Samsung 6300, 6050, 6000, UN32D6300, UN40D6300 User Manual

...
LED TV
user manual
E-MANUAL
© 2011 Samsung Electronics Co., Ltd. All rights reserved.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Country
Web Site Address
CANADA 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2 Canada
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, Inc. 85 Challenger
Road Ridgefi eld Park, NJ 07660
BN68-03534A-03
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model _____________ Serial No. _____________
If you have any questio ns, please call us at 1-800-SAMSU NG (1-800-726-7864) for assista nce.
[UD6300-ZA]BN68-03534A-03Eng.indb 1 2011-06-29 오전 10:38:12
English - 2
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms.
Wide screen format LED Displays (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature with the images constantly in motion. Displaying stationary graphics and images on the screen, such as the dark side bars on non-expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market crawls, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images for more than 5% of total viewing time can cause uneven aging of your LED display and leave subtle, but permanent burned­in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful about the television formats you select and the length of time you view them. Uneven LED aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited warranty.
y SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free: – In the United States : 1-800-SAMSUNG (1-800-726-7864) – In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock or news bars at the screen bottom etc.), or programs in panorama or 4:3 image format on the screen. Constantly displaying still pictures can cause image burn-in on the LED screen, which will affect image quality. To reduce risk of this effect, please follow the recommendations below:
y Avoid displaying the same TV channel for long periods. y Always try to display any image in full screen. Use the TV set’s picture format menu for the best possible match. y Reduce brightness and contrast to avoid the appearance of after-images. y Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.
[UD6300-ZA]BN68-03534A-03Eng.indb 2 2011-06-29 오전 10:38:12
English - 3
Accessories
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
The items’ colors and shapes may vary depending on the model.
Check that there are no accessories hidden behind or under packing materials when you open the box.
y Remote Control (AA59-00443A) & Batteries (AAA x 2) y Owner’s Instructions
y Power Cord y Cleaning Cloth y Warranty Card / Safety Guide
AV/Component Adapter AV Adapter Holder-Ring (4EA) Holder-Wire stand
(BN39-01154W) (BN39-01154H) (BN61-07295A) (BN61-05491A)
Input Cables (Sold Separately)
To purchase the RS232 cable, contact www.SamsungParts.com.
RS232 (AA39-00311A) Audio
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
QWERTY Remote (Sold Separately)
QWERTY Remote
Check the cable before plug-in
Cable Ports
HDMI
USB
Optical
Warning
Do not plug cable upside down. Be sure to check before plug-in.
[UD6300-ZA]BN68-03534A-03Eng.indb 3 2011-06-29 오전 10:38:15
English - 4
Viewing the Control Panel
The product color and shape may vary depending on the model.
Remote control sensor Aim the remote control towards this spot on the TV.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
SOURCE
E
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.
MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
y
Adjusts the volume. In the OSD, use the
y
buttons as you would use the
and buttons on the remote control.
z
Changes the channels. In the OSD, use the
z
buttons as you would use the
and buttons on the remote control.
P
(Power)
Turns the TV on or off.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord.
Install the Stand
See the separate stand installation guide for more detailed instructions.
Stand (depending on the model) Guide Stand Screws
A
1 EA
B
1 EA
C
D
x4 (M4 X L12)
x4 (M4 X L10)
Control Panel
[UD6300-ZA]BN68-03534A-03Eng.indb 4 2011-06-29 오전 10:38:16
English - 5
NOTE
x
Make sure to distinguish between the front and back of each component when assembling them.
x
Make sure that at least two people lift and move the TV.
Assembling the Holder-Wire stand
Side View
D
(M4 X L10)
x4
(Correct assembly) (Incorrect assembly)
Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen side down.
Insert the Stand Guide into the slot of TV bottom side.
1
4
5
3
2
B
A
Front
C
(M4 X L12)
x4
Top View
DO NOT USE
CHEMICALS
DO NOT USE
GREASE
DO NOT USE
OIL
ATTENTION
Rear
[UD6300-ZA]BN68-03534A-03Eng.indb 5 2011-06-29 오전 10:38:20
English - 6
Installing the Wall Mount
Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you
assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.
NOTE
x
Standard dimensions for wall mount kits are shown in the table below.
x
Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
x
Do not use screws that do not comply with the VESA standard screw specifications.
x
Do not use screws that are longer than the standard length or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.
x
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.
x
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
x
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
x
Do not mount the TV at more than a 15 degree tilt.
x
Always have two people mount the TV on a wall.
Product Family
TV size in
inches
VESA screw hole
specs (A * B) in
millimeters
Standard Screw Quantity
LED-TV
19~22 75 X 75
M4
4
23~29 200 X 100
32~40 200 X 200
M846~60 400 X 400
65~75 600 X 400
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
[UD6300-ZA]BN68-03534A-03Eng.indb 6 2011-06-29 오전 10:38:21
English - 7
Viewing the Remote Control
This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and Volume buttons.
Installing batteries (Battery size: AAA)
NOTE
x
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs.
x
The color and shape may vary depending on the model.
PRE-CH
CH LIST
POWER
1
4
2 3
5 6
7 8 9
0
<
<
MUTE
M
MENU
m
B C D
l
VOL CH
SMART
l
l
l
l
l
l
l
l
l
l
l
l
ON/OFF
SOURCE
HUB
SEARCH
SOCIAL MTS
TV
E-MANUAL
SRS
Turns the TV on and off.
Displays and selects the available video
sources.
Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to On will reduce the battery usage time.)
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays channel lists on the screen.
Support to recommendation search word and search function.
Displays information on the TV screen.
Exits the menu.
Have direct access to channels.
Adjusts the volume.
Opens the OSD.
Quickly select frequently used functions.
Link to various application services.
Returns to the previous menu.
Selects the on-screen menu items and changes the values seen on the menu.
These buttons are for the Channel List
and SMART HUB menu, etc.
Use these buttons in a specific feature.
For details, refer to e-Manual.
SOCIAL TV: Displays the Social TV
screen.
MTS: Press to choose stereo, mono,
Separate Audio Program (SAP broadcast).
SRS: Turns the SRS TruSurround HD
on or off.
E-MANUAL: Displays the e-Manual. P.SIZE: Selects the Picture Size. CC: Displays digital subtitles.
[UD6300-ZA]BN68-03534A-03Eng.indb 7 2011-06-29 오전 10:38:21
English - 8
How to Navigate Menus
Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
1 MENU button: Displays the main on-screen menu. 2 ENTER
E
/ Direction button: Move the cursor and
select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access steps may differ depending on the selected menu.
1
MENU The main menu options appear on
the screen:
Picture, Sound, Channel, Network, System, Support.
2
/ Select an icon or option with the
or button.
3
ENTER
E
Press ENTERE to access the sub-menus.
4
/
Select the desired submenu with the or button.
5
/
Adjust the value of an item with the or button. The adjustment in the OSD may differ depending on the selected menu.
6
ENTER
E
Press ENTERE to confirm the selection.
7
EXIT
e
Press EXIT.
Connecting the power cord and an antenna or cable connection
Connecting the power cord and an antenna or cable connection
When you move or swivel the TV with Antenna cable tightly connected, there is high risk antenna jack on TV will be broken off.
For the best cable connections to this product, be sure to use cables no thicker than 0.55 inches (14mm).
x
Maximum thickness - 0.55 inches (14mm)
PRE-CH
CH LIST
POWE
R
4
<
M
UTE
C
VOL
CH
SMART
ON/OFF
SOURCE
HUB
SEARCH
MENU
m
l
l
l
l
1
2
3
4
VHF/UHF Antenna
ANT OUT
Power Input
or
Cable
Antenna Cable (Not Supplied)
[UD6300-ZA]BN68-03534A-03Eng.indb 8 2011-06-29 오전 10:38:23
Loading...
+ 18 hidden pages