Please read the safety instructions below before installing and using the product.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure
reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be
blocked or covered.
‐ Do not cover the slots and openings with a cloth or other materials.
‐ Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
‐ Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation
is provided.
• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
• Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric
shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an
authorized dealer immediately.
• Make sure to pull out the power cord from the outlet before cleaning.
• This apparatus use batteries. In your community, there might be regulations that require you to dispose of these
batteries properly to protect the environment. Please contact your local authorities for disposal or recycling
information.
• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric
shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at the plug end, where connected to adaptors, and at the point where
they exit from the apparatus.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to
lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC
adaptor corresponds to the local electrical supply (depending on the model).
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol indicates that important
literature concerning operation and
maintenance has been included with this
product.
• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the power
cord from the outlet. Do not touch the power cord with wet hands.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an
extended period of time (especially when children, elderly, or disabled people will be left alone in the house).
‐ Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate
sparks and heat, or cause the insulation to deteriorate.
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low
temperatures, high humidity, chemical substances or where it will operate for 24 hours a day such as in an airport, a train
station, etc. Failure to do so may cause serious damage to your set.
• Use only a properly grounded plug and receptacle.
‐ An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power
plug should be readily accessible at all times.
• Do not allow children to hang on the product.
• Store the accessories (batteries, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to
vibration.
• Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a
service center.
• To clean the product, unplug the power cord from the power outlet and wipe the product using a soft cloth dipped
in a small amount of water. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air
freshener, lubricant or detergent. These chemicals candamage the appearance or erase the printing on the product.
• Do not expose the apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or overheat the batteries.
• There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same
or equivalent type.
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM
THIS PRODUCT AT ALL TIMES.
A detailed User’s Manual is built into your TV. For more information about how to view this e-Manual, see page 11.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearances. Product design and specifications may be changed without notice.
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, the panorama
or 4:3 image format, stock or news bars at the screen bottom etc.) on the screen. Displaying still images for long
periods of time can cause image burn-in, which will affect image quality. To reduce risk of this effect, follow the
recommendations below:
• Avoid displaying the same TV channel for long periods.
• Try to display images in full screen mode. Use the TV's picture format menu or the remote's P.Size button to adjust
the size of the picture so that images fill the screen.
• Reduce brightness and contrast values to the minimum required to achieve desired picture quality. Exceeding these
values may speed up the burn-in process.
• Frequently use all TV features designed to reduce image retention and screen burn-in. Refer to the proper section of
the e-manual for details.
Providing Proper Ventilation for Your TV
When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls, cabinet sides,
etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product
caused by an increase in its internal temperature.
✎
Whether you install your TV using a stand or a wall-mount, use parts provided by Samsung Electronics only.
• If you use parts provided by another manufacturer, it may cause difficulties with the product or result in injury
caused by the product falling.
Installation with a stand.Installation with a wall-mount.
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
List of Features
• Media Play: Media Play lets you access, view, or play photos, videos, or music located on USB devices, digital
cameras, cell phones, and PCs.
• e-Manual: Provides a detailed, on-screen user's manual built into your TV. See page 11.
Connect your TV to an antenna or cable connection, and then connect your peripherals. When done, connect the
power cord to the TV, and then connect the power cord to an AC wall outlet. If you are connecting your TV to a cable
or satellite box using HDMI, Component, or Composite connections, you do not need to connect the ANT IN jack to an
antenna or a cable connection.
• For the best picture and audio quality, connect digital devices using an HDMI cable.
• If you connect an external device to the TV that uses an older version of HDMI, the video and audio may not work. If this occurs,
ask the manufacturer of the device about the HDMI version and, if it is out of date, request an upgrade.
• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
• PC/DVI AUDIO IN input is not supported.
• For a set-top box connection using an HDMI cable, we highly recommend you connect the cable to the HDMI IN 1(STB) port.
• For an HDMI to DVI cable connection, you must use the HDMI IN 2(DVI) jack.
• If you connect a device to the HDMI IN 2(DVI) port using an HDMI to DVI cable, the audio will not work. DVI does not transmit
audio. You must add a separate audio connection.
• For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to the HDMI IN 2(DVI) jack on the
TV. Use the PC's speakers for audio.
PC connection
(Using an HDMI (to DVI) Cable)
USB connection
The TV does not support HDDs
(Hard Disk Drives) connected to
the USB port.
HDMI OUT
HDMI connection
Set-top box / Blu-ray player
DVI OUT
TV Side Panel
Component connection
Blu-ray player / DVD
COMPONENT OUT
PR PB Y
RBRG
RBRG
AUDIO OUT
R-AUDIO-L
WR
RW
AV connection
VIDEO OUT
Y
Y
VCR
AUDIO OUT
R-AUDIO-L
WR
RW
VHF/UHF
Antenna
Cable
or
Amplifier /
DVD home theater
RW
AUDIO IN
R-AUDIO-L
OPTICAL
Audio connection
Digital Audio System
TV Rear Panel
✎
The position of the port may
differ depending on the model.
✎
Using two-way radio mobile or portable
units, amateur radio, or AM radio near
your TV may cause the TV to malfunction.
If you have attached your TV to a PC (or other external device) through an HDMI port, you can select one of the
standard resolutions listed in the Resolution column for your PC's video output. The TV will automatically adjust to
the resolution you choose. However, we recommend setting your PC (or other external device) to the TV's optimal
resolution. The optimal resolution for Series 4 TVs is 1024 x 768@60Hz. The optimal resolution for Series 5 TVs is 1920 x
1080@60 Hz.
ModeResolution
IBM 720 x 40031,469 70,087 28,322 -/+
640 x 48035,000 66,667 30,240 -/-
MAC
VESA
DMT
✎
The interlaced mode is not supported.
✎
The TV might operate abnormally if you select a non-standard video format.
This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually
impaired persons.
Press to display and select the available
video sources.
Turns the TV on and off.
Press to directly access to channels.
Turn on the backlight for the buttons.
When on, the buttons become
illuminated for a moment when
pressed. (Using the remote control
with this button set to On will reduce
the battery usage time.)
Press to select additional digital
channels being broadcasted by the
same station. For example, to select
channel ‘54-3’, press ‘54’, then press
‘-’ and ‘3’.
Adjusts the volume.
Displays the channel list on the screen.
View Media Play.
Quickly select frequently used
functions.
Moves the cursor, selects the on-
screen menu items, and changes the
values seen on the menu.
Press to return to the previous menu.
E-MANUAL: Displays the e-Manual.
P.SIZE: Lets you choose the picture
size.
CC: Controls the caption
decoder.
MEDIA.P
SLEEP
Return to the previous channel.
Cut off the sound temporarily.
Change channels.
Displays the main on-screen menu.
Automatically shuts off the TV at a
preset time.
Displays information on the TV screen.
Exit the menu.
Use these buttons according to the
directions on screen.
Use these buttons when using a
specific feature.
Installing the Batteries Into the Remote
Installing batteries (Battery size: AAA)
✎
NOTE
• Install the batteries so that the polarity of the batteries (+/-)
matches the illustration in the battery compartment.
• Use the remote control within 23 feet of the TV.
• Bright light may affect the performance of the remote
control. Avoid using when near fluorescent lights or neon
signs.
• The color and shape may vary depending on the model.