Samsung UN65HU9000FXZA, UN55HU9000FXZA Installation Guide

Unpack

Taking the TV Out of the Box

• Warning:

Do not touch the TV’s screen when you take it out of the box. Hold it by its edges only. If you touch the screen, you can cause the TV panel to crack.

• Recommendation 1:

Two people should remove the TV from the box as shown above. When removing the TV, hold it by its edges only. Do not touch the screen.

• Recommendation 2:

If only one person is available to remove the TV from the box, remove it as shown in the illustration above. Hold the TV by its edges. Do not touch the screen.

Included in this Box

Remote Control

MIC

KEYPAD

SOURCE

VOL

VOICE

GUIDE

RETURN

CH.LIST

EXIT

SMART HUB

3D CC P.SIZEMTS

INFO

Samsung

Smart

Remote

Control

Batteries

(2 AA, 2 AAA)

Control

Stand part

Base Stand Mount Screws (x8)

Also included

• User manual • Regulatory guide • 3D Active Glasses

One connect and Cables

One connect One connect

IR Extender

Cable

Wall Mount Adapter

(55 inches models: 2 pieces)

cable

Power Cord

RCA Adapter

AUDIO OUT

COMPONENT IN

AV IN 1 Adapter

Wall Mount Adapter

(55 inches models: 2 pieces 65 inches models: 4 pieces)

[HU9000-QSG]BN68-05947A-03ENG.indb 1 2014-09-30  2:36:34

Warnning

Do not remove the Styrofoam on the front of TV screen.

Assemble

x 8

1 Locate the Base, Stand Mount, and

Screws in the box and set them aside.

Remove the top portion of the

✎

box to locate the stand parts.

3 Place the TV on a soft surface,

screen side down. Use the Styrofoam to protect the screen.

[HU9000-QSG]BN68-05947A-03ENG.indb 2 2014-09-30  2:36:36

2 With another person, hold the TV

by its edges, and then remove it completely from the box.

4 Fit the Base and Stand Mount

together, making sure the notch on the Stand Mount aligns with the Base.

x4 (M4 X L12)

6-26-1

5 Insert 4 screws, and then use a

screwdriver to secure the Base to the Stand Mount.

x4 (M4 X L12)

7 Insert 4 screws, and then use a

screwdriver to secure the stand to the TV.

To assemble the wall mount, use

✎

the styrofoam that came with the TV’s packaging to protect it. Lay the TV down and attach the screws.

6 Holding the stand parallel to the

screen, slide the Mount into the notches on the back of the TV.

8 After attaching the stand, set the

TV upright, and then remove the Styrofoam from the front of the TV. Do not place the TV at the edge of any piece of furniture (table, entertainment center, etc.). It could fall and break or cause personal injury.

[HU9000-QSG]BN68-05947A-03ENG.indb 3 2014-09-30  2:36:39

Connecting the TV to the One Connect

You must connect the One Connect to the TV via the One Connect cable before connecting any external devices. The One Connect cable has two different ends. Connect the end marked TV to the TV and the other end to the One Connect.

One Connect

The One Connect serves as the connection panel for your TV. You connect nearly all external devices to the One Connect.

[HU9000-QSG]BN68-05947A-03ENG.indb 4 2014-09-30  2:36:40

+ 8 hidden pages