SAMSUNG VC-8714V, VC-8715V, VC-8716VT Service Manual Disassembly & Reassembly

3

SAMSUNG ELECTRONICS CO., LTD

3-1.

Disassembly of CASE-CYCLONE ASSY

1)

Pull out CASE-CYCLONE ASSY From the body

of VACUUM CLEANER.

3) Remove CAP-COVER CYCLONE,
HOLDER-SPONGE ASSY and FILTER CYCLONE
from COVER-CYCLONE.

2) Detach COVER-CYCLONE ASSY from CASE ASSY.

4) Remove GRILLE-HEPA ASSY and
BRUSH-CYCLONE ASSY from CASE ASSY.

5) Remove HANDLE-CYCLONE UP from CASE-ASSY
and then, remove 2 screws, using (+) screwdriver
to remove HANDLE-CYCLONE LOW.

3. Disassembly and Reassembly

SAMSUNG ELECTRONICS CO., LTD

4

3-2. Disassembly of BODY-MID ASSY

1) Detach BUTTON-SWITCH and BUTTON-C/REEL
with a fiat head screw driver.

4) Remove HANDLE ASSY, HOLDER-HANDLE,
DUCT-OUTLET and PANEL-CONTROL ASSY
from BODY MID.

2) Remove GRILLE-BACK and MICRO FILTER from
the body of VACUUM CLEANER.

3) Using sharp metal, remove CAP-SCREW(4pcs) and
then, loosen 6 screws and detach BODY-MID.

3-3. Disassembly of PBA MAIN

1) Remove the connector-wires from PBA MAIN.

2) Loosen 1 screw and remove PBA-MAIN.

3) Loosen 1 screw and remove PBA-LAMP.

3. Disassembly and Reassmbly