Samsung UN40B6000 - 40"" LCD TV, UN46B6000 - 46"" LCD TV, UN55B6000 - 55"" LCD TV, UN40B6000VF, UN46B6000VF Quick Setup Manual

English - 1

The Supplied Accessoris

(M4xL10) (M4xL12)

Remote Control &

Batteries (AAA x 2)

Cleaning Cloth Stand Screw (X5)

UN32B6000, UN40B6000,

UN46B6000

Stand Screw (X4)

UN32B6000

Holder-Wire (3ea) Cover-Bottom Holder-Ring (4ea) Holder-Wire Cable

(Depending on the model)

(M8xL19)

TV-Holder & Screw (X1)

(Depending on the model)

Holder-Wire stand Warranty Card /

Safety Guide

Installing Batteries in the Remote Control

STOP

Please do not return

this unit

If you are having problems operating

this TV,

Please call;

1-800-SAMSUNG (1-800-726-7864)

For web support please visit

www.samsung.com/support

1-800-SAMSUNG (7267864)

Samsung Electronics America, Inc.

105 Challenger Road Ridgefi eld Park, NJ 07660-0511

Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Call center hours of operation (Mon-Sun 9AM-12AM EST).

To register this product please visit

www.samsung.com/global/register.

Quick Setup Guide

English - 2

Assembling the Cables

Stand Type

Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent stand.

Wall-Mount Type

Preparing before installing Wall-Mount

To install a wall-mount from another manufacturer, use the
Holder-Ring 1.

❑

N

❑

1

3

2

1

3

2

1

1

1

English - 3

Viewing the Menus

Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.

Operation the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1. Press the MENU button.

2. The main menu appears on the screen. The menu’s left side has icons : Picture, Sound,
Channel, Setup, Input, Application, Support.

3. Press the ▲ or ▼ button to select one of the icons.

4. Then press the ENTERE button to access the icon’s sub-menu.

5. Press the ▲ or ▼ button to select the icon’s submenu.

6. Press the ◄ or ► button to decrease or increase the value of a particular item. The

adjustment OSD may differ depending on the selected menu.

7. Press the ENTERE button to complete the confi guration.

8. Press the EXIT button to exit.

❑

Mode : Standard ▶

Backlight : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Advanced Settings

Picture

Mode : Standard

Backlight : 7 ▶

Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Advanced Settings
Picture Options

Picture

7

U

Move L Adjust E Enter R Return

▲

Backlight

▼

Help icon

MENU Button

Display the main on-screen menu.

ENTERE / DIRECTION Button

Move the cursor and select an

item. Select the currently selected

item. Confi rm the setting.

RETURN Button
Return to the previous menu.

EXIT

Exit the on-screen menu.

English - 4

Plug & Play

When the TV is initially powered on, basic settings proceed automatically and
subsequently.

Preset: Connecting the mains and antenna.

N

1. Press the POWERP button on the remote control.

You can also use the POWERP button on the TV.
The message Select Language of the OSD. is displayed.

2. Press the ENTERE button. Press the ▲ or ▼ button to select the language, then
press the ENTERE button. The message Select ‘Home Use’ when installing this

TV in your home. is displayed.

3. Press the ◄ or ► button to select Store Demo or Home Use, then press the
ENTERE button. The message Select the Antenna source to memorize. is

displayed.

We recommend setting the TV to Home Use mode for the best picture in your
home environment.

Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to

Home Use (Standard): Press the volume button on the TV. When the volume
OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

N
N

N

N
N

4. Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTERE button to select Start.

Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.

In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button,
then press the ENTERE button. If you have Digital cable, select the cable system signal source for both Analog and
Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.

5. Press the ENTERE button to select Start. The TV will begin memorizing all of the available channels.

To stop the search before it has fi nished, press the ENTERE button with Stop selected.

After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.
Press the ENTERE button when channel memorization is complete. The message Set the Clock Mode. is displayed.

6. Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then Press the ENTERE button. The message Set to
daylight saving time. is displayed. If you select Manual, Set current date and time. is displayed.

7. Press the ▲ or ▼ button to select Off, On or Auto, then press the ENTERE button.

8. Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTERE button. If you have received a

digital signal, the time will be set automatically. If not, refer to the ‘Setting the Time’ instructions to set the clock.

9. The description for the connection method providing the best HD screen quality is displayed. Check the description and press

the ENTERE button.

10. The message Enjoy your TV. is displayed. When you have fi nished, press the ENTERE button.

If you want to reset this feature...

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTERE button.

3. Press the ENTERE button again to select Plug & Play.

The Plug & Play feature is only available in the TV mode.

N
N

N
N

❑

N

Plug & Play

Select Language of the OSD.

Menu Language : English ▶�

E

Enter

English - 5

Connecting a AV device

HD connection

Using an HDMI Cable

Best

Normal

HD connection

Using a DVI Cable

AUDIO OUTDVI OUT

AUDIO OUTDVI OUT

or

WY R

W YR

W R

WR

B

G

R

WR

W R

WY R

W YR

B

G

R

W R

WR

/

HDMI/DVI

/

PC/COMPONENT

VIDEO

DVD / Blu-Ray player / Cable Box

/ Satellite receiver (STB)

DVD / Blu-Ray player / HD Cable

Box / HD Satellite receiver (STB)

HDMI OUT

Audio/Video connection

Using an Audio/Video Cable

Component connection

Using a Component Cable

VCR

AUDIO OUTVIDEO OUT

DVD / Blu-Ray player /

Cable Box / Satellite receiver

AUDIO OUT COMPONENT OUT

English - 6

Connecting an audio device

Connecting a PC

OPTICAL (Digital)

AUDIO (Analog)

Best

Normal

HD connection

Using an HDMI Cable

Using a D-Sub Cable

HD connection

Using an HDMI/DVI Cable

W R

WR

Digital Audio connection

Using an Optical Cable

Digital Audio System

OPTICAL

Analog Audio connection

Using a Audio Cable

Amplifi er / DVD Home Theater

AUDIO IN

HDMI OUT

PC OUTAUDIO OUT

DVI OUT

AUDIO OUT