Samsung UN55FH6030FXZA User Manual

E-MANUAL

Contact SAMSUNG WORLDWIDE

If you have any questions or comments about your Samsung TV, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.

Comuníquese con SAMSUNG WORLD WIDE

Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de atención al cliente de SAMSUNG.

Country CANADA U.S.A

LED TV

Address

Customer Care Center

Web Site

Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga Ontario L5R 4B2 Canada

1-800-SAMSUNG (726-7864)

www.samsung.com/ca (English) www.samsung.com/ca_fr (French)

Samsung Electronics America, Inc. 85 Challenger Road Ridgeﬁeld Park, NJ 07660

www.samsung.com

user manual

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

✎

If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.

[UF6030-ZC]BN68-04458F-Cover.indd 1 2013-02-28  1:56:39

BN68-04458F-00

Model _____________Serial No. _____________

A detailed User’s Manual is built into your TV. For more information about how to view this e-Manual, see page 16.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearances. Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

✎

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on non- expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats you use for viewing. Uneven LED aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally speciﬁed, and to the Original Purchaser only. The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product. Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables. For the location of a SAMSUNG Authorized Service Center, please call toll-free:

- In the United States : 1-800-SAMSUNG (1-800-726-7864)

- In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try to display any image on full screen, use TV set picture format menu for best possible match.

• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.

• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

Providing Proper Ventilation for Your TV

When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a ﬁre or a problem with the product caused by an increase in its internal temperature.

✎

Whether you install your T V using a stand or a wall-mount, use parts provided by Samsung Electronics only.

If you use parts provided by another manufacturer, it may cause difficulties with the product or result in injury caused by the product

falling.

Installation with a stand. Installation with a wall-mount.

4 inches

English - 2

[UF6030-ZC]BN68-04458F.indb 2 2013-02-28  10:23:27

Accessories and Cables

✎

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items’ colors and shapes may vary depending on the model.

✎

Check that there are no accessories hidden behind or under packing materials after you open the box.

y Remote Control (AA59-00601A) & Batteries (AAA x 2) y Owner’s Instructions y Power Cord

Assembling the Holder-Wire stand

Input Cables (Sold Separately)

To purchase the RS232 cable, contact www.SamsungParts.com.

y Warranty Card / Safety Guide y Holder-Wire Stand (BN61-05491A)

RS232 (AA39-00311A)

Component Composite (AV) Coaxial (RF)

✎

Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are below.

✎

For the best cable connection to this product, use cables no thicker than the cable illustrated below:

HDMI HDMI-DVI Audio

Cable Ports

HDMI

USB

Optical

y Maximum thickness - 0.55 inches (14mm)

English - 3

[UF6030-ZC]BN68-04458F.indb 3 2013-02-28  10:23:35

Connecting the Power Cord and the Antenna or Cable Connection

EX-LINK

DIGITAL

AUDIO OUT

(OPTICAL)

AUDIO

OUT

EX-LIN

DIGITA

UDIO OU

(

OPTICAL

)

AUDI

OUT

HDMI IN

1 (DVI)2

HDMI OUT

DVI OUT

VHF/UHF Antenna

Antenna Cable (Not Supplied)

Cable

ANT OUT

✎

Plug the power cord into a wall outlet only after you have made all other connections.

✎

If you are connecting your TV to a cable or satellite box using HDMI, Component, or Composite connections, you do not

Power Input

need to connect the ANT IN jack to an antenna or a cable connection.

✎

Use caution when you move or swivel the TV if the antenna cable is tightly connected. You could break the antenna jack off the TV.

Connecting to AV Devices (Blu-ray Players, DVD Players, etc.)

Using an HDMI cable or HDMI to DVI Cable for an HD connection (up to 1080p, HD, digital signals)

For the best quality HD picture, we recommend using an HDMI connection. Use on DVD players, Blu-ray players, HD cable boxes, and HD satellite receivers (STB).

Device

HDMI to DVI Cable (Not Supplied)

Red

White

Device

HDMI Cable (Not Supplied)

✎

HDMI IN 1 (DVI), 2

For better picture and audio quality, connect to digital devices using an HDMI cable.

An HDMI cable supports digital video and audio signals, and does not require an audio cable.

– To connect the TV to a digital device that does not support HDMI output, use an HDMI to DVI cable and

separate audio cables.

If you connect an external device to the TV that uses an older version of HDMI, the video and audio may not

work. If this occurs, ask the manufacturer of the device about the HDMI version and, if it is out of date, request an upgrade.

Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may

oc cur. We recommend using a basic high-speed HDMI cable or an HDMI cable that supports Ethernet. Note that this

TV does not support the Ethernet function via HDMI.

✎

If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.

The EX-LINK Cable Connection

EX-LINK

The EX-LINK connection is for service only.

[UF6030-ZC]BN68-04458F.indb 4 2013-02-28  10:23:38

English - 4

1 (

)

R-AUDIO-L

Using a Component Cable (up to 1080p HD signals) or Video Cable (480i, analog signals only)

Use on DVD players, Blu-ray players, cable boxes, STB satellite receivers, and VCRs.

Device

Red White Red Blue Green

Red

White

Audio Cable (Not Supplied)

Yellow

Audio Cable (Not Supplied)

Component Cable (Not Supplied)

Video Cable (Not Supplied)

Device

Connecting Audio Devices

Using an Optical (Digital) Cable Connection or a Standard Stereo Connection

Use on Digital Audio Systems, Ampliﬁers, and Home Theaters.

Audio cable (Not Supplied)

✎

When you connect a Video cable to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow).

✎

For better picture quality, we recommend the Component connection over the A/V connection.

DVD Home Theater

AUDIO IN

1 (DVI)2

AUDIO

DVI

Optical Cable (Not Supplied)

DIGITAL

OUT

AUDIO OUT

(OPTICAL)

EX-LINK

EX-LIN

✎

DIGITAL AUDIO OUT (OPTICAL)

When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

Digital Audio System

OPTICAL

of both the TV and the system.

5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1 CH.

When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD player / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and you connected it to the TV via HDMI, you will only hear 2 CH audio from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.

✎

AUDIO OUT: Connects to the audio input jacks on your amplifier/home theater.

When connecting, use the appropriate connector (sold separately).

When you connect an audio amplifier to the AUDIO OUT jacks, decrease the volume of the TV and adjust the

volume level with the amplifier’s volume control.

English - 5

[UF6030-ZC]BN68-04458F.indb 5 2013-02-28  10:23:40

Connecting to a PC

(

)

OUT

Using an HDMI cable or an HDMI to DVI cable

✎

Your PC may not support an HDMI connection.

✎

Use your PC speakers for audio.

✎

If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.

DVI OUT

HDMI OUT

EX-LINK

EX-LIN

AUDIO

HDMI IN

1 (DVI)2

HDMI to DVI Cable (Not Supplied)

DIGITA

DIGITAL

OUT

UDIO OU

AUDIO OUT

OPTICAL

(OPTICAL)

HDMI Cable (Not Supplied)

Display Modes (HDMI Input)

Optimal resolution is 1920 X 1080@60Hz.

Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

IBM

MAC

VESA DMT

640 x 350 31.469 70.086 25.175 +/720 x 400 31.469 70.087 28.322 -/+ 640 x 480 35.000 66.667 30.240 -/832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

640 x 480 31.469 59.940 25.175 -/640 x 480 37.861 72.809 31.500 -/640 x 480 37.500 75.000 31.500 -/800 x 600 37.879 60.317 40.000 +/+ 800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+ 1024 x 768 48.363 60.004 65.000 -/1024 x 768 56.476 70.069 75.000 -/1024 x 768 60.023 75.029 78.750 +/+ 1152 x 864 67.500 75.000 108.000 +/+ 1280 x 720 45.000 60.000 74.250 +/+ 1280 x 800 49.702 59.810 83.500 -/+

1280 x 1024 63.981 60.020 108.000 +/+ 1280 x 1024 79.976 75.025 135.000 +/+

1366 x 768 47.712 59.790 85.500 +/+ 1440 x 900 55.935 59.887 106.500 -/+

1600 x 900RB 60.000 60.000 108.000 +/+

1680 x 1050 65.290 59.954 146.250 -/+ 1920 x 1080 67.500 60.000 148.500 +/+

English - 6

[UF6030-ZC]BN68-04458F.indb 6 2013-02-28  10:23:43

Connecting to a Network

You can connect your TV to your local area network (LAN) using a wired or wireless connection.

✎

After you have “physically” connected your TV to your network, you must configure the network connection to complete the process. You can configure the connection during the Initial Setup process (see page 10 ) or after the Initial Setup process, through the TV’s menu (see page 15).

The Wireless Network Connection

You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must ﬁrst attach a “Samsung Wireless LAN Adapter” (WIS09ABGNX, WIS12ABGNX - sold separately) to the USB port on the side of your TV. See the illustration below.

The LAN Port on the Wall

LAN Cable (Not Supplied)

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, E-commerce sites, and Samsungparts. com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection using one of the other protocols, the video may not play smoothly.

Wireless Security

Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless router or modem) to transmit an encrypted security code called an access key.

Your TV is compatible with the following security protocols:

y Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK y Encryption Type: WEP, TKIP, AES

If you select Pure High-throughput (Greenﬁeld) 802.11n mode and the Encryption type is set to WEP or TKIP on your AP or wireless router, your TV will not support a connection, in compliance with new Wi-Fi certiﬁcation speciﬁcations.

Wireless IP Sharer

(AP having DHCP Server)

TV Side Panel

Samsung Wireless

LAN Adapter

English - 7

[UF6030-ZC]BN68-04458F.indb 7 2013-02-28  10:23:44

The Wired Network Connection

There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:

The Modem Port on the Wall

✎

The TV does not support network speeds less than or equal to 10Mbps.

✎

Use Cat 6 (STP Type*) cable for the connection. (*Shielded Twisted Pair)

External Modem

(ADSL / VDSL / Cable TV)

LAN Cable (Not Supplied)Modem Cable (Not Supplied)

LAN Cable (Not Supplied)

TV Rear Panel

English - 8

[UF6030-ZC]BN68-04458F.indb 8 2013-02-28  10:23:45

The Remote Control Buttons

✎

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Display and select the available video sources.

Turns the TV on and off.

Press to directly access to channels.

Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to On will reduce the battery usage time.)

Press to select additional digital

channels being broadcasted by the

same station. For example, to select

channel ‘54-3’, press ‘54’, then press

‘-’ and ‘3’.

Adjusts the volume.

Displays the channel list on the screen.

View Contents Home.

Quickly select frequently used

functions.

Moves the cursor, selects the on-

screen menu items, and changes the

values seen on the menu.

Return to the previous menu.

E-MANUAL: Displays the e-Manual.

P.SIZE: Lets you choose the picture size.

CC: Controls the caption decoder.

Return to the previous channel.

Cut off the sound temporarily.

Change channels.

Displays the main on-screen menu.

Turns the 3D image on or off.

Displays information on the TV screen.

Exit the menu.

Use these buttons according to the directions on screen.

Use these buttons in a speciﬁc feature.

Installing batteries (Battery size: AAA)

✎

NOTE

Install the batteries so that the polarity of the batteries (+/-)

matches the illustration in the battery compartment. Use the remote control within 23 feet of the TV.

Bright light may affect the performance of the remote control.

Avoid using when near fluorescent lights or neon signs. The color and shape may vary depending on the model.

English - 9

[UF6030-ZC]BN68-04458F.indb 9 2013-02-28  10:23:47

Conﬁguring the Basic Settings in Initial Setup

INFO

GUIDE

When you turn the TV on for the ﬁrst time, a sequence of screens and on-screen prompts will assist you in conﬁguring the TV’s basic settings. Plug the power cord into a wall outlet, and then press the POWERP button to turn on the TV.

✎

Setup is available only when the Source is set to TV. See Changing the Input Source on page 12.

✎

To return to the previous step in the Setup sequence, select Previous, and then press ENTERE button.

✎

If you are not using a cable box or satellite box, make you sure have connected the TV to an antenna or cable connection before you turn on the TV. See page 4 for instructions.

✎

If you want to configure a network connection, make sure you’ve connected the Samsung Wireless LAN Adaptor or a LAN cable to your TV. See pages 7 and 8 for instructions.

Menu Language:

Select a menu language.

Use Mode: Select the Use Mode.

Network Settings: Conﬁgure the network settings.

Wireless Network 1. The TV searches for and then displays all the wireless networks within range. When

After you press the Power Button, the Start Screen appears. Press the

ENTER

screen appears. Use the ▲/▼buttons to select a language, and then press ENTERE.

The cursor jumps to Next. Press the ENTERE button.

On the Use Mode screen, press ENTERE to select the Home Use mode. The cursor jumps to Next. Press the ENTERE button. The

Network Settings screen appears.

1. The TV automatically senses whether you connected the Wireless Adaptor or a LAN

2. Enter your network security key or WPS PIN using the remote.

3. When done, use the ▲/▼/◄/► buttons to select Next if you have entered

4. The TV checks the wireless connection. If the connection is successful, the “Your

button on your remote to continue. The Menu Language

✎

Store Demo mode is for retail environments only. If you select Store Demo, some functions will not work, and the TV will reset

all functions to their factory default every 15 minutes. For more information about Store Demo, go to the end of this section.

cable to the TV. To continue conﬁguring the network settings, press the ENTERE button, and then go to Wireless Network or Wired Network below.

✎

If you do not have a network, select Skip, press the ENTERE button, and then go to Auto Program (1) on the next page.

✎

If you have a Network, you can also select Skip, and then configure your network later through Network Settings in the TV’s Menu. For more information, refer to “Setting the Wired Network / Setting the Wireless Network” in the e-Manual or go to page 16 in this manual.

done, it displays a list of the networks. Use the ▲/▼buttons to select a network, and then press ENTERE. The cursor jumps to Next. Press ENTERE. The Security Key screen appears.

✎

If you have a WPS(PBC) compatible router, select WPS(PBC) instead, press

ENTERE, and then follow the directions on the screen. When done, go to

Step 4.

✎

Enter numbers by pressing the number buttons on your remote.

✎

Enter letters by selecting a letter using the ▲/▼/◄/► buttons, and then pressing ENTERE.

✎

To display capital letters (or redisplay small letters if capital letters are displayed), select Shift, and then press ENTERE.

✎

To display symbols and punctuation, select , and then press ENTERE. To redisplay letters, select Shift, and then press ENTERE.

a security key or WPS PIN if you have entered a WPS PIN, and then press

ENTERE.

wireless network and Internet connection are setup and ready to use.” message appears. The cursor jumps to Next. Press ENTERE, and then go to 4 Software Update on the next page.

✎

If the connection fails, select Previous, repeat Step 1 and 2, carefully re-enter your security key or WPS PIN, then repeat Steps 3 and 4. If it fails again, select Next on the “Connection Failed” screen, and then go to

Auto Program (1) on the next page. Configure your network later through Network Settings in the TV’s Menu. For more information, refer to “Setting

the Wired Network / Setting the Wireless Network” in the e-Manual.

POWER

English - 10

[UF6030-ZC]BN68-04458F.indb 10 2013-02-28  10:23:49

Wired Network The TV checks the network connection, then displays the “Wired network and Internet

connection complete” message appears and highlights Next. Press ENTERE.

Software Update:

Upgrade the software to the latest version.

Auto Program (1): Select where your TV signal comes from.

Auto Program (2): Select the search options

On the Software Update screen, press the ENTERE button to upgrade the TV’s software. If new software is available, the player downloads and installs the new software. When the download is complete, select Next, and then press ENTERE.

✎

To upgrade later, select Skip, and then press ENTERE. For more information, see “Software Update” in the e-Manual.

✎

You can only upgrade software if your TV has an active network connection.

✎

If no update software is available, the Auto Program screen appears automatically.

Press the ▲ or ▼ button to select the correct option, and then press ENTERE twice.

Let’s ﬁnd and store channels on your TV. Do you need to search for channels?

y Yes, I need to.: Select if you have an antenna or a cable connection without a set-

top-box, and then go to Auto Program (2) below.

y No, I don’t need to.: Select if you have a satellite or cable set-top-box. You do not

need to run Auto Program. Select Next or Skip, and then go to 6 Clock - Manual below.

1. Press ENTERE. The Air/Cable screen appears.

2. Press the ▲ or ▼ button to select Air or Cable, and then press ENTERE. A

check appears next to your selection. Select Next, and then press ENTERE. You can check both if you have both connected.

3. If you selected Air, channel memorization starts. Go to 5 Auto Program (3). If you selected Cable, you’ll go to the Cable System screen. Use the▲ or ▼ button to select Digital Cable System, and then press ENTERE. Use the ▲ or ▼ button to select the correct cable signal format - STD, HRC, or IRC - and then press

ENTERE. Most cable systems use STD. Repeat the same process for Analog

Cable System.

4. When done, select Next, and then press ENTERE.

Auto Program (3):

Channel memorization

Clock: Set the Clock

Setup Complete

Channel memorization starts. Channel memorization can take up to 45 minutes. When channel memorization is complete, the Channels Memorized screen appears.

Press ENTERE. The Clock screen appears.

✎

You can press ENTERE at any time to halt the memorization process.

Press the ▲ or ▼ button to select Auto or Manual, and then press ENTERE twice.

Auto

If you selected Auto, you’ll go to the Time Zone screen, and then the DST screen. On the Time Zone screen, use the ▲ or ▼ button to select your time zone, and then press

ENTERE twice. On the DST screen, select whether to turn DST (Daylight Savings

Time) On or Off, and then press ENTERE. When done, press ENTERE. Manual

If you selected Manual, select Date, and then press ENTERE. Use the number buttons or the ▲ or ▼ button to set the date. Use the ◄ or ► button to move between entry ﬁelds. When done, press ENTERE. Select Time, and then press ENTERE. Set the time in the same fashion. When done, press ENTERE. Then, select Next, and then press ENTERE. The Setup Complete screen appears.

Review the Setup data, and then press the ENTERE button.

If You Want to Re-run Setup...

MENU → System → Setup → ENTER

If You Want to Turn the Store Demo Mode On or Off.

To set or unset Store Demo mode outside of Setup, press and release the Controller when the power is on. The Function menu screen appears. Push the Controller to the left (to MENU (m)) and hold for more than 5 seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function menu using the Controller, push the Controller to the right (to Source(s) and hold for more than 5 seconds. See page 13 for information about the Controller.

English - 11

[UF6030-ZC]BN68-04458F.indb 11 2013-02-28  10:23:51

Changing the Input Source

Source

When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or switch to your cable box or STB satellite receiver, you need to change the

Source.

1. Press the SOURCE button on your

remote.

2. Select a desired external input source.

■■ TV / HDMI1/DVI / HDMI2 / AV / Component

✎

You can only choose external devices that are connected to the TV. In Source, connected inputs are

highlighted.

How to Use Edit Name Edit Name lets you associate a device name to an input

source. To access Edit Name, press the TOOLS button when the Source is displayed. The following selections appear under Edit Name:

■ VCR / DVD / Cable STB / Satellite STB / PVR STB /

AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA

Select the name of the device connected to each input jack to make your input source selection easier.

✎

If you have connected a PC to the HDMI IN 1 (DVI) port with an HDMI cable, select PC under Edit Name to enter a device name.

✎

If you have connected a PC to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, select DVI PC under Edit Name to enter a device name.

✎

If you connected an AV device to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, select DVI Devices under Edit Name to enter a device name.

Information

You can see detailed information about the connected external device.

How to Navigate Menus

Your TV’s Main and Tools menus contains functions that let you control the TV’s features. For example, in the Main menu you can change the size and conﬁguration of the picture, its brightness, its contrast and so on. There are also functions that let you control the TV’s sound, channel conﬁguration, energy use, and a host of other features. To access the main, on-screen menu, press the MENU (m) button on your remote. To access Tools menus, press the TOOLS button. Tools menus are available when the TOOLS menu Icon is displayed on the bottom right of the screen.

The illustration below displays the buttons on the remote you use to navigate the menus and select and adjust different functions.

CONTEN

1 MENU button: Displays the main on-screen menu. 2 ENTERE and Direction buttons: Use the Direction

buttons to move the cursor and highlight an item. Use the Enter button to select an item or conﬁrm the setting.

3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu. 5 TOOLS button: Displays Tools menus when available.

How to Operate the Main Menu (OSD - On Screen Display)

The access steps may differ depending on the menu option you select.

MENU The main menu options appear on

2 3

4 5

▲ / ▼

ENTER

▲ / ▼

◄ / ►

ENTER

EXIT

the screen:

Picture, Sound, Channel, Network, System, Support.

Select a main menu option on the left side of the screen with the ▲ or ▼ button.

Press ENTERE to access the sub-menus.

Select the desired submenu with the ▲ or ▼ button.

Adjust the value of an item with the ◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.

Press ENTERE to conﬁrm the selection.

Press EXIT.

English - 12

[UF6030-ZC]BN68-04458F.indb 12 2013-02-28  10:23:53

Using the TV’s Controller (Panel Key)

The TV’s Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control.

Function menu

CONTENT

m R s

Return

TV Controller

Remote control sensor

Power on

Adjusting the volume

Selecting a channel

Using the Function menu

Selecting Contents Home

Selecting the Menu (m)

Selecting a Source (s)

Power Off (P)

✎

To close the Menu, Contents Home, or Source, press the Controller for more than 1 second.

✎

When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the

Turn the TV on by pressing the Controller when the TV is in standby mode.

Adjust the volume by moving the Controller from side to side when the power is on.

Select a channel by moving the Controller backwards and forwards when the power is on.

To view and use the Function menu, press and release the Controller when the power is on. To close the Function menu, press and release the Controller again.

With the Function menu visible, select CONTENT by moving the Controller backwards. The Contents Home main screen appears. Select a media source by moving the Controller back and forth, and then pressing the Controller.

With the Function menu visible, select the Menu (m) by moving the Controller to the left. The OSD (On Screen Display) Menu appears. Select an option by moving the Controller to the right. Move the Controller to the right or left, or backwards and forwards to make additional selections. To change a parameter, select the it, and then press the Controller.

With the Function menu visible, open the Source (s) by pushing the Controller to the right. The Source screen appears. To select a source, move the Controller back and forth. When the source you want is highlighted, press the Controller.

With the Function menu visible, select Power Off (P) by pulling the Controller forwards, and then press the Controller.

controller. If you press it first, you cannot operate it to move the up/down/left/right directions.

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord.

Using Contents Home

Contents Home provides easy, on-screen access to four functions that let you manage and access channels, set favorite channels, access photos, videos, or music on USB devices, cameras, and PCs, select video sources, and set the TV to turn on automatically when a show you want to watch is on. The four functions are listed below:

y Channel List: Lets you manage channels, select favorite channels, and delete channels from the Added Channel list (the

channels that appear when you press the CH button).

y AllShare Play: Lets you access, view, or play photos, videos, or music located on USB devices, digital cameras, cell

phones, and PCs. PCs and cell phones can be accessed wirelessly, through your wireless network.

y Schedule Manager: Lets you schedule shows and channels for viewing. When a show or channel is scheduled, the TV

automatically turns on at the set time and changes the channel to the selected channel.

y Source: Lets you select a connected external video source to view. To access Contents Home, press the CONTENT button on your remote. For more information about Contents Home, see the e-Manual.

English - 13

[UF6030-ZC]BN68-04458F.indb 13 2013-02-28  10:23:55

Installing the Wall Mount (Optional)

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product.

Installing the Wall Mount Kit

The wall mount kit (sold separately) lets you mount the TV on the wall. For detailed information about installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.

To order the wall mount, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).

Wall Mount Kit Speciﬁcations (VESA)

Install your wall mount on a solid wall perpendicular to the ﬂoor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎

NOTE

Standard dimensions for wall mount kits are shown in the table below.

Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.

Do not use screws that do not comply with the VESA standard screw specifications.

Do not use screws that are longer than the standard length or do not comply with the VESA standard screw

specifications. Screws that are too long may cause damage to the inside of the TV set. For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ

depending on the wall mount specifications. Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal

injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or

the consumer fails to follow the product installation instructions. Do not mount the TV at more than a 15 degree tilt.

Always have two people mount the TV on a wall.

Product Family

LED-TV

✎

Remove the screws in the mounting holes before you install the wall mount.

TV size in

inches

32~40 200 X 200 M6

46~60 400 X 400 M8

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

VESA screw hole

specs (A * B) in

millimeters

Standard Screw Quantity

English - 14

[UF6030-ZC]BN68-04458F.indb 14 2013-02-28  10:23:57

+ 31 hidden pages