SAMSUNG UE40C7700, UE46C7700, UE55C7700 User Manual [en, fr, de, nl]

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at BELGIUM 02-201-24-18 www.samsung.com/be (Dutch)
DENMARK 70 70 19 70 www.samsung.com/dk FINLAND 030 - 6227 515 www.samsung.com/ FRANCE 01 48 63 00 00 www.samsung.com/fr GERMANY 01805 - SAMSUNG (726-7864 € 0,14/Min) www.samsung.de HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com/hu ITALIA 800-SAMSUNG (726-7864) www.samsung.com/it LUXEMBURG 261 03 710 www.samsung.com/lu NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl NORWAY 815-56 480 www.samsung.com/no POLAND 0 801 1SAMSUNG (172678)
PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se Turkey 444 77 11 www.samsung.com/tr U.K 0845 SAMSUNG (7267864) www.samsung.com/uk EIRE 0818 717100 www.samsung.com/ie Switzerland 0848 - SAMSUNG (7267864, CHF 0.08/min) www.samsung.com/ch
LITHUANIA 8-800-77777 www.samsung.com/lt LATVIA 8000-7267 www.samsung.com/lv ESTONIA 800-7267 www.samsung.com/ee
Customer Care Centre
Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
022-607-93-33
Web Site
www.samsung.com/be_fr (French)
www.samsung.com/pl
www.samsung.com/ch_fr/(French)
LED TV user manual
LED TV
user manual
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model _____________ Serial No. _____________
BN68-02590G-03
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Digital TV notice
1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are
broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.
2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast
transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this specification. So, they cannot be workable at this moment.
3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and
DVB-C digital cable broadcasts cannot be guaranteed.
4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may
be required to agree to terms and conditions of their business.
5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.
6. For more information, please contact your local Samsung customer care centre.
The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV
performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image on full screen, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
Installation with a stand. Installation with a wall-mount.
2
10 cm
English
10 cm
10 cm
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
10 cm
10 cm
10 cm
10 cm
Contents
Getting Started
4
Connections
8
Basic Features
12
Advanced Features
29
4 Accessories 5 Viewing the Control Panel 6 Viewing the Remote Control 7 Connecting to an Antenna 7 Plug & Play (Initial Setup)
8 Connecting to an AV Device 10 Connecting to an Audio Device 11 Changing the Input Source
12 How to Navigate Menus 12 Using the INFO button (Now & Next guide) 12 Planning Your Viewing 14 Channel Menu 17 Picture Menu 23 Sound Menu 25 Setup Menu 28 Support Menu
29 Connecting to a PC 30 Network Connection 37 Media Play 46 Anynet+ 50 Internet@TV 53 AllShare
ENGLISH
Other Information
TOOLS
This function can be used by
pressing the TOOLS button on the
remote control.
55
55 Analogue Channel Teletext Feature 56 Assembling the Cables 57 Installing the Wall Mount 59 Anti-theft Kensington Lock 59 Securing the TV to the wall 60 Troubleshooting 65 Specifications 66 Index
Check the Symbol!
Note One-Touch Button
English
3
Getting Started
Accessories
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
The items’ colours and shapes may vary depending on the models.
Cables not included in the package contents can be purchased separately.
CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET
y Remote Control & Batteries (AAA x 2) y Warranty Card / Safety Guide (Not available in some locations)
(M4 X L8)
y Blanking Bracket & Screw (X1) y Holder-Ring (4ea) y Holder-Wire stand
y Cable Tie y Holder-Wire (3ea) y LAN Adapter
y Cleaning Cloth y Owner’s Instructions
y Antenna Adapter
(Air / Cable)
y Component Adapter y AV Adapter y SCART Adapter (2EA)
See separate guide for installing the stand.
y Stand (1EA) y Guide Stand (1EA) y Screws (9EA)
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
y Antenna Adapter
(Satellite)
y Maximum thickness - 0.55 inches (14mm)
y Optical Adapter y PC Adapter
s
s
s
s
s
M4 X L8
4
English
Viewing the Control Panel
The product colour and shape may vary depending on the model.
Power Indicator Remote control sensor
Speakers
Power Indicator Blinks and turns off when the power is on and lights up in standby mode. Remote control sensor Aim the remote control towards this spot on the TV.
SOURCE
MENU
(Power)
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER button on the remote control.
Displays an on-screen menu, the OSD (on screen display), of your TV’s features. Adjusts the volume. In the OSD, use the
and buttons on the remote control. Changes the channels. In the OSD, use the
and buttons on the remote control. Turns the TV on or off.
buttons as you would use the
buttons as you would use the
01 Getting Started
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English
5
Getting Started
Viewing the Remote Control
Displays✎and✎selects✎the✎available✎video✎
sources✎(p.✎11).
Turns✎the✎TV✎on✎and✎off.
Have✎direct✎access✎to✎channels.
Alternately✎select✎Teletext✎ON,✎Double,✎
Mix✎or✎OFF.
Adjusts✎the✎volume.
✎Opens✎the✎OSD.
Displays✎the✎Content View,✎which✎ includes✎Guide, 3D, Internet@TV,
Media Play,✎and✎AllShare.
✎Quickly✎select✎frequently✎used✎functions.
Selects✎the✎on-screen✎menu✎items✎and✎ changes✎the✎values✎seen✎on✎the✎menu.
Returns✎to✎the✎previous✎menu.
POWER
TTX/MIX
CONTENT
TOOLS
RETURN
SOURCE
MUTE
CH LIST
MENU
ON/OFF
PRE-CH
GUIDE
INFO
EXIT
Turns✎the✎remote✎control✎light✎on✎or✎ off.✎When✎on,✎the✎buttons✎become✎ illuminated✎for✎a✎moment✎when✎pressed.✎ (Using✎the✎remote✎control✎with✎this✎button✎ set✎to✎On✎will✎reduce✎the✎battery✎usage✎ time.)
Returns✎to✎the✎previous✎channel.
Cuts✎off✎the✎sound✎temporarily.
Changes✎channels.
Displays✎channel✎lists✎on✎the✎screen✎ (p.✎14).
Displays✎the✎EPG✎(Electronic✎Programme✎ Guide)✎(p.12).
Displays✎information✎on✎the✎TV✎screen.
Exits✎the✎menu.
These✎buttons✎are✎for✎the✎✎
Channel Manager, Internet@TV,
Media Play✎menu,✎etc.
Use✎these✎buttons✎in✎Media Play✎and✎
Anynet+ (HDMI-CEC)✎modes.✎(p.✎37,✎46)✎
(The✎�✎button✎also✎controls✎recording✎ for✎Samsung✎recorders✎that✎support✎the✎
Anynet+(HDMI-CEC),TimeShift✎and✎PVR✎
features.)
Installing batteries (Battery size: AAA)
English
6
A B C D
MEDIA.P
INTERNET
@TV
P.SIZEAD
NOTE
Use✎the✎remote✎control✎within✎23✎feet✎from✎the✎TV.
x
Bright✎l ight✎may✎affect✎the✎performance✎of✎the✎remote✎control.✎
x
Avoid✎using✎nearby✎special✎fluorescent✎light✎or✎neon✎signs. The✎colour✎and✎shape✎may✎vary✎depending✎on✎the✎model.
x
SUBT.
MEDIA.P:✎Displays✎Media Play (p.✎37). INTERNET@TV:✎Link✎to✎various✎internet✎
services✎(p.✎50).
3D:✎Sets✎the✎video,✎which✎provided✎with✎
3D✎signal✎(p.✎21).
AD:✎Turns✎the✎audio✎description✎on✎and✎
off✎(p.✎24).✎This✎is✎not✎available✎in✎some locations.
P.SIZE:✎Selects✎the✎picture✎size✎(p.✎19). SUBT.:✎Displays✎digital✎subtitles✎(p.✎26).
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Preset: Connecting the mains and antenna.
01 Getting Started
Satellite Antenna
ANT 2 IN
(
SATELLITE
)
ANT 1 IN
VHF/UHF Antenna
or
Cable
ANT OUT
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
Selecting a language
1
Selecting Store Demo or Home Use
2
Selecting a country
3
Selecting an antenna
4
Selecting a channel
5
Setting the Clock Mode Set the Clock Mode automatically or manually.
6
Time Zone
7
Viewing the
HD Connection Guide.
8
Enjoy your TV.
Press the or ▼ button, then press the ENTER Select the desired OSD (On Screen Display) language.
Press the or ► button, then press the ENTER
• Select the Home Use mode. Store Demo mode is for retail environments.
• To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When the OSD volume is displayed, press and hold MENU for 5 sec.
Press the or ▼ button, then press the ENTER Select the appropriate country.
After selecting the country in the Country menu, some models may proceed with an additional option to setup
the pin number. When you input the PIN number, 0-0-0-0 is not available.
Press the or ▼ button, then press the ENTER button. Select Air, Cable or Satellite.
Press the or ▼ button, then press the ENTER Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel Auto Store (p. 14).
When Air or Cable is selected first: After all Air or Cable channels are stored, the step for storing Satellite
channels is displayed. When Satellite is selected first: After all Satellite channels are stored, the step for storing Air or Cable
channels is displayed. Press the ENTER button at any time to interrupt the memorisation process.
Press the or ▼ button to select Auto, then press the ENTER button. Press the or ▼ button to select the your time zone, then press the ENTER button. (depending on the
country)
The connection method for the best HD screen quality is displayed.
Press the ENTER button.
button.
button.
button.
button.
POWER
P
9
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.
English
7
Connections
R-AUDIO-L
Connecting to an AV Device
Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB)
DVD /
Blu-ray player
HDMI OUT
DVD /
v
Blu-ray player
W
R
Red White
HDMI IN 1(DVI), 2(ARC), 3, 4, PC/DVI AUDIO IN
For better picture and audio quality, connect to a digital device using an HDMI cable.
x
An HDMI cable supports digital video and audio signals, and does not require an audio cable.
x
– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
x
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
Be sure to use an HDMI cable with a thickness of 14 mm or less.
x
Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
x
occur. A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the
x
ethernet function via HDMI. This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the
x
ARC function is supported by the HDMI IN 2(ARC) port only.
– If 3D Auto View is set to On, some functions such as Internet@TV may be disabled. In this case,
set 3D Auto View or 3D Mode to Off.
The ARC function allows digital audio to output via the HDMI IN 2(ARC) port. It can be enabled only when the
x
TV is connected with an audio receiver that supports the ARC function.
DVI OUT
AUDIO OUT
8
English
Using a Component (up to 1080p) or Audio/Video (480i only) and Scart Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
02 Connections
DVD /
Blu-ray player
COMPONENT OUT
R
B
G
W R
W R
Y
PR PB Y
R
VCR / DVD
AV
EXT
W
W
R
In Ext.1, Ext.2 mode, DTV Out supports MPEG SD Video and Audio only.
To obtain the best picture quality, the Component connection is recommended over the A/V connection.
RGB
R
Y
RedRed WhiteWhite YellowRed Blue Green
AUDIO OUT
R-AUDIO-L
B
G
R-AUDIO-L
VCR
WRWR
VIDEO OUTAUDIO OUT
Y
English
9
Connections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analogue) Cable or Headphone Connection
Available devices: digital audio system, amplifier, DVD home theatre
AUDIO IN
W R
W
R
Red White
DIGITAL AUDIO OUT (OPTICAL)
When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
x
of both the TV and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the
x
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
Headphones : You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.
Sound function may be restricted when connecting headphones to the TV.
x
Headphone volume and TV volume are adjusted separately.
x
AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theatre.
When connecting, use the appropriate connector.
x
When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust
x
the volume level with the amplifier’s volume control.
R-AUDIO-L
OPTICAL
amplifier,
DVD home theatre
digital audio system
10
English
CONNECTIONS COMMON INTERFACE Slot
To watch paid channels, the “CI or CI+ CARD” must be inserted.
y If you don’t insert the “CI or CI+ CARD,” some channels will
display the message “Scrambled Signal”.
y The pairing information containing a telephone number, the “CI or
CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
y When the configuration of channel information has finished, the
message “Updating Completed” is displayed, indicating the channel list is updated.
NOTE
You must obtain a “CI or CI+ CARD” from a local cable service provider.
x
When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may
x
cause damage to it. Insert the “CI or CI+ CARD” in the direction marked on the card.
x
The location of the COMMON INTERFACE slot may be different depending on the model.
x
“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
x
If you have any problems, please contact a service provider.
x
Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be
x
seen. When you are watching the satellite TV, remove the “CI or CI+ CARD” of terrestrial and cable. The screen will be
x
distorted or will not be seen.
02 Connections
Changing the Input Source
Source List
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.
TV / Ext.1 / Ext.2 / PC / AV /
Component / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB
In the Source List, connected inputs will be highlighted.
Ext.1, Ext.2 and PC always stay activated.
SOURCE
Edit Name
■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the
HDMI IN 1(DVI) port, you should set to DVI PC or
DVI Devices mode under Edit Name.
If an HDMI cable is connected to the
HDMI IN 1(DVI) port, the audio may not work. In
this case, connect to the PC/DVI AUDIO IN port.
English
11
Basic Features
P
OWER
SOURCE
O
N/OFF
CO
T
TTX/MIX
PRE-CH
GUIDE
CH LIS
T
MUTE
TOOLS
INFO
How to Navigate Menus
Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
MENU
NTEN
3
1
2
RETURN
EXIT
4
1 ENTER / Direction button: Move the cursor and
select an item. Confirm the setting.
2 RETURN button: Returns to the previous menu. 3 MENU button: Displays the main on-screen menu. 4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1
MENU
The main menu options appear on the screen:
Picture, Sound, Channel, Setup, Input, Application, Support.
/ Select an icon with the or
2 3 4 5
ENTER
/
/
button.
Press ENTER to access the sub-menu.
Select the desired submenu with the orbutton.
Adjust the value of an item with the or button. The adjustment in the OSD may differ depending on the selected menu.
ENTER
6
EXIT
Press ENTER to complete the configuration.
Press EXIT.
7
Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video settings.
The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time.
y Scroll , to view information for a
desired programme while watching the current channel.
y Scroll , to view information for other channels. If you
want to move to the currently selected channel, press the ENTER
DEF
DTV Air
15
button.
Unclass ified
No Det aild Inform ation
Life On Venus Avenu e
18:00 ~ 6:00
INFO
18:11 Thu 6 Jan
Watch
E
Information
Planning Your Viewing
Guide
The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status.
Using Channel View
Guide
DTV Air 800 five
Home and Away 18:00 - 18:30
Drama
800 five
Channel View - TV
Today
27 28 800 24 16 6
Dani is devastated when scott makes clear his views on marriage...
Discovery DiscoveryH&L five price-drop.tv QVC R4DTT
View Mode +24 Hours Ch. Mode Information  Page
18:00 - 19:00 19:00 - 20:00
American Chopper
Programmes resume at 06:00 Home and... No Information QVC Selection No Information
)
Family Affairs
Tine Team
Fiv...
)
GUIDE
2:10 Tue 1 Jun
Dark Angel

Watch
1 2 3 4 5 6
English
12
Using Scheduled View
Guide
Family Affairs
) )
Dark Angel
View Mode Information
1 4 6
800 800
button again and
DTV Air 800 five
Family Affairs 18:00 - 18:30
Drama
800 five
Scheduled View
18:30
Today
19:15
Today
1
Red (View Mode): View the list of programmes that
Tanya confesses all to a stunned Babs. Conrad is anxious to hear...
are playing now or coming up.
2
Yellow (+24 Hours): Viewing the list of programmes to
be broadcasted after 24 hours.
3
Blue (Ch. Mode): Select the type of channels you
want to display on the Channel View window.
– The Ch. Mode differs according to the antenna
source.
4 Information: Displays details of the selected
programme.
5
(Page): Move to next or previous page.
6 ENTER
button
– When selecting the current programme, you can
watch the selected programme.
– When selecting the future programme, you can
reserve to watch the selected programme. To cancel the schedule, press the ENTER select Cancel Schedules.
2:10 Tue 1 Jun
five five

Cancel
Channels: Shows the channel list according to channel type.
My Channels: Shows the group of the channel.
Satellite: Shows the channel list according to
satellite signal.
Scheduled: Shows all the currently reserved
programmes.
Using the colour buttons with the Channel Manager
Red (Antenna): Toggle among Air, Cable or
x
Satellite.
Green (Zoom): Enlarges or shrinks a channel
x
number.
Yellow (Select): Select desired channels and press
x
the Yellow button to set all the selected channels at the same time. The  mark appears to the left of the selected channels.
Blue (Sort): Change the list ordered by channel
x
name or channel number.
(Page): Move to next or previous page.
x
(Tools): Displays the Channel Manager option
x
menu. (The options menus may differ depending on the situation.)
Channel Status Display Icons
Icons Operations
An analogue channel.
A channel selected. A channel set as a Favourite.
A programme currently being broadcast.

A locked channel.
A reserved programme.
03 Basic Features
Channel Manager
Delete or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the Channels, My Channels, Satellite or Scheduled screen.
Channels
All
TV Radio Data/Other Free Scrambled Searched
Satellite Antenna Zoom Select Sort  Page
c 1 1futech 2 * 24ore.tv
15 abc1
3 BBC World 23 bid-up.tv 33 Boonerang 32 Cartoon Nwk
5 Class News 4 Coming Soon 27 Discovery

Tools
Guide Type (Samsung / Guide Plus+)
(depending on the country) You can select a different type of Guide.
Samsung: Uses the guide programme by provided samsung.
Guide Plus+: Uses the guide programme provided by Rovi International Solutions. For more information, refer to “www.europe.guideplus.com.”
English
13
Basic Features
Using Favourite Channels
My Channels
(in Channel Manager) Shows all favourite channels.
Edit My Channels
channels to desired my channels group.
The “” symbol will be displayed and the channel will be set as a my channel.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel in the my channel groups
you want among 1, 2, 3 and 4.
One or more groups can be selected.
x
3. After you have changed the settings, the channel list
for each group can be viewed in my channels.
Channels
Satellite Antenna Zoom Select Sort  Page
All
TV Radio Data/Other Free Scrambled Searched
: You can set the selected
c 1 1futech 2 * 24ore.tv
15 abc1
Edit My Channels
Lock
3 BBC World
Timer Recording
23 bid-up.tv
Timer Viewing
33 Boonerang
Edit Channel Number
32 Cartoon Nwk
Delete
5 Class News 4 Coming Soon 27 Discovery

Tools
Channel List
You can see all the channels searched.
CH LIST
Channel Menu
 Returning Channels
Antenna (Air / Cable / Satellite)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air, Cable or Satellite system).
Country
The PIN input screen appears. Enter your 4 digit PIN number.
Digital Channel: Change the country for digital channels.
Analogue Channel: Change the country for analogue channels.
Auto Store
Scans for a channel automatically and stores in the TV.
Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears.
Antenna Source (Air / Cable / Satellite): Select the antenna source to memorise.
When Antenna Source is set to Air or Cable:
■ Channel Source (Digital & Analogue / Digital / Analogue): Select the channel source to memorise.
When selecting Cable Digital & Analogue or Digital: Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV.
If you select Quick, you can set up the Network,
Network ID, Frequency, Modulation, and Symbol Rate manually by press the button on the
remote control.
Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual.
Network ID: When Network is Manual, you can set up Network ID using the numeric buttons.
Frequency: Displays the frequency for the channel.
(differs in each country)
Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates.
14
English
When Antenna Source is set to Satellite:
Channel Type (All / TV / Radio): Select the Channel
type to memorise.
Satellite: Selects the satellite to scan.
Scan Mode (All Channels / Free Channels Only):
Selects the scanning mode of the selected satellite.
Manual Store
Scans for a channel manually and stores in the TV.
If a channel is locked using the Child Lock function, the PIN input window appears.
When Antenna Source is set to Air or Cable:
Digital Channel: When scanning has finished, channels
are updated in the channel list.
When selecting Antenna Air: Channel,
Frequency, Bandwidth
When selecting Antenna Cable: Frequency,
Modulation, Symbol Rate
■ Analogue Channel (Programme, Colour System, Sound System, Channel, Search): If there is abnormal
sound or no sound, reselect the sound standard required.
Channel mode
P (programme mode): When tuning is complete,
x
the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.
C (aerial channel mode) / S (cable channel mode):
x
These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
When Antenna Source is set to Satellite:
Satellite: Selects the satellite using the up/down buttons.
Transponder: Selects the transponder using the up/ down buttons.
Scan Mode (All Channels / Free Channels Only): Selects either free or all channels to store.
Network Search (Disable / Enable): Enable / Disable network search using the up/down buttons.
Signal Quality: Display the current status of broadcasting signal.
Information on a satellite and its transponder is subject to change depending on the broadcasting conditions.
When setting is completed, move to Search and press the ENTER button. Channel scan is started.
Satellite System Setup
The PIN input screen appears. Enter your 4 digit PIN number.
Satellite System Setup is available when Antenna is set to Satellite. Before runZning Auto Store, set Satellite System Setup. Then channel scan is run normally.
Satellite Selection: You can choose the satellites for
this TV.
LNB Power (Off / On): Enables or disables the power
supply for the LNB.
LNB Settings: Configures the outdoor equipment.Satellite: Selects the satellite for receiving digital
broadcasts.
Transponder: Selects a transponder from the list or
adds a new transponder.
DiSEqC Mode: Selects DiSEqC mode for the
selected LNB.
Lower LNB Oscillators: Sets the LNB oscillators to a
lower frequency.
Upper LNB Oscillators: Sets the LNB oscillators to a
higher frequency.
Tone 22 kHz (Off / On / Auto): Selects the Tone 22
kHz depending on the LNB type. For a universal LNB it should be Auto.
Signal Quality: Display the current status of
broadcasting signal.
Positioner Settings: Configures the antenna positioner.
Positioner (On / Off): Enables or disables the positioned control.
Positioner Type (USALS / DiSEqC 1.2): Sets the positioned type between DiSEqC 1.2 and USALS(Universal Satellite Automatic Location System).
My Longitude: Sets the longitude for my location. – My Latitude: Sets the latitude for my location. – Satellite Longitude Settings: Sets the longitude of
user defined satellites.
User Mode: Sets the position of satellite antenna according to each satellite. If you store the current position of satellite antenna according to a certain satellite, when the signal of that satellite is needed, the satellite antenna can be moved to pre-populated position.
Satellite: Selects the satellite to set the position for. – Transponder: Selects a transponder from the list for
signal reception.
Moving Mode: Selects the movement mode between
discrete and continuous movement.
Step Size: Adjusts the step size degrees for the
antenna rotation. Step Size is available when Moving Mode is set to Step.
03 Basic Features
English
15
Basic Features
Go to Stored Position: Rotates the antenna to the
stored satellite position.
Antenna Position: Adjusts and stores the antenna
position for the selected satellite.
Store Current Position: Stores current position as
the selected positioner limit.
Signal Quality: Display the current status of
broadcasting signal.
Installer Mode: Sets limits to the scope of movement of satellite antenna or reset the position. Generally, installation guide uses this function.
Limit Position (East / West): Selects the direction of
the positioner Limit.
Antenna Position: Adjusts and stores the antenna
position for the selected satellite.
Store Current Position: Stores the current position
as the selected positioner Limit.
Go to Zero: Moves the antenna to the reference
position.
Reset Positioner Limit: Allows the antenna to rotate
over the full arc.
Reset All Setting (OK / Cancel): All satellite settings will
be reset to the initial values.
¦ Editing Channels
Channel Manager Option Menu (in Channel Manager)
1. Select a channel and press the TOOLS button.
2. Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu.
Edit Channel Name (analogue channels only): Assign
your own channel name.
Edit Channel Number (digital channels only): Edit the
number by pressing the number buttons desired.
¦ Other Features
Cable Search Option
(depending on the country) Sets additional search options such as the frequency and
symbol rate for a cable network search.
Freq.Start / Freq.Stop: Set the start or stop frequency
(differs in each country)
Symbol Rate: Displays available symbol rates.
Modulation: Displays available modulation values.
Channel Manager
Channel Manager Option Menu
Set each channel using the Channel Manager menu options (Lock / Unlock, Timer Viewing, Timer Recording, Sort, Reorder, Delete, Select All / Deselect All). Option menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Lock / Unlock: Lock a channel so that the channel
cannot be selected and viewed.
NOTE
This function is available only when the
x
Child Lock is set to On. The PIN input screen appears. Enter your
x
4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the current time first to use this function.
When a digital channel is selected in Channel Manager, press the button to view the digital Programme.
Timer Recording (digital channels only): Allows you to
record a programme currently being broadcasted or make a reservation to record a programme scheduled for broadcast.
A USB device with 4GB of memory or greater must be connected to the TV.
A USB storage device cannot record until it completes the Device Performance Test.
In case of USB-HDD, over 5400rpm
In case of USB Stick, USB 2.0 and SLC Type. (Minimum size of USB Stick is 2GB.)
To record, press the (REC) button on the remote. Press (REC) twice to set the recording duration
Sort (analogue channels only): This operation allows
you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.
Reorder (when the Antenna was set to Satellite):
Rearrange the channel manager in numerical order.
Delete: You can delete a channel to display the channels
you want.
Select All / Deselect All: Select all the channels
or deselect all the selected channels in the channel manager.
16
English
Scheduled
(in Channel Manager) You can view, modify or delete a show you have reserved to
watch.
Change Info: Change a show you have reserved to
watch.
Cancel Schedules: Cancel a show you have reserved
to watch.
Information: Display a show you have reserved
to watch. (You can also change the reservation information.)
Select All / Deselect All: Select or deselect all reserved
programmes.
 Adjusting Picture Settings
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
NOTE
In analogue TV, Ext., AV modes of the PAL system,
x
the Tint (G/R) function is not available. In PC mode, you can only make changes to
x
Backlight, Contrast and Brightness. Settings can be adjusted and stored for each
x
external device connected to the TV.
03 Basic Features
Channel List Transfer
The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports the channel map. You should connect a USB storage to use this function.
Import from USB: Import channel list from USB.
Export to USB: Export channel list to USB. this function
is available when USB is connected.
Fine Tune
(analogue channels only) If the signal is weak or distorted, fine tune the channel
manually.
Fine tuned channels are marked with an asterisk “*”.
To reset the fine-tuning, select Reset.
Picture Menu
 Changing the Preset Picture Mode
Mode
Select your preferred picture type.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Natural: Suitable for reducing eye strain.
Natural is not available in PC mode.
Movie: Suitable for watching movies in a dark room.
 Economical Solutions
Eco Solution
■ Energy Saving (Off / Low / Medium / High / Picture Off / Auto)
of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.
Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room.
If you adjust the Backlight, the Eco Sensor will be set to Off.
Min Backlight: When Eco sensor is On, the minimum screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity.
No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it’s not receiving a signal.
Disabled when the PC is in power saving mode.
: Adjust the brightness
English
17
Basic Features
 Changing the Picture Options
Advanced Settings
(available in Standard / Movie mode) You can adjust the detailed setting for the screen including
colour and contrast.
In PC mode, you can only make changes to
Dynamic Contrast, Gamma, White Balance and LED Motion Plus.
Advanced Settings
Black Tone : Off ► Dynamic Contrast : Medium Shadow Detail : -2 Gamma : 0
Expert Pattern : Off
RGB Only Mode : Off Colour Space : Native ▼
Move

Enter

Return
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
Shadow Detail (-2~+2): Increase the brightness of dark
images.
Gamma: Adjust the primary colour intensity.
Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern function, the picture can be calibrated without a generator or filter. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.
While the Expert Pattern is running, sound is not outputted.
RGB Only Mode (Off / Red / Green / Blue): You can adjust Colour or Tint (G/R) of Red, Green or Blue for the picture from an external device (DVD player, home theatre, etc.).
Colour Space (Auto / Native / Custom): Adjust the
range of colours available to create the image. To adjust
Colour, Red, Green, Blue and Reset, set Colour Space to Custom.
White Balance: Adjust the colour temperature for a
more natural picture. R-Offset / G-Offset / B-Offset: Adjust each colour’s
(red, green, blue) darkness. R-Gain / G-Gain / B-Gain : Adjust each colour’s (red,
green, blue) brightness. Reset: Resets the White Balance to it’s default settings.
10p White Balance (Off / On): Controls the white
balance in 10 point interval by adjusting the red, green, and blue brightness.
Available when the picture mode is set to Movie and when the external input is set to all input.
Some external devices may not support this function.
Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default
settings.
Flesh Tone: Emphasize pink “Flesh Tone.”
Edge Enhancement (Off / On): Emphasize object
boundaries.
xvYCC (Off / On): Setting the xvYCC mode on
increases detail and colour space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks.
Available when the picture mode is set to Movie and when the external input is set to HDMI or Component.
Some external devices may not support this function.
LED Motion Plus (Off / Normal / Cinema / Ticker):
Removes drag from fast scenes with a lot of movement to provide a clear picture.
18
English
Picture Options
In PC mode, you can only make changes to the Colour Tone, Size and Auto Protection Time.
Picture Options
Colour Tone : Normal ► Size : Auto Wide Screen Mode : 16:9 Digital Noise Filter : Auto MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off ▼
Move

Enter

Colour Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.
Settings can be adjusted and stored for each external device connected to an input on the TV.
Size : Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9 : Adjusts the picture size to 16:9 for DVDs or wide broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.
Adjusts the Position by using , buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
Adjusts the Position or Size by using , button.
4:3 : The default setting for a movie or normal broadcasting.
Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty.
P.SIZE
Return
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
NOTE
When Double (, ) mode has been set in PIP,
x
the Picture Size cannot be set. Depending on the input source, the picture size
x
options may vary. The available items may differ depending on the
x
selected mode. In PC mode, only 16:9 and 4:3 modes can be
x
adjusted. Settings can be adjusted and stored for each
x
external device connected to an input of the TV. After selecting Screen Fit in HDMI (1080i / 1080p)
x
or Component (1080i / 1080p) mode: Adjusts the Position or Size by using , ▼, , button.
If you use the Screen Fit function with HDMI 720p
x
input, 1 line will be cut at the top, bottom, left and right as in the overscan function.
Screen Mode (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.
Not available in PC, Component or HDMI mode.
Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): When the broadcast signal is weak, some static and ghosting may appear. Select one of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels, displays the intensity of the current signal and defines the screen noise filter.
Only available for analogue channels.
MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.
HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
03 Basic Features
English
19
Basic Features
■ Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo): Removes drag from fast scenes with
a lot of movement to provide a clearer picture.
If noise occurs on the screen, please set up the Motion Plus to Off. If Motion Plus is Custom, you can set up the Blur Reduction, Judder Reduction or Reset manually.
If Motion Plus is Demo, you can compare the difference of on and off modes.
Blur Reduction: Adjusts the blur reduction level from video sources.
Judder Reduction: Adjusts the judder reduction level from video sources when playing films.
Reset: Reset the custom settings.
Auto Protection Time (2 hours / 4 hours / 8 hours / 10 hours / Off): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
 Viewing TV using the 3D function
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.
Read and understand the following safety information before using the TV’s 3D function.
WARNING
Some viewers may experience discomfort while
x
viewing 3D TV such as dizziness, nausea and headaches. If you experience any such symptom, stop viewing 3D TV, remove 3D Active Glasses and rest.
Watching 3D images for an extended period of time
x
may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses and rest.
A responsible adult should frequently check on
x
children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.
Do not use the 3D Active Glasses for other purposes
x
(such as general eyeglasses, sunglasses, protective goggles, etc.)
Do not use the 3D function or 3D Active Glasses while
x
walking or moving around. Using the 3D function or 3D Active Glasses while moving around may result in injuries due to running into objects, tripping, and/ or falling.
20
English
3D
This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses (SSG­2100AB, SSG-2200AR, SSG-2200KR) to view 3D video.
Samsung 3D Active Glasses are sold separately. For more detailed purchasing information, contact the retailer where you purchased this TV.
3D emitter
If there is any obstacle between the emitter and 3D Active Glasses, the proper 3D effect may not be obtained.
3D Mode: Select the 3D input format.
If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 3D Mode from the list below that provides the best 3D viewing experience.
When watching 3D images, turn on 3D Active Glasses.
3D Mode Operation Off Turns the 3D function off.
2D 3D
Side by Side
Top & Bottom
Line by Line
Vertical Stripe
Checker Board
Frequency
Changes a 2D image to 3D. Displays two images next to
each other. Displays one image above
another. Displays the images for the left
and right eye alternately in rows. Displays the images for the
left and right eye alternately in columns.
Displays the images for the left and right eye alternately in pixels.
Displays the images for the left and right eye alternately in frames.
Side by Side” and “Top & Bottom” are available when the resolution is 720p, 1080i and 1080p in DTV, HDMI and USB mode or set to PC connecting through HDMI/DVI cable.
“Vertical Strip”, “Line by Line” and “Checker Board” are available when the resolution is set to PC connecting through HDMI/DVI cable.
“Frequency” displays the frequency (60Hz only) when the resolution is set to PC.
3D 2D (Off / On): Displays the image for the left eye
only.
This function is deactivated when 3D Mode set to “2D 3D” or Off.
3D View point: The overall adjustment of 3D
perspective.
This function is deactivated when 3D Mode set to “2D 3D” or Off.
Depth: Adjusts focus / depth in “2D 3D” mode.
This function is only activated when the 3D Mode is “2D 3D”.
Picture Correction: Adjusts the images for the left and
right eye.
3D Auto View (Off / On): If 3D Auto View is set to On,
a “Side by Side” format HDMI signal with one of the resolutions below is automatically switched to 3D. Here, correct 3D information must be sent from the Standard HDMI 3D Format.
If a 3D failure occurs due to a 3D information error, set 3D Auto View to Off and manually select a 3D Mode using the 3D button or corresponding menu.
Support resolution (16:9 only)
Resolution Frequency (Hz)
1280 x 720p 50 / 60 Hz
1920 x 1080i 50 / 60 Hz
1920 x 1080p 24 / 30 / 50 / 60 Hz
3D Optimisation: The overall adjustment of 3D effect.
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x 1080 input.
An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode.
03 Basic Features
English
21
Basic Features
How to watch the 3D image
3D
To watch in 3D, wear 3D glasses and press the power button on the glasses. Viewing 3D TV motion pictures for long periods may cause eye fatigue and/or dizziness.
OK
Cancel
Move

Enter

Exit
3D3D
Using the LEFT / RIGHT keys on the remote control,
Using the LEFT / RIGHT keys on the remote control, select the icon suitable for the picture on screen.
select the icon suitable for the picture on screen.
Move

Enter

Move

1. Press the CONTENT button, then the Content View
menu will appear.
2. Press the or button, then select 3D.
To watch in 3D, wear 3D Active Glasses and press the power button on the glasses.
3. Select OK, then press the ENTER
4. Using the or buttons on your remote control,
selects the 3D Mode of the image you want to view.
Some 3D modes may not be available depending on the format of the image source.
Supported formats and operating specifications for Standard HDMI 3D
The 3D formats indicated below are recommended by the HDMI association and must be supported.
Source signal format Standard HDMI 1.4 3D
1920x1080p@24Hz x 2 1920x2205p@24Hz 1280x720p@60Hz x 2 1280x1470p@60Hz 1280x720p@50Hz x 2 1280x1470p@50Hz
The mode is automatically switched to 3D mode for the 3D video input in one of the formats above.
For the Standard HDMI 3D format with 24Hz, the TV is optimized as follows:
Resolution First Display Mode: If Motion Plus is set
to Off, Clear or Standard, you can watch the video at a high resolution optimized to the resolution of the source video.
Judder Reduction Display Mode: When Motion
Plus is set to Smooth or Custom, you can watch a smooth picture without judder.
Enter

button.
Exit
Exit
Before using 3D function...
NOTE
You may notice a small amount of screen flickering
x
when watching 3D images in poor light conditions (from a strobe light, etc.), or under a fluorescent lamp (50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the light or turn the lamp off.
3D mode is automatically disabled in following cases:
x
when changing a channel or the input source, or accessing Media Play or Internet@TV.
Some Picture functions are disabled in 3D mode.
x
PIP and Data broadcasts (MHEG / MHP) are not
x
supported in 3D mode. 3D Active Glasses from other manufacturers may not
x
be supported. When the TV is initially powered on, it may take some
x
time until the 3D display is optimized. The 3D Active Glasses may not work properly if there
x
is any other 3D product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses.
When watching pictures from a 50Hz 3D source with
x
its Game mode On, visually-sensitive viewers may see some flicker on bright images.
Photos of Media Play are shown in “2D 3D”
x
mode only. If you lie on your side while watching TV with 3D
x
active glasses, the picture may look dark or may not be visible.
Be sure to stay within the viewing angle and optimum
x
TV viewing distance when watching 3D pictures.
– Otherwise, you may not be able to enjoy proper 3D
effects.
The ideal viewing distance should be three times or
x
more the height of the screen. We recommend sitting with viewer’s eyes on a level with the screen.
22
English
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
 Setting up the TV with Your PC
Sound Menu
03 Basic Features
 Changing the Preset Sound Mode
Set the input source to PC.
Auto Adjustment
Adjust frequency values/positions and fine tune the settings automatically.
Not available when connecting with an HDMI/DVI cable.
Screen
Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine­tune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen.
Position: Adjust the PC screen position with direction button ( / / / ).
Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
y The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
y If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
SRS TheaterSound
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing impaired.

 Adjusting Sound Settings
Equalizer
Adjusts the sound mode (standard sound mode only).
Balance L/R: Adjusts the balance between the right and
left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth frequencies.
Reset: Resets the equalizer to its default settings.
 Sound Systems, Etc.
SRS TruSurround HD (Off / On)
(standard sound mode only) This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head Related Transfer Function) technology.
SRS TruDialog (Off / On)
(standard sound mode only) This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can be heard more clearly.
English
23
Basic Features
Audio Language
(digital channels only) Change the default value for audio languages.
The available language may differ depending on the broadcast.
Audio Format
(digital channels only) When sound is emitted from both the main speaker and the
audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.
Audio Format option may differ depending on the broadcast. 5.1ch Dolby digital sound is only available when connecting an external speaker through an optical cable.
Audio Description
(not available in all locations) (digital channels only)
This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster.
Audio Description (Off / On): Turn the audio description function on or off.
Volume: Adjust the audio description volume.
AD
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night.
Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.
When Speaker Select is set to External Speaker
TV Speaker: Off, External Speaker: On
x
When Speaker Select is set to TV Speaker
TV Speaker: On, External Speaker: On
x
If there is no video signal, both speakers will be mute.
Additional Setting
(digital channels only)
DTV Audio Level (MPEG / HE-AAC): This function
allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level.
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.
To increase or decrease the volume, adjust between the range 0 and -10 respectively.
SPDIF Output: SPDIF (Sony Philips Digital InterFace)
is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.
Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.
Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).
Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
24
English
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Dual


Default
Automatic
change
Dual
Automatic
change
Dual
 Selecting the Sound Mode
When you set to Dual -, the current sound mode is displayed on the screen.
Audio
Type
A2
Stereo
NICAM
Stereo
If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
Only activated in stereo sound signal.
Only available when the Input source is set to TV.
Mono Mono
Stereo
Dual
Mono Mono
Stereo
Dual
Dual -
Stereo Mono
Dual
Mono Stereo Mono Dual
Dual  
Setup Menu
 Setting the Time
Time
Clock: Setting the clock is for using various timer features of the TV.
The current time will appear every time you press the INFO button.
If you disconnect the power cord, you have to set the clock again.
Clock Mode (Auto / Manual)
Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.
The antenna must be connected in order to set the time automatically.
Clock Set: Set the Day, Month, Year, Hour and Minute manually.
Available only when Clock Mode is set to
Manual.
Time Zone (depending on the country): Select your time
zone.
When Country is set to Others, you can use this function.
This function is only available when the
Clock Mode is set to Auto.
 Using the Sleep Timer
Sleep Timer
after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
To cancel Sleep Timer, select Off.
: Automatically shuts off the TV
03 Basic Features
 Setting the On / Off Timer
Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
On Time
Inactivate
Off Time
Inactivate
Volume
10 TV ATV 1
Repeat
Once
On Time / Off Time: Set the hour, minute, and activate / inactivate. (To activate timer with the setting you’ve chosen, set to Activate.)
Volume: Set the desired volume level. Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select ATV or DTV.
Channel (when the Source is set to TV): Select the
desired channel. Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files to be played when the TV is turned on automatically.
NOTE
If there is no music file on the USB device or the
x
folder containing a music file is not selected, the Timer function does not operate correctly.
When there is only one photo file in the USB
x
device, the Slide Show will not play. If a folder name is too long, the folder cannot be
x
selected. Each USB you use is assigned its own folder.
x
When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.
Timer 1
00 00
00 00
Source Antenna Channel
Sun Mon Tue Wed Thu Fri Sat
Move

Adjust

Enter

Return
English
25
Basic Features
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to activate the timer.
The  mark indicates the day is selected.
Auto Power Off (available only when the TV is turned on by Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.
 Locking Programmes
Security
The PIN input screen appears before the setup screen.
Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.
Child Lock (Off / On): Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme.
Available only when the Input source is set to TV.
Parental Lock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a user-defined 4-digit PIN code. If selected channel is locked, the “ be displayed.
Allow All: Unlock All TV ratings (Not supported in France).
When Parental Lock is set to 18, the PIN input screen appears before changing the channels (France only).
Change PIN: Change your personal ID number required to set up the TV.
If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to “0-0-0-0”: POWER (off)
MUTE 8 2 4 POWER (on).
” symbol will
 Other Features
Language
Menu Language: Set the menu language.
Teletext Language: Set a desired language for teletext.
English is the default in cases where the selected language is unavailable in the broadcast.
Preference (Primary Audio Language /
Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language): Select a language, which will be the default
language when a channel is selected.
Subtitle
Use this menu to set the Subtitle mode.
Subtitle (Off / On): Switches subtitles on or off.
Mode (Normal / Hearing Impaired): Sets the subtitle
mode.
Subtitle Language: Sets the subtitle language.
If the programme you are watching does not support the Hearing Impaired function, Normal automatically activates even if the Hearing Impaired mode is selected.
English is the default in cases where the selected language is unavailable in the broadcast.
Digital Text (Disable / Enable)
(UK only) If the programme broadcasts with digital text, this feature is
enabled.
Network (Network Type / Network Setup / Network Test / SWL(Samsung Wireless Link) / SWL connect)
For details on set up options, refer to the “Network Connection” instructions (p. 30).
General
Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode.
NOTE
Precautions and limitations for game mode
x
– To disconnect the game console and connect
another external device, set Game Mode to Off in the setup menu.
– If you display the TV menu in Game Mode, the
screen shakes slightly.
Game Mode is not available when the input source
x
is set to TV or PC. After connecting the game console, set Game Mode
x
to On. Unfortunately, you may notice reduced picture quality.
If Game Mode is On:
x
Picture mode is set to Standard and Sound mode
is set to Movie.
Equalizer is not available.
26
English
BD Wise (Off / On): Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.
Available when connecting Samsung products that support BD Wise through a HDMI cable.
Menu Transparency (Bright / Dark): Se t the Transparency of the menu.
Melody (Off / Low / Medium / High): Set so that a melody plays when the TV is turned on or off.
Melody is disabled when FastStart is On.
FastStart (Off / On): When the TV is powered on, the screen will come on quickly with this feature.
Common Interface
CI Menu: This enables the user to select from the CAM- provided menu. Select the CI Menu based on the menu PC Card.
Application Info: View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by
phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the
direction of the arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the
common interface slot, in the direction of the arrow so that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal
channel.
Wireless Remote Control
Turn wireless remote controls on or off or give permission to wireless remote controls.
Picture In Picture (PIP)
PIP
You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.
NOTE
For PIP sound, refer to the Sound Select
x
instructions. If you turn the TV off while watching in PIP mode, the
x
PIP window will disappear. You may notice that the picture in the PIP window
x
becomes slightly unnatural when you use the main screen to view a game or karaoke.
While Internet@TV is in operation, the PIP function
x
cannot be used. PIP settings
x
Main picture Sub picture Component, HDMI1/DVI,
HDMI2, HDMI3, HDMI4, PCTV
PIP (Off / On): Activate or deactivate the PIP function.
Channel: Select the channel for the sub-screen.
Size (
picture.
Position (
sub-picture.
Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode.
/  /  / ): Select a size for the sub-
/  /  / ): Select a position for the
In Double (, ) mode, Position cannot be selected.
03 Basic Features
English
27
Basic Features
Support Menu
Self Diagnosis
Self Diagnostic might take few seconds, this is part of the normal operation of the TV.
Picture Test (Yes / No): Use to check for picture
problems.
Sound Test (Yes / No): Use the built-in melody sound to
check for sound problems.
If you hear no sound from the TV’s speakers, before performing the sound test, make sure
Speaker Select is set to TV Speaker in the Sound menu.
The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.
Signal Information: (digital channels only) HDTV
channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.
Troubleshooting: If the TV seems to have a problem,
refer to this description.
If none of these troubleshooting tips apply, contact the Samsung customer service centre.
Software Upgrade
Software Upgrade can be performed via a broadcasting
signal or by network connection or downloading the latest firmware from “www.samsung.com,” to a USB memory device.
Current Version the software already installed in the TV.
Software is represented as “Year/Month/Day_Version”.
Software Upgrade
Current Version 2010/01/18_000001
By USB ► By Online By Channel Standby Mode Upgrade : 2 Hours Later
Alternative Software 2010/01/15_00000
Move

Enter

Return
Installing the Latest Version
By USB: Insert a USB drive containing the firmware upgrade file, downloaded from “www.samsung.com,” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to to write down your settings so that you can easily reset them after the upgrade.
By Online: Upgrade the software using the Internet.
First, configure your network. For detailed procedures on using the Network Setup, refer to the “Network Connection” instructions.
If the internet connection doesn’t operate properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.
By Channel: Upgrade the software using the broadcasting signal.
If the function is selected during the software transmission period, software will be automatically searched and downloaded.
The time required to download the software is determined by the signal status.
Standby Mode Upgrade: A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the LED product. This phenomenon may continue for more than 1 hour until the software upgrade is complete.
Alternative Software (backup): Displays the software version downloaded through By Online. During the software upgrading, When the Upgrade will discontinue from last step, this function be activated.
TV Rear Panel
or
(HDD)
USB Drive
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software.
28
English
Advanced Features
Using an HDMI/DVI Cable / a D-sub Cable
Connecting to a PC
04 Advanced Features
AUDIO OUT
PC OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode Resolution
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT / DTV CEA
640 x 350 720 x 400
640 x 480 832 x 624
1152 x 870
720 x 576 1152 x 864 1280 x 720 1280 x 960
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864
1280 x 1024 1280 x 1024
1280 x 720 1280 x 800 1280 x 800 1280 x 960 1360 x 768 1440 x 900 1440 x 900
1600 x 1200 1680 x 1050
1280 x 720
1280 x 1024
1920 x 1080p 67.500 60.000 148.500 +/+
Horizontal Frequency
(KHz)
31.469
31.469
35.000
49.726
68.681
35.910
53.783
56.456
75.231
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
75.000
65.290
52.500
74.620
Vertical Frequency
(Hz)
70.086
70.087
66.667
74.551
75.062
59.950
59.959
74.777
74.857
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
60.000
59.954
70.000
70.000
Pixel Clock Frequency
(MHz)
25.175
28.322
30.240
57.284
100.000
32.750
81.750
95.750
130.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
162.000
146.250
89.040
128.943
DVI OUT
AUDIO OUT
Sync Polarity
(H / V)
+/-
-/+
-/-
-/-
-/-
-/+
-/+
-/+
-/+
-/-
-/-
-/­+/+ +/+ +/+
-/-
-/­+/+ +/+ +/+ +/+ +/+
-/+
-/+ +/+ +/+
-/+
-/+ +/+
-/+
-/+
-/-
NOTE
For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
x
The interlace mode is not supported.
x
The set might operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
x
English
29
Advanced Features
ANT 2 IN
(
SATELLITE
)
ANT 2 IN
(
AIR/CABLE
)
(
SATELLITE
)
(
AIR/CABLE
)
ANT 2 IN
(
SATELLITE
)
ANT 2 IN
(
AIR/CABLE
)
(
SATELLITE
)
(
AIR/CABLE
)
ANT 2 IN
(
SATELLITE
)
ANT 2 IN
(
AIR/CABLE
)
ANT 2 IN
(
SATELLITE
)
ANT 2 IN
(
AIR/CABLE
)
ANT 2 IN
(
SATELLITE
)
ANT 2 IN
(
AIR/CABLE
)
(
SATELLITE
)
(
AIR/CABLE
)
ANT 2 IN
(
SATELLITE
)
ANT 2 IN
(
AIR/CABLE
)
ANT 2 IN
(
SATELLITE
)
ANT 2 IN
(
AIR/CABLE
)
ANT 2 IN
(
SATELLITE
)
ANT 2 IN
(
AIR/CABLE
)
ANT 2 IN
(
SATELLITE
)
ANT 2 IN
(
AIR/CABLE
)
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.
 Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways:
y You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat
5 cable. See the diagram below.
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
LAN Adapter
TV Rear Panel
Modem Cable
LAN Cable
y You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected
to an external modem. Use Cat 5 cable for the connection. See the diagram below.
TV Rear Panel
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer
(having DHCP server)
LAN Adapter
LAN Cable LAN CableModem Cable
y Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN
port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.
TV Rear Panel
The LAN Port on the Wall
LAN Cable
LAN Adapter
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses.
English
30
Loading...
+ 228 hidden pages