Samsung UN55HU7250 User Manual

user manual

Thank you for purchasing this Samsung product. To receive more complete service, please register

your product at

www.samsung.com/register

Model _______ Serial No. ___________________

If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance. * This Nanum Gothic Eco font is provided by NAVER.

Warning! Important Safety Instructions

(Please read the Safety Instructions before using your TV.)

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that important literature concerning operation and maintenance has been included with this product.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

‐ Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper

ventilation is provided.

‐ Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct

sunlight.

‐ Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or

electric shock.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.

• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.

• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where they exit from the appliance.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

English - 2

• Make sure to plug the power cord in until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center.

• Be sure to pull the power plug out of the outlet if the T V is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).

‐ Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord

to generate sparks and heat or the insulation to deteriorate.

• Be sure to contact an authorized service center for information if you intend to install your TV in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failing to do so may lead to serious damage to your TV.

• Use only a properly grounded plug and wall outlet.

‐ An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.

• Do not allow children to hang onto the product.

• Store the accessories (battery, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.

• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service center.

• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the T V or erase the printing on the product.

• Do not expose this apparatus to dripping or splashing.

• Do not dispose of batteries in a fire.

• Do not short-circuit, disassemble, or overheat the batteries.

• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

• This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.

• Use care when touching the T V after it has been on for some time. Some parts can be warm to the touch.

English - 3

Internet Security

Samsung takes a number of steps to protect its Internet-compatible Smart TVs against unauthorized incursions and hacking. For example, certain sensitive communications between the TV and the Internet servers are encrypted. In addition, the TV’s operating system has adopted controls to prevent the installation of unauthorized applications.

Although we take steps to protect your SmartTV and information, no Internet-connected device or transmission is completely secure. We therefore encourage you to take additional steps to safeguard your TV, secure your Internet connection, and minimize the risk of unauthorized access. These steps are listed below:

• When Samsung releases software updates to improve the security on your TV, you should promptly install these updates. To automatically receive these updates, turn on “Auto Update” in the T V ’s menu (Support > Software Update > Auto Update). When an update is available, a popup message appears on the TV screen. Accept the software download and update by selecting YES when prompted. Take steps to secure your wireless router and network. Your router’s manual should provide additional details about how to implement the following measures:

• Secure your wireless router’s management settings with a unique password to prevent unauthorized changes to security related settings.

• Implement standard encryption (e.g., WPA2 encryption) on your wireless router to secure your wireless network signal.

• Secure access to your wireless network with a hard-to-guess password.

• Confirm your router’s firewall setting is enabled (if so equipped).

• Make sure all your Internet connected devices are behind your network’s firewall.

• If your router or modem has a standby mode button, use it to disconnect your home network from the Internet when it is not in use.

• Use strong passwords for all your Internet accounts (Netflix, Facebook, Skype, etc.). If your TV has a camera, recess the camera into the TV’s bezel when it is not in use. Recessing the camera makes it inoperative.

• If any unexpected messages appear on your TV screen requesting permission to link a device or enable a remote session, do NOT accept.

• Do not visit suspicious web sites and do not install any suspicious programs. We recommend users install only those authorized apps provided by Samsung through Samsung Smart Hub.

English - 4

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and specifications may change without notice.

Features of your new TV

SMART HUB

Your TV features Smart Hub, a multi-purpose entertainment and family center. With Smart Hub, you can surf the web, download applications, and stay in touch with family and friends through social networking services. In addition, you can view or play photo, video, and music files stored on external storage devices.

Press the Choose a service using the icons displayed in the top part of the screen.

Smart Hub services and functionality include:

Games: You can view all game apps provided by Smart Hub and download and play games you select.

SAMSUNG APPS: Samsung Apps offers an extensive collection of free and for-pay news, sports, weather,

and gaming content you can download directly to and enjoy on your TV.

On TV: View a listing of programs that are currently airing or are scheduled to air. Select a program to watch.

MOVIES & TV SHOWS: Purchase and stream movies and series directly from the Internet.

MULTIMEDIA: Play back photo, video, and music files from an external storage device.

button to open the First Screen, and select the Panel icon. You will move to the Panel screen.

Anynet+ (HDMI-CEC)

Lets you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

e-Manual

Provides a detailed, on-screen user's manual built into your TV (page 20).

SMART Interaction

Access and control menu options and functions using motions. To use Smart Interaction, connect the SMART TV camera (sold separately) to the TV.

Device Manager

Use the TV features with a USB or Bluetooth keyboard and mouse.

MHL & Screen Mirroring

Displays mobile device screens on the TV using a wired or wireless connection.

English - 5

Contents

01. Turning on the TV and Cabling

7 Turning on and Controlling the TV

7 Matching Cable Plugs to Cable Ports

8 Upgrading the TV using a UHD

Evolution Kit (sold separately)

02. Using the Samsung Smart Control

9 Buttons and Functions

14 Switching Between Video Sources

14 Using the Remote Control to Control

External Devices

14 Connecting the IR Extender Cable

15 Setting Up the Universal Remote

Control

05. Troubleshooting and Maintenance

22 Troubleshooting

24 Network Troubleshooting

27 Eco Sensor and Screen Brightness

28 Getting Remote Support

28 Caring for the TV

06. Specifications, wall mounting, and other information

29 Specifications

30 Dimensions

31 Licenses

32 Mounting the TV on a Wall Using the

Wall Mount Kit (Optional)

03. Smart Hub

04. Using the e-Manual

20 Launching the e-Manual

20 Additional e-Manual Features

21 Updating the e-Manual to the Latest

Version

33 Providing Proper Ventilation for Your

34 Securing the TV to the Wall

35 Warranty Information

36 SAMSUNG BRAND PRODUCTS

English - 6

01. Turning on the TV and Cabling

Turning on and Controlling the TV

You can turn on the TV using the Samsung Smart Control or the TV’s Controller, a small joystick-like button on the back of the TV in its lower-left corner. You can also use the TV's Controller to operate the TV without the Samsung Smart Control.

Open Smart Hub.

Open the menu.

The control stick is located on the

lower-left corner of the back of the TV.

Remote control sensor

When you use the Samsung Smart Control, the standby LED does not light, except when you

press the

button.

Turn off the TV.

TV Controller

Select a source.

Matching Cable Plugs to Cable Ports

Make sure you have the correct cable before plugging it in. Illustrations of common plugs and ports are shown below.

HDMI

USB

Optical

Cable Plugs Ports

Warning

English - 7

Do not plug cables in upside down. Be sure to check the orientation of the plug before plugging it in.

Upgrading the TV using a UHD Evolution Kit (sold separately)

No need to buy a new TV. Connecting UHD Evolution Kit (sold separately) to a Samsung TV will allow you to enjoy the latest features and content without having to purchase a new TV. Experience the latest features and services offered by Samsung Electronics via UHD Evolution Kit.

‐ If you connect a One Connect that did not come with your Samsung Smart T V model, the One Connect

will not work.

UHD Evolution Kit

(sold separately)

‐ The TV stand type

depends on the model.

UHD Evolution Kit is sold separately. Purchasing a UHD Evolution Kit allows you to upgrade the UHD Evolution Kit’s software to the version from the year in which your UHD Evolution Kit was released. Not supported on all models.

English - 8

02. Using the Samsung Smart Control

Buttons and Functions

Microphone: Use the microphone with the Voice Control

and Voice functions.

MUTE: Cuts off the sound temporarily.

MIC

KEYPAD

VOL

VOICE

SOURCE

‐The Voice Control function can be affected by

unclear pronunciation, voice level, or surrounding noise.

Turns the TV on and off.

SEARCH: Launches the Search function. KEYPAD: Displays the On-Screen Remote. See the e-Manual chapter, Using the Remote Control and Peripherals > Using the Samsung Smart Control > Displaying and Using the On-Screen Remote. SOURCE: Displays and lets you select video sources. VOICE: Takes your voice commands and lets you enter

text using your voice.

Changes channels.

Adjusts the volume.

Touch pad Place a finger on the touch pad and move the Samsung Smart Control. The pointer on the screen moves in the direction you moved the Samsung Smart Control.

RETURN EXIT

SMART HUB

GUIDE

CH.LIST

Press the touch pad to run the focused item. Press and hold the touch pad to display the ContextSensitive Menus.

P.SIZE CC INFOMTS

< > ¡ £

menu items, and changes the values seen on the TV's menu.

M.SCREEN

: Moves the cursor, selects the on-screen

RETURN: Returns to the previous menu. SMART HUB: Brings up Smart Hub applications. See the

e-Manual chapter, Smart Features > Smart Hub.

‐ To exit an application quickly, press the

GUIDE: Displays the EPG (Electronic Program Guide).

Use these buttons with a specific feature and according to the directions on the TV's screen.

MENU: Displays the menu on the screen. M.SCREEN: You can split the TV screen and enjoy multiple activities - such as watching TV,

surfing the web, and watching a video - all at the same time.

button.

P.SIZE: Lets you choose the picture size. MTS: Press to choose stereo, mono, or Separate Audio Program (SAP broadcast). CC: Controls the caption decoder and displays captions on the screen. INFO: Displays information on the TV screen.

English - 9

Installing Batteries into the Samsung Smart Control

To use the Samsung Smart Control, insert the batteries into the device referring to the figure below.

Gently pull on the battery cover's notch, and then remove the cover completely once it comes loose.

Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly.

Place the battery cover on the remote control and insert the top part of the cover into the remote control.

Press the catches on both sides of the battery cover in the order shown by the figure so that the cover is completely attached to the remote control.

Using the Samsung Smart Control Motion Function to Operate the TV

The Samsung Smart Control has a motion sensor (gyro sensor) that lets you control the TV easily by moving the Samsung Smart Control and using it much like a cordless mouse.

Place a finger on the Samsung Smart Control's touch pad, and then move the Samsung Smart Control. A pointer appears on the screen. Move the Samsung Smart Control, and the pointer moves on the screen in the direction you moved the Samsung Smart Control and the same distance. Highlight an item on the screen with the pointer, and then press the touch pad to select it.

You can also move the Samsung Smart Control in the same fashion to scroll scrollable screens up and down.

‐ If you remove your finger from the touch pad, even momentarily, the Motion Function stops. To re-start

the function, put your finger on the touch pad again, and then move the Samsung Smart Control.

‐If Voice Guide is set to On, the Samsung Smart Control's motion sensor does not work. For the motion

sensor in the Samsung Smart Control to work, you must set Voice Guide to Off.

English - 10

Using the Touch Pad and the Directional Buttons

‐ In the TV's menu, navigate to Support > Smart Control Tutorial to view a tutorial that shows how to use

the touch pad.

‐ If the touch pad's sensitivity is too high or low, navigate to the System > Smart Control Settings menu, and

then select the Touch Sensitivity option to change the touch pad sensitivity.

Moving the Focus or Pointer Entering the Menu / Selecting an Item

Press the directional buttons (up, down, left, and right) to move the focus, pointer, or cursor in the direction you want.

Displaying Context-sensitive Menus in

To enter a menu or select an item, highlight the item or the menu title, or move the pointer over it, and then press the touch pad.

Changing the Smart Hub Panel

Smart Hub

In Smart Hub, highlight an item, and then press and hold the touch pad. The context-sensitive menu for the item pops up.

‐ The context-sensitive menu may vary

depending on the item you selected.

On a Smart Hub panel, drag left or right on the touch pad. The previous or next Smart Hub panel appears.

Scrolling on the Web Browser Loading the CH List

When you are using the web browser, drag up/ down or left/right on the touch pad to scroll the web screen.

English - 11

Press and hold the touch pad while watching TV. To launch the CH List.

Reconnecting the Samsung Smart Control to the TV

If the Samsung Smart Control stops operating or works abnormally, try replacing the batteries. If the problem persists, pair the Samsung Smart Control and TV again.

Move to within a foot of the TV, and then aim the Samsung Smart Control at the TV's remote control sensor.

Remote Control Sensor

Press the RETURN button and GUIDE button simultaneously for 3 seconds or more.

The connecting icon appears on the screen. A few moments later, the connected icon appears. The Samsung Smart Control is paired to the TV.

The Low Battery Alarm Window

If the Samsung Smart Control's batteries become low, the Low Battery Alarm appears on the screen. When the Alarm appears, replace the batteries. We recommend using alkaline batteries for longer operating life.

English - 12

Displaying and Using the On-Screen Remote

Press the KEYPAD button on the Samsung Smart Control to display the On-Screen Remote on the TV's screen. Use the On-Screen Remote to enter numbers, control content playback, and use the features and functions of the TV, just like a real remote. Use the directional buttons on the Samsung Smart Control to move the cursor on the On-Screen Remote. Press the touch pad on the Samsung Smart Control to select.

‐ The On-Screen Remote buttons may vary depending on the TV features or functions you are using.

Button Description

Lets you switch channels by entering channel numbers directly. Select Pre-CH to return to the previous channel.

Controls the playback of video, photo, or music files from all sources, and the playback of media content on external devices (for example, a Blu-ray player).

a, b, {, }

TOOLS

INFO

Speaker Settings

PIP

Multi-Link Screen

P.Size

SLEEP

P.Mode

Web Browser

e-Manual

Use these colored buttons to access additional options specific to the feature in use. Press to display the Tools menu while you are watching TV. The Tools menu gives you easy access to frequently used functions. The functions listed are contextsensitive and vary depending on how you are currently using the TV. Shows information about the current digital broadcast program or content. Displays the TV's menu on the screen. Lets you select the speakers which will play the TV's audio. You must connect a home theater or amplifier with external speakers to the TV to use this function. Lets you display video from an external device or computer on the main screen and a TV broadcast in a picture-in-picture window. Lets you split the TV screen and use multiple functions - such as watching TV, surfing the web, and playing a video - at the same time. Select to turn subtitles on or off. Changes the picture size. This function automatically shuts off the TV after a preset period of time. Lets you select the Picture Mode. Launches the Web Browser. Opens the e-manual. Select to log in to or out of your Samsung account.

Move to the right / Move to the left: Moves the Onscreen Remote on the screen.

Large size / Normal size: Resizes the Onscreen Remote on the screen.

‐ Alternatively, navigate to the System > Smart Control Settings menu and select

and set the Onscreen Remote Size option.

Motion Sensitivity: Put a finger on the touchpad and move it to adjust the speed of the pointer on the screen.

‐ Navigate to System > Smart Control Settings, and select Motion Sensitivity to

enable this option.

Touch Sensitivity: Lets you change the touch pad sensitivity.

‐ Alternatively, navigate to the System > Smart Control Settings menu and select

and set the Touch Sensitivity option.

Universal Remote Setup: Displays the Universal Remote Setup screen.

Cancel: Select to close a pop up menu.

English - 13

Switching Between Video Sources

Press the SOURCE button to switch between external devices connected to the TV. For example, to switch to a game console connected to the second HDMI connector, press the SOURCE button. The Source List appears across the top of the screen. From the Source list, select HDMI2.

‐ The connector names may vary depending on the product.

Using the Remote Control to Control External Devices

MENU > System > Universal Remote Setup

The universal remote control feature lets you control cable boxes, Blu-ray players, home theaters, and other third-party external devices connected to the TV using the TV's remote control. For each external device you want to control, you must run the universal remote set up process. The first step in the process is connecting the IR extender cable (included) to the TV and positioning the transmitter end of the cable in front of the device you want to control.

‐ You can also use the Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's

remote control without any additional setup.

Connecting the IR Extender Cable

‐ The color and design of the IR extender cable may vary depending on the model.

4 inches

To begin the universal remote set up process, connect the IR extender cable (included) to the TV's IR output connector as shown in the diagram, and then position the transmitter end within 4 inches (10 cm) of the external device's remote control sensor, pointing in the direction of the sensor.

There can be no obstacles between the transmitter end of the IR extender cable and the external device. Any obstacles will interfere with the transmission of the remote control signals.

English - 14

Setting Up the Universal Remote Control

‐ If you want to control a set-top-box, you need to have your zip code and your cable provider's name and

location on hand before you begin. If you want to control a Blu-ray player or home theater, you need the manufacturer's name and model number.

Turn on the external device you want to control with the universal remote function.

Press the SOURCE button on your remote to bring up the Source screen.

Select the Universal Remote Setup icon.

‐ You can also start Universal Remote Setup through the TV's menu. Navigate to System > Universal

Remote Setup.

The TV checks if the IR extender cable is connected. If it confirms the connection, press the touch pad.

Select the type of device you want to control - set-top-box, Blu-ray player, or home theater.

Follow the directions on the screen to complete the set up and register the device. The directions will be different, depending on the device you want to control.

Once set up is complete and you have confirmed that you can use the TV remote to control the device, disconnect the IR extender cable from the TV and set it aside. You can now control the device directly with your remote.

Controlling an External Device with the TV Remote

During the universal remote set up process, the TV registers the connector (source) the external device is connected to. To control a registered external device with your TV's remote, select the external device on the Source List.

Press the SOURCE button on your remote.

Select the source the device is connected to (HDMI1, HDMI2, etc.)

Control the device with the remote. For example, if the device is a set-top-box, press the channel buttons on the remote to change the channel.

For information on additional functions, see "Controlling External Devices with the TV Remote - Using the Universal Remote" in the e-Manual.

English - 15

03. Smart Hub

Smart Hub is the control center of the TV. Through Smart Hub you can view TV program schedules and select shows to watch, download and install apps and games, select and stream movies and TV shows, and playback photo, video, and music files located on Blu-ray players, USB devices, smart phones and tablets, your computer, and the Internet.

Smart Hub has five main panels: Games, SAMSUNG APPS, On TV, MOVIES & TV SHOWS, and MULTIMEDIA.

To move from panel to panel, select one of the icons at the top of the screen. You can also swipe left or right across the touch pad to display the previous or next panel. Each panel gives you access to additional screens. To open the additional screens, select items on the panel or select an icon or hotspot on the screen.

‐ The TV must be connected to the Internet to access Smart Hub.

Games Panel

The Games panel displays games you can download to and play on your TV. You can also update or delete downloaded games. The Games panel has two sub-panels: All Games and My Page. All Games displays all the games available through Smart Hub. My Page displays the games you have downloaded. Most games listed on the Games panel are free, while some require a fee. To download a for-pay game, you must have a Samsung Account with a registered credit card.

Basic Games Panel Functions

In the My Page or All Games panel, move the focus to a game, and then press and hold the touch pad. An Options drop down list appears with the following functions.

• Download/Delete: Downloads games to the TV or removes games from the TV.

• View detail: Displays detailed information about the selected game.

Quickly Downloading and Installing a Game

Select a game, and then press and hold the touch pad. When the Options drop down list appears, select Download from the list. If the game is free, the game you selected is installed on the TV. If the game is not free, follow the directions on the screen to pay for and download the game.

SAMSUNG APPS Panel

The SAMSUNG APPS panel displays a variety of free and for pay news, sports, weather, and gaming apps.

The Samsung Apps panel has a number of sub-panels including Most Popular, What's new, and Categories. Default apps install automatically when Smart Hub is first launched. The default apps may differ depending on your region. Most apps listed on the SAMSUNG APPS panel are free, but some apps require a fee. To download these, you must have a Samsung Account with a registered credit card.

English - 16

SAMSUNG APPS Panel Functions

Move the focus to an app, and then press and hold the touch pad. An Options drop down list appears with the following functions.

• Move: Relocates an app on the screen.

• Delete: Removes a selected app from your TV.

• Multi Delete: Removes multiple apps from the TV.

• View Details: Displays detailed information about a selected app.

• Change View: Changes how the apps are sorted on the screen, by Custom view or Most Played.

• Lock/Unlock: Locks or unlocks apps. Locked apps cannot be accessed.

• Update Apps: Displays a list of apps that have updates available. You can select which apps to update.

The SAMSUNG APPS Panel functions are context-sensitive. The functions that appear may differ depending on the app you select.

Downloading and Installing an App

On the SAMSUNG APPS panel, select Most Popular, What's new, or Categories.

Move the focus to an app, and then press and hold the touch pad. When the Options drop down list appears, select Download from the list. If the app is free, the app you selected is installed on the TV. If the app is not free, follow the directions on the screen to pay for and download the app.

On TV Panel

On TV displays your current program live in a small window, a list of recommended programs currently on

other channels, and a list of recommended programs that will air later. Use these lists to change the channel, view more information about recommended programs running later, including how much time is left until they air. You can also set up a Schedule Viewing of a program that hasn’t aired yet.

To view a program recommended by On TV, select the image.

The On TV panel has the following main subpanels:

• Guide: Displays the program schedule of each digital channel. You can check the program schedule and

set up a Schedule Viewing.

• Timeline View: Displays program recommendations for different times of the day.

• Trending: Displays what is the most trendy or popular content on Twitter, You can set up a Schedule

Viewing to view.

On TV Panel Functions

Move the focus to a program, and then press and hold the touch pad. An Options drop down list appears with the following functions.

• View details: Displays detailed information about the selected program.

• Schedule: Sets up a Schedule for the selected program.

English - 17

MOVIES & TV SHOWS Panel

Buy or rent movies and TV shows online and stream them to your TV using apps downloaded via Smart Hub. This is called Video on Demand (VOD). The MOVIES & TV SHOWS screen displays recommended movies and TV shows and displays multiple VOD content sources so you can browse and watch all more easily.

The MOVIES & TV SHOWS panel has the following main subpanels:

• Featured: View movies or TV programs grouped according to various themes, such as movies with a

specific actor or an actor who acted in a TV series, etc.

• Movies: View movies by release date, popularity, or genre.

• TV Shows: Search TV shows by air date, popularity, or genre.

• Tra ilers: View movie trailers for upcoming movies.

• Trending: View movies and TV programs that are the most trendy or popular on Twitter.

Basic MOVIES & TV SHOWS Panel Functions

Move the focus to a movie or TV program, and then press and hold the touch pad. An Options drop down list appears with the following functions.

• Play Content Now: Displays the names of one or more content providers. Select a content provider to play

the selected movie or TV program immediately. If the app for the content provider you selected is not installed on the T V, a pop-up window appears. In the pop-up window, select either to display the app’s information page or to install the app immediately. Note that you can also install the app from the app’s information page.

MULTIMEDIA

The MULTIMEDIA Panel lets you play media content saved on USB devices, smartphones, cameras, computers, or in storage services. The MULTIMEDIA Panel has three main subpanels: USB Drive, Network Device, and Storage Service. USB Drive displays USB devices connected to the TV. Network Device displays devices connected to your TV through your home network (a computer, a smart phone, etc.). Storage Service displays services such as Dropbox and SkyDrive linked via your Samsung account to the TV.

English - 18

Allowing Connections with a Computer or Mobile Device

To play multimedia content located on a computer or mobile device on the TV, you need to:

Establish the connection to the computer or device.

Allow the connection with the computer/mobile device on the TV.

For information about establishing connections, see the “Connect to a PC” and “Connect to a Phone” sections of the e-Manual.

To allow a connection with a computer or mobile device, follow these steps:

Select Network Device in the MULTIMEDIA panel. The devices connected to the TV are listed.

Select Options > Multimedia device settings. The devices connected to the TV are listed.

• Alternatively, select Multimedia Device Settings from the Network menu to see the list of the devices

connected to the TV.

Allow the connection with the device you want to connect to the TV.

Playing Content

If you want to play content located in a Storage Service, navigate to the Smart Hub > Samsung Account menu, and then select Log In to sign in to your Samsung account. If you want to play content located on a device connected to the TV using Samsung Link, go to Step 2 below.

Select Network Device or Storage Service in the MULTIMEDIA panel. The devices or storage services connected to the TV appear.

Select a device or storage service. The folders and files shared by the selected device or storage service appear.

Select the media content you want to play from the list.

English - 19

04. Using the e-Manual

Launching the e-Manual

MENU > Support > e-Manual

The embedded e-manual contains information about your TV's key features.

‐ Alternatively, you can download a copy of the e-manual from Samsung's website, and read it on your

computer or print it out.

‐ Words in yellow (e.g., Picture Mode) indicate a menu item and bold words in white (e.g., Smart Hub)

indicate remote control buttons.

‐ Arrows are used to indicate the menu path. (Example: MENU > Picture > Picture Mode)

On the Samsung Smart Control, press the KEYPAD button, and then select e-Manual on the On-Screen Remote. You can also select Support > e-Manual in the TV's menu.

Select a category from the left side of the screen. Once a selection has been made, the contents of the selected category appear on the right side of the screen.

Select an item from the list. This opens the e-manual on the corresponding page.

If a description doesn't fit on a single screen...

• Position the focus on the page to display / on the screen. Press the < or > buttons to scroll the page up and down.

Additional e-Manual Features

Loading Pages using Keywords

Select Search to bring up the search screen. Enter a search term, and then select Done. Select an item from the search results to load the corresponding page.

English - 20

+ 45 hidden pages