Samsung UN46F6300AFXZA-TS01, UN46F6300AFXZA, UN75F7100AFXZA, UN60F7100AFXZA, UN60F6400AFXZA Owner’s Manual
...
E-MANUAL
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model
Serial No..
e-Manual Guide
Viewing the e-Manual
1 Scrolling a Page
1 Using the Top Icons
1 Ret_rning to the Home Page
2 Searching the Index
2 Searching Pages
2 Closi _g the e-Manual
2 Jumping to a Menu item
2 Updating the e-Manual
Getting Started
Antenna Connection
Video Device Connections
4 HDMI Connection
5 Component Connection
5 AV Connection
Audio Device Connections
6 Digital Audio (Optical) Connection
7 Audio Output Connection
7 ARC (Audio Return Channel)
Computer Connection
8 HDMI Connection
9 HDMI-to-DVI Connection
Switching Between Video Sources
Channel Management
12 Remove Channels
Restore Removed Channels
13
13 Program Rating Lock
13 B ock ng Programs Usng the TV Rating
14 B ock ng based on Movie Rat J_g(MPAA)
14 Bockqg Based oJ_CanadiaJ_ Er_gsh Rating
15 B ock ng Based on Canadian French Rating
15 B ock ng Based on Downloadab e U,S, Ratir_g
15 Watching Bocked / Restr cted Programs
15
Rename Analog Channels
Favorite Channels
17 Add Favorite Channels
17 Remove Favorite Channels
18 Rearrange the Favorite Channels List
18 Rename a Favorite Channel List
18 Copy a Favorite Channels List
Network Configuration
19 Wired Network
20 Wireless Network
20 PDP 5500, LED 5500 series aJ_dabove
20 LED 4300 Series modes
21 Wire ess Network Precautions
21 Network Secur ty Protocols
Wired Network Setup
22 Automatic Wired Network Setup
22 Manual Wired Network Setup
24 Failed Wired Connection
Wireless Network Setup
25 Automatic Wireless Network Setup
Programming
11 Auto Program
11 Remove Scrambled Channels
26 Manual Wireless Network Setup
28 Using the WPS Button
28 Failed Wireless Connection
29 Dynam}c versus Static P Addresses
Checking the Network Status
Mobile Device Connection
31 Wi-Fi Direct
31 AIIShare Settings
31 Rename the TV
Controlling the TV
Smart Touch Control
32 Inserting the Batteries (AAA X 2)
32 Connecting to the TV
33 Reconnecting the Smart Teuch Contro
33 Battery Low Alarm
34 Buttons and Descriptions
36 Special Functions
Using the touch pad
37 Dragging
37 Pressing
38 Flicking
38 Pressing and Holding
38 Pressing and Dragging
39 Scrolling Up/Down
39 Scrolling Left/Right
40 Changing Channels by Entering Numbers
40 Numerca nputGuide
40 Adjusting the Touch pad
41 Show Status and Notification Banner
41 Recommended
41 History
41 Delet ng History Data
41 Searching
Virtual Remote Control
Entering Text using the Onscreen Keypad
45 Entering Text using the QWERTY Keypad
45 Addit ona Features
SMART Interaction
46 Precautions
46 Face Recognition
46 TV Camera Use
47 Mot}on Control
47 Voice Recoonit on
Voice Recognition
48 Operating Environment
49 Enabling Voice Recognition
49 Voice Recognition Tutorial
49 Basic Voice Recognition Use
49 Voice Recognition Settings
50 Interactive Voice Recognition Commands
50 Deactivating Voice Recognition
Motion Control
51 Operating Environment
52 Motion Control Environment Test
52 Motion Control Tutorial
52 Motion Control Activation
53 Using the Basic Motion Controls
53 Motion Control Options
54 Motion Control Screen
54 [he Screen Compos tion while V[ewir_9 TV
55 The Smart Hub Screen Composition
42 Changing the Virtual Remote Control Panel
42 Change a position of the Virtual Remote Panel
42 Using the Number Panel
42 Using the Playback Control Panel
42 Using the Quick Access Panel
42 Adjusting the virtual remote control
Universal Remote Setup
43 Connecting the IR Extender
44 Add the External Device
44 Using the Universal Remote Control
44 Registered External Device Management
Face Recognition
57 Operating Environment
58 Face Registration
58 Face Registration from the Smart Hub accouter nformat on
screen
59 Face Registrar on for the Smart Hub account usis9 face
recognition
59 Face Recognition Login
Using Peripheral Devices
60 Keyboard Connection
60 Keyboard Use
61 Mouse Connection
61 Mouse Use
TV Viewing TV Settings
TV Viewing
62 Program Info
62
Change the Broadcast Signal
63 Guide
63 Cha _ge Channels
63 Change Category
63 Quick Nay gatior
64 Schedu e Viewing
64 Check ng the Program nfo
65
Channel List
65 Change Channels
65 Genre
66 Change the Broadcast Signal
66 Change the Channe Lst
Schedule Viewing
67 Digital Channel Schedule Viewing
68 Gide
68 Program nfo
68 Analog Channel Schedule Viewing
68 Cancel a Schedule Viewing
68 Edit Schedule List
Basic Picture Settings
76 Changing the Picture Mode
77 Picture Quality
77 Applyi _g the Current Picture Quality Setti _g to/t_,J_ot_er
nput
78 Picture Size
79 Screen Position
79 Picture Off
79 Reset Image Settings
Advanced Settings
Picture Options
Basic Sound Settings
84 Changing the Sound Mode
85 Adjusting the Sound Settings
85 Auto Volume
85 TV Installation Type
85 Resetting the Sound
3D TV
69 Precautions
70 Restrict oJ_s
70 Tips
71 Activating 3D Mode
71 Setting 3D Effects
PiP
Analog Screen Calibration
73 Fine Tune
Broadcast Audio Options
74 Digital Broadcast Audio Options
74 Analog Broadcast Audio Options
Sports Mode
Subtitles
75 Show Subtitles
75 Subtitle Options
75 Subtitle Display Options
3D Audio
Speaker Settings
87 Speaker Select
88 Digital Audio Output
88 Samsung Audio Device Connection
Clock and Timer
89 Setting the Time
90 A£o
90 Manual
90 Sleep Timer
91 On Timer
91 Off Timer
Screen Protection and Maintenance
92 Eco Solution
93 Screen Burn Protection
93 Pixel Shift
93 A to Protection Trne
94 Scrolling
94 Side (}ray
94 Auto Protection Time
Password
95 Change Password
Additional Features
96 Changing the Menu Language
96 Game Mode
96 Precaut ons and Restrictions
97 BD Wise
97 Menu Transparency
97 Sound Feedback
97 Panel Locking
97 Booting Logo
97 DivX@ Video On Demand
SMART TV Features
Smart Hub
98 Agreements Required to Use Smart Hub
99
Samsung Account
99 Creatirg a Sams ng AccoLnt
99 Logging In
100 terms and Conditions Privacy Policy
100 Linking a Samsung Account to Ot-_er Accounts
100 Managing AccoLnts
101 Resetting Smart Hub
Searching
101 Keyword Search
101 Setting Search Scope
Status and Notification
102 Show Status and Notification Banner
102 Voice Recognit}on & Motion Contro Config_Jation
102 Samsung Account Configbration
102 Network Configuration
102 Check Not f cations
Social
103 Social Settings
103 Checking the App caton
103 Connect J_9a Service to a Samsun9 Account
104 Watching Videos
104 Friend Profile
104 Video Calling a Friend
104 Filters
Apps
105 Precautions
106 Installing Standard Applications
106 Launching an Application
106 Samsung Apps
106
Searching for Apps
106
Insta ingApplcatons
107
Apps
Management
107
Ed}t My Apps
108
Delet ng App icat ons
108
Manag ng App ication Folders
108
Application Lock/Unlock
108
Application Update
109 Fitness
109 Creating a Prof e
109 Kids
110 WebBrowser
110 Social Networks
110 Linkisg Servce Accounts
111 Apps Settings
111 Auto Ticker
111 Push Not f cation Settings
111 Channel---Bound Apps
111 Properties
On TV
113 On TV Settings
113 On T-VSetup
113 Recommendation Notce
113 Auto Start
113 Recommendation Method
113 Adut Contents Bock
114 Watching an On-Air Recommended Program
114 Scheduled Recommended Program Info
114 Activating the Guide
114 Program Recommendations by Time
Movies & TV Shows
116 Buying Movies
116 Playing Movies
116 Parental Control
Photos, Videos & Music
117 Restrictions
118 Supported File Formats
118 USB Device Connection
118 USB Device Removal
119 Playing all the Content on a Storage Device
119 Clearing the Recent Playlist
119 Using Networked External Storage Devices
120 Allowing DLNA Device Connections
120 AIIShare
120 Exporting Contents
Videos
121 Changing the view mode
121 Playlist Creation
122 Opening a Different File
122 Video Scanning
123 Show Subtitles
123 Additional Video Playback Settings
Music
124 Changing the view mode
124 Playlist Creation
125 Music Scanning
125 Opening a Different File
125 Additional Music Playback Settings
Photos
126 Changing the view mode
126 Slide Show
126 Slide Show Settings
126 Playlist Creation
127 Opening a Different File
127 Background Music
127 Mini Player
127 Additional Photo Playback Settings
Anynet+ (HDMI-CEC)
128 Precautions
129 Anynet+ (HDMI-CEC) Setup
129 Using the Anynet+ (HDMI-CEC)
129 Switching between AJ_ynet_ Devces
130 AJ_ynet+ (HDM-CEC) Device Menu
130 ARC
Sharing Mobile Device Screens on the TV
131 Screen Mirroring
131 Moble Device Connecton
Other Information
Support
132 Remote Management
133 What }s Remote S_pport?
133 How Does it Work7
134 e-Manual
134 Self Diagnosis
134 Pct_e Test
135 Sound Test
135 Motion Control Envronment Check
135 Signa Erfformaton
135 Reset
136 Updating the Software
136 Update now
136 Auto Update
137 Usage Mode
137 Support Info
Subtitle and Media Contents file formats, and Codec
145 Subtitle
145 Externa
145 Er_terr_al
146 Supported image resolutions
146 Supported music file formats
147 Video Codec
147 Other Restrctions
148 Video Decoders
148 Audio Decoders
3D Precautions
149 Viewing guidelines
150 CAUTION!
151 SAFETY PRECAUTIONS
Licenses
Kensington Security Lock
Display Resolution
138 PDP 5500, LED 5500 series and above
138 BM
138 MAC
139 VESADMT
140 LED 4300 series models
140 BM
140 MAC
141 VESA DMT
Picture Size and Input Signal
Supported 3D Resolutions
143 HDMI
143 3D Format L/R, T/B
143 3D Format Frame Packing
144 Component
144 Digital Channel
144 Videos/Photos
144 HDMI PC Mode
Troubleshooting
Screen
Sound
3D TV
Antenna (Air/Cable) Connection
PC Connection
Networking
Miscellaneous
Anynet+ (HDMI-CEC)
Apps
Photos, Videos & Music
Reset the Personal Info and TV settings
Web Browser
Viewing the e-Manua
The embedded e-Manual contains information about your TV's key features.
Navigate to the screen menu and select e-Manual (Support > e-Manual (Troubleshooting)).
Select a category from the left side of the screen.
2. Select an item. The e-Manual will open on the page containing the selected information.
Words in blue refer to screen menu options and words in light blue refer to remote contro buttons,
Arrows are used to indicate the menu path_ (ExampIe: Screen Menu :> Support :>e-Manua_
Scrolling a Page
To scroll a page, use of one of the following methods:
PDP 5500, LED 6400 series and above
o Press the _ or _ button on the scroll bar at the right edge of the screen.
o Drag or flick up or down from the line on either the left or right edge of the touch pad. This
method is not available with LED 4300 - 6300 series.
o Place the focus on the _ or _ button at the right edge of the screen, drag or flick up or down
on the touch pad.
LED 4300 - 6300 series
o Press the _ or button on the scroll bar at the right edge of the screen.
o Place the focus on the _ or _ button at the right edge of the screen, press the up or down
arrow button on the remote.
Using the Top cons
Use the Back, Forward, and Opened pages icons on the top left of the screen to navigate through
pages. These icons are available when two or more pages are passed.
Returning to the Home Page
PDP 5500, LED 6400 series and above
To return to the home page, select the 191button on the virtual remote panel or select _ on the top
right of the screen.
To seect a Ietter button (i_1 D, @_,D), press the MORE button on the Smart Touch Control to display
a panel of the virtuat remote. Fick the Touch Pad until the P ayback Contro Pane appears, seect the a
button, and then press the Touch Pad.
LED 4300 - 6300 series
To return to the home page, press the 191button or select _ on the top right of the screen.
Searching the _ndex
PDP 5500, LED 6400 series and above
Select the D button on the virtual remote panel or select on the top right of the screen to display
the index. Select a term to display the page containing the term.
LED 4300 - 6300 series
Press the D button or select ,_ on the top right of the screen to display the index. Select a term to
display the page containing the term.
Searching Pages
PDP 5500, LED 6400 series and above
Select the 5_ button on the virtual remote panel or select Q on the top right of the screen, and enter
search criteria. Select a page from the list of search results to display it.
LED 4300 - 6300 series
Press the button or select Q on the top right of the screen, and enter search criteria. Select a page
from the list of search results to display it.
C_osing the e-Manua_
PDP 5500, LED 6400, 6800 and 7050/7100 series
To close the e-Manual, press and hold the RIETURINbutton or select X at the upper-right corner of the
screen.
LED 4300 - 6300 series
To close the e-Manual, press the IEXIT button or select X at the upper-right corner of the screen.
Jumping to a Menu totem
Todirectlyjumptothemenuitemthatisdescribedinthecurrentsection,select itispossible
to jump from a menu item directly to the related section in the e-Manual.
PDP 5500, LED 6400 series and above
On the screen menu, press the MORIE button on the Smart Touch Control and then select e-Manual on
the virtual remote panel that appears on the screen.
LED 4300 - 6300 series
On the screen menu, press the IEHMAIN(JAL button that appears on the screen.
This feature may not be avai able, depending on the menu.
Updating the e-Manual
Press the _ button and select Apps, and then select More Apps. The e-Manual can be updated in the
same way with an application update.
On the More Apps screen, select Update Apps, and then select e-Manual from the list. The e-Manual
starts updating to the latest version. However, Update Apps appears on the screen only when the
update is required.
Antenna Connection
Refer to the diagram and connect the antenna cable to the antenna input connector. Make sure that you
do not bend the cable. The number of connectors and their names and locations may vary depending
on the model.
Connect the correct antenna cable for your viewing environment (over-the-air or cable broadcasting).
However, an antenna connection is not necessary if you are using a cable box or satellite receiver.
The displayed image may differ depending on the model.
Video Device Connections
This TV has a wide range of connectors for video input from video devices such as Blu-ray players,
DVD players, camcorders and gaming consoles. Below is a list of featured connectors shown in
descending order of picture quality.
, HDMI
o Component
, AV
Connect the video device to the TV via an HDMI connector for the best picture quality. If the device
does not have an HDMI connector, try a component connector to get the next best possible picture
quality.
The number of connectors and their names and locations may vary depending on the model.
When connecting an external device, refer to the device's operating manual. The number of external
device connectors and their names and locations may vary depending on the manufacturer.
HDMI Connection
Refer to the diagram and connect the HDMI cable to the video device's HDMI output connector and the
TV's HDMI input connector. One of the following HDMI cable types is recommended:
o High-Speed HDMI Cable
o High-Speed HDMI Cable with Ethernet
Use an HDMI cable with a thickness of 14 mm or less. Using a non-certified HDMI cable may result in
a blank screen or a connection error.
Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications,
This TV does not support the HDMI Ethernet Channe,
The displayed image may differ depending on the model.
Component Connection
Connect the TV's component video and audio input connectors to the external device's component
video and audio output connectors using a component cable, so that the connectors of the same color
connect to each other, as shown in the figure.
The displayed image may differ depending on the model.
AV Connection
Refer to the diagram and connect the AV cable to the TV's external input connectors and the device's
AV output connectors. Certain models combine the external video input connector and the component
Y connector into a single connector. If this is the case, connect the video cable to the Y connector.
The displayed image may differ depending on the model.
Audio Device Connections
This TV has a wide range of connectors for audio input from devices such as amplifiers, Blu-ray
players and DVD players. For better audio quality, it is a good idea to use an AV receiver.
o Digital Audio (Optical)
Audio
ARC (Audio Return Channel)
The number of connectors and their names and locations may vary depending on the model.
When connecting an external device, refer to the device's operating manual. The number of external
device connectors and their names and locations may vary depending on the manufacturer.
Digital Audio (Optical} Connection
Refer to the diagram and connect the optical cable to the TV's digital audio output connector and the
device's digital audio input connector.
Connecting the device using an optical cable does not automatically turn off the TV speakers. To turn
off the TV speakers, open the Speaker Select (Sound > Speaker Settings > Speaker Select) menu,
then set External Speaker.
Adjust the audio device's volume using its remote control.
An unusual noise coming from the audio device while it is being used may indicate a problem with the
audio device itself. If this is the case, ask for assistance from the audio device manufacturer.
5.1-channel audio for digital channels is only available with broadcasts that support 5.1-channel audio.
The displayed image may differ depending on the model.
Audio Output Connection
Refer to the diagram and connect the audio cable to the TV's audio output connector and the device's
audio input connector.
The displayed image may differ depending on the model.
ARC (Audio Return Channel}
The ARC function is not available for LED 4300 and 5500 series model.
This TV supports 3D and ARC (Audio Return Channel) functions via an HDMI cable. ARC enables
digital sound to be output using just an HDMI cable. However, ARC is only available through the HDMI
(ARC) port and only when the TV is connected to an ARC-enabled AV receiver. Connect the HDMI
cable to the TV's HDMI (ARC) connector and the device's HDMI output connector.
The displayed image may differ depending on the model.
Computer Connection
This TV supports the HDMI/DVI port for connect the computer. Not all computers are HDMI-enabled.
In this case, use an HDMI-to-DVl cable to connect the computer to the TV. Refer to the "Display
Resolution" for information on the resolution settings supported to the TV.
HDMm Connection
Refer to the diagram and connect the HDMI cable to the TV's HDMI input port and the computer's
HDMI output port.
The displayed image may differ depending on the model.
HDM -to-DVm Connection
Refer to the diagram and connect the HDMI-to-DVI cable to the TV's HDMI (DVI) port and the
computer's DVl output port. The HDMI-to-DVl connection is available through the HDMI (DVl) port
only.
DVl cannot carry audio. To listen to the computer sound, connect the external speaker to the
computer's audio output connector.
The displayed image may differ depending on the model.
Switching Between Video
Press the SOURCE button to switch between devices connected to the TV.
For example, to switch to a game console connected to the second HDMI connector, press the
SOURCE button. From the Source list, select HDM_2. The connector names may vary depending on the
product.
Select Tools at the upper-right corner of the Source screen to access the following functions.
. Edit Narae: You can rename devices connected to the TV to more easily identify external sources.
With a computer connected to the TV's HDMI (DVI) port via an HDMI cable, for example, you can
change Edit Name to PC.
With a computer connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example,
you can change Edit Name to DW PC.
With an AV device connected to the TV's HDMI (DVl) port via an HDMI-to-DVI cable, for
example, you can change Edit Name to DW Devices.
. information: View detailed information about the connected devices.
. Refresh: Select this if a connected device does not appear in the list. If the list does not show the
device after selecting Refresh, check the status of the TV-to-device connection.
. Remove USB: Remove the USB device from the list to safely. This function is only available when
the USB device selected.
To add a new external device to control it with the Touch Remote Control, press the SOURCE button
and select Universal Remote Setup on the top right of the screen. Using the universal remote control,
users can control external devices connected to the TV, such as a set-top box, Blu-ray player, and AV
receiver. For details, see "Universal Remote Setup".
The UniversaJ Remote Setup funct on s not ava abe for LED 4300 series,
Programming
Scan and index available channels.
The dispIayed image may differ depending on the modet,
You can also remove channels from the index, restore removed channels and designate favorite
channels for a more convenient TV viewing experience. Programming is not necessary if you are
connected to a cable or satellite receiver.
Auto Program
Screen Menu > Broadcasting > Auto Program
Automatically scans and indexes all channels received through the TV's antenna input connector.
To start, navigate to Broadcasting and select Auto Program.
2. Select Start when prompted with a message. This initiates the Auto Program function. The
process can take up to 30 minutes to complete. If starting the Auto Program function when there
is an existing index of channels overwrites the previous index.
Remove Scrambled Channels
Screen Menu > Broadcasting > Channel Settings > Clear Scrambled Channel
Remove scrambled channels (ex: pay-per-view channels) from channel list. To remove scrambled
channels, run this function. This function is enabled only for cable TVs when at least one digital
channel is available.
Channel
Screen Menu > Broadcasting > Edit: Channel
The dispIayed image may differ depending on the modet,
Remove channels from the index, restore removed channels, and rename analog channels. The Edit
Channel screen icons indicate the following:
o " An analog channel
@ " A favorite channel
e " A locked channel
In the Edit Channel screen, select the virtual remote panel's or the regular remote's TOOLS button to
access the following options:
Antenna: Choose between Cable and Air.
o Category: The TV's channel index is divided into different categories such as All, Added Cho,
Recently Viewed and Mostly Viewed. Choose a category.
o Edit Favorites: You can designate frequently watched channels as favorites. For details, see
"Favorite Channels".
o information: View detailed information about the current program.
Remove Channels
Remove registered channels from the index. Removing channels appearing in the Recently Viewed or
Mostly Viewed list clears the channels from the list only and does not remove them from the index.
From the screen, select the channels you wish to remove. Unselect channels by choosing them
again.
2, Select the _} button on the virtual remote panel or press the _ button on regular remote control.
The selected channel(s) will be deleted.
Restore Removed Channels
Restore removed channels. Removed channels are displayed in gray on the ANI list. In addition, the Add
option is only available for removed channels.
From the screen, press TOOLS button. Select Category and then select ANI.
2_
From the All list, select the channels you wish to restore. Unselect channels by choosing them
again.
3_
Select the _ button on the virtual remote panel or press the #3 button on standard remote
control. The selected channel(s) will be added.
Program Rating Lock
Screen Menu > Broadcasting > Program Rating Lock
The Program Rating Lock blocks programs with ratings higher than those desired. This is useful for
controlling what children watch on TV. This will not function for programs originating from external
sources, such as DVD players or USB files.
This PIN is required to watch a blocked program.
The Program Rating Lock is available only in TV mode.
Blockin9 Programs Usin9 the IV Ratin9
To block content, select a rating entry to lock. All programs at that level and higher are blocked and
require the PIN to watch. To unblock a category, select the lock icon. To unblock all the categories in a
row, select the lock under ALL.
Categories on the left:
o TWY: Young children
TWY7: Children 7 and over
TWG: General audience
TWPG: Parental guidance
TW14: Viewers 14 and over
TWMA: Mature audience
Categories on the top:
ALL: Lock all TV ratings.
FV: Fantasy violence
V: Violence
S: Sexual situations
L: Adult Language
D: Sexually Suggestive Dialog
Blocking based on Movie Bating (MPAA)
Block movies based on their MPAA rating. This applies to all material with supplied ratings in the USA.
From the MPAA:
"The Motion Picture Association of America (MPAA) has implemented a rating system that provides
parents or guardians with advanced information on which films are appropriate for children."
Select a lock beside one of the rating categories to block that category and all higher categories. To
unblock a category, select the lock icon.
o G: General audience (no restrictions).
PG: Parental guidance suggested.
PGm13: Parents strongly cautioned.
R: Restricted. Children under 17 should be accompanied by an adult.
NC-17: No children under age 17.
X: Adults only.
NR: Not rated.
Blocking Based on Canadian English Bating
Block material based on its English Canadian rating. This applies to all rated material viewed on
English-Canadian TV channels.
Select a lock beside one of the rating categories to block that category and all higher categories. To
unblock a category, select the lock icon.
6: Programming intended for children under age 8
68+: Programming generally considered acceptable for children 8 years and over to watch on
their own
G: General programming, suitable for all audiences.
PG: Parental Guidance
14+: Programming containing themes or content which may not be suitable for viewers under the
age of 14
18+: Adult programming
Blocking Based on Canadian French Ratin9
Block material based on its French Canadian rating. This applies to all rated material viewed on
French-Canadian TV channels.
Select a lock beside one of the rating categories to block that category and all higher categories. To
unblock a category, select the lock icon.
G: General
8 ans+: Programming acceptable for children 8 years and over to watch on their own
13 ans+: Programming that may not be suitable for children under the age of 13
16 ans+: Programming not suitable for children under the age of 16
18 ans+: Programming restricted to adults
Blocking Based on Downloadablle US Rating
Block material based on its Downloadable U,S, Rating. This rating system only applies to material
originating from US DTV channels.
Parental restriction information is automatically downloaded while watching DTV channels. This
download may take several seconds. If the information is unavailable from the broadcasting station,
the Downloadable U°S° Rating menu is deactivated.
Parental restriction levels differ depending on the broadcasting station, and the default menu name
and the Downloadable U.S. Rating name changes depending on the downloaded information.
Even when the on-screen display is set to another language, the Downloadable U.S. Rating menu
appears only in English.
Select a lock beside one of the rating categories to block that category and all higher categories. To
unblock a category, select the lock icon.
Watching Blocked / Restricted Programs
To watch a blocked program, enter the PIN when requested.
When initially showing a restricted program or movie, the screen is blank because the Program Rating
Lock blocks it. Enter the PIN to unblock the program when a message appears requesting the code.
Rename Analog Channels
Select a channel you wish to rename from the Edit Channe_ screen, press TOOLS button, and then
select Rename Channel from the list.
You can now rename the selected channel. The new name can be up to 5 characters long.
Favorite Channels
Screen Menu > Broadcasting > Edit Favorites
The displayed image may differ depending on the model,
You can designate frequently watched channels as favorites. The channels assigned as a favorite are
displayed with the 4@symbol on the Edit Channel and channel list screens. You can create up to 5
favorite channel lists. You can also rename and edit favorite channel lists.
From the Edit Channel screen, select the virtual remote panel's or the regular remote's TOOLS button
to access the following options:
o Antenna: Choose between Cable and Air.
o Edit Channel" You can manage the channels saved on the TV. For details, see "Channel
Management".
o information: View detailed information about the current program.
Add Favorite Channels
Add
a channel to a favorite channels list.
PDP
5500, LED 6400 series and above
Select the [] button on the virtual remote panel to bring up the channel list containing the
channels you wish to add and then select the channels. However, the [] button is available only
when the Recently Viewed or MostNy Viewed channel list has one or more channel entries.
2_
Select the _ button to bring up a favorite channels list and then select the #3 button to add the
selected channels.
LED2_4300 - 6300 series
Press the [] button to bring up the channel list containing the channels you wish to add and then
select the channels. However, the [] button is available only when the RecentNy Viewed or MostNy
Viewed channel list has one or more channel entries.
Press the [_ button to bring up a favorite channels list and then press the #3 button to add the
selected channels.
Remove Favorite Channels
Remove channels from a favorite channels list.
PDP 5500, LED 6400 series and above
Select the _i_button on the virtual remote panel to bring up a favorite channels list and then
select the channels you wish to remove.
2, Select the #3 button on the virtual remote panel to remove the channels from the list.
LED 4300 - 6300 series
Press the [_ button to bring up a favorite channels list and then select the channels you wish to
remove.
2, Press the #3 button to remove the channels from the list.
Rearrange the Favorite Channels List
Rearrange the order of the channels in a Favorite Channels List.
PDP 5500, LED 6400 series and above
Select the [_ button on the virtual remote panel to bring up the favorite channels list and select
the channel you wish to move.
Z Select the [] button on the virtual remote panel to rearrange the order of the selected channel.
Press the touch pad to finish.
LED2_4300 - 6300 series
Press the [_ button to bring up the favorite channels list and select the channel you wish to move.
Press the [] button to rearrange the order of the selected channel. Press {ii_ button to finish.
Rename a Favorite Channel List
Rename an existing favorite channels list.
Select the virtual remote panel's or the regular remote's TOOLS button to display the list. Select
Rename Favorites from the list.
2_ Rename the list in the popup window. The new name can be up to 20 characters long.
Copy a Favorite Channels List
Copy channels from one favorite channels list to another.
Select the _} button on the virtual remote panel or press _} button on regular remote control to
bring up a Favorite Channels List and select the channels you wish to copy.
2_ Select the virtual remote panel's or the regular remote's TOOLS button to display the list. Select
Copy to Favorites from the list, and then select the Favorite Channels List(s) you wish to copy to.
This copies over the channels to the selected Favorite Channels List(s).
Network Configuration
Connecting the TV to a network gives you access to online services such as the Smart Hub as well as
software updates.
Wired Network
There are three ways to connect the TV to a Local Area Network (LAN).
o External Modem
o @ IP Router + @ External Modem
o Wall-mounted LAN Outlet
Loading...