Operating Instructions
VC-6000 SERIES
VACUUM CLEANER
❈ Before operating this unit, please read the instructions carefully.
IMPORTANT SAFEGUARDS
▲
This appliance must be connected to the same main voltage as
shown on the rating plate.
▲
This vacuum cleaner is not suitable for removing any kind of liquid.
▲
Carpets treated with a liquid cleaner must be allowed to dry before
being cleaned with the unit.
▲
Never operate the vacuum cleaner without a dust bag.
▲
The cover cannot be closed if a dust bag is inserted. Please do not
close forcibly.
▲
Keep children away from this vacuum cleaner. It must not be used
on people or animals.
▲
Never use your appliance to vacuum matches, glowing embers, or
cigarette-ends. Avoid vacuuming hard, pointed objects, since they
may damage the appliance or dust bag.
▲▲
If your vacuum cleaner has a fault, please contact your electrical
retailer or an auth-orized service agent.
If the main cable is defective, the complete cable winder must be
replaced by a service agent.
PROTECTING THE ENVIRONMENT
▲
Once you have unpacked the unit, do not simply throw the packing
into the household waste.
▲
Take them to the appropriate collecting points for recycling.
1
HANDLE
AIR REGULATOR
IDENTIFICATIONS OF PARTS
SUCTION HOSE
TUBE*
BUTTON FOR SUCTION
HOSE REMOVAL
FLOOR NOZZLE*
▲
Features marked with *may vary according to model.
CYCLONE
FILTER*
CARRYING
HANDLE
RUG/FLOOR
SELECTOR
DUST-FULLINDICAT OR
CORD REWIND BUTTON
POWER CONTROL SWITCH*
ON/OFF BUTTON
CLAMPER FOR DUST BAG
COMPARTMENT
ASSEMBLING THE VACUUM - CLEANER READY FOR USE
1)
Connect the suction hose to the cyclone filter. 2) Connect the cyclone filter to the suction tube.
3) Connect the suction tubes together (depending
on model).
4) Connect the nozzle to the suction tube.
OPTION : Adjusting the telescopic
tube(depending on model).
5) Connect the body connector to the body of the
cleaner.
2