Samsung UN60F8000BFXZA, UN55F8000BFXZA Installation Guide
QUICK START
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Attach the TV to
the Stand
Step
1
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Connect video
devices
Step
GUIDE
BN68-05493A-02
Using the Smart
Touch Control
2
Step
3
Power on and
start the initial
setup
Step
4
Included with your TV
Remote Control Stand Parts and Cables
Smart Touch Control Power inlet cover Cable clip Safety strap
x 2
Batteries (AAA x 4) Wall mount adapter IR extender Power cord
RCA adapter x 2 Component adapter Base
x 2
x 8
Step 1 Attach the TV to the Stand
Open the package, and remove the top piece of
1A
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
1C
L
R
packing material, leaving the TV in the box.
Fit the base and legs together, making sure that
the legs are correctly aligned with the base.
Remote Control Leg Screws
Also included: User manual, 3D Active Glasses
Assemble the stand first, before removing the TV
1B
Base Screws
1D
from the box. You will need the base, legs and
screws.
x 2
Leg
Insert 2 screws through the base into each leg as
shown, and then secure the legs to the base with
a screwdriver.
x 8
Accessories may be
✎
located at different
positions, depending on
the model.
1E
1G
x4 (M4 X L12)
x4 (M4 X L12)
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
Insert 4 screws and secure the stand to the TV.
1F
1H
Holding the stand parallel to the screen, slide the
stand legs into the notches on the back of the TV.
When placing the product on a console or shelf,
make sure that the stand does not protrude
beyond the edge of the console or shelf. This
may cause the product to fall off and result in a
malfunction or injury.
Step 2 Connect video devices
We suggest using HDMI connections whenever possible for the best picture quality. Use the included AV adapters to connect older devices.
Please check the shape of the plugs to avoid inserting them upside down.
✎
The appearance of your TV may differ from the images below, depending on the model.
✎
Remove the Connection Cover
USB Connections
You can connect USB storage devices
to the USB ports and enjoy personal
photos, videos, and music.
You can connect home theater systems to the OPTICAL or
AUDIO OUT ports.
or
USB
(5V 0.5A)
USB
(5V 0.5A)
USB
(HDD 5V 1A)
DIGITAL
AUDIO OUT
(OPTICAL)
AUDIO
OUT
TV Camera
Press the camera down to activate it. The camera enables voice recognition and motion
control for your TV.
Use the Scroll wheel on the back of the camera to adjust the camera's angle.
Scroll wheel for
camera angle
adjustment
Power Input
Plug in after you have made all other connections.
Good Connection:
Component (Y, PB, PR) or AV (Composite)
Match the colors on your device's cables to the colors on the
device's out ports. Connect the device's cables to the included
adapters, and then connect the adapters to the appropriate
ports on the TV as shown in the table below. Make sure the
colors match. The Component connection is shown on the top.
The AV connection is shown on the bottom.
AV IN 1 Audio (L/R)
Best Connection : HDMI
HDMI Cable
We suggest using HDMI whenever
possible.
HDMI 1 is the default port for a cable
HDMI Port
or satellite set-top box.
Use the other ports for Blu-ray
players, game consoles, and other
devices.
Connect the IR extender to the IR Out
port to control external devices connect-
ed to the TV using the Smart Touch Con-
trol. For more detailed information, refer
to the "Universal Remote Control Setup"
section in the User manual.
Step 3 Using the Smart Touch Control
EX-LINK
HDMI IN 4
(MHL)
IR OUT
Wired Ethernet
(STB)
HDMI IN 2
(DVI)
HDMI IN 1
Step 4 Power on and start the initial setup
HDMI IN 3
(ARC)
LAN
COMPONENT IN
AV IN 2
ANT IN
AIR/CABLE
Connect the cable from
the antenna or cable
TV outlet.
Video
Audio (L/R)
Video
Insert the batteries into the Smart Touch Control
Insert the tip of a credit card or similar item into the notch on the side of the Smart Touch Control,
and then twist the card to open and remove the remote's back cover.
The notch's location may vary depending on the type of Smart Touch Control provided.
✎
Using the touch pad
navigation selection scrolling
Information required:
• Wi-Fi network password (if you use one) • Zip code • Cable or satellite provider info
Plug in the TV. Press the power button on the remote to turn on the TV and start the initial setup.
The TV must be connected to the Internet to use the Smart Features. If you have a wireless
✎
network, confirm that your network router is working before you start the initial setup. If
you have a wired network, connect the TV to the network with a CAT 7 cable before you
begin.
Troubleshooting
The stand is wobbly or crooked
Make sure the stand is properly assembled.
The TV won’t turn on
Make sure all cables are fully inserted, and that the remote has batteries installed.
I don’t know where to plug in <device>
Devices without HDMI may require the included A/V adapter.
I have extra parts
The TV includes some optional parts to help with wall mounting and cable routing.
To control the highlight, move
your thumb across the pad.
To select an item, press the
pad until you hear a click.
Move your thumb along the
ridges to quickly scroll through
items.
Pairing the Smart Touch Control
If you need to reestablish the connection between the TV and the Smart Touch Control, press the
pairing button at the back of the Smart Touch Control, pointing at the remote control sensor of the
TV.
Congratulations on your new Smart TV!
If you experience issues, please do not take the TV
back to the store.
In the United States of America, call us at
1-800-SAMSUNG (1-800-726-7864) or visit us at www.
samsung.com or www.samsung.com/spsn for support
and warranty service.
For other countries, refer to "Contact SAMSUNG
WORLDWIDE" in the user guide.
Loading...