Operating Instructions
VACUUM CLEANER
❈ Before operating this unit, please read the instructions carefully.
IMPORTANT SAFEGUARDS
▲▲
This appliance must be connected to the same mains voltage as shown on
the rating plate.
This vacuum cleaner is not suitable for removing any kind of liquid.
▲
Carpets treated with a liquid cleaner must be allowed to dry before being
cleaned with the unit.
▲
Never operate the vacuum cleaner without a dust bag.
▲
The cover cannot be closed if a dust bag is not inserted. Please do not close
forcibly.
▲
Keep children away from this vacuum cleaner. It must not be used on people
or animals.
▲▲
Never use your appliance to vacuum matches, glowing embers, or
cigarette-ends. Avoid vacuuming hard, pointed objects, since they may
damage the appliance or dust bag.
If your vacuum cleaner has a fault, please contact your electrical retailer or an
authorized service agent.
▲
If the mains cable is defective, the complete cable winder must be replaced
by a service agent.
IDENTIFICATIONS OF PARTS
HANDLE
AIR REGULATOR
TUBE
*
CYCLONE
FILTER
*
FLOOR NOZZLE
▲
Features marked with
*
BUTTON FOR
SUCTION HOSE
REMOVAL
CARRYING
HANDLE
RUG/FLOOR SELECTOR
* may vary according to model.
SUCTION HOSE
TOOL STORAGE COVER
DUST-FULLINDICATOR
CORD REWIND BUTTON
POWER CON-
TROL SWITCH
ON/OFF BUTTON
CLAMPER FOR DUST
BAG COMPARTMENT
ASSEMBLING THE VACUUM - CLEANER READY FOR USE
1) Connect the suction hose to the
suction tube.
3) Connect the nozzle to the suction tube.
2) Connect the suction tubes together
(depending on model).
*
PROTECTING THE ENVIRONMENT
▲
Once you have unpacked the unit, do not simply throw the packing into the
household waste.
▲
Take them to the appropriate collecting points for recycling.
1 2
4) Connect the body connector to the
body of the cleaner.
OPTION: Adjusting the telescopic
tube (depending on
model).