appearance. Product design and specifications may change without notice. CIS languages (Russian, Ukrainian, Kazakhs) are
not available for this product, since this is manufactured for customers in EU region.
* Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product
WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
Use only a properly grounded plug and receptacle.
- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
your set.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily
operable.
Do not allow children to hang onto the product.
Store the accessories (battery, etc.) in a location safely out of the reach of children.
Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.
Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.
Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene,
alcohol, thinners, insecticide, aerial freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product.
Apparatus shall not be exposed to dripping or splashing.
Do not dispose of batteries in a fire.
Do not short circuit, disassemble or overheat the batteries.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time
Be sure to contact an authorised service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity,
chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may cause serious damage to
(especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or
the insulation to deteriorate.
To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug when pulling the
plug from the outlet. Do not touch the power cord with wet hands.
If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and
contact an authorised dealer or service centre.
This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under
environmental considerations. Please contact your local authorities for disposal or recycling information.
Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plug end, adaptors and the point where they exit from the appliance.
To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local
electrical supply.
Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorised dealer immediately. Make sure to pull out the
power cord from the outlet before cleaning.
- Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.
- Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.
apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
- Do not cover this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION
(Please read the appropriate section that corresponds to the marking on your Samsung
Warning! Important Safety Instructions
product before attempting to install the product.)
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
This symbol alerts you that important literature
concerning operation and maintenance has been
included with this product.
English - 3
You will be informed of the administration fee amount before a technician visits.
been read).
(b) you bring the unit to a repair centre and there is no defect with the product (i.e. where the user manual has not been
read).
Warning: Screens can be damaged from direct pressure when
handled incorrectly. We recommend lifting the TV at the edges, as
shown.
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect with the product (i.e. where the user manual has not
- Cables not included can be purchased separately.
- Check for any accessories hidden behind or in the packing materials when opening the box.
- Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
- The items’ colours and shapes may vary depending on the models.
CI Card AdapterIR Extender CableWall mount Adapter
Remote Control & Batteries (AAA x 2)Regulatory Guide
User ManualPower Cord
Warranty Card (Not available in some locations)
What's in the Box?
This Screen!
Don't Touch
English
English - 4
Attaching the TV to the Stand
Mounting the TV on the Wall Using the Wall
- Do not use screws that do not comply with the VESA standard screw specifications.
- Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
- When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
or slanted wall, it may fall and result in severe personal injury.
- Standard dimensions for wall mount kits are shown in the table below.
Wall Mount Kit Specifications (VESA)
The wall mount kit is not supplied, but is sold separately. Install your wall mount on a solid wall perpendicular to the floor. When
attaching the wall mount to other building materials, please contact your nearest dealer. If the product is installed on a ceiling
Before installing any other wall mounting kit, assemble the wall mount adapter provided separately with the TV.
- Refer to "Install manual" included in our wall mounting kit.
Wall mount
Bracket
wall mount on your own.
Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and
serious damage to the product.
Installing the Wall Mount Kit
The wall mount kit (sold separately) lets you mount the TV on the wall.
For detailed information about installing the wall mount, refer to the instructions provided with the wall mount. We recommend
that you contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the
Mount Kit (Optional)
If you mount this product on a wall, it should be mounted only as recommended by the manufacturer.
Make sure you have all the accessories shown, and that you assemble the stand following the provided assembly instructions.
C
TV
Wall mount
Adapter
Product
When using a third-party wall mount, note that the assembling screw length(C) is shown below.
- Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
- Do not mount the TV at more than a 15 degree tilt.
personal injury. Samsung is not liable for these kinds of accidents.
the consumer fails to follow the product installation instructions.
- For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
- Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall, leading to
depending on the wall mount specifications.
Other Cautions
- The actual appearance of the TV may differ from the images in this manual, depending on the model.
- Be careful when you touch the TV. Some parts can be somewhat hot.
10 cm
Installation with a stand.Installation with a wall-mount.
- Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts provided by Samsung
Electronics only.
product falling.
LED-TV
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to
electric shock.
55
Family
InchesVESA Spec.(A * B)
48
Providing Proper Ventilation for Your TV
When you install your TV, maintain a distance of at least 10 cm between the TV and other objects (walls, cabinet sides, etc.) to
ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product caused by an
increase in its internal temperature.
If you use parts provided by another manufacturer, it may cause difficulties with the product or result in injury caused by the
English - 5
10 cm
10 cm
10 cm
10 cm
10 cm
400 X 40021.7 ~ 26.7M84
C (mm)
Standard
Screw
Quantity
10 cm
English
English - 6
To Avoid the TV from Falling
Arrange the cables using the Cable Holder
4. Verify that all connections are properly secured. Periodically check connections for any sign of damage. If you have any
doubt about the security of your connections, contact a professional installer.
- It is safe connecting the string so that the clamps fixed onto the wall are equal
- Untie the string before moving the TV.
to or lower than the clamps fixed on the TV.
3. Connect the clamps fixed into the TV and the clamps fixed onto the wall with
a strong cable and then tie the string tightly.
- Install the TV close to the wall so that it does not fall backwards.
- Screw Specifications: For a 48 ~ 55 inches: M8
purchase screws of the following specifications.
2. Remove the screws from the centre back of the TV, put the screws into the
clamps, and then fasten the screws into the TV again.
- Screws may not be supplied with the product. In this case, please
- Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
type of wall.
1. Put the screws into the clamps and firmly fasten them into the wall. Confirm
that the screws have been firmly installed into the wall.
- You may need additional material such as anchors depending on the
the TV to tip over, resulting in serious injuries or death. Follow all safety precautions
provided in the Safety Flyer included with your TV. For added stability and safety, you can
purchase and install the anti-fall device as described below.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular,
ensure that your children do not hang on to or destabilize the TV. Doing so may cause
- The product colour and shape may
vary depending on the model.
wall
English - 7
3. Insert the “CI or CI+ CARD”.
2. Connect the CI CARD Adapter to the
We recommend that you attach the CI Card adapter and insert the CI card (viewing card) before you mount the
TV on the wall because it may be difficult and dangerous to do this when it is on the wall.
COMMON INTERFACE
port on the product 2.
1. Insert the CI CARD Adapter into the two holes on the product 1.
- Please locate the two holes at the back of the TV next to the
port.
COMMON INTERFACE
“CI or CI+ CARD”.
To connect the CI CARD Adapter, follow these steps.
- We recommend attaching the adapter before installing the wall mount, or inserting the
Attach the adapter as shown.
- To install the CI CARD Adapter, please remove the sticker attached to the TV.
Attaching the CI Card Adapter
TV viewing Card Slot)
- Turn the TV off to connect or disconnect a CI card or CI card adapter.
Connecting to a COMMON INTERFACE slot (Your
Connecting devices to your TV
You can connect various external devices using the connectors located at the back of the product. Check the connectors and
then refer to the assembly instructions provided for more information on supported external devices.
English
English - 8
The LAN Port on the Wall
LAN Cable (Not Supplied)
Network Connection - Wireless
Connect the TV to the Internet using a standard router or modem.
Wireless IP Router or Modem with
a DHCP Server
Connecting the TV to a network gives you access to online services such as the Smart Hub, as well as software updates.
Connecting to a Network
- If you have any problems, please contact a service provider.
- Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be visible.
- The location of the COMMON INTERFACE slot may differ depending on the model.
- A “CI or CI+ CARD” is not supported in some countries and regions, therefore, check with your authorised dealer.
- Insert the “CI or CI+ CARD” in the direction marked on the card.
- When removing the “CI or CI+ CARD”, carefully pull it out as dropping the “CI or CI+ CARD” may damage it.
- You must obtain a “CI or CI+ CARD” from a local cable service provider.
NOTE
the channel list is updated.
- When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating
CI+ CARD” ID, the Host ID, and other information will be displayed in
about 2~3 minutes. If an error message is displayed, please contact
your service provider.
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
- If you don’t insert the “CI or CI+ CARD”, some channels will display
- The pairing information containing a telephone number, the “CI or
the “Scrambled Signal” message.
- The TV does not support network speeds less than or equal to 10Mbps.
- Use Cat 7 cable for the connection.
illustrated starting below:
Network Connection - Wired
There are three main ways to connect your TV to your network using cable, depending on your network setup. They are
Learn where the function buttons are on your remote, such as:
INFO
- This remote control has Braille points on the
persons.
,
CH LIST
,
Turns the TV on and off.
RETURN
,
GUIDE
English - 10
P.SIZE
AD/SUBT.
Shortcuts
: Change the picture size.
.
: Displays the
E-MANUAL
: Displays the
KEYPAD
on the screen, you can easily enter digits,
control content, and use functions.
: With the virtual remote control
: Press this button to use the
sports viewing experience.
search window.
SEARCH
Exits the menu.
: Enable
Football Mode
Displays information on the TV screen.
Displays the EPG (Electronic Programme
Guide).
>
to the e-Manual chapter, Smart Features
Brings up
Smart Hub
Smart Hub
.
Mix or OFF.
Changes channels.
Cuts off the sound temporarily.
Returns to the previous channel.
Power
,
Channel
,
and
Volume
buttons and can be used by visually impaired
Displays and selects available video
sources.
Turns the Set-top box on and off.
and
EXIT
.
SOURCE
,
MUTE
,
Y
,
<
P
>
,
MENU
Accessibility
E-MANUAL
.
for an optimal
applications. Refer
,
TOOLS
,
E
,
English - 11
Remote control sensor
- The TV’s Controller, a small joystick-like button at the right back of the TV, lets you control the TV without the remote
control.
Function menu
Turning on the TV
Turn on the TV using the
- The product colour and shape may vary depending on the model.
P
button on the remote control or TV panel.
Installing the batteries (Battery size: AAA)
- Use the remote control within 7m of the TV.
- Bright lights may affect the performance of the remote control. Avoid using the remote control near special fluorescent
- The colour and shape may vary depending on the model.
lights or neon signs.
2
3
Match the polarities of the batteries to the symbols in the battery compartment.
1
TV Controller
mR
P
English
mode. Connector names may vary depending on the model.
The following options are available in the
TOOLS
Select a port connected to an external device, and press and
hold the Enter button. The following functions are available:
- Available options for each connector may vary.
Edit Name
Rename devices connected to the TV for easier
identification of external sources.
For example, you can designate a computer connected
to the TV via an HDMI-DVI cable as
Source
to the second HDMI connector, press
list, select
Button
For example, to switch to a gaming console connected
button.
- If you do not want to select
Aerial
.
Selecting the video source
You can select a connected external device using the
SOURCE
Initial setup
The initial setup dialogue box appears when the TV is first
activated. Follow the on-screen instructions to finish the initial
setup process, including the selecting the menu language,
scanning channels, connecting to the network, and more.
During each step, either make a choice or skip the step.
You can manually perform this process at a later time in the
System
- If you connect any device to
installation, the
top box
>
automatically.
Setup
English - 12
DVI PC
.
Displays a list of Anynet+ (HDMI-CEC)-compliant devices
CEC)
is
On
.
that are connected to the TV.
- This option is only available when
Disconnect USB Device
Used to safely remove a USB device connected to the
TV. This option is only available when a USB device has
been selected.
Source
screen:
Information
View detailed information about the connected devices.
Anynet+ (HDMI-CEC)
HDMI2
to change the input signal to HDMI
SOURCE
. From the
You can also designate an AV device connected to the
TV via an HDMI-DVI cable as
Alternatively, simply designate a computer connected to
the TV via an HDMI cable as
Channel Source
Set-top box
will be changed to
, please select
Set-
2. Enter a new password and then enter it again to confirm
- If you forgot your PIN code, press the buttons in the
it. The password change is complete.
following sequence to reset the PIN to “0-0-0-0”:
In Standby mode:
MUTE
menu.
HDMI1
before starting the
Changing the TV’s password.
1. Run
the password field. The default password is “0-0-0-0”.
Change PIN
and then enter the current password in
Password Change
System
>
Change PIN
Anynet+ (HDMI-
PC
DVI Devices
.
.
ĺ 8 ĺ 2 ĺ 4 ĺ
POWER
(On)
2. Select
3. Follow the on-screen instructions and register the external device.
Universal remote setup
from the top of the screen. This initiates the universal remote setup process.
Controlling External Devices with the TV Remote
1. Turn on the external device to set up the universal remote function for, and bring up the
remote control signal.
- Certain external devices connected to the TV may not support the universal remote feature.
Setting Up the Universal Remote Control
Connect the IR extender cable to the TV's IR output connector as shown in the diagram and place the transmitter end within
10 cm of the external device's receiver pointing in the direction of the remote receiver. However, there must be no obstacles
between the IR extender cable and the external device. The presence of obstacles interferes with the transmission of the
The universal remote control feature lets you control cable boxes, Blu-ray players, home theatres, and other external devices
connected to the TV using the TV's remote control. In order to use the TV's remote control as a universal remote, you must
first connect the IR extender cable (included).
- You can also use the Anynet+ (HDMI-CEC) function to operate some external Samsung devices with your TV's remote
control without any additional setup. For more information, refer to the e-Manual.
System
- Availability depends on the specific model and area.
>
Universal Remote Setup
Controlling External Devices with the TV Remote
(
Universal Remote Setup
English - 13
)
10 cm
Source
screen.
English
English - 14
item from the search results to load the corresponding page.
Loading Pages using Keywords
Select
Search
from the side of the screen to bring up the search screen. Enter a search term and then select
Additional e-Manual Features
3. Select an item from the list. This opens the e-Manual on the corresponding page.
If a description doesn't fit on a single screen...
You can scroll pages in one of the following ways.
t
Position the focus on the page to display / on the screen. Press
2. Select a category from the side of the screen. Once a selection has been made, the contents of the selected category
1. Select
appear.
e-Manual
. The e-Manual loads.
- Yellow words indicate a menu item; white bold words indicate remote control buttons. Arrows are used to indicate the
menu path. (Example:
Picture
>
Picture Mode
)
Viewing more TV features
Launching the e-Manual
The embedded e-Manual contains information.
- You can also download a copy of the e-Manual from Samsung's website, and read it on your computer or print it out.
The
e-Manual
contains more detailed information on the TV features. Refer to the embedded
Done
. Select an
<
,
>
button.
e-Manual
(
Support
>
e-Manual
).
4. Select
e-Manual
in the popup window and then select
3. From the Options menu on the screen, select
-
Update apps
is shown on the screen only when an update is required.
1. Select the
2. Press and hold the Enter button. The Options menu appears.
e-Manual
item in the
SAMSUNG APPS
Updating the e-Manual to the Latest Version
You can update the e-Manual in the same way as updating apps.
Loading Reference Pages
Select
(
Link
) from the side of a feature-description page to access the corresponding reference page.
- Certain menu options cannot be used.
If you want to read an
Select (
Try Now
) on a feature-description to directly move to the corresponding menu and try out the feature.
e-Manual
entry on a specific screen menu feature, Press the
Accessing the Menu from the e-Manual (Try Now)
Select
to the selected page.
Recent pages
from the side of the screen. A list of previously read pages is shown. Select a page. The e-Manual jumps
page.
Loading Pages from the Index Page
Using the History to Load Previously Read Pages
Select
Index
from the side of the screen to bring up the index screen. Select a keyword from the list to navigate to the relevant
English - 15
Update apps
screen.
Update
. A popup window appears.
. You can update the
e-Manual
to the latest version.
E-MANUAL
button.
English
English - 16
- Some of the pictures and functions above are available for specific models only.
however be a few bright or dark pixels. These pixels will have no impact on the performance of the product.
(Samsung.com > Support > Downloads).
The remote control of the cable/
set top box doesn’t turn the TV
on or off or adjust the volume.
Clean the sensor’s transmission window on the remote.
Try pointing the remote directly at the TV from 1.5 ~ 1.8 m away.
Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set-
Top-Box user manual for the SAMSUNG TV code.
The remote control does not
work.
Reboot the connected device by unplugging it, and then reconnecting the device’s
power cable.
Replace the remote control batteries. Make sure the batteries are installed with their
polarities (+/–) in the correct direction.
Be sure to select the correct input source.
HDMI, it should be connected to an HDMI input on the TV.
Make sure your connected devices are powered on.
match the TV's input connections. For example, if the output of an external device is
There is no picture/video.Check the cable connections. Remove and reconnect all cables connected to the TV
and external devices.
Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-ray etc) to
Try pressing the P button on the TV to make sure the problem is not the remote. If the TV
turns on, refer to the “Remote control does not work” item below
The TV won’t turn on.Make sure the AC power cord is securely plugged into the wall outlet and the TV.
Make sure the wall outlet is working.
- This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. There may,
- To keep your TV running optimally upgrade to the latest firmware on the Samsung website via the USB device USB
please visit “www.samsung.com” and click on Support, or contact the call centre listed on the back cover of this manual.
IssuesSolutions and Explanations
Troubleshooting
If you have any questions about the TV, first refer to the Troubleshooting list below. If none of these troubleshooting tips apply,
.
English - 17
3. Please note: If the screen is too dark while watching TV in a dark environment, this may be due to the
2. To enable or disable the
detected by the Light Sensor.
Eco Sensor
, go to
System
>
Eco Solution
>
Eco Sensor
Do not block the sensor with any material. This may decrease the picture brightness.
1.
Eco Sensor
: This power-saving feature automatically adjusts the screen brightness of the TV according to the ambient light
The Eco Sensor measures the light in the room and optimises the brightness of the TV automatically to reduce power
consumption. This causes the TV to brighten and dim automatically. To turn this function off, go to
Eco Sensor
.
Cautions about the Eco Sensor and Screen
Brightness
and select
On
or
Off
.
Eco Sensor
.
System
>
Eco Solution
>
English
English - 18
Do not spray water directly onto the product. Any liquid
that enters the product may result in product failure, fire, or
electric shock.
Clean the product with a soft damp cloth using a small
amount of water. Do not use a flammable liquid (e.g.
benzene, thinners) or a cleaning agent.
How Does it Work?
- The exterior and screen of the product can get scratched while cleaning it. Be sure to wipe the exterior and screen
off before watching TV.
carefully using a soft cloth to prevent scratches.
agent.
1. Call the Samsung
Contact Centre and ask
for remote support.
2. Open the menu on
your TV and go to the
Support section.
3. Select Remote
Management and
Provide the Pin# to the
Storage and Maintenance
- If a sticker was attached to the TV screen, some debris may remain after you remove the sticker. Please clean the debris
Having a Samsung Tech remotely service your TV is really pretty simple
t
t
Perform a factory reset for your TV
Install recommended firmware updates
t
t
Diagnose your TV
Adjust your TV settings
What is Remote Support?
Samsung's Remote Support service offers you one-on-one support with a Samsung Technician who can remotely:
4. The agent will then
access your TV. That's
it!
English - 19
Standby mode
To decrease power consumption, unplug the power cord when the TV will not be used for a long time.
- Typical power consumption is measured according to IEC 62087 Ed.2
- The design and specifications are subject to change without prior notice.
- For information about the power supply, and about power consumption, refer to the label attached to the product.
With Stand
16.4 kg
With stand
Weight
Without Stand
1078.6 x 673.1 x 294.9 mm
13.5 kg
Screen Size (Diagonal)48 inches55 inches
Dimensions (W x H x D)
Body
1078.6 x 625.9 x 79.2 mm
Stand Swivel (Left / Right)0˚
Sound (Output)40W(10W+10W, Woofer 20W)
Model NameUE48H6870UE55H6870
Display Resolution1920 x 1080
Screen Curvature4200R
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
50°F to 104°F (10°C to 40°C)
5% to 95%, non-condensing
TV Specifications
17.7 kg
20.6 kg
1232.8 x 762.0 x 294.9 mm
1232.8 x 713.3 x 90.6 mm
English
English - 20
This marking on battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these
substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them
through your local, free battery return system.
The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support
and enter the model name.
This equipment may only be used indoors.
This equipment may be operated in all EU countries.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of the batteries in this product
(Applicable in countries with separate collection systems)
Hereby, Samsung Electronics, declares that this TV is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Recommendation - EU Only
t
t
Always try to display any image in full screen. Use the TV set’s picture format menu for the best possible match.
Reduce brightness and contrast to avoid the appearance of after-images. tUse all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for more details.
recommendations below:
t
Avoid displaying the same TV channel for long periods.
Still image warning
Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock or news bars
at the bottom of the screen etc.), or programmes in panorama or 4:3 image format. Constantly displaying still pictures can
cause image burn-in on the LED screen, which will affect the image quality. To reduce risk of this occurring please follow the
Licences
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
This page is intentionally
left blank.
abweichen. Änderungen an Ausführung und technischen Daten vorbehalten. Einige GUS-Sprachen (Russisch, Ukrainisch, Kasachisch) stehen
für dieses Produkt nicht zur Verfügung, da das Gerät für Kunden in der EU hergestellt wurde.
Deutsch - 2
* Die Abbildungen und Illustrationen in diesem Handbuch dienen nur zur Information und können vom tatsächlichen Aussehen des Geräts
Bringen Sie das Gerät nicht an einem instabilen Ort wie z.B. einem wackligen Regal, einem abschüssigen Boden oder einem Ort an, der
Vibrationen ausgesetzt ist.
Lassen Sie das Gerät nicht fallen, und vermeiden Sie Erschütterungen. Wenn das Gerät beschädigt ist, trennen Sie es vom Stromnetz, und
wenden Sie sich an ein Kundendienstzentrum.
Ziehen Sie den Netzstecker aus der Steckdose, und wischen Sie das Gerät mit einem weichen, trockenen Tuch ab. Verwenden Sie keine
Chemikalien wie Wachs, Benzol, Alkohol, Verdünner, Insektizide, Luftverbesserer, Schmiermittel oder Reinigungsmittel. Hierdurch kann das
Aussehen des Geräts beschädigt oder der Aufdruck entfernt werden.
Es dürfen keinesfalls Tropfen oderSpritzer von Flüssigkeiten in das Gerät eindringen.
Entsorgen Sie Batterien niemals in einem Feuer.
Schließen Sie die Batterien nicht kurz, zerlegen und überhitzen Sie sie nicht.
Bei unsachgemäßem Austausch von Batterien besteht Explosionsgefahr. Setzen Sie nur Batterien des gleichen oder eines
gleichwertigen Typs ein.
ACHTUNG: UM DIE AUSBREITUNG VON FEUER ZU VERHINDERN, SORGEN SIE JEDERZEIT DAFÜR, DASS DAS GERÄT
NICHT MIT KERZEN ODER OFFENEM FEUER IN BERÜHRUNG KOMMT.
Lagern Sie die Zubehörteile (Batterie usw.) an einem sicheren Ort außerhalb der Reichweite von Kindern.
- Eine fehlerhafte Erdung kann zu einem elektrischen Schlag oder Schäden am Gerät führen. (Nur Geräte der Klasse I.)
- Staubansammlungen können Stromschläge, Kurzschlüsse oder Brände verursachen, da am Netzkabel Funken auftreten oder die Hitze
zu einer Beschädigung der Isolierung führt.
Führen Sie niemals Metallgegenstände in die Öffnungen dieses Geräts ein. Dies kann zu Stromschlägen führen.
Berühren Sie keinesfalls Bauteile im Geräteinneren, um Stromschläge zu vermeiden. Das Gerät darf nur von einem qualifizierten Techniker
geöffnet werden.
Stellen Sie sicher, dass das Netzkabel fest in die Steckdose eingestöpselt wird. Fassen Sie das Netzkabel am Stecker an, wenn Sie es aus der
Wandsteckdose ziehen. Berühren Sie das Netzkabel niemals mit feuchten Händen.
Wenn das Gerät nicht einwandfrei funktioniert, insbesondere beim Auftreten ungewöhnlicher Geräusche oder Gerüche aus dem Inneren,
trennen Sie es unverzüglich von der Stromversorgung und wenden Sie sich umgehend an Ihren nächstgelegenen Händler oder das nächste
Kundendienstzentrum.
Ziehen Sie auf jeden Fall den Netzstecker aus der Steckdose, wenn das Fernsehgerät längere Zeit nicht verwendet werden soll, weil Sie
beispielsweise längere Zeit abwesend sind (besonders wenn Kinder und ältere Personen allein im Haus bleiben).
Wenden Sie sich an den autorisierten Kundendienst, wenn das Gerät an einem Ort mit hoher Konzentration an Staubpartikeln, außergewöhnlich
hoher oder geringer Raumtemperatur, extrem hoher Luftfeuchtigkeit, in unmittelbarer Nähe zu chemischen Lösungsmitteln oder für den
Dauerbetrieb, z. B. auf Bahn- oder Flughäfen, aufgestellt werden soll.
Verwenden Sie nur ordnungsgemäß geerdete Stecker und Steckdosen.
Wenn Sie das Gerät vom Stromnetz trennen möchten, müssen Sie den Netzstecker aus der Dose ziehen. Deshalb muss der Netzstecker
jederzeit leicht erreichbar sein.
Achten Sie darauf, dass sich Kinder nicht an das Gerät hängen.
Stromversorgung anschließen.
- Stellen Sie keine mit Flüssigkeit gefüllten Behälter (Vasen usw.) auf das Gerät, da dies zu einem Brand oder Stromschlag führen kann.
es direkter Sonneneinstrahlung ausgesetzt ist.
Setzen Sie das Gerät keinesfalls Regen aus, und stellen Sie es nicht in der Nähe von Wasser auf (Badewanne, Küchenspüle, feuchter Keller,
Schwimmbecken usw.). Falls das Gerät dennoch Nässe ausgesetzt war, trennen Sie es von der Stromversorgung und wenden Sie sich
umgehend an den nächstgelegenen Händler. Ziehen Sie vor dem Reinigen des Geräts den Netzstecker aus der Steckdose.
Für dieses Gerät benötigen Sie Batterien. Entsorgen Sie die Batterien gemäß den für Sie geltenden Umweltschutzbestimmungen. Bitte wenden
Sie sich bei Fragen zur ordnungsgemäßen Entsorgung an Ihre örtlichen Behörden.
Überlasten Sie Steckdosen, Verlängerungskabel und Netzteile keinesfalls, da dies zu einem Brand oder Stromschlag führen kann.
Netzkabel müssen so verlegt werden, dass niemand auf das Kabel treten kann oder es durch Gegenstände gequetscht wird, die auf dem Kabel
stehen oder gegen das Kabel drücken. Besondere Aufmerksamkeit muss den Bereichen um Stecker, Steckdosen und dem Punkt zukommen,
an dem das Netzkabel aus dem Gerät herausgeführt wird.
Zum Schutz des Geräts bei einem Gewitter oder längerem Nichtbetrieb trennen Sie das Gerät vom Netz. Trennen Sie darüber hinaus das
Antennenkabel vom Gerät. Auf diese Weise werden Schäden durch Blitzschlag oder Spannungsstöße vermieden.
Stellen Sie sicher, dass die Nennspannung des Gleichstromnetzteils für die örtliche Stromversorgung geeignet ist, bevor Sie das Netzkabel an die
Die Schlitze und Öffnungen im Gehäuse und in der Rückwand oder im Boden sind für die Belüftung erforderlich. Um den zuverlässigen Betrieb
des Geräts zu gewährleisten und es vor Überhitzung zu schützen, dürfen diese Öffnungen keinesfalls blockiert oder bedeckt werden.
- Stellen Sie das Gerät nicht in abgeschlossene Räume wie z.B. in ein Bücherregal oder einen Einbauschrank. Dieser Einbau ist nur dann
- Außerdem darf das Gerät keinesfalls in der Nähe oder über einem Radiator oder Heizkörper aufgestellt werden, oder an Orten, an denen
zulässig, wenn für ausreichende Belüftung gesorgt wird.
TEILE. LASSEN SIE REPARATUREN NUR VON QUALIFIZIERTEM
KUNDENDIENSTPERSONAL DURCHFÜHREN.
ACHTUNG: UM DIE GEFAHR EINES ELEKTRISCHEN
SCHLAGES ZU VERRINGERN, ENTFERNEN SIE NICHT DIE
ABDECKUNG (ODER RÜCKSEITE). IM GERÄTEINNEREN
BEFINDEN SICH KEINE VOM BENUTZER ZU WARTENDEN
STROMSCHLAGGEFAHR NICHT ÖFFNEN
ACHTUNG
(Bitte lesen Sie den Abschnitt zu Ihrem Samsung-Gerät, ehe Sie es installieren.)
Achtung! Wichtige Sicherheitshinweise
Dieses Symbol weist auf eine hohe Spannung im
Innern des Geräts hin. Das Berühren von Teilen im
Geräteinneren ist gefährlich.
Dieses Symbol weist darauf hin, dass diesem
Gerät wichtige Anweisungen zu Betrieb und
Wartung beigefügt sind.
Deutsch - 3
Vor dem Besuch des Technikers werden Sie über die Höhe der Verwaltungsgebühr informiert.
(b) Sie das Gerät in eine Reparaturwerkstatt bringen, und es liegt kein Defekt des Geräts vor (d. h. wenn das
Benutzerhandbuch nicht gelesen wurde)
Warnung: Der Bildschirm kann aufgrund direkter Krafteinwirkung
während eines unsachgemäßen Transports beschädigt werden.
Wir empfehlen daher, das Fernsehgerät beim Tragen wie in der
Abbildung gezeigt an den Ecken des Geräts zu halten.
Verwaltungskosten werden abgerechnet, wenn
(a) auf Ihren Wunsch ein Ingenieur zu Ihnen geschickt wird, und es liegt kein Defekt des Geräts vor (d. h. wenn das
Benutzerhandbuch nicht gelesen wurde)
- Kontrollieren Sie beim Öffnen der Verpackung, ob Zubehör hinter oder in den Verpackungsmaterialien versteckt ist.
Komponenten fehlen sollten, setzen Sie sich bitte mit Ihrem Händler in Verbindung.
CI-KartenadapterIR-VerlängerungskabelAdapter für die Wandhalterung
- Vergewissern Sie sich, dass im Lieferumfang des Fernsehgeräts folgende Komponenten enthalten sind. Falls
- Farbe und Form der Teile können sich je nach Modell unterscheiden.
- Nicht mitgelieferte Kabel können gesondert erworben werden.
Inhalt der Verpackung?
Berühren Sie
diesen
Bildschirm nicht!
Deutsch
Deutsch - 4
lange Schrauben können Schäden an den inneren Bauteilen des Fernsehgeräts verursachen.
- Verwenden Sie keine Schrauben, die länger sind als in der VESA-Standardspezifikation für Schrauben angegeben. Zu
Wandmontage des Fernsehgeräts mit Hilfe der
Befestigen Sie vor der Montage einer anderen Wandhalterung den Wandhalterungsadapter, der separat mit dem Fernsehgerät
Spezifikation (VESA) der Wandhalterung
Die Wandhalterung wird nicht mitgeliefert, sondern ist gesondert erhältlich. Montieren Sie die Wandhalterung an einer soliden
Wand, die senkrecht zum Boden steht. Bei Installation der Wandhalterung auf anderen Trägermaterialien wenden Sie sich bitte
an Ihren Fachhändler. Bei Montage des Geräts an einer Decke oder schrägen Wand kann das Fernsehgerät herunterfallen und
Verletzungen verursachen.
- Die Standardabmessungen der Wandhalterung finden Sie in der nachfolgenden Tabelle.
- Beim Kauf unserer Wandhalterung erhalten Sie ein detailliertes Installationshandbuch sowie alle für die Montage
- Verwenden Sie keine Schrauben, die nicht der VESA-Standardspezifikation für Schrauben entsprechen.
erforderlichen Teile.
geliefert wird.
- Weitere Informationen erhalten Sie in der Montageanleitung unsere Wandhalterungsbausatzes.
Wandhalterung
Kunden selbst durchgeführt wird.
Herstellers einhalten. Wenn das Gerät nicht ordnungsgemäß montiert ist, könnte es herunterfallen, ein Kind
oder einen Erwachsenen ernsthaft verletzen und beschädigt werden.
Anbringen der Wandhalterung
Mit der (separat erhältlichen) Wandhalterung können Sie das Fernsehgerät an einer Wand befestigen.
Detaillierte Informationen zum Montieren der Wandhalterung finden Sie in den Anweisungen zur Wandhalterung. Wir empfehlen
Ihnen, sich beim Anbringen der Wandhalterung von einem Techniker helfen zu lassen. Wir raten davon ab, dies selbst zu
erledigen. Samsung Electronics haftet nicht für Schäden an Gerät oder Personen, wenn die Montage der Wandhalterung vom
Wandhalterung (optional)
Wenn Sie dieses Produkt an einer Wand anbringen, müssen Sie dabei auf jeden Fall die Anweisungen des
Verfügung gestellten Montageanleitung.
Befestigen des Fernsehgeräts am Standfuß
Stellen Sie sicher, dass alle dargestellten Zubehörteile vorhanden sind, und montieren Sie den Standfuß entsprechend der zur
C
Fernsehgerät
Wandhalterung
Adapter für die
Wenn Sie die Wandhalterung eines Fremdherstellers verwenden, beachten Sie die unten angegebene Länge (C) der
Weitere Vorsichtsmaßnahmen
- Das tatsächliche Aussehen des Fernsehgeräts kann je nach Modell von den im Handbuch enthaltenen Abbildungen
- Seien Sie vorsichtig, wenn Sie das Fernsehgerät berühren. Einige Teile können während des Betriebs sehr heiß werden.
abweichen.
10 cm
Aufstellen des Geräts mit dem StandfußInstallation des Geräts mit der Wandhalterung
weil das Gerät herunterfällt.
- Wenn Sie einen Standfuß oder eine Wandhalterung einsetzen, empfehlen wir Ihnen dringend, ausschließlich Teile von
Samsung Electronics zu verwenden.
Fernsehgerät
LED-
Installieren Sie die Wandhalterung nicht bei eingeschaltetem Fernsehgerät. Sie könnten dabei einen
Stromschlag erhalten und sich verletzen.
48
55
ProduktfamilieZoll
Ausreichende Belüftung Ihres Fernsehgeräts
Halten Sie beim Aufstellen des Fernsehgeräts einen Abstand von mindestens 10 cm zu anderen Objekten (Wänden,
Schrankwänden usw.) ein, um eine ausreichende Lüftung zu gewährleisten. Wenn Sie nicht für eine ausreichende Lüftung
sorgen, können aufgrund des Temperaturanstiegs im Innern des Geräts ein Brand oder ein Problem mit dem Gerät die Folge
sein.
Wenn Sie Teile eines anderen Herstellers verwenden, kann es zu Problemen mit dem Gerät oder zu Verletzungen kommen,
Montageschrauben.
- Montieren Sie das Fernsehgerät nicht in einem Winkel von mehr als 15 Grad.
- Samsung haftet nicht für Geräteschäden oder Verletzungen, wenn eine Wandhalterung verwendet wird, die nicht dem
VESA-Standard entspricht oder nicht spezifiziert ist, oder wenn der Verbraucher die Installationsanleitung für das
Produkt nicht befolgt.
- Bei Wandhalterungen, die nicht der VESA-Standardspezifikation für Schrauben entsprechen, hängt die Länge der
- Ziehen Sie die Schrauben nicht zu fest an, weil Sie auf diese Weise das Gerät beschädigen könnten oder weil das Gerät
Schrauben von der Spezifikation der Wandhalterung ab.
dadurch herunterfallen und damit Verletzungen verursachen könnte. Samsung haftet nicht bei derartigen Unfällen.
Deutsch - 5
10 cm
10 cm
10 cm
10 cm
10 cm
400 X 40021,7 ~ 26,7M84
VESA-Spez.
(A * B)
C (mm)
StandardschraubeMenge
10 cm
Deutsch
Loading...
+ 56 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.