼
For storage, park the floor nozzle.
EN-1
OPERATING THE CLEANER
2
2-1 POWER CORD 2-2 ON/OFF SWITCH
NOTE
When removing the
plug from the
electrical outlet,grasp the
plug,not the cord.
2-3 POWER CONTROL
MIN = For delicate fabrics, e.g. net curtains.
MAX = For hard floors and heavily soiled carpets.
• SLIDE IN THE STOP POSITION
Vacuum-cleaner switches off (standby mode)
• SLIDE TOWARDS MAX
Suction capacity increases steplessly up to max.
EN-2
BODY CONTROL TYPE ONLY
HANDLE CONTROL TYPE ONLY
2-4 USING FLOOR TOOLS
PARQUET SPECIALIST
OPTION
CREVICE
DUSTING
- TRANSPARENT TUBE
The transparent tube prevents the tube and
hose from being clogged by obstacle such as
socks and cloth.
When transparent tube is clogged.
Separate the nozzle from the tube. Remove
the alien substance with a stick from it. After
cleaning it, reassemble the nozzle to the tube.
EN-3
UPHOLSTERY
FILTER FULL INDICATOR
3
3-1 EMPYT THE DUST BIN
1 2
3 4
When the lamp is lighted,
check the grille (3-2) and intermediate filter
(3-3). And, clean those parts, according to
the following guide.
OPTIONAL
You can rinse the bin with water. Do not
5
:
NOTE
Empty the dust bin before it
is full in order to maintain the
best efficiency.
immerse the whole cleaner in water.
Ensure completely dry before replacing.
EN-4