1
Unpack
Taking the TV Out of the Box
• Warning:
Do not touch the TV’s
screen when you take
it out of the box. Hold it
by its edges only. If you
touch the screen, you
can cause the TV panel
to crack.
Included in this Box
Remote Control
Remote Control Batteries (2 AAA)
Also included
• User manual
• Regulatory guide
• Recommendation 1:
Two people should
remove the TV from the
box as shown above.
When removing the
TV, hold it by its edges
only. Do not touch the
screen.
Stand Parts and Cables
Screws (x8) Cable Holder
Power Cord IR Extender Cable
• Recommendation 2:
If only one person is
available to remove
the TV from the box,
remove it as shown in
the illustration above.
Hold the TV by its
edges. Do not touch
the screen.
or
Base Stand Mount
[UH6203-QSG]BN68-06331A-01ENG.indb 1 2014-07-04 4:17:14
2
Stand and styrofoam shape may vary differ depending on the model.
Assemble
1 Locate the Base, Stand Mount,
and Screws in the box and set
them aside.
✎
or
2 Place the TV on a soft surface,
screen side down. Use the
packing material to protect the
screen.
3 Fit the stand and mount
together, making sure the notch
on the mount aligns with the
stand.
Remove the top portion of
the box to locate the stand
parts.
[UH6203-QSG]BN68-06331A-01ENG.indb 2 2014-07-04 4:17:15
4 Insert 4 screws and
secure the Base to the
Stand Mount.
5 Holding the stand parallel
to the screen, slide the
stand into the notches on
the back of the TV.
6 Insert 4 screws, and
secure the stand to the
T V.
[UH6203-QSG]BN68-06331A-01ENG.indb 3 2014-07-04 4:17:16