Samsung UN55C9000ZFXZA, UN46C9000ZFXZA Owner’s Manual
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comment contacter Samsung darts le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs
Samsung.
Comuniquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relacion con los productos de Samsung, comuniquese con el centro de
atencion al cliente de SAMSUNG.
r=.
m
.-4
<
B
CANADA 1-800-SAMSUNG (726-7864) w_!w.samsung.com Samsung Electronics Canada Inc., Customer Service
U.S.A 1-800-SAMSUNG (726-7864) w_!w.samsung.com Samsung Electronics America, Inc. 105 Challenger
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
Road Ridgefield Park, NJ 07660-0511
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
imagine the possibilities
Thank you for purchasing this Samsung product.
Toreceive more comblete service, please reg ster
your product at
www.samsung.com!register
Mode Serial No.
Z
BN68-02833A-01
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
'_bs See the warranty card for more information on warranty terms.
Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to viewwide screen format full-motion video.
The images displayedon them should primarily be in the wide screen 16:9 ratio format, or expanded to fillthe screen if your model offers this feature and
the images are constantly moving. Displaying stationary graphics and images on screen, such asthe darksidebars on no expanded standard format
television video and programming, should be limited to no more than 5% of the total television viewing perweek.
Additionally, viewing other stationaryimages and text such as stock market reports, video game displays, station Iogos, web sites or computer graphics
and patterns, should be limited as described above for alltelevisions. Displaying stationaryimages that exceed the above guidelines can cause uneven
aging of LEDDisplays that leavesubtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and
primarily display full screen moving images, not stationary patternsor dark bars. On LEDmodels that offer picture sizingfeatures, use these controls to
view different formats as a full screen picture.
Be carefulin the selection and duration of television formats usedfor viewing. Uneven LEDaging as a result offormat selection and use, as well as burned
in images, arenot covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICSNORTH AMERICAN LIMITEDWARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusions and limitationscontained herein,SAMSUNG will additionallyprovide Warranty RepairService
in the United States on SAMSUNG products purchased in Canada, and inCanada on SAMSUNG products purchased inthe United States, forthe
warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center.Along with this Statement, the Original Limited
Warranty Statement and a dated Bill of Sale as Proofof Purchase must be presented to the Service Center.Transportation to andfrom the Service
Center isthe responsibility of the purchaser.Conditions covered are limited only to manufacturing defects in material or workmanship, and only those
encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or
replacements, accessories, options, upgrades, or consumables.
Forthe location of a SAMSUNG Authorized Service Center, please call toll-ffee:
- in the United States : 1-800-SAMSUNG (1-800-726-7864)
- in Canada : 1-800-SAMSUNG
Avoid displaying still images (such asjpeg picture files)or still image elements (such as TV channel Iogos, panorama or 4:3 image format, stock or news
bars at screen bottom etc.) on the screen. Constant displayingof a still picture can causeghosting of the LED screen, which will affect image quality. To
reduce risk ofthis effect, please follow the recommendations below:
• Avoid displaying the same TV channel for long periods.
• Always try to display a full screen image.
• Reducing brightness and contrast will help to avoid the appearance of affepimages.
• Use allTV features designed to reduce image retention and screen burn, refer to proper user manual section for details.
Keepthe requireddistances between the product and other objects (e.g.walls)to ensureproper ventilation.
Failingto do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
'_bs When using a stand or wall-mount, use parts provided W Samsung Electronicsonly.
Ifyou use parts provided by another manutacturer, it may result in a problem with the product or an injurydue to the product falling.
The appearance may differ depending on the product.
t
,,
[ 4 inches -',
4 inches
j_4__,_L___......
', "!"4 incises
4 inche inches
m m
English
Contents
• List of Features ......................................................... 4
• Accessories .............................................................. 4
• Viewing the Control Panel ......................................... 5
• Mini Remote Control ................................................. 6
• Viewing the Touch remote ......................................... 7
• Connecting to an Antenna ...................................... 10
• Plug & Play (Initial Setup) ......................................... 10
• Connecting to an AV Device .................................... 11
• Connecting to an Audio Device ............................... 13
• Connecting to a PC ................................................ 14
• Changing the Input Source ..................................... 15
• How to Navigate Menus .......................................... 15
• Channel Menu ........................................................ 16
SeeingChannels 16
UsingFavorite Channels 16
MemorizingChannels 16
Editing Channels 17
Other Features 17
• Picture Menu .......................................................... 18
Changingthe PresetPicture Mode
Adjusting Picture Settings
EconomicalSolutions
Changingthe PictureOptions
Viewing TV usingthe 3D function
Settingup the TVwith Your PC
• Sound Menu ........................................................... 24
Changingthe PresetSound Mode 24
Adjusting Sound Settings 24
Sound Settings 25
• Setup Menu ............................................................ 26
Settingthe Time 26
Usingthe SleepTimer 26
Settingthe On / OffTimer 26
Locking Programs 27
Other Features 28
• Support Menu ......................................................... 30
• Network Connection ............................................... 32
Connecting to a Wired Network 32
Connecting to a Wireless Network 34
• Media Play.............................................................. 39
Connecting a USB Device 39
Connecting to your PCthrough a network 39
Screen Display 41
PlayingMultiple Files 44
Media Play - Additional Functions 44
• Anynet+ .................................................................. 46
SettingUp Anynet+ 47
Switching between Anynet+ Devices 47
Recording 48
Listeningthrough a Receiver 48
Troubbshooting for Anynet+ 49
• Internet@TV............................................................ 50
GettingStarted with Internet@TV 50
Settingup Internet@TV 51
Usingthe Internet@TVservice 53
PROFILEWidget 55
Widget Gallery 55
Troubbshooting for Intemet@TV 56
HelpWebsite 56
AIIShare .................................................................. 57
18
18
18
19
21
24
About AlIShare 57
SettingUp AlIShare 57
• Assembling the Cables ........................................... 59
• Securing the TV to the Wall..................................... 60
• Troubleshooting ...................................................... 61
• Enclosed Wireless LAN Adapter .............................. 64
• License ................................................................... 65
• Specifications ......................................................... 65
• Dimensions ............................................................. 66
• Index ...................................................................... 67
• Regulatory Compliance Information......................... 68
This function can be used by pressingthe
TOOLS button on the remote control.
Check the Symbol!
Note
Indicatesadditionalinformation.
®
Step by Step Guide
Check here for instructions on how to open
the rebvant submenu within the OSD (on
screen display).
English 3
Getting Started
• Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box / STB (Set-Top-Box) satellite receiver.
• Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 89).
• Internet@l%_: You can use various internet services and view useful information and entertaining content (p, 50).
• AliShare: AIIShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 57),
• Self Diagnosis: You can check whether picture or sound operate normally (p. 30),
• 3D: This exciting new feature enables you to view 3D content.
Please make sure the following items are included with your LEDTV. if any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
Touch remote
W rd
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii@_!@i_ii_!_i_ii_!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i_!i!_!@_i_i_i_i__i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_!_@!!i!i_!_i_!_z!_z!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!i_ii@_i_!i_!i_!i_,_i__i_@!!!@i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_!_!!i_I!
Wall Mount Box (Assembly to Wall)
Three of each type of screw are supplied. Only two are required for assembly. The other is a spare.
(2EA)
English
Forbestcableconnectiontothisproduct,besuretousecableswithamaximumthicknessasbelow:
_ i • Maximumthickness-0.55inches
input Cables (Sold Separately)
i ,,n m v
The product color and shape may vary depending on the model.
3D Emitter --
Woofer
Speakers
I f
1 I
(14mm)
F
Power indicator
Remotecontrol sensor
Speakers
To control the TV using the LEDtouch pad, tap the LED touch pad centered underneath the stand. The touch pad will
slide out by itself. The LED touch pad will slide back in if unused for a specified period of time.
3D Emitter
Power Indicator
Remote control eenso-
SOURCEE_
MENU rrrl
--VOL+
VCHA
(b (Power) Turns the TV on or off.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
The LED on the 3D emitter blinks only when sending a 3D signal.
Blinks and turns off when the power is on and lights up in standby mode.
Aim the remote control towards this spot on the TV.
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE_ button on the remote control.
Displays an on-screen menu, the OSD (on screen display) of your TV's features.
Adjusts the volume. Inthe OSD, use the --VOL+ buttons as you would use the
and !_ buttons on the remote control.
Changes the channels. Inthe OSD, use the V CH A buttons as you would use the
T and A buttons on the remote control.
English 5
Getting Started
The Mini Remote Control is a simplified remote control that consists of the power, channel and volume buttons only,
Description
Power OrVOff button
Next channel
Volumedecrease --
Previouschannel
This is a special remote control for the visually impaired and has Braille points on the Channel and Volume buttons.
CALIFORNIA USA ONLY
This Perchlorate warning applies only to primary OR (Manganese Dioxide) Lithium coin cells in the product sold
or distributed ONLY in California USA 'Perchloate Material - special handling may apply, See www.dtsc.ca.gov/
hazardouswaste/perchiorate:'
Inserting the battery
!
1. Turnthe battery cover counterclockwise to unlock it and then
separate the battery cover.
2. Insert a 3V Lithium battery with the + side facing down into the
battery cover.
3. Place the battery cover into the remote control aligning it with the
grooves and then turn the battery cover clockwise to lock the
cover.
If the remote control doesn't work, check the following:
* Isthe TV power on?
* Are the plus and minus ends of the batteries reversed?
* Are the batteries drained?
* Isthere a power outage or is the power cord unplugged?
* Isthere a special fluorescent light or neon sign nearby?
Volume increase
IrDAtransmitter
'_bs Point tile IrDAtransmitter at tile TV
to use tile mini remote.
G English
Description
TV Power button --
Touch screen
Front View RearView
Battery cover
Charge Port
Speaker
SOUBCE Display the source list (TV,PC, etc.) on the screen.
Channe Press to change channels.
Inserting the battery
!
1. Slide and open the battery cover
in the direction of the arrow.
-- Earphonejack
Turn the TV on and off.
Mute or unmute the sound.
Press to control the volume.
2. Insert the battery with the
Samsung logo facing up.
3. Slide and close the battery
cover in the direction of the
arrow.
English 7
Getting Started
Remote Control Screen Display
Pressto directly access channels.
Returnsto the previous channel.
Pressto select additional channeb (digital)being broadcasted by the same station. For example, to
select channel "54-3", press "54", then press "-" and "3".
CONTENT: Displaysthe Content View, which includes Channel List, Intemet@TV, Media Play,
AIIShare and 3D.
MENU: Bringsup the OSD.
INTERNET@TV:Link to vanousinternet services (p. 50).
RETURNg: Returnsto the previous menu.
TOOLS_'3: Quickly select frequently used functions.
INFO i: Dbplays information on the TVscreen.
EXIT*[J: Exits the menu.
Use these buttons in Media Play and Anynet+ modes (p.39, 46).
(_: Controls recording for Samsung recorders that have the Anynet+ feature)
Buttons used in the Channel List, Internet@l"V, Media Play menu,etc.
xi_,!,,_',i,i,i,i,i,i,i,i,i,i,i,i,i' !!!!!!!!!!!!i,4!_!_!_!_!_!_!_!_!_!_!_!_!ilii i i i i i i i i i i i i i
!heNo 0at,onorMe,u Tapsony,cos.
Selects the on-screen menu
items and changes the values
seenon the menu.
INTERNET@'FV:Link to various internet
services(p. 50).
MEDIA_P:Displays Media Play (p. 39).
3D: Sets the 3D mode. (p. 22).
YAHOO!: Runs the Yahoo widget. (p. 54).
CHLIST: Displayschannel lists on the screen
(p. 16).
FA_,LCH:DisplaysFavorite Channel Lists on the
screen(p. 16).
RSlZE: Selects the picture size (p. 20).
CO: Controb the caption decoder (p.
28).
MTS: Pressto choose stereo, mono or
SeparateAudio Program (SAPbroadcast)
(p.25).
English
Setting Up Your Remote
You can set up your 3" LCD Touch Remote to control your TV in three ways:
As a standard, IR (Infra Red) remote
As an IRremote, your LCD Touch Remote works the same way as a standard push button remote, except you touch icons
and symbols on the LCD screen to control your TV instead of pushing buttons. Using your Touch Remote as an IR remote
requires no more set up than a standard remote and gives you access to most of the remote's functions and features.
As an extended distance, Wi-Fi remote
As an extended distance, Wi-Fi remote, your Touch Remote offers all the functions and features of the IR mode and, because
it uses Wi-Fi radio waves instead of infra red waves to control your TV, it lets you control your TVfrom a much greater distance
and even from around corners. It also gives you access to the Twin Display function which lets you watch the program or
content that is on your TV screen on the LCD screen of the Touch remote. The long distance, Wi-Fi mode requires a few
additional setup steps; possibly including re-initialization. It also requires you to attach Samsung's Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, or WIS10ABGN) to one of your TV's USB ports.
As a networked, Wi-Fi remote
As a networked, Wi-Fi remote, your Touch Remote gives you all the functions and features of the IR and the extended distance
modes and also gives you access to the Multimedia function which lets you listen to or view music, movie, and picture files
from your PC on your TV screen. You can also download upgrades to your Touch Remote's software directly from the Internet.
The networked, Wi-Fi mode requires the largest number of setup steps. Inaddition, to use the networked, Wi-Fi mode,
you need a working local area network and a wireless router. You also need to attach Samsung's Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, or WIS10ABGN) to one of your TV's USB ports. To use the Multimedia function, you need to
install Samsung's PC Share Manager on your PC. You can download PC Share Manager from http://www.samsung.com.
Setting up the Network
You can set up a wireless network for the 3-inch remote control.
How to connect using PBC (WPS)
Ifyour router has a PBC (WPS) button, follow these steps: PressthePBCbuttononthe
1. Connect your TV to your LAN. accesspointwithin120
2. On the Services screen, touch Settings _ Remote Settings. RemainingTime:112
3. Touch Network.
4. Touchthe PBC(WPS).
5. If the Press PBC button on the access point within 120 seconds, message appears,
press the PBC button on the device to connect.
For more information, refer to the wireless network setup manual of the device to be connected.
6. If the device is connected properly to the TV after starting count on message box then message box will be disappeared
automatically.
If the connection fails, please retry after 2 minutes.
seconds.
Connecting to network
To setup the wireless connection automatically, follow these steps:
1. Follow Steps 1through 3 in the "How to connect using PBC (WPS)" procedure.
If the intended network cannot be found in the list, select $_ to open the list of
networks again.
2. Select a network and connect to the network using the encryption method (PIN, security
key, ad-hoc, etc.) set for the network.
3. When the network connection is complete, select Test to perform a network test.
For the automatic IP,the AP will automatically define the IP Address, Subnet Mask,
Gateway and DNS server.
For the manual IP, you can select Edit and directly enter the IP Address, Subnet
Mask, Gateway and DNS server.
For Full Touch Remote instructions, please read the Touch Remote's user manual.
English 9
Getting Started
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
VHF/UHF Antenna
Antellna Cable (Not Supplied)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Pressthe
POWER (b button. Plug & Play is available only when the Input source is set to T_.
To return to the previous step, press the Red button.
o
Turn on the TV ana
Touch Remote
Turn on the Touch Remote and then tap OK on
}ur remote,
<s&
t mar taKeabOUtone T/inureto estaDiisn a
wlretess connection between the TV and touch
remote using the Samsung Wireless LAN
Adaoter.
Connect the Samsung
Wireless LAN Adapter
Selecting a tanguage
Selecting Store Demo
or Home Use
Selecting an antenna
Selecting a channel
Setting the Clock
Mode
Vew the HD
Connection Guide
Enjoy your TV. Press the FNTFR _ DUIIOn.
If YOUWant to Reset This Feature...
(_ MENU _ Setup --_Plug & Play --_ ENTERI_
• Connect the Samsuno Wireless LANAdapter to the T_, You can connect the Samsung
Wireless LAN Adaoter using one of the methods shown on page 35.
• f the connection fails, reconnect tne Samsung Wireless LAN Adapter and then try
agar
Press the A or T outton, tnen press the ENTERE_ button.
Select the desired OSD On Screen Display) language.
Press the _1or _- outton, tnen press the ENTERE_ button,
• Select the Home Use mode, Store Demo Mode is for retail environments.
• To return the unit's settings from Store Demo to Home Use (standard): Press the
votume DUtton on the TV.When you see the volume OSD, press and hold MENU for 5
_ec.
Press the A or T outton, tnen press the ENTERI_ button. Select Air, Cable or Auto.
Press the A or T outton, tnen press the ENTERE_ button. Select the channel source
to memorize, When settlnc,me antenna source to Cable, a step appears allowing you to
asstgn numencat vatues/channel freauencies to the channels. For more information, refer to
Channel- Auto Program (p. 16),
Press tne rNTFR[_ DUttOnat any time to interrupt the memorization process.
Set the Clock Mode automatica yor manually.
Auto: Allows ,ou to select DST (Daylight Saving Time) mode and time zone.
• Manual: Allows outc manuat y set the current date and time (p. 26),
The connection method for the best HD screen quality is displayed.
0 English
Connections
Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver
HDM] CaMe
(Not Supplied/
HDM_ _N I(DV 0, 2(ARC}, 3, 4, PC/DVI AUDIO _N
" For better picture and audio quality, connect to a digital device using an HDMI cable.
* An HDMI cable supports digital video and audio signals, and does not require an audio cable.
- To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
* The picture may not display normally (ifat all) or the audio may not work if an external device that uses an older
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
* Be sure to use an HDMI cable with a thickness of 14 mm or less.
* Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
occur.
* A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the
ethernet function via HDMI.
* This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the
ARC function issupported by the HDM_ _N2(ARC) port only,
- If3D Auto View is set to On, some functions such as mnternet@TV may be disabled. In this case, set
3D Auto View or 3D Mode to Off.
* The ARC function allows digital audio to output via the HDM_ _N2(ARC} port. It can be enabled only when the
TV is connected with an audio receiver that supports the ARC function.
English ii
Connections
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
Component Adapter
Red Blue Green
Video Cable
ed}
Red WhRe Yellow
For better picture quality, the Component connection is recommended over the A/V connection.
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link.
EX UNK: Oonnector for service only. :{
2 English
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
C
DIGITAL AUDIO OUT (OPTICAL}
" When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL} jack, decrease the volume
of both the TV and the system,
" 5,1 OH (channel) audio is available when the TV is connected to an external device supporting 5.1 OH,
" When the receiver (home theater) is set to on, you can hear sound output from the TV's optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 OH sound to the home theater receiver, When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to
hear 5,1 OH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theater.
AUDmOOUT: Connects to the audio input jacks on your amplifier/DVD home theater.
" When connecting, use the appropriate connector,
" When an audio amplifier isconnected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier's volume control.
Eng,ish13
Connections
Using an HDMI/DVI cable or a D-sub cable
Display Modes (D-Sub and HDMI/DVI input)
Optimal resolution is 1920 X 1080 @60 Hz.
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT / DTV CEA
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
720 x 576
1152 x 864
1280 x 720
1280 x 960
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1280 x 720
1280 x 1024
1920 x 1080p
31.469
31.469
35.000
49.726
68.681
35.910
53.783
56.456
75.231
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
52.500
74.620
67.500
70.086
70.087
66.667
74.551
75.062
59.950
59.959
74.777
74.857
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
70.000
70.000
60.000
25.175
28.322
30.240
57.284
100.000
32.750
81.750
95.750
130.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
89.040
128.943
148.500
+/-
-/+
-/+
-/+
_/+
_/+
+/+
+/+
+/+
+/+
+/+
+/+
+/+
+/+
_/+
_/+
+/+
+/+
-/+
_/+
_/+
_/+
+/+
NOTE
* For HDMI/DVI cable connection, you must use the HDM_ _NI(DV_)jack.
* The interlace mode is not supported.
* The set may operate abnormally ifa non-standard video format is selected.
* Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
4 English
Edit Name
Source List
Use to select TV or an external input sources such as a DVD
/ Blu-ray player / cable box / STB satellite receiver.
[_ MENU _ input --_ Source List --_ ENTERI_
Im
TV / PC / AV / Component / HDMI1/DVI / HDMI2 /
HDMI3 / HDMI4 / USB
You can only choose external devices that
are connected to the TV. In the Source List,
connected inputs will be highlighted.
In the Source List, PC is always activated.
Basic Features
Before using the T_, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
(_ MENU _ input _ Edit Name _ ENTERI_
VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPrv / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier.
When a PC with a resolution of 1920 x 1080 @60Hz is
connected to the NDM_ _N I(DV_} port, you should set
the TV to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the NDM_ _N
I(DVl) port, you should set the TV to DVI PC or DVI
Devices mode under Edit Name.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
MENU The main menu options appear on
O MENU button: Displays the main on-screen menu.
ENTERE_ / Direction button: Movethe cursor and
select an item. Confirm the setting,
EXiT button: Exits the on-screen menu.
O RETURN button: Returns to the previous menu.
..... theinput,Picture,Sound, Channel, Setup,scrApplication,can: Support.
Select an icon with the A or _'
button.
Press ENTERI_ to access the
sub-menu.
Select the desired submenu with
the A or • button.
Adjust the value of an item with the
4 or _- button. The adjustment in
the OSD may differ depending on
the selected menu.
Press ENTERI_ to confirm the
selection.
Press EXIT.
English 15
Basic Features
Using Favorite Channels
Seeing Channels
Channel List
Add, delete or set Favorite channels and use _;
the program guide for digital broadcasts.
(_ MENU _ Channel --_Channel List --_ C
ENTER
Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen by
pressing the A / _ and ENTERIZ_ buttons.
Then you can watch the selected channel.
m {_HAII Channels: Shows all currently available channels.
Ill _Added Channels: Shows alladded channels.
Ill _ Favorite: Shows allfavorite channels.
Ill _ Programmed: Shows all currently reserved
programs.
Using the color buttons with the Channel List
" @Red (Antenna): Switches to Air or Cable.
" [3Green (Zoom): Enlarges or shrinks a channel
number.
" _ Yellow (Select): Selects multiple channel lists,
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
_/ mark appears to the left of the selected channels.
" O (Page): Move to next or previous page.
. _-_ (Tools): Displays the Channel List option menu.
(The options menus may differ depending on the
situation.)
Channel Status Display Icons
(_ MENU --_ Channel _ Channel List --_ ENTERI_
Add to Favorite / Debte from Favorite
Set channels you watch frequently as Favorites,
1. Select a channel and press the TOOLS button.
2. Add or delete a channel using the Add to Favorite or
Delete from Favorite menu respectively.
To show all Favorite channels, click on
the button shown on the right.
Memorizing Channels
(_ MENU --_ Channel _ ENTERI_
Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i,e. an Air or a Cable system).
Auto Program
Ill Air: Air antenna signal.
Ill Cable: Cable antenna signal.
Ill Auto: Air and Cable antenna.
_/ A channel selected.
V A channel set as a Favorite.
(_) A reserved Program.
6 English
NOTE
*WhenselectingtheCableTVsystem:STD,HRC
andIRCidentifyvarioustypesofcableTVsystems.
Contactyourlocalcablecompanytoidentifythe
typeofcablesystemthatexistsinyourparticular
area.Atthispoint,thesignalsourcehasbeen
selected.
*Afteralltheavailablechannelsarestored,itstarts
toremovescrambledchannels.TheAutoProgram
menuthenreappears.
Editing Channels
(_ MENU _ Channel --_Channel List --_ ENTERI_
Channel Name Edit
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu.
Ill Channel Name Edit (analog channels only): Assign your
own channel name.
Other Features
(_ MENU _ Channel --_ENTERI_
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20-30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTERE_ button to select Stop.
2. Press the _ button to select Yes.
3. Press the ENTER_ button.
This function is only available in Cable mode.
Channel List
Channel List Option Menu
Set each channel using the Channel List menu options (Add
/ Delete, Timer Viewing, Select All / Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
ml Add / Delete: Delete or add a channel to display the
channels you want.
NOTE
* All deleted channels will be shown on the All
Channels menu.
* A gray-colored channel indicates the channel
has been deleted.
* The Add menu only appears for deleted
channels.
* Delete a channel from the Added Channels or
Favorite menu in the same manner.
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
1. Press the _ / !_ / A / V" buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select Timer
Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote to enter
the date and time.
Ifyou selected Once, Every Week or EveryDay
in Repeat you can enter the date you want.
4. Select OK, then press the ENTERI_ button when
done.
NOTE
* Only memorized channels can be reserved.
* Reserved programs will be displayed in the
Programmed menu.
* When a digital channel is selected, press the !_
button to view the digital program.
Select All: Select all the channels in the channel list.
m
m
Deselect All: Deselect all the selected channels.
You can only select Deselect All when one or
more channels are selected.
Programmed .....................................................................................................................................................................
(inChannel List)
You can view, modify or delete a show you have reserved
to watch, Programmed timer viewing is displayed here,
Highlight a program and press the TOOLS button to display
Options,
Ill Change Info: Change a show you have reserved to
watch, Begin with step 3 of "Timer Viewing" above.
ml Cancel Schedules: Cancel a show you have reserved
to watch.
This deletes the highlighted or selected
program(s),
English 17
Basic Features
im
information: Display a show you have reserved
to watch. (Youcan also change the reservation
Information.)
Alternatively, you can view Information by
highlighting a program and pressing the
ENTERI_ button.
im
Select All / Deselect All: Select or deselect all reserved
programs.
Fine Tune
(analog channels only)
Ifthe reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation, Ifthe signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear,
Settings are applied to the channel you're currently
watching.
Fine tuned channels that have been saved are marked
with an asterisk .....on the right-hand side of the
channel number in the channel banner.
To reset the fine-tuning, select Reset,
Adjusting Picture Settings
{_ MENU _ Picture _ ENTERI_
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
Yourtelevision hasseveral setting options for picture quality
control.
NOTE
When you make changes to Backlight, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
* In PC mode, you can only make changes to
Backlight, Contrast and Brightness.
* Settings can be adjusted and stored for each
external device connected to the TV.
Economical Solutions
The Eco Function can be used to enhance your power
savings.
Eco Solution
Changing the Preset Picture Mode
{_ MENU _ Picture -_ Mode -_ ENTERE_
Mode
Select your preferred picture type.
Ill Dynamic: Suitable for a bright room.
Ill Standard: Suitable for a normal environment.
Ill Natural: Suitable for reducing eye strain.
Natural is not available in PC mode.
Ill Movie: Suitable for watching movies in a dark room.
(_ MENU _ Picture _ Eco Solution _ ENTERE_
Energy Saving (Off / Low / Medium / High / Picture
Off / Auto): This adjusts the brightness of the TV in
order to reduce power consumption. Ifyou select
Picture Off, the screen is turned off, but the sound
remains on. Press any button except the volume button
to turn on the screen.
Ill Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
If you adjust the Backlight, the Eco Sensor will
be set to Off.
Min Backlight: When Eco sensor isOn, the minimum
screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending on the surrounding light intensity.
Ill No Signal Power Off (Off / 15 min. / 30 min. / 60
min.): To avoid unnecessary energy consumption,
set how long you want the TV to remain on if it's not
receiving a signal.
Disabled when the PC is in power saving mode.
8 English
Changing the Picture Options
Advanced Sett!ngs .......................................................................................................................................................
(_ MENU _ Picture _ Advanced Settings
ENTER 1_
(Advanced Settings are available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance, LED Motion
Plus.
m
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
m
Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
m
Shadow Detail (-2~+2): Increase the brightness of dark
images.
m
Gamma: Adjust the primary color intensity.
m
Expert Pattern (Off / Pattern1 / Pattern2): By
running the Expert Pattern function, the picture can
be calibrated. Ifthe OSD menu disappears or a menu
other than the Picture menu is opened, the calibration is
saved and the Expert Pattern window disappears.
Off: Turns the Expert Pattern function off.
Pattern1 : This is a test screen designed to demonstrate
the affects of display settings on shades.
Pattern2: This is a test screen designed to demonstrate
the affects of display settings on colors.
After selecting Pattern1 or Pattern2, you can
adjust any of the advanced settings to the desired
effect.
While the Expert Pattern is running, sound is not
output.
Only enabled in DTV, Component and HDMI
modes.
[] RGB Only Mode (Off / Red / Green / Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
[] Color Space (Auto / Native / Custom): Adjust the
range of colors available to create the image. To adjust
Color, Red, Green, Blue and Reset, set Color Space
to Custom.
[] White Balance: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
[] 10p White Balance (Off / On): Controls the white
balance in 10 point intervals by adjusting the red, green,
and blue brightness.
Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
Some external devices may not support this
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
[] Flesh Tone: Emphasize pink "Flesh Tone."
[] Edge Enhancement (Off/On): Emphasize object
boundaries.
xvYCC (Off/On): Setting the xvYCC mode on
increases detail and color space when watching movies
from an external device (e.g. BD/DVD player) connected
to the HDMI or Component IN jacks.
Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
Some external devices may not support this
function.
LED Motion Plus (Off / On): Removes drag from fast
scenes with a lot of movement to provide a clear picture.
English lg
Basic Features
MENU _ Picture _ Picture Options _ ENTER[_
In PC mode, you can only make changes to the Color
Tone, Size and Auto Protection Time.
Ill Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
Settings can be adjusted and stored for each external
device connected to an input on the TM
Ill Size: Your cable box/satellite receiver may
have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most ofthe time. pc,SIZE
16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Usefor moderate magnification.
Zoom2: Usefor a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the
picture to fit the entire screen.
Available with HD 1080i / 720p signals in 16:9
mode.
4:3 : Sets the picture to basic (4:3)mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
NOTE
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the !_ button to select Position.
2. Press the ENTERC_ button.
3. Press the A or T button to move the picture up
or down.
4. Press the ENTERIZ_ button.
5. Press the !_ button to select Reset.
6. Press the ENTERIZ_ button to reset the picture
to its default position.
* After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the _ or I_ button to select Position.
2. Press the ENTERI_ button.
3. Press the A, _, _ or I_ button to move the
picture.
4. Press the ENTERIZ_ button.
5. Press the _ or I_ button to select Reset.
6. Press the ENTERI_ button.
* HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
* Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
ATV,AV, 16:9, Zoom1,
Component (480i, 480p) Zoom2, 4:3
DTV(1080i), 16:9, 4:3, Wide Fit,
Component (1080i, 1080p), Screen Fit
HDMI (720p, 1080i, 1080p)
PC 16:9, 4:3
Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualization): Ifthe broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
When the signal isweak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
Only available for analog channels.
When bar is green, you are receiving the best
possible signal.
0 English
Ill MPEGNoiseFilter(Off/ Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.
Ill HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
Available only in HDMI mode.
Ill Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
Available in TV, AV, COMPONENT (480i/1080i)
and HDMI (480i/1080i).
Ill Auto Motion Plus (Off / Clear / Standard / Smooth /
Custom / Demo): Removes drag from fast scenes with
a lot of movement to provide a clearer picture.
If noise occurs on the screen, please set the
Auto Motion Plus to Off. IfAuto Motion Plus
is Custom, you can set up the Blur Reduction,
Judder Reduction or Reset manually.
IfAuto Motion Plus is Demo, you can compare
the difference between on and off modes.
Blur Reduction: Adjusts the blur reduction level from
video sources.
Judder Reduction: Adjusts the judder reduction level
from video sources when playing films.
Reset: Reset the custom settings.
Ill Auto Protection Time (2 hours / 4 hours / 8 hours
/ 10 hours / Off): Set the time the screen remains idle
with a still image until the screen saver is activated. The
screen saver prevents the formation of ghost images on
the screen.
Viewing TV using the 3D function
(_ MENU --_ Picture _ 3D _ ENTERI_
IMPORTANT SAFETY INFORMATION. READ THE
FOLLOWING WARNINGS BEFORE YOU OR YOUR
CHILD USE THE 3D FUNCTION
Z_ WARNING
* As the TV turns on, the left and right sides of 3D
pictures may overlap more than usual. It may take
time until the picture quality is optimized,
* The 3D effect may be experienced differently
depending on the viewer. You may not notice the 3D
effect at all if you have a prescription for one eye that
isvery different from the other eye,
* Parents' careful supervision is required particularly
when children or teenagers view 3D images.
* Photosensitive Seizure Warning and Other Health
Risks
- Some viewers may experience an epileptic seizure
or stroke when exposed to certain flashing images
or lights contained in certain television pictures or
video games, Ifyou or any of your relatives has a
history of epilepsy or strokes, please consult with a
medical specialist before using the 3D function.
- Do not watch 3D pictures when you feel
incoherent, sleepy, tired or sick. Avoid watching 3D
pictures for many hours.
- Even those without a personal or family history
of epilepsy or stroke may have an undiagnosed
condition that can cause "photosensitive epileptic
seizures."
- If you experience any of the following symptoms
immediately stop watching 3D pictures and
consult a medical specialist: (1) altered vision; (2)
lightheadedness; (3) dizziness; (4) involuntary
movements such as eye or muscle twitching;
(5) confusion; (6) nausea; (7)loss of awareness;
(8) convulsions; (9) cramps; and/or (1O)
disorientation. Parents should monitor and ask
their children about the above symptoms-children
and teenagers may be more likely than adults to
experience these symptoms.
* Note that watching TV while sitting too close to the
screen for an extended period of time may weaken
your eyesight.
* Note that watching TV while wearing 3D Active
Glasses for an extended period of time may cause a
headache or fatigue. Ifyou feel headache, fatigue or
dizziness, stop watching TV and rest.
* Some 3D pictures may startle viewers. The pregnant,
elderly, epileptic and those suffering from serious
physical conditions are advised to avoid utilizing the
unit's 3D functionality.
* We don't recommend watching 3D if you are in bad
physical condition, need sleep or have been drinking
liquor.
English 21
Basic Features
* Please take care to be aware of the room around
you. This product is designed to be immersive. DO
NOT use this product near open stairwells, cables,
balconies, or other objects that can be tripped over,
run into, knocked down, broken orfallen over. Being
startled or deluding yourself into thinking that the 3D
images are real may cause you to crush a nearby
object or get injured trying to move your body.
* Do not use the 3D Active Glasses for any other
purpose than for which it was designed. Wearing the
3D Active Glasses for any other purpose (as general
spectacles, sunglasses, protective goggles, etc.)
may physically harm you or weaken your eyesight.
* Immersive video can potentially have adverse effects
on the user including motion sickness, perceptual
after effects, disorientation, eye strain, and
decreased postural stability. Take frequent breaks
to lessen the potential of these effects. If your eyes
show signs of fatigue or dryness or if you have any of
the above symptoms, immediately discontinue use
of this device and do not resume using it for at least
thirty minutes after the symptoms have subsided.
* The ideal viewing distance should be three times
or more the height of the screen. We recommend
sitting with viewer's eyes on a level with the screen.
* Do not disassemble, or attempt to repair or modify
your 3D active glasses by yourself.
- Do not use them if broken or damaged.
* Be careful not to let the temple ends of the 3D active
glasses harm your eye.
3D
This exciting new feature enables you to view
3D content. Inorder to fully enjoy this feature,
you must purchase a pair of Samsung 3D
Active Glasses (SSG-2100AB, SSG-2200AR,
SSG-2200KR) to view 3D video.
Samsung 3D Active Glasses are sold
separately. For more detailed purchasing
information, contact the retailer where you
purchased this TV.
S_MSUNG
3Demitter
If there is any obstacle between the emitter and 3D
Active Glasses, the proper 3D effect may not be
obtained.
3D Mode: Select the 3D input format.
If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select 3D
Mode from the list below that provides the best
3d viewing experience.
When watching 3D images, turn on 3D Active
Glasses.
Off Turns the 3D function off.
2D _ 3D Changes a 2D image to 3D.
Side by Side each other.
Top & Bottom another.
Line by Line and right eye alternately in rows.
Vertical Stripe left and right eye alternately in
Checker Displaysthe images for the
Board
Frequency left and right eye alternately in
"Side by Side" and "Top & Bottom" areavailable
when the resolution is 720p, 1080i and 1080p in
DTV, HDMI and USB mode or when set to PC
and the PC is connected through an HDMI/DVI
cable.
"Vertical Strip", "Line by Line" and "Checker
Board" are available when the resolution is set to
PC and the PC is connected through an HDMI/
DVI cable.
"Frequency" displays the frequency (60Hz only)
when the resolution is set to PC.
3D _ 2D (Off / On): Displays the image for the left eye
only.
This function is deactivated when 3D Mode is set
to "2D _ 3D" or Off.
3D View point: The overall adjustment of 3D
perspective.
This function is deactivated when 3D Mode is set
to "2D _ 3D" or Off.
Depth: Adjusts focus / depth in "2D _ 3D" mode.
This function is only activated when the 3D Mode
is "2D _ 3D",
Picture Correction: Adjusts the images for the left and
right eye.
Displays two images next to
Displays one image above
Displays the images for the left
Displays the images for the
columns.
left and right eye alternately in
sixels.
Displays the images for the
frames.
2 English
m
3DAutoView(Off/ On): If 3D Auto View is set to On,
a "Side-By-Side" format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the Standard
HDMI 3D Format.
If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a
3D Mode using the 3D button or corresponding
menu.
Support resolution (16:9 only)
1280 x 720p 60 Hz
1920 x 1080i 60 Hz
1920 x 1080p 24 / 30 / 60 Hz
Ill 3D Optimize: The overall adjustment of 3D effect.
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x
1080 input.
An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.
How to watch the 3D image
1. Press the CONTENT button, then the Content View
menu will appear.
2. Press the _ or I_ button, then select 3D.
Towatch in 3D, wear 3D Active Glasses and press the
power button on the glasses.
3. Select OK, then press the ENTERI_ button.
4. Using the _ or I_ buttons on your remote control, select
the 3D Mode of the image you want to view.
Some 3D modes may not be available depending
on the format of the image source.
Supported formats and operating specifications for
Standard HDMI 3D
The 3D formats indicated below are recommended by
the HDMI association and must be supported.
i_ ifo:at ::
1920xl080p@24Hzx 2 1920x2205p@24Hz
1280x720p@60Hzx 2 1280xl470p@60Hz
The mode is automatically switched to 3D in one of the
source signal formats above.
For the Standard HDMI 3D format with 24Hz, the TV is
optimized asfollows:
- Resolution First Display Mode: IfAuto Motion Plus
is set to Off, Clear or Standard, you can watch the
video at a high resolution optimized to the resolution
of the source video.
- Judder Reduction Display Mode: When Auto
Motion Plus isset to Smooth or Custom, you can
watch a smooth picture without judder.
Before using 3D function...
NOTE
* You may notice asmall amount of screen flickering
when watching 3D images in poor light conditions
(from a strobe light, etc.), or under a fluorescent lamp
(50Hz - 60Hz) or 3 wavelength lamp. If so, dim the
light or turn the lamp off.
* 3D mode is automatically disabled in following cases:
when changing a channel or the input source, or
accessing Media Play or Internet@TV.
* Some Picture functions are disabled in 3D mode.
* The Touch Remote does not support 3D pictures.
* 3D Active Glasses from other manufacturers may not
be supported.
* When the TV is initially powered on, it may take some
time until the 3D display is optimized.
* The 3D Active Glasses may not work properly ifthere
is any other 3D product or electronic devices turned
on near the glasses or TV. Ifthere is a problem, keep
other electronic devices as far away as possible from
the 3D Active Glasses.
* Photos of Media Play are shown in "2D _ 3D"
mode only.
* Ifyou lieon your side while watching TV with 3D
active glasses, the picture may look dark or may not
be visible.
* Be sure to stay within the viewing angle and optimum
TV viewing distance when watching 3D pictures.
- Otherwise, you may not be able to enjoy proper 3D
effects.
English 23
Basic Features
Resets your current picture mode to its default setting&
Changing the Preset Sound Mode
Setting up the TV with Your PC
Set the input source to PC.
(_ MENU _ Picture --_ ENTER[_
Auto Adjustment ........................................................................................................................
Adjust frequency values/positions and fine tune the settings
automatically.
Not available when connecting with an HDMI/DVI cable.
Screen
II
Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
m
Position: Adjust the PO's screen positioning if it does
not fit the TV screen. Press the A or • button to adjust
the Vertical-Position. Press the _ or I_ button to adjust
the Horizontal-Position.
Ill image Reset: Resets the image to default settings.
Using Your IV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PCwill probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on "Control Panel" on the Windows start menu.
2. Click on "Appearance and Themes" in the "Control
Panel" window and a display dialog-box will appear.
3. Click on "Display" and a display dialog box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
• The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
• If avertical-frequency option exists on your display
settings dialog box, the correct value is "60" or "60 Hz".
Otherwise, just click "OK" and exit the dialog box.
(_ MENU --_ Sound _ SRS TheaterSound -+
ENTER I_
SRS TheaterSound
Ill Standard: Selects the normal sound mode.
Ill Music: Emphasizes music over voices.
Ill Movie: Provides the best sound for movies.
Ill Clear Voice: Emphasizes voices over other sounds.
Ill Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
Adjusting Sound Settings
(_ MENU --_ Sound -_ Equalizer -_ ENTERE_
Equalizer ........................................................................................................................................................................................................................
Adjusts the sound mode (standard sound mode only).
Ill Balance L/R: Adjusts the balance between the right and
left speaker.
Ill 100Hz / 300Hz / lkNz / 3kNz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
Ill Reset: Resets the equalizer to its default settings.
4 English
Sound Settings
(_ MENU _ Sound --_ENTER[_
SRS TruSurround HD (Off / On)
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head
Related Transfer Function) technology.
SRS TruDialog (Off / On)....................................................................................................................
(standard sound mode only)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly.
Preferred Language .............................................................................................................
(digital channels only)
DigitaI-TV broadcasts are capable of
simultaneous transmission of many audio
tracks (for example, simultaneous translations
of the program into foreign languages),
You can only select a language among
the ones being broadcasted.
Speaker Select (External Speaker / TV
Speaker) ............................................................................................................................
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited,
When Speaker Select is set to External Speaker.
* TV Speaker: Off, External Speaker: On
When Speaker Select is set to TV Speaker,
* TV Speaker: On, External Speaker: On
Ifthere is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (SonyPhilips Digital Interface)is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Ill Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF)format from the options PCM or Dolby Digital.
Ill Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms- 250ms),
Multi-Track Sound (MTS)
(analog channels only)
Ill Mono: Choose for channels that are
broadcasting in mono or if you are having
difficulty receiving a stereo signal. ¢_ilTS
Ill Stereo: Choose for channels that are
broadcasting in stereo.
Ill SAP: Choose to listen to the Separate
Audio Program, which is usually a foreign-
language translation.
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Sound Reset (OK/Cancel)
Reset all sound settings to the factory defaults.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Ill Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
English 25
Basic Features
Setting the On / Off Timer
Setting the Time
{_ MENU -_ Setup -+ Time -+ ENTERE_
Time
m
Clock: Setting the clock is for using various timer
features of the TV.
{_ The current time will appear every time you press
the _NFObutton.
Ifyou disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
- Auto: Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set
the time automatically.
- Manual: Setthe current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually.
Available only when Clock Mode is set to
Manual.
You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
DST (Daylight Saving Time) (Off/On): Switches the
Daylight Saving Time function on or off.
This function is only available when the Clock
Mode is set to Auto.
Time Zone: Select your time zone.
This function is only available when the Clock
Mode is set to Auto.
Using the Sleep Timer
{_ MENU _ Setup _ Time _ Sleep Timer
ENTER IZ_
m Sleep Timer _ : Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
To cancel the Sleep Timer, select Off.
{_ MENU _ Setup _ Time _ Timer 1 _ ENTERI_
You can set the TV to turn on automatically at a preset time.
Ill Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (Toactivate the timer with the setting you've
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to rv): Select Air or
Cable.
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
NOTE
" Ifthere is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
" When there is only one photo file in the USB,
the Slide Show will not play.
" Ifa folder name is too long, the folder cannot be
selected.
" Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.
6 English
Repeat:SelectOnce,Everyday,Mon~Fri,Mon~Sat,
Sat~SunorManualtosetatyouconvenience,Ifyou
selectManual,youcansetupthedayyouwantto
activatethetimer.
The,Jmarkindicatesthedayisselected.
AutoPowerOff(availableonlywhentheTVisturned
onbytheTimer):TheTVwillbeautomaticallyturnedoff
after3hoursofbeingleftidletopreventoverheating.
Locking Programs
(_ MENU _ Setup -_ Security -_ ENTERE_
Security
The PIN input screen appears, Enter your 4 digit PIN number.
Ill V-Chip: The V-Chip feature automatically locks out
programs that are deemed inappropriate for children.
The user must enter a PIN (personal identification
number) before any of the V-Chip restrictions are set up
or changed.
NOTE
* V-Chip is not available in HDMI, Component
or PC mode.
* The default PIN number of a new TV set is
"0-0-0-0".
* Allow All: Press to unlock all TV ratings.
* Block All: Press to lock all TV ratings.
V-Chip Lock (Off/On): You can block rated TV
Programs.
TV Parental Guidelines: You can block TV programs
depending on their rating. This function allows you to
control what your children arewatching,
- IV-Y: Young children / TV-Y7: Children 7 and over /
rV-G: General audience / rV-PG: Parental guidance
/ TV-14: Viewers 14 and over / TV-MA: Mature
audience
- ALL: Lock allTV ratings. / FV: Fantasy violence / V:
Violence / S: Sexual situation / L: Adult Language / D:
Sexually Suggestive Dialog
The V-Chip will automatically block certain
categories dealing with more sensitive material.
For example, if you block the TV-¥ category,
then TV-Y7 will automatically be blocked.
Similarly, ifyou block the TV-G category, then
allthe categories in the young adult group will
be blocked (TV-G, TV-PG, TV-14 and TV-MA),
The sub-ratings (D, L, S, V) work similarly. So,
if you block the L sub-rating in TV-PG, then
the L sub-ratings in TV-14 and TV-MA will
automatically be blocked.
MPAA Rating: You can block movies depending on
their MPAA rating, The Motion Picture Association of
America(MPAA) has implemented a rating system that
provides parents or guardians with advanced information
on which films are appropriate for children.
- G: General audience (no restrictions). / PG: Parental
guidance suggested. / PG-13: Parents strongly
cautioned, / R: Restricted. Children under 17 should
be accompanied by an adult. / NO-17: No children
under age 17./X: Adults only. / NR: Not rated.
The V-Chip will automatically block any
category that deals with more sensitive material.
For example, ifyou block the PG-13 category,
then R, N0-17 and X will automatically be
blocked.
Canadian English: You can block TV programs
depending on their Anglophone Canadian ratings,
- C: Programming intended for children under age 8. /
08+: Programming generally considered acceptable
for children 8 years and over to watch on their own.
/G: General programming, suitable for allaudiences.
/ PG: Parental Guidance./14+: Programming
contains themes or content which may not be
suitable for viewers under the age of 14. / 18+: Adult
programming.
The V-Chip will automatically block any
category that deals with more sensitive material.
For example, ifyou block the G category, then
PG, 14+ and 18+ will automatically be blocked.
Canadian French: You can block TV programs
depending on their French Canadian rating,
- G: General/8 ans+: Programming generally
considered acceptable for children 8 years and over
to watch on their own. / 13 ans+: Programming may
not be suitable for children under the age of 13. / 16
ans+: Programming is not suitable for children under
the age of 16. / 18 arts+: Programming restricted to
adults.
The V-Chip will automatically block any
category that deals with more sensitive material.
For example, ifyou block the 8 arts+ category,
then 13 arts+, 16 ans+ and 18 arts+ will
automatically be blocked also.
Downloadable U.S. Rating: Parental restriction
information can be used while watching DTV channels.
English 27
Basic Features
NOTE
* If information is not downloaded from the
broadcasting station, the Downloadable U.S.
Rating menu is deactivated.
* Parental restriction information is automatically
downloaded while watching DTV channels. It
may take several seconds.
* The Downloadable U.S. Rating menu
is available for use after information is
downloaded from the broadcasting station,
However, depending on the information from
the broadcasting station, it may not be available
for use.
* Parental restriction levels differ depending on
the broadcasting station, The default menu
name and Downloadable US Rating change
depending on the downloaded information.
* Even if you set the on-screen display to another
language, the Downloadable U.S. Rating
menu will appear in English only.
* The rating will automatically block certain
categories that deal with more sensitive
material.
* The rating titles (For example: Humor Level,.etc)
and TV ratings (For example: DH, MH, H,,etc)
may differ depending on the broadcasting
station.
m
Change PIN: The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter them. As
soon as the 4 digits are entered, the Confirm New
PIN screen appears. Re-enter the same 4 digits, When
the Confirm screen disappears, your PIN has been
memorized.
How to watch a restricted channel
Ifthe TV is tuned to a restricted channel, the V-Chip will
block it. The screen will go blank and the following message
will appear:
This channel is blocked by V-Chip. Please enter the PIN to
unblock.
Ifyou forget the PIN, press the remote-control buttons
in the following sequence, which resets the pin to "0-0-
0-0:" POWER (off) _ MUTE --_ 8 --_ 2 _ 4 _ POWER
(on)
Other Features
(_ MENU --_ Setup _ ENTERC_
Menu Language
Set the menu language.
1. Select Menu Language and press the ENTERI_
button,
2. Choose desired language and press the ENTERI_
button,
Choose between English, EspaSol and Fran_;ais,
Caption
(On-Screen Text Messages)
Ill Caption (Off / On): You can switch the
caption function on or off. If captions are not
available, they will not be displayed on the
The Caption feature doesn't work in
Component, HDMI or PC modes.
screen. __
Ill Caption Mode: You can select the desired
caption mode.
The availability of captions depends on the
program being broadcast.
Default / OO1~004 / Text1 ~Text4: (analog channels
only) The Analog Caption function operates in either
analog TV channel mode or when a signal is supplied
from an external device to the TV.(Depending on the
broadcasting signal, the Analog Caption function may or
may not work with digital channels,)
Default / Service1 ~Service6 / OO1~004 /
Text1 ~Text4: (digital channels only)The Digital Captions
function works with digital channels.
Service1~6 may not be available in digital caption
mode depending on the broadcast.
8 English
m
DigitalCaptionOptions:(digitalchannelsonly)
Size:OptionsincludeDefault,Small,Standardand
Large.ThedefaultisStandard.
FontStyle:OptionsincludeDefaultandStyles0to7.
ThedefaultisStyle0.
ForegroundColor:OptionsincludeDefault,White,
Black,Red,Green,Blue,Yellow,MagentaandCyan.You
canchangethecoloroftheletter.ThedefaultisWhite.
BackgroundColor:OptionsincludeDefault,White,
Black,Red,Green,Blue,Yellow,MagentaandCyan.
Youcanchangethebackgroundcolorofthecaption.
ThedefaultisBlack.
ForegroundOpacity:Thisadjuststheopacityoftext.
OptionsincludeDefault,Transparent,Translucent,Solid
andFlashing.
BackgroundOpacity:Thisadjuststheopacityof
thecaptionbackground.OptionsincludeDefault,
Transparent,Translucent,SolidandFlashing.
ReturntoDefault:ThisoptionsetseachSize,Font
Style,ForegroundColor,BackgroundColor,Foreground
OpacityandBackgroundOpacitytoitsdefault.
NOTE
* DigitalCaptionOptionsareavailableonly
whenDefaultandService1~Service6canbe
selectedinCaptionMode.
*Theavailabilityofcaptionsdependsonthe
programbeingbroadcasted.
*TheDefaultsettingfollowsthestandardssetby
thebroadcaster.
*TheForegroundandBackgroundcannotbeset
tohavethesamecolor.
*YoucannotsetboththeForegroundOpacity
andtheBackgroundOpacitytoTransparent.
Network (Network Type / Network Setup
/ Network Test / SWL(Samsung Wireless
Link} / SWL connect}
For details on set up options, refer to the "Network
Connection" instructions (p. 32).
General
m Game Mode (Off / On): When connecting to a game
console such as PlayStation TM or XboxTM, you can enjoy
a more realistic gaming experience by selecting the
game menu.
NOTE
* Precautions and limitations for game mode
- To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
- If you display the TV menu in Game Mode, the
screen shakes slightly.
* Game Mode is not available when the input source
is set to TV or PC.
* After connecting the game console, set Game Mode
to On. Unfortunately, you may notice reduced picture
quality.
* IfGame Mode is On:
- Picture mode is set to Standard and Sound mode
is set to Movie.
- Equalizer is not available.
m BD Wise (Off / On): Provides the optimal picture quality
for Samsung DVD, Blu-ray and Home Theater products
which support BD Wise, When BD Wise isturned On,
the picture mode is automatically changed to the optimal
resolution.
Available when connecting Samsung products
that support BD Wise through a HDMI cable.
m Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
m Slide Key (On / Off): You can choose to use the LED
touch pad, which is centered underneath the stand, or
not.
m Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
Melody is disabled when FastStart is On.
m FastStart (Off / On): When the TV is powered on, the
screen will come on quickly with this feature.
English 29
Basic Features
Wireless Remote Control (Off / On}
Turn on/off or give permission to Samsung mobile phones/
devices.
You must have a Samsung Mobile phone/device which
supports Wireless Remote Control. For more details, refer
to each device's manual.
MENU _ Support -_ ENTER E_
Legal Notice .................................................................................................................................................................................................
The Legal Notice may differ depending on the country.
Ill Signal Information: (digital channels only) An HD
channel's reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
Ill Troubleshooting: If the TV seems to have a problem,
refer to this description.
If none of these troubleshooting tips apply, contact
the Samsung customer service center.
Software Upgrade ........................................................................................................................................................
Software Upgrade can be performed by network
connection or downloading the latest firmware from "www.
samsung.com." to a USB memory device.
Current Version - the software already installed in the TV.
Software is represented as "Year/Month/DayVersion."
Self Diagnos!s .....................................................................................................................................................................................
Self Diagnostic might take few seconds, this is part of
the normal operation of the TV.
II Picture Test: Use to check for picture problems.
Yes: Ifthe test pattern does not appear or there is
noise in the test pattern, select Yes, There may be a
problem with the T_, Contact Samsung's Call Center for
assistance (1-800-SAMSUNG),
No: Ifthe test pattern is properly displayed, select No,
There may be a problem with your external equipment.
Please check your connections, If the problem persists,
refer to the external device's user manual.
Ill Sound Test: Use the built-in melody sound to check for
sound problems,
Ifyou hear no sound from the TV's speakers,
before performing the sound test, make sure
Speaker Select is set to TV Speaker in the
Sound menu.
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
Yes: Ifyou can hear sound only from one speaker or not
at all during the sound test, select Yes, There may be a
problem with the T_, Contact Samsung's Call Center for
assistance (1-800-SAMSUNG),
No: Ifyou can hear sound from the speakers, select No.
There may be a problem with your external equipment.
Please check your connections, If the problem persists,
refer to the external device's user manual.
Installing the Latest Version
StandSidePanel
USB Drive
By USB: Insert a USB drive containing the firmware
upgrade file, downloaded from "www.samsung.com,"
into the TM Please be careful not to disconnect the
power or remove the USB drive until upgrades are
complete. The TV will be turned off and on automatically
after completing the firmware upgrade. When software is
upgraded, video and audio settings you have made will
return to their default settings. We advise you to to write
down your settings so that you can easily reset them
after the upgrade.
0 English
Loading...