Samsung UE55ES8000U, UE40ES8000U, UE46ES8000U User Manual

E-MANUAL

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

EIRE 0818 717100 www.samsung.com

U.K 0330 SAMSUNG (7267864) www.samsung.com

Customer Care Centre

Web Site

LED TV

user manual

© 2012 Samsung Electronics Co., Ltd. All rights reserved.

Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at

www.samsung.com/register

Model _____________ Serial No. _____________

BN68-04061J-03

A detailed User’s Manual is built into your TV.

For more information about how to view this e-Manual see page 32.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual
product appearance. Product design and specifications may be changed without notice.

Digital TV notice

1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and
MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible
DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility
to receive DVB-T or DVB-C signal.

2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial
television and DVB-C is that for the broadcast transmission of digital TV over cable. However, some
differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not
included in this specification. So, they cannot be workable at this moment.

3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the
compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be
guaranteed.

4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an
additional fee for such a service and you may be required to agree to terms and conditions of their
business.

5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work
correctly with some cable service providers.

6. For more information, please contact your local Samsung customer care centre.

The reception quality of TV may be affected due to differences in broadcasting method between

✎

the countries. Please check the TV performance in the local SAMSUNG Authorized Dealer, or the
Samsung Call Centre whether it can be improved by reconfiguring TV setting or not.

Still image warning

Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo,
panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant
displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk
of this effect, please follow below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try do display any image on full screen, use TV set picture format menu for best possible match.

• Reduce brightness and contrast values to minimum required to achieve desired picture quality,

exceeded values may speed up the burnout process.

• Frequently use all TV features designed to reduce image retention and screen burnout, refer to e-Manual
for details.

WARNINGS: Image retention, commonly known as screen burn-in, can occur on most types of

✎

television if the same image is displayed continuously. The most common causes of image retention
are logos that remain stationary on the TV screen. These logos are common on many programmes
received via a Set-top Box. To reduce this risk, avoid displaying still images for long durations and
lower the brightness or contrast settings to decrease the intensity of the picture. Extended viewing
of movies and programmes in aspect ratios that are different from the aspect ratio of the TV may
cause image retention. Always endeavour to avoid black borders top or bottom by using the zoom
function. This will help eliminate the black borders and fit the picture to the entire area of the screen.
Using a video game console may cause image retention and is not recommended. When using a PC
input, avoid displaying still images for long durations and reduce the brightness or contrast settings to
decrease the intensity of the picture.

IMPORTANT: Image retention issues are not covered by your Samsung® warranty.

✎

English - 2

Providing Proper Ventilation for Your TV

When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls,
cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a
problem with the product caused by an increase in its internal temperature.

Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts

✎

provided by Samsung Electronics only.

• If you use parts provided by another manufacturer, it may cause difficulties with the product or result in
injury caused by the product falling.

Installation with a stand. Installation with a wall-mount.

10 cm

10 cm10 cm

Other Warnings

[

The actual appearance of the TV may differ from the images in this manual, depending on the model.

✎

Be careful when you touch the TV. Some parts can be somewhat hot.

✎

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate

collection systems)

This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with
other household waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and how they can take
these items for environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery

return systems)

This marking on the battery, manual or packaging indicates that the batteries in this product
should not be disposed of with other household waste at the end of their working life. Where
marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury,
cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not
properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from
other types of waste and recycle them through your local, free battery return system.

• An administration fee may be charged if either

− (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)

− (b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).

• The amount of such administration charge will be advised to you before any work or home visit is
carried out.

10 cm

10 cm

10 cm

10 cm

English - 3

List of Features

• 3D: This exciting new feature enables you to view 3D content.

• SMART HUB: Using Smart Hub, you can stream movies, videos, and music from the Internet, access
various for pay or free-of-charge applications and view them on your TV.

− Application content includes news, sports, weather forecasts, stock market quotes, maps, photos,
and games.

• AllShare Play: Lets you access, view, or play photos, videos, or music located on USB devices, digital
cameras, mobile phones, and PCs. PCs and mobile phones can be accessed wirelessly, through your
wireless network.

• Anynet+ (HDMI-CEC): Allows you to control all connected Samsung devices that support Anynet+
with your Samsung TV’s remote.

• e-Manual: Provides a detailed, on-screen user's manual that's built into your TV. (p. 32)

• SMART Interaction: Using this function, you can access and control menu options and functions
using speech or gestures. (p. 17)

English - 4

Accessories

Please make sure the following items are included with your TV. If any items are missing, contact your

✎

dealer.

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

✎

Check that there is no accessory hidden behind packing materials when you open the box.

✎

CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

[

• Smart Touch Control & Batteries (AA x 2)

• Remote Control & Batteries (AAA x 2)

• User Manual

Scart Adapter Holder-Wire stand Holder Ring x 4

CI Card Adapter IR Blaster & Batteries (AA x 4)

Assembling the Stand Wire Holder

• Power Cord

• Cleaning-Cloth

• Samsung 3D Active Glasses

Wireless Keyboard (Sold Separately)

Wireless Keyboard

English - 5

Using the TV's Controller (Panel Key)

The TV's Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV
without the remote control.

The product colour and shape may vary depending on the model.

✎

Angle adjustment wheel

Remote control sensor

When you use the Smart Touch Control, the standby LED does not
work (except P button).

Camera rear

Function menu

mR

P

TV Controller

Follow these instructions facing the front of your TV.

✎

When selecting the function by moving the controller to the up/down/left/right directions, be sure

✎

not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right
directions.

Before you use the TV camera for the first time you should check whether tape is attached at the rear

✎

of the TV camera. TV camera can be then used after adjusting the camera angle. If you do not intend
to use the TV camera, move the camera lens upwards so that the lens is not revealed. In this case,

Face recognition and Motion control are not available.

Power on Turn the TV on by pressing the Controller when the TV is in standby

mode.

Adjusting the volume Adjust the volume by moving the Controller from side to side when the

power is on.

Selecting a channel Select a channel by moving the Controller upwards and downwards

when the power is on.

Using the Function menu To view and use the Function menu, press and release the Controller

when the power is on. To close the Function menu, press and release
the Controller again.

Selecting the MENU (m) With the Function menu visible, select the MENU (m) by moving the

Controller to the left. The OSD (On Screen Display) Menu appears.
Select an option by moving the Controller to the right. Move the
Controller to the right or left, or backwards and forwards to make
additional selections. To change a parameter, select the it, and then
press the Controller.

Selecting the SMART HUB
(™)

Selecting a Source (s) With the Function menu visible, open the Source (s) by moving the

Power off (P) With the Function menu visible, select Power off (P) by moving the

With the Function menu visible, select SMART HUB (™) by moving the
Controller upwards. The SMART HUB main screen appears. Select an
application by moving the Controller, and then pressing the Controller.

Controller to the right. The Source screen appears. To select a Source,
move the Controller back and forth. When the source you want is
highlighted, press the Controller.

Controller downwards, and then press the Controller.

To close the Menu, Smart Hub, or Source, press the Controller for more than 1 second.

✎

English - 6

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric
power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long
periods of time (when you are away on vacation, for example). It is best to unplug the power cord.

Connecting to an Aerial

Plug the power cord into a wall outlet only after you have made all other connections.

✎

If you are connecting your TV to a cable or satellite box using HDMI, Component, or Composite

✎

connections, you do not need to connect the ANT IN jack to an aerial or a cable connection.

Using two-way radio mobile and portable units or amateur radio or AM radio near your TV may cause

✎

the TV to malfunction.

Use caution when you move or swivel the TV if the aerial cable is tightly connected. You could break

✎

the aerial jack off the TV.

VHF/UHF

Aerial

Satellite

Cable

or

English - 7

Viewing the Remote Control

This is a special remote control for the visually impaired persons and has Braille points on the Power,

✎

Channel and Volume buttons.

Turns the remote control
light on or off. When on, the
buttons become illuminated
for a moment when pressed.
(Using the remote control

Turns the TV on and off.

Displays and selects the available

video sources. (p. 16)

with this button set to On
will reduce the battery usage
time.)

Returns to the previous
channel.

Have direct access to channels.

Alternately select Teletext ON,

Double, Mix or OFF.

Adjusts the volume.

Brings up the Smart Hub

applications. See e-Manual

chapter Advanced Features →

Smart Hub.

Opens the OSD.

Quickly select frequently used

functions.

Use this button in a specific

feature.

Returns to the previous menu.

Use these buttons according to

the direction on screen.

Use these buttons in a specific

feature. For details, refer to

e-Manual.

HISTORY CAMERA

S

AD/SUBT.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the
screen.

Displays the EPG (Electronic
Programme Guide).

Displays information on the TV
screen.

u/d/l/r: Move the cursor

on-screen menu item.

E: Selects the menu and

changes the corresponding
item value.

Exits the menu.

HISTORY: Displays a list of

recently used functions.

Family Story: Connect to

Family Story application. See

e-Manual chapter Advanced
Features → Family Story.

CAMERA: Connect to

Camera application.

SUPPORT: Lets you use

various support functions
including e-Manual. (p. 32)

AD/SUBT.: Turns the audio

description on and off (not
available in some locations).
/ Displays digital subtitles.
See e-Manual chapter Other
Features → Subtitle.

W: Turns the 3D image on

or off. See e-Manual chapter
Advanced Features → Using
the 3D function.

English - 8

Installing batteries (Battery size: AAA)

Match the polarity of the batteries to the symbols in the battery compartment.

1

2

3

NOTE

✎

• Install the batteries so that the polarity of the batteries (+/-) matches the illustration in the battery
compartment.

• Use the remote control within 23 feet of the TV.

• Bright light may affect the performance of the remote control. Avoid using when near special
fluorescent lights or neon signs.

• The colour and shape may vary depending on the model.

Setup (Initial Setup)

When you turn the TV on for the first time, a sequence of prompts and screens will assist you in configuring
basic settings. To begin Setup, press the P button on your remote.

Setup is available only when the input source is set to TV. See "Changing the Input Source" (p. 16).

✎

To return to the previous step in the Setup sequence, Select Previous.

✎

Before you begin, make sure you have connected the TV to an aerial or a cable connection and that

✎

the TV is plugged in. (p. 7).

To start the Setup select Start.

✎

Menu Language:

1

Select a Language.

Use Mode: Select the

2

Home Use Mode.

Network Settings:

3

Configure network
settings

To connect later,

✎

select Skip.

Software Upgrade:

4

Upgrading the
software to latest
version

To upgrade later,

✎

select Skip.

Select a menu language you want using your remote, and then select
Next. The TV will display a menu using the selected language after
next step.

Select Home Use using your remote, and then select Next.

Store Demo mode is for retail environments.

To set up your network connection, select Next using your remote.
If you do not know your network set up information or want to set to
it later, select Skip. For more detailed information, refer to “Setting
up the Wired or Wireless Network” in the e-Manual for set up
requirements and instructions, and the Network Connection section of
this manual (p. 24). You can set up the network connection later using
the Network menu.

Select Next to upgrade TV software. Your TV will automatically
upgrade, if your TV need a software upgrade. If you want to upgrade
later, select the Skip. For more information, refer to Software
Upgrade (Preference Features → Support Menu) in the e-Manual.

This may take some time, depending on network status.

✎

English - 9

5

6

7

8
9

10

11
12

Select Country.

(Depending on the
country)

Auto Tuning (1):
Selecting how you
watch your TV

Auto Tuning (2):
Selecting a search
options and Region
Selection (Depending
on the country)

Clock: Setting the
Clock Mode

Time Zone

(Depending on the
country): Setting the
your Time Zone

Voice and motion
control: Setting the

Voice and motion
control function.

Setup Complete Select Close to finish.

Set the Universal
Remote

Select the appropriate country.

After selecting the country in the Country menu, some models

✎

may proceed with an additional option to setup the pin number.

Let’s find and store channels on your TV. Do you need to search for
channels?

• Yes, I need to.: All the channels available will be found and stored
on your TV.

• No, I don’t need to.: My set-top box provides all the channels that
are available, so I don't need to search for channels.

Select the channel source to memorise. When setting the aerial
source to Cable, a step appears allowing you to assign numerical
values (channel frequencies) to the channels. For more information,
refer to Auto Tuning (Channel Menu → Memorizing Channels) in the
e-Manual.

When Air or Cable is selected first: After all Air or Cable channels

✎

are stored, the step for storing Satellite channels is displayed.

When Satellite is selected first: After all Satellite channels are

✎

stored, the step for storing Air or Cable channels is displayed.

Select Stop at any time to interrupt the memorization process.

✎

• Auto: Set the current time automatically.

• Manual: Allows you to manually set the current date and time.

This step is only available when the clock mode is set to Auto.

• Auto: Set the time zone automatically.

• Manual: Set the time zone manually.
If you selected Manual, you can select whether to turn DST

✎

(Daylight Savings Time) On or Off. (Depending on the country)

You can turn the Voice and motion control function On or

✎

Off. Select Off or On, and then select Next. For more detailed
information, refer to “SMART Interaction” (p.17)

The completed settings are displayed.

✎

1. Turn on the POWER button on the bottom of the IR Blaster, and
then press the PAIRING button.

2. Select Ye s to start the Universal Remote Setup.

For more detailed information about the Universal Remote Setup,

✎

refer to "Setting up the Universal Remote Control" section in the
manual (page 30).

If You Want to Reset This Feature...

Menu → System →Setup

Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the Change PIN function.

You should do Setup (Menu → System) again at home although you did in shop.

If you forget the PIN code, press the remote control buttons in the following sequence in Standby

✎

mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).

English - 10

Connecting to AV Devices (Blu-ray Players, DVD Players, etc.)

Using an HDMI Cable for an HD connection (up to 1080p, HD digital signals)

For the best quality HD picture, we recommend using an HDMI connection.

Use with DVD players, Blu-ray players, HD cable boxes, and HD Set-Top-Box satellite receivers.

HDMI connection

BD Player

HDMI OUT

HDMI Cable
(Not Supplied)

HDMI to DVI connection

BD Player

HDMI Cable
(Not Supplied)

DVI OUT

AUDIO Cable

AUDIO OUT

(Not Supplied)

R-AUDIO-L

HDMI IN 1 (DVI), HDMI IN 2 (ARC), HDMI IN 3 (MHL)

✎

• For the best picture and audio quality, connect digital devices to the TV using HDMI cables.

• An HDMI cable supports digital video and audio signals, and does not require an audio cable.

− To connect the TV to a digital device that does not support HDMI output, use an HDMI to DVI
cable and audio cables.

• If you connect an external device to the TV that uses an older version of HDMI, the video and audio
may not work. If this occurs, ask the manufacturer of the device about the HDMI version and, if it is
out of date, request an upgrade.

• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.

• We recommend using a basic high-speed HDMI cable or an HDMI cable that is Ethernet
compatible. Note that this product does not support the Ethernet function via HDMI.

• This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note
that the ARC function is supported by the HDMI IN 2 (ARC) port only.

− If 3D Auto View is set to On, some functions such as SMART HUB may be disabled. In this
case, set 3D Auto View or 3D Mode to Off.

English - 11

• The ARC function allows digital audio to output via the HDMI IN 2 (ARC) port on the TV. It can be
enabled only when the TV is connected with an audio receiver that supports the ARC function.

• This product supports the Mobile High-Definition Link (MHL) function via an HDMI-MHL cable. Note
that the MHL function is supported by the HDMI IN 3 (MHL) port only.

• The MHL function lets you display a mobile device's screen via the HDMI IN 3 (MHL) port on the
TV. It can be enabled only when the TV is connected with a mobile device that supports the MHL
function. For more detailed information, see "Using the MHL function" in e-Manual.

• When you use MHL devices via a MHL cable, Picture Size is set to Screen Fit automatically. But
if you use MHL devices via an HDMI cable, Picture Size is not set to Screen Fit automatically.
To view an original size, select Screen Fit in the Picture Size menu (Menu → Picture → Picture
Size).

• If you use MHL devices via an HDMI cable, The TV will be recognized as the HDMI input. In this
case, the TV may work differently than when you use MHL devices via a MHL cable.

For best cable connection to this product, be sure to use cables with a maximum thickness as

✎

below:

• Maximum thickness - 0.55 inches (14mm)

English - 12

Using a Component (up to 1080p) or an Audio/Video (480i only) and a Scart Cable

Scart Adapter
(Supplied)

R

W

B

R

Y

SERVICE: Connector for service only.

Component Cable
(Not Supplied)

Scart Cable
(Not Supplied)

Audio Cable
(Not Supplied)

RR

B

Y

EXT

VCR or DVD

SCART connection

In Ext. mode, DTV Out supports MPEG SD Video and Audio only.

✎

When you connect a Video cable to AV IN 1, the Colour of the AV IN 1 [VIDEO] jack (green) will not

✎

COMPONENT OUT

PRPBY

BD Player

Component connection

W

AUDIO OUT

R-AUDIO-L

Audio
Cable
(Not
Supplied)

W

R

AUDIO OUT

R-AUDIO-L

VIDEO OUT

BD Player

AV connection

Video Cable
(Not Supplied)

Y

match the video cable (yellow).

To obtain the best picture quality, the Component connection is recommended over the A/V

✎

connection.

English - 13

Connecting to a PC

Using an HDMI cable or an HDMI to DVI cable

Your PC may not support an HDMI connection.

✎

Use your PC speakers for audio.

✎

PC connection

HDMI OUT

DVI OUT

AUDIO OUT

HDMI Cable

(Not Supplied)

HDMI to DVI Cable
(Not Supplied)

Audio Cable

(Not Supplied)

The optimal resolution is 1920 X 1080 @ 60 Hz. See the Display Resolution page for all available
resolutions (page 38).

NOTE

✎

• For an HDMI to DVI cable connection, you must use the HDMI IN 1 (DVI) jack.

• For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to
the HDMI IN 1 (DVI) jack on the TV. Use the PC's speakers for audio.

• PC (D-Sub) input is not supported.

English - 14

Audio Connections – Using and Optical (Digital) or a Headphone Connection

DVD home theatre connection

OPTICAL

Optical Cable
(Not Supplied)

Headphones connection

Not Supplied

DIGITAL AUDIO OUT (OPTICAL)

✎

• When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the
volume of both the TV and the system.

• 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1
CH.

• When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack.
When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver.
When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top­Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the
home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from
your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.

Headphones H: You can connect your headphones to the headphones output on your set. While

✎

the headphones are connected, the sound from the built-in speakers will be disabled.

• Sound function may be restricted when connecting headphones to the TV.

• Headphone volume and TV volume are adjusted separately.

• The headphones jack supports only the 3 conductor tip-ring-sleeve (TRS) type.

English - 15

Changing the Input Source

Source

™ → Source

When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or switch
to your cable box or STB satellite receiver, you need to change the Source.

■ TV / Ext. / HDMI1/DVI / HDMI2 / HDMI3 / AV / Component

1. Press the ™ button on your remote. The Smart Hub screen appears.

2. Select Source. The Source screen appears.

3. Select a desired external input source.

Alternatively, you can access the Source screen by selecting the Source s button on your

✎

standard remote or selecting Source with the Smart Touch Control (see page 25).

You can only choose external devices that are connected to the TV. In the displayed Source list,

✎

connected inputs are highlighted.

How to Use Edit Name

Edit Name lets you associate a device name to an input source. To access Edit Name, open the Tools

menu when the Source list is displayed. The following selections appear under Edit Name:

■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI
PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Select an input jack, and then select the
name of the device connected to that jack from the list that appears. For example, if you have your
Blu-ray player attached to HDMI IN 2, select Blu-ray for that input.

If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI cable, assign PC to HDMI1/DVI in

✎

Edit Name.

If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to

✎

HDMI1/ DVI in Edit Name.

If you connect an AV device to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI

✎

Devices to HDMI1/DVI in Edit Name.

Information

You can see detailed information about the selected external device.

Refresh

If the external devices are not displayed in the Source list, open the Tools menu, and then select Refresh.
The list will display all connected devices.

Alternatively, you can refresh the Source list screen by selecting a using your remote

✎

Refresh button/function only available if Anynet+ (HDMI-CEC) function is set to On.

✎

English - 16

SMART Interaction

Using this function, you can access and control menu options and functions using speech, gestures or
face recognition.

INFORMATION BOOKLET DISCLAIMER

• Face Recognition Log-in
In order for Face recognition to function, a thumbnail image of your face will be stored in your TV for

logging-in purposes.

Logging into the Smart Hub using Face recognition may be less secure than using an ID and
password.

• TV Camera Usage
Before using the TV Camera, you should be aware that under some circumstances and under certain

legal conditions your misuse of the TV Camera can result in legal liability for you. By using the TV
Camera, you agree that you will not use the camera (i) in locations where cameras are generally
prohibited (such as bathrooms, locker rooms or changing rooms), (ii) in any manner that will result in an
invasion of a person’s privacy or (iii) in violation of any applicable laws, regulations or statutes.

Voice Control

You can use only your voice to switch the channel or adjust the volume level while focusing on the TV
screen, which removes the need for the conventional remote control.

Menu → System → Voice and motion control → Voice Control

Enable or disable the voice recognition function. Lets you access and control menu options and functions
using speech.

For accurated voice recognition, refer to the Standard Voice Command list at the Samsung web site

✎

(www. samsung.com → support → Manuals & Downloads).

Voice Control function recognition can be affected by unclear pronunciation, voice level, or

✎

surrounding noise.

To use Voice Control, you must pronounce words and phrases clearly and correctly in the language

✎

you selected in Language.

Ambient noise may cause Voice Control to malfunction. (Appropriate surrounding noise: Below

✎

40dB)

Your TV can "hear" your voice commands in two ways:

− Using the TV’s microphone. (Distant Recognition)
We recommend using Voice Control function within about 13 ft of your TV. You can check the usable

✎

distance by using Voice Control Environment Test (System → Voice and motion control → Voice
Control → Voice Control Environment Test).

− Using the VOICE˜ button on your remote. (Close Proximity Recognition)
When you use the TV's microphone, the words may not be recognized because of ambient noise. If

✎

this occurs, try using the VOICE˜ button on your remote. The TV will be able to recognize a voice
command more easily.

The VOICE˜ button on your remote is always activated. If you want to use the TV's microphone, turn

✎

on Voice Control (System → Voice and motion control → Voice Control).

English - 17

If a menu option or function is not supported by the Voice Control function, we suggest trying the

✎

Motion control function. To use the Motion control, raise your hand while opening it toward the
screen, hold it for a moment and then wave it 3–4 time to the left and right. Motion control starts. If
the Motion control starts, the cursor is displayed at the center of the screen and the Motion guide
bar size is at the bottom of the screen.

■ Voice Control
Turns the Voice Control function on or off.

The VOICE˜ button on your remote is always activated.

✎

■ Language
Select the recognition language you want to use.

■ Trigger words
You can select the Trigger Words that start the Voice Control function. Alternatively you can turn on

your TV using the Trigger Words if Voice Control function is set to On.
If the Trigger Words is set to Hi TV, say Hi TV Power On.
If the Trigger Words is set to Smart TV, say Smart TV Power On.

■ Voice command bar size
Set the Voice command bar size mode to Minimum or Full.

Minimum displays the least number of words and phrases you can use.
Full displays all the words and phrases.

■ Voice Sensitivity
Set the sensitivity of Voice recognition.

− Howling: Set echo level.

− Recognition responsiveness: Set the responsiveness level of Voice recognition.

■ Voice Control Environment Test
You can test the noise level on the TV microphone.

− Noise Test: This test checks the noise level of the TV microphone. Select Next using your remote.
The test will start and should only take a few seconds. Please keep as quiet as possible during the
test.

− Mic & Speaker Test: This test checks the noise level of the TV microphone and speaker. Select
Start using your remote. The test will start and should only take a few seconds. Please keep as
quiet as possible during the test.

Available only when Speaker Select is set to TV Speaker.

✎

− Voice Control Test: This test checks the volume level and clarity of your voice when using Voice
Control. Select Start using your remote. The test will start. Please say a guide message as loud
and clearly as you can to complete this test.

If the test is not completed, select Retest, and then say a guide message loudly and clearly

✎

again.

To use the Voice Control function, follow these steps:

If Voice Control function is set to On, the TV may be turned on automatically by effect of the ambient

✎

environment.

1. Speak the Trigger words that you selected using the microphone embedded in the TV or press and

hold the VOICE˜ button on your remote. The TV displays the Voice Control Environment Test.

If you use the Voice Control, the volume will be set to 5 automatically.

✎

2. Speak a word or phrase listed in the Voice Control Environment Test. If you use the VOICE˜ button

on your remote, release the button.

Pronounce the word or phrase clearly and correctly in the language you selected in Language.

✎

3. Wait until recognition is complete, and then speak the next command.
To exit the Voice Control mode, speak a Trigger words or "Cancel" using the TV's microphone,

✎

or press the VOICE˜ button on your remote again.

English - 18

Using the Voice Text Input Mode

The Voice Text Input mode is useful especially when you search for a long sentence from sources (e.g.
applications, Your Video, AllShare Play).

1. Speak "Search All" while in the Voice Control mode.

When you use a QWERTY keypad screen, you can use the Voice Text Input Mode. Speak the

✎

Trigger words that you selected using the microphone embedded in the TV or press and hold the

VOICE˜ button on your remote.

2. Say the word or phrase you wish to search for.

3. The TV executes the spoken function.

Voice Control performance levels will vary based on the language spoken.

✎

Major commands to control the TV operations by voice

■ TV Power Off

− turn off the TV.

■ Source

− The Source window appears.

■ Channel Up/Down

− switch the channel.

■ Volume Up/Down

− adjust the volume level.

■ Mute On/Off

− mute the sound or release it.

Motion control

Use a specific gesture to switch the channel or adjust the volume level as well as to move the mouse
pointer to a desired position while in web surfing with Smart Hub.

Menu → System → Voice and motion control → Motion control

Enable or disable the Motion control function. Lets you control your TV by moving the TV cursor using
specific gestures.

Some applications may not support Motion control.

✎

We recommend using Motion control function within about 5 - 13 ft of your TV. TV Camera's

✎

recognition range may differ depending on the angle of camera or other conditions. You can check
the recognition range of TV camera by using Motion control environment test (System → Voice
and motion control → Motion control → Motion control environment test).

■ Motion control

Turns the Motion control function on or off.

■ Motion guide bar size

Set the Motion guide bar size mode between Minimum or Full.

■ Motion control environment test

You can test the brightness of the room and the camera angle.

English - 19

− Brightness Test: This test checks to see if your room is bright enough for Motion control to work
properly. Select Start using your remote. The test will start and should take only a few seconds.

− Camera Angle Test: Start Camera Angle Test Select Start using your remote. Please put yourself
in the rectangle on the screen by adjusting the camera or moving around. If you are not located in
the correct position, the test may not work properly. When done, please spread your hand in the
direction of the camera, and shake it three or four times from side to side.

To use the Motion control function, follow these steps:

1.

To use the Motion control, raise your hand while opening it toward the screen, hold it for a moment and
then wave it 3 – 4 time to the left and right. Motion control starts. If the Motion control starts, the cursor
is displayed at the center of the screen and the Motion guide bar size is at the bottom of the screen.

2. Control the TV using your hands.

Note that the Motion control function closes if your hands go out of the camera range.

✎

While using the Motion control, if you use the other device (i.e. remote control, keyboard, etc.),

✎

Motion control closes.

Controlling the TV with your hands using gestures

Access Motion Control

■

− Action: Spread your hand in the direction of the camera, and shake it three or four times from side
to side.

Pointing Navigation

■

Moves the cursor to the position you want.

− Action: Spread your hand and guide the cursor to position you want.

■ Run

Selects an item or executes a command that is indicated by the cursor or is highlighted.

− Action: Clench your fi st.

■

Back

Return to the previous menu.

− Action: Spread your hand and rotate it counter clockwise.

■ Channel / Volume Control

Changes the channel or adjust the volume.

If you use the Motion control function while watching a channel, the channel / volume control

✎

screen appears.

− Action: Use the Pointing Navigation gesture to move the cursor to the channel or volume
controller, and then use the Run gesture to adjust the channel or volume.

If you use the Run gesture once, it has the same effect as pressing a button on your remote. If you

✎

hold the Run gesture, it has the same effect as pressing and holding a button on your remote.

■ Scroll

Scroll the page in the direction you want. For example, suppose that you want to scroll down.

Some applications may not support this function.

✎

1. Move the cursor to the bottom of the screen (page scroll zone) using the Pointing Navigation
gesture.

2. Move the cursor to the centre of the screen using the Pointing Navigation gesture.

3. The page will move down.

English - 20

Face recognition

Once you register your face through the camera installed on the TV, you can use the face recognition
function to access the contents provided by Smart Hub that requires your login information.

™ → Tools → Settings → Account Manager → Change account information → Register face

Enable or disable the Face recognition function. Lets you register your face in your Samsung account.
Also, you can log in to the Samsung account using the Face recognition function without inputting your
account ID or your account password.

You can register your face in only one account.

✎

To register your face in your Samsung account, follow these steps:

To use this function, you must log into Smart Hub. If you don't have a Samsung Account, you

✎

should create one before using this function. To create your Samsung Account, refer to “Creating an
Account” (Advanced Features → Smart Hub) in the e-Manual.

1. On the Smart Hub screen, open the Tools menu using your remote, and then select Settings.

2. Select Account Manager. The Account Manager screen appears.

3. Select Change account information. The Change account information screen appears.

4. Select Register face. If you agree to use facial recognition, select OK.

5. Enter your account password.

6. Move your face into the facial lines at the centre of the screen, and then wait until the facial lines

changes from red to green.

If Face recognition fails, select Retry and try again.

✎

7. When finished, your face is now registered in your Samsung account.

To log in to your Samsung account using Face recognition, follow these steps:

If you use Face recognition to log into Smart Hub, it may be less secure than logging in with a password.

1. With the Smart Hub screen displayed, select a using your remote. The ID/password screen appears.

2. Select Face Recognition Mode. The Face recognition screen appears.

To return to the ID/password screen, select Password mode.

✎

3. The TV starts Face recognition. Face the front of the TV screen. The TV will recognize your face
automatically.

If the TV fails to recognize your face, try again.

✎

4. The TV logs you into your Samsung account automatically.

If the TV recognizes two or more registered faces, the Samsung account list appears. Select your

✎

account to log in.

If your face is unregistered, you can register your face in your Samsung account. Follow steps 4

✎

through 5 in the “To register your face to your Samsung account” procedure above.

If you have no account, you can create one. For more detailed information, refer to “Creating an

✎

Account” (Advanced Features → Smart Hub) in the e-Manual.

English - 21

Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)

Attaching the CI Card Adapter

Attach the adapter as shown below.

To connect the CI CARD Adapter, follow these steps.

We recommend attaching the adapter before

✎

installing the wall mount, or inserting the “CI or CI+
CA RD”.

To install the CI card adapter, please remove the

✎

sticker attached to the TV.

1. Insert the CI CARD Adapter into the two holes on the
product 1.

Please find two holes on the rear of the TV. The two holes are beside the COMMON INTERFACE

✎

port.

2. Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2.

3. Insert the “CI or CI+ CARD”.

We recommend that you insert the CI card before you mount the TV on a wall. It may be
difficult to insert after mounting. Insert the card after attaching the CI Card Adapter on TV. It is
difficult to attach the module if you insert the card before attaching.

Using the “CI or CI+ CARD”

To install the CI card adapter, please
remove the sticker attached to the TV.

TV Rear

To watch paid channels, the “CI or CI+ CARD” must be inserted.

• If you don’t insert the “CI or CI+ CARD”, some channels will
display the message “Scrambled Signal”.

• The pairing information containing a telephone number, the “CI or
CI+ CARD” ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.

• When the configuration of channel information has finished, the
message “Updating Completed” is displayed, indicating the
channel list is updated.

English - 22

NOTE

✎

• You must obtain a “CI or CI+ CARD” from a local cable service provider.

• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or
CI+ CARD” may cause damage to it.

• Insert the “CI or CI+ CARD” in the direction marked on the card.

• The location of the COMMON INTERFACE slot may be different depending on the model.

• “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized
dealer.

• If you have any problems, please contact a service provider.

• Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or
will not be seen.

The Evolution Kit Slot (Kit Sold Separately)

The evaluation kit is designed so that you can keep upgrading the hardware specifications and apply the
latest software version to the television.

TV Rear

This socket is designed to accept an extension device called Evolution Kit. The Evolution Kit enables the
TV to run a variety of the latest applications for a better user experience.

The Evolution Kit, which may not be available depending on the product, will be sold separately in 2013 or
later.

English - 23

Network Connection

You can set up your TV so that it can access the SMART TV applications. through your local area network
(LAN) using a wired or wireless connection.

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem.

Wireless IP sharer

The LAN Port on

the Wall

Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols.
Samsung recommends using IEEE 802.11n. When you play the video over a IEEE 802.11b/g connection,
the video may not play smoothly.

Most wireless network systems incorporate a security system that requires devices that access the
network through an access point or wireless router (typically a wireless IP Sharer) to transmit an encrypted
security code called an access key.

If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP,
TKIP or TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in
compliance with new Wi-Fi certification specifications.

(Router having

DHCP server)

LAN Cable

TV

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network
setup. They are illustrated below:

The Modem Port on the Wall

The LAN Port on the Wall

The TV does not support network speeds less than or equal to 10Mbps.

✎

Use Cat 5 or 6 (STP Type*) cable for the connection. (*Shielded Twisted Pair)

✎

External Modem

(ADSL / VDSL / Cable TV)

LAN CableModem Cable

LAN Cable

TV Rear Panel

TV Rear Panel

English - 24

The Smart Touch Control Guide

Improved user convenience has been provided so that you can switch the channel and adjust the volume
with just your fingertips while focusing on the TV screen. In addition, the built-in Touch Pad removes the
need for a mouse when you change the menu settings and search for something on the Internet.

For more detailed information about Smart Touch Control, see "Using the Smart Touch Control" in

✎

e-Manual.

You can use the MIC to give Voice

Control commands. Simply press the

˜

VOICE

Voice Control function can be

✎

button.

affected recognition by unclear
pronunciation, voice level, or
surrounding noise.

Turns the TV on and off.

Š

: Displays a list of recently used

functions. You can select a function

again using the Touch Pad easily and

quickly.

Y

: Adjusts the Volume.

Displays the shortcut functions list.

You can select a function using the

Touch Pad.

RETURNR: Returns to the previous

menu.

VOICE

˜

: Lets you access the Voice

Control function. When you press

the button, the TV displays the

command list. You can speak using

the microphone embedded in your

remote.For more detailed information

about the Voice Control function,

see "SMART Interaction" in the

e-manual or see page 32.

NUMBER

š

: Displays the Number

button screen. You can select a

number using the Touch Pad.

Brings up the Smart Hub

applications. See the e-Manual

chapter Advanced Features →

Smart Hub.

To exit an application that is

✎

running easily, press the ™
button.

TV STB BD

RETURN VOICE NUMBER

LED to show the active device.

Displays Colour and playing
control functions. You can select
a function using the Touch Pad.

: Use these buttons
according to the directions on
screen.

Playing control buttons: Use
these buttons in a specific
feature. For details, refer to the
e-Manual.

T: Quickly select frequently used

functions. Use this button in a
specific feature. For details, refer
to e-Manual.

< P >: Changes channels.

Touch Pad

• Drag on the Touch Pad to
move the focus on the screen.

• Click on the Touch Pad to run
the focused item.

• If you don't press any button
within 30 seconds, the Smart
Touch Control is set to Sleep
mode automatically. To wake
up the Smart Touch Control,
press the Touch Pad.

• If you press and hold the Touch
Pad, it has the same effect as
pressing the MUTEM button
on your remote. However, this
action scrolls the page on a
Web Browser.

• Press the Touch Pad or

RETURNR button to return to

the general mode.

English - 25

Installing batteries (Battery size : AA)

2

11

1. Press the back of the remote at the very bottom with both thumbs, and then slide the battery cover up
in the direction of the arrow.

2. Install two batteries so that the polarity of the batteries (+/-) matches the illustration in the battery
compartment.

3. Slide the cover down in the direction of the arrow to close the battery cover.

Initial Pairing

IR receiver

30cm ~ 4m

TVSTB BD

RETURN VOICE NUMBER

<Connecting>

TVSTBBD

RETURN VOICE NUMBER

• Smart Touch Control

<Pairing complete>

After you have run the Initial Setup on your TV, you should connect your Smart Touch Control to your TV.

1. Point the Smart Touch remote control toward the IR Sensor of the TV and press any key on the Smart
Touch remote control.

2. The connection icons appear on the bottom left of the screen, and the TV connects to your Smart
Touch Control automatically.

If you want to perform the pairing process again, press the reset button in the centre of the back

✎

cover using a pin or the tip of an unbent paper clip. The Smart Touch Control will be initialized.

• Smart Touch Control PAIRING Reset button

Calibrating the Touch Pad

To calibrate the Touch Pad on the Smart Touch Control, follow these steps:

1. Press the NUMBERš button for 3 seconds. The calibration starts.

2. When done, all the LEDs on the top of the Smart Touch Control blink twice simultaneously.

While calibrating, don't touch the Touch Pad.

✎

If the Touch Pad loses accuracy, re-calibrate the Touch Pad by repeating Steps 1 and 2.

✎

English - 26

Using the Touch Pad

To display the shortcut functions list on the bottom of the screen, press the ‹ button at the bottom of the
Touch Pad. This list include Menu, Source, CH List, 3D and other functions.

To display the colour and playing control functions on the top of the screen, press the
top of the Touch Pad.

RETURN VOICE NUMBER

To Move the Highlight: Rest your finger on the Touch Pad, and then slide it from one side to the other,
from top to bottom, or bottom to top.

To move the Highlight continuously, flick your finger across the Touch Pad from right to left, left to

✎

right, top to bottom, or bottom to top.

To Select an item: Press the Touch Pad.

button on the

RETURN VOICE NUMBER

Using the Mute function

− If you press and hold the Touch Pad, it has same effect as pressing the MUTEM button on your

remote.

− However, if you press and hold the Touch Pad when using Web Browser, the Touch Pad switches to
the Scroll mode. When you press the Touch Pad again, the Scroll mode switches general mode.

− Press the Touch Pad or RETURNR button to return to the general mode.

English - 27

To Enter a channel number through Smart Touch Control

1. While watching a broadcast, press the NUMBERš button on the Smart Touch Control. The TV

displays the number button screen.

2. Using the Touch Pad, highlight a number, and then press the Touch Pad. The TV displays a list of
channels that start with the number you selected.

3. Using the Touch Pad, highlight the channel in the list you want, and then press the Touch Pad.

You can also change the channel by touching the up or down channel icon on the Touch Pad. If you
touch the Touch Pad immediately after, the TV displays the list of memorised channels. Select a channel
by moving or flicking your finger up or down, and then pressing the Touch Pad.

To Display a History of the Channels You Watched

Press the Š button on the left side of the Touch Pad.

To Display the Tools Menu

Press the T button on the right side of the Touch Pad.

English - 28

The IR Blaster Guide

2

1

The IR Blaster converts the Smart Touch Control to a universal remote control to operate the devices
connected to the TV.

When pressing a button or tapping the Touch Pad on the Smart Touch Control, the IR Blaster takes the
command from the Smart Touch Control and sends it to the indicated device as infrared signal.

Pairing Button

ON

Power Switch

OFF

Installing batteries (Battery size : AA)

1

1

2

1

OPEN

OPEN

Initial Pairing

IR receiver

30cm ~ 4m

OPEN

PAIRING

1

Device Indicator LED

IR Blaster shows the
pairing state.

OPEN

1. Hold the both sides of the battery
holder and pull it out.

OPEN

2. Install four batteries so that the polarity
of the batteries (+/-) matches the

OPEN

illustration in the battery compartment.

3. Push it back.

• IR Blaster

<Connecting>

<Pairing complete>

1. When you turn the IR Blaster on, the LED blinks.

OPEN

ON

OFF

PAIRING

OPEN

2. Move the IR Blaster to the direction of your TV's IR receiver, and then press
the PAIRING button once shortly on the bottom of the IR Blaster.

3. The connection icons appear on the bottom left of the screen, and the TV
connects to IR Blaster automatically.

If the connection process failed, please turn off and on the IR Blaster, try

✎

again from step2.

To set an Universal Remote Control after pairing

✎

an IR Blaster, select Ye s.

To use IR Blaster, universal remote

control setup needs to be complete. Do

you want to continue with setup?

OK Cancel

English - 29

Setting up Smart touch control to use as a Universal Remote Control

Lets you control a Set-Top-Box (STB) or a BD player or both connected to the TV using your Smart Touch
Control. After you connect the device to the TV, the Smart Touch Control can control the navigation,
number, and other keys needed to operate and control the device.

The Universal Remote Control can adjust TV's volume, but STB's volume cannot be adjusted. Watch

✎

STB after adjusting STB's volume to appropriate level.

Depending on the version of an application, the Welcome to Universal Remote Setup. instructions

✎

may differ. In this case, please follow the instructions on the screen.

To connect the external device to your Smart Touch Control, follow these steps:

1. Select Set up a device to control, and then press the

Touch Pad.

What do you want to do?

2. Select an external device from the connected devices, and
then press the Touch Pad.

3. Select the port used to connect the external device, and
then press the Touch Pad.

Make sure that the selected device is on. If it is turned

✎

off, turn the power on and press Refresh.

4. Select Search brands/TV service providers, and then
press the Touch Pad. A keyboard and an entry field appear.
Enter the first few letters of the brand name of your device
using the Smart Touch Control, and then select Done at the
bottom of the keyboard. In the list that appears below the
entry field, select the brand name of your device, and then
press the Touch Pad.

If you want to search the brand of STB (Set-Top box),

✎

you can search the STB by using the brand name or a
cable provider.

5. Select Search model, and then press the Touch Pad. A
keyboard and an entry field appear. Enter the first few letters
and numbers of the model name of your device using the
Touch Control, and then select Done at the bottom of the
keyboard. In the list that appears below the entry field, select
the model name of your device, and then press the Touch
Pad.

If the search for model name does not work properly,

✎

search with a part of the model name or use the search
for recommended model code.

For more information on the search for recommended

✎

model code function, refer to page 31.

Add a device to control

View remote control settings

Which device do you want to control?

Set-top box

Blu-ray/DVD player

Select a device to
control. The device
you select must be
powered on and
connected to your TV.

Which port is your Set-top box plugged in to?

HDMI2

HDMI3

AV1

AV2

Component

What is the brand/TV service provider of Set-top box?

Search brands/TV service providers

What is the model number of your Set-top box?

Search Model

Recommended model

Select the port that
the Set-top box is
connected to.

If the port you want to
select is deactivated,
please power on
Set-top box you want to
connect and press the
refresh button.

Select 'Search brands
/ TV service provider'
then enter the brand
name/service provider
of your Set-top box.

Check the model
number of your Set-top
box. Then select
'Search Model' and
enter the correct model
number for your Set­top box.

Previous

Previous

Next

Refresh

Previous

Next

Previous

Next

Previous

Next

English - 30

6. Select Download, and then press the Touch Pad. Download
the confi guration data for the IR Blaster in the same way.

Setup data for your device will now be
downloaded to your Smart Touch Control.

Select Download on the TV screen using your
Smart Touch Control.

Previous

Download

7. When all the settings are complete, select the Complete
button and press the Touch Pad.

To reset IR Blaster and Smart Touch Control, press the ‹

✎

button on Smart Touch Control, and then select Universal
remote setup.

Using the Search for recommended model code.

1. In the Search model step in the integrated remote control
setup, select the Recommended model and press the Touch
Pad.

2. Select Download to download the recommended model
code.

Universal remote setup complete.

Congratulations! Your Set-top
box-Samsung connected
via Component is now ready
to use.

Now you can use the Watch
TV(set-top box) option to
control your set-top box

Universal remote setup

What is the model number of your Set-top box?

Search Model

Recommended model

If you can't fi nd your exact
model, select Recommended
model. The model code
recommended by the brand/
TV service provider will be
downloaded.

Setup data for your device will now be
downloaded to your Smart Touch Control.

Select Download on the TV screen using your
Smart Touch Control.

Previous

Set up another

Complete

Previous

Next

Previous

Download

3. Point the Smart Touch Control fowards to the IR sensor of the
external device and press the Touch Pad to test if the device
works.

4. Point the Smart Touch Control fowards to the IR sensor of the
external device and press the Touch Pad to test if the device
works.

When you use the BD home theater by using Universal Remote, some buttons may not be supported.

✎

Point your remote towards the Set-top box, then press
the button below until the power is turned off and on on
your Set-top box.

TEST

Is it working?

Yes, go to the next step.

No, try the test with a different code set.

Point your remote towards the Set-top box, then press
the button below until the power is turned off and on on
your Set-top box.

TEST

Is it working?

Yes, go to the next step.

No, try the test with a different code set.

In this case, we recommend to use Anynet+ (HDMI-CEC) function.

English - 31

Previous

Next

Previous

Next

How to view the e-Manual

You can fi nd instructions for your TV’s features in the e-Manual. To open the e-Manual, press the

SUPPORT button on your standard remote or select Support (‹ → Support) using the Smart Touch

Control.

You can also access it through the menu:

Menu → Support → e-Manual

When you run the e-Manual after you select menu, the manual for the selected menu opens.

Access the e-Manual

To use the e-Manual, follow these steps:

1. When you need help, select Support using your remote. The
Support screen appears.

2. Select e-Manual using your remote. The e-Manual screen

appears.

3. Select a desired category.

4. Select a desired topic. The e-Manual displays the page you want to see.

Blue words in e-Manual refer to menu options or selections in the TV's on screen menu.

✎

Green icons in the e-Manual refers to a button on your remote.

✎

Arrow steps (e.g. Menu → Support → e-Manual) in the e-Manual signify the sequence of steps

✎

required to access an option or activate a function.

Accessing the e-Manual from the Menu

When using the Menu and you want to fi nd out more about a feature, highlight the item in the menu, press
“Support” and select “e-Manual”

How to toggle between an e-Manual topic and the corresponding OSD menu(s).

Changing the Preset Picture Mode

Picture

Picture Mode

Back Light

Contrast

Brightness

Sharpness

Colour

Tint (G/R)

This function is not enabled in some menus.

✎

You can’t use the Tr y n ow function if the menu is not available.

✎

Changing the Preset Picture Mode

Picture Mode

Menu → Picture → Picture Mode

Picture modes apply preset adjustments to the picture.

N When connecting a PC using the HDMI-DVI cable, you can only
select Entertain and Standard.

• Dynamic

Suitable for a bright room.

• Standard

Suitable for a normal environment.

G50

Picture

Picture Mode

Back Light

Contrast

Brightness

Sharpness

Colour

Tint (G/R)

Changing the Preset Picture Mode

Changing the Preset Picture Mode

Picture Mode

Menu → Picture → Picture Mode

Picture modes apply preset adjustments to the picture.

N When connecting a PC using the HDMI-DVI cable, you can only
select Entertain and Standard.

• Dynamic

Suitable for a bright room.

• Standard

Suitable for a normal environment.

1. To go to the topic's corresponding menu option, select a using your remote.

2. To return to the e-Manual screen, select Support using your remote.

English - 32

Using the coloured and function buttons with the e-Manual

• Scroll bar: Scroll the e-Manual screen up or down.

• l / r: Moves to the previous or next chapter.

• a Try now: Move the OSD menu that corresponds to the

topic. To return to the e-Manual screen, select Support
using your remote.

• b Home: Moves to the e-Manual home screen.

• { Position: Each time you select {, using your remote, you

change the position of the e-Manual screen.

• } Index: Displays the Index screen.

• R Return: Return to the previous screen.

How to search for a topic on the index page

1. Select } using your remote. The Index screen appears.

2. To search for a topic, select a letter. The Index displays a

list of topics and keywords that begin with the letter you
selected.

3. Select a topic or keyword you want.

4. The e-Manual page with the topic appears.

To close the Index screen, press the RETURNR button.

✎

To Change the screen position of the e-Manual

If the e-Manual screen is not fully visible because of the OSD Menus screen, you can change the
e-Manual screen's position.

1. Move the Highlight to the e-Manual screen of by pressing the SUPPORT button on your standard
remote or select Support using the Smart Touch Control.

2. Press the { button on your standard remote, or select { using the Smart Touch Control. Each time
you select { using your remote, the position of the e-Manual will change.

English - 33

Installing the Wall Mount

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the wall mount.
Contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it
yourself.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you
elect to install the TV on your own.

Preparing before installing Wall-Mount

Case A. Installing the SAMSUNG Wall-Mount Case B. Installing another company’s Wall-Mount

1

To install a wall-mount, use the Holder-Ring 1.

1

English - 34

Wall Mount Kit Specifications (VESA)

The wall mount kit is not supplied, but sold separately.

✎

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building

✎

materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and
result in severe personal injury.

NOTE

✎

• Standard dimensions for wall mount kits are shown in the table below.

• When purchasing our wall mount kit, a detailed installation manual and all parts necessary for
assembly are provided.

• Do not use screws that do not comply with the VESA standard screw specifications.

• Do not use screws that are longer than the standard dimension or do not comply with the VESA
standard screw specifications. Screws that are too long may cause damage to the inside of the TV
set.

• For wall mounts that do not comply with the VESA standard screw specifications, the length of the
screws may differ depending on the wall mount specifications.

• Do not fasten the screws too tighty; this may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.

• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified
wall mount is used or the consumer fails to follow the product installation instructions.

• Do not mount the TV at more than a 15 degree tilt.

• Always have two people to mount the TV on a wall.

Product Family inches

40 200 X 200

LED-TV

46~60 400 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury due to electric shock.

VESA Spec.

(A * B)

Standard

Screw

M8 4

Quantity

English - 35

Storage and Maintenance

If you attached some stickers on the TV screen, some debris may remain after removing the sticker.

✎

Please clean it to watch TV.

Do not spray water directly onto the product. Any
liquid that goes into the product may cause a
failure, fi re, or electric shock.

Clean the product with a soft cloth dampened in
a small amount of water. Do not use a fl ammable
liquid (e.g. benzene, thinners) or a cleaning agent.

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to
fall. In particular, ensure your children do not hang over or destabilize
the TV. Doing so may cause the TV to tip over, causing serious injuries
or death. Follow all safety precautions provided in the included Safety
Flyer with your TV. For added stability and safety, you can purchase
and install the anti fall device as described below.

To Avoid the TV from Falling

1. Put the screws into the clamps and fi rmly fasten them onto the wall.

Confi rm that the screws have been fi rmly installed onto the wall.

You may need additional material such as an anchor depending

✎

on the type of wall.

Since the necessary clamps, screws, and string are not supplied,

✎

please purchase these additionally.

2. Remove the screws from the back centre of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.

Screws may not be supplied with the product. In this case,

✎

please purchase the screws of the following specifications.

Screw Specifications

✎

• For a 19 ~ 27 inch: M4

• For a 32 ~ 75 inch: M8

3. Connect the clamps fi xed onto the TV and the clamps fi xed onto the wall with a strong cable and then
tie the string tightly.

NOTE

✎

• Install the TV near to the wall so that it does not fall backwards.

• It is safe to connect the string so that the clamps fi xed on the wall are equal to or lower than the
clamps fi xed on the TV.

• Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for
failure. If you have any doubt about the security of your connections, contact a professional installer.

English - 36

Troubleshooting

If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply,
please visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover
of this manual.a

Issues Solutions and Explanations

The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet

and the TV.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem

is not the remote. If the TV turns on, refer to “Remote control does not
work” below.

There is no picture/video. • Check cable connections (remove and reconnect all cables connected

to the TV and external devices).

• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video
outputs to match the connections to the TV input. For example, if an
external device’s output is HDMI, it should be connected to an HDMI
input on the TV.

• Make sure your connected devices are powered on.

• Reboot the connected device by reconnecting the device’s power

cable.

The remote control does not
work.

The cable/set top box remote
control doesn’t turn the TV on
or off, or adjust the volume.

Some of above pictures and functions are available at specific models only.

✎

You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.

✎

com → Support → Downloads) by USB.

• Replace the remote control batteries with the poles (+/–) in the right
direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 5~6 feet away.

• Programme the Cable/Set remote control to operate the TV. Refer to

the Cable/Set user manual for the SAMSUNG TV code.

English - 37

Display Resolution

Mode Resolution

IBM

MAC

VESA

DMT

640 x 350

720 x 400
640 x 480

832 x 624

1152 x 870

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600

1024 x 768

1024 x 768

1024 x 768

1152 x 864

1280 x 720

1280 x 800

1280 x 1024

1280 x 1024

1366 x 768

1440 x 900

1600 x900RB

1680 x 1050

1920 x 1080

Horizontal

Frequency (KHz)

31.469

31.469

35.000

49.726

68.681

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

67.500

45.000

49.702

63.981

79.976

47.712

55.935

60.000

65.290

67.500

Vertical

Frequency (Hz)

70.086

70.087

66.667

74.551

75.062

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.000

59.810

60.020

75.025

59.790

59.887

60.000

59.954

60.000

Pixel Clock

Frequency (MHz)

25.175

28.322

30.240

57.284

100.000

25.175

31.500

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

74.250

83.500

108.000

135.000

85.500

106.500

108.000

146.250

148.500

Sync Polarity

(H / V)

+/-

-/+

-/-

-/-

-/-

-/-

-/-

-/-

+/+

+/+

+/+

-/-

-/-

+/+

+/+

+/+

-/+

+/+

+/+

+/+

-/+

+/+

-/+

+/+

NOTE

✎

• The interlace mode is not supported.

• The set might operate abnormally if a non-standard video format is selected.

English - 38

Specifications

Display Resolution

1920 x 1080

Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity

TV System

Colour/Video System

Sound System

HDMI IN

Stand Swivel (Left / Right)

Analogue: B/G, D/K, L, I (Depending on your country selection)

Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60

Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0

BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC.

Video: 1080 24p, 1080p, 1080i, 720p, 576p, 480p

Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits.

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing

Digital: DVB-T2/DVB-C/DVB-S2

0˚

Model Name UE40ES8000 UE46ES8000 UE55ES8000
Screen Size 40 inches 46 inches 55 inches
Sound

(Output)

10 W X 2

Dimensions (WxHxD)
Body
With stand

906.3 x 540.1 x 30.8 mm

906.3 x 571.3 x 176 mm

1038.7 x 614.7 x 30.8 mm

1038.7 x 653.7 x 210 mm

1230.3 x 722.3 x 30.8 mm

1230.3 x 761.6 x 210 mm

Weight
Without Stand
With Stand

9.55 kg

11.8 kg

11.98 kg

14.6 kg

16.6 kg

19.3 kg

English - 39

Smart Touch Control

Model Name RMCTPE1

Battery (AA x 2)
To extend the battery life, use of alkaline battery is
recommended

Batteries (AAx2)

Power

Input

Output

Features

MBR

Voice

Bluetooth

Setup

Operating

Compatibility

Dimension

Weight

Source

Button 14 Keys
Touch Pad Capacitive Touch Sensor (45mmx55mm)
Indicator Device Indicator LED x 3
IR Infrared Emitting Diode x 1
Touch Control Absolute Coordinate
MBR Universal Control
Voice Voice Transfer via Bluetooth
Bluetooth Bluetooth 2.1 Supported
MBR Database Coverage Global
Supported Device Mode 3 Mode (TV, STB, BD)
Maximum Working Distance 12m
Voice Transfer Bluetooth HID protocol
Supported Audio Data Rate 16KHz, 16bit
Suggested Sound Level -15.5dB (from 0dB Full-scale)
RF 2.4GHz, CSM Band
Pairing Method IR Triggered Standard Pairing
Maximum Pairing Distance 4m (Line of Sight, Targeting IR Receiver on TV)
Maximum Working Distance 10m (Line of Sight)
Pairing with TV Ye s
Programming MBR TV Widget needed
Operating Temperature 32°F to 104°F (0°C to 40°C)
Working Distance IR : Normal 10m, Max 12m / BT : 10m
Working Hours 3 month (200 times button pressed / day)
LED TV Above LED E7000
PDP TV E8000
Set (mm) 154x52x19.5
Set (without Batteries)(g) 119
Set (Including Batteries)(g) 165

Accessory

English - 40

IR Blaster

Model Name VG-IRB2000

Battery (AA x 4)
To extend the battery life, use of alkaline battery is
recommended

Batteries (AAx4)

Power

Input

Output

Features

MBR

Bluetooth

Setup

Operating

Compatibility

Dimension
(WxDxH)

Weight

Accessory

Source

Button 2 Keys (Pairing, Power on/off)
Indicator Indicator LED x 1
IR Infrared Emitting Diode x 5
MBR Universal Control
Bluetooth Bluetooth 2.1 Supported
MBR Database Coverage Global
Supported Device Mode 3 Mode (TV, STB, BD)
Maximum Working Distance 8m
RF 2.4GHz, CSM Band
Pairing Method IR Triggered Standard Pairing
Maximum Pairing Distance 4m (Line of Sight, Targeting IR Receiver on TV)
Maximum Working Distance 10m (Line of Sight)
Pairing with TV Yes
Programming MBR TV Widget needed
Operating Temperature 32°F to 104°F (0°C to 40°C)
Working Distance IR : Normal 10m, Max 12m / BT : 10m
Working Angle 360 degree
Working Hours 3 month (200 times button pressed / day)
LED TV Above LED E7000
PDP TV E8000
Set (mm) W95×D79×H65
Package (mm) W88×D71×H102
Set (without Batteries)(g) 86.5
Set (Including Batteries)(g) 178.5
Package(g) 30.6

Design and specifications are subject to change without prior notice.

✎

For information about power supply, and more about power consumption, refer to the label attached

✎

to the product.

Typical power consumption is measured according to IEC 62087 Ed.2

✎

English - 41

Recommendation - EU Only

• Hereby, Samsung Electronics, declares that this LED TV is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.

• The official Declaration of Conformity may be found at http://www.samsung.com, go to Support >
Search Product Support and enter the model name.

• This equipment may only be used indoors.

• This equipment may be operated in all EU countries.

Licence

English - 42

Warning! Important Safety Instructions

Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to
install the product.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). THERE ARE

NO USER SERVICEABLE PARTS INSIDE. REFER ALL

SERVICING TO QUALIFIED PERSONNEL.

y The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.To ensure reliable

operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

– Do not cover the slots and openings with a cloth or other materials.
– Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
– Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

– Give your product 10 cm (4 inch) clearance from the wall.
y Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.
y Do not place heat generating items such as candles, ashtrays, incense, flammable gas or explosive materials near the product.
y Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.
y Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet

basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer
immediately. Make sure to pull out the power cord from the outlet before cleaning.

y This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly

under environmental considerations. Please contact your local authorities for disposal or recycling information.
y Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
y Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against

them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.
y To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or cable system.

This will prevent damage to the set due to lightning and power line surges.
y Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor

corresponds to the local electrical supply.
y Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.
y To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
y Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug

when pulling the plug from the outlet. Do not touch the power cord with wet hands.
y If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it

immediately and contact an authorized dealer or service centre.
y Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended

period of time (especially when children, elderly or disabled people will be left alone in the house).

– Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and

heat or the insulation to deteriorate.

y Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low

temperatures,high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc.

Failure to do so may cause serious damage to your set.
y Use only a properly grounded plug and receptacle.

– An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

y To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall

be readily operable.
y Do not allow children to hang onto the product.
y Store the accessories (battery, etc.) in a location safely out of the reach of children.
y Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.
y Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.

This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.

This symbol alerts you that important literature
concerning operation and maintenance has
been included with this product.

WARNING - TO PREVENT THE SPREAD OF FIRE,
KEEP CANDLES OR OTHER OPEN FLAMES
AWAY FROM THIS PRODUCT AT ALL TIMES.

Warranty Card

UNITED KINGDOM REPUBLIC OF IRELAND

(EIRE)

This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective
materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from
whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will
comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our
Authorised Service Centres are available from:

Samsung Electronics U.K. Ltd.

Customer Care Centre

PO Box 479

GATESHEAD NE9 9BJ

Tel: 0330 SAMSUNG (7267864) / Fax: [phone] (UK & Northern Ireland)

Tel: [phone] / Fax: [phone] (EIRE Only)

WARRANTY CONDITIONS

1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and

is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been

defaced.

2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.

3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No re-imbursement

will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products

caused by such repair work will not be covered by this warranty.

4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in
order to conform to national or local technical or safety standards in force in any country other than the one for which the
product was originally designed and manufactured.

5. This warranty covers none of the following:

a) Periodic check ups, maintenance and repair or replacement of parts due to normal wear and tear.
b) Cost relating to transport, removal or installation of the product.
c) Misuse, including the faiure to use this product for its normal purposes or incorrect installation.
d) Damage caused by Lightning, Water, Fire, Acts of God, War, Public Disturbances, incorrect mains voltage, improper

ventilation or any other cause beyond the control of Samsung.
e) Spillage of food or liquid or use of any other hazardous substances, which may effect the product.
f) Performance due to differences in broadcasting method between countries

6. This warranty is valid for any person who legally acquired possession of the product during the warranty period.

7. The consumers statutory rights in any applicable national legislation whether against the retailer arising from the purchase

contract or otherwise are not affected by this warranty. Unless there is national legislation to the contrary, the rights under
this warranty are the consumers sole rights and Samsung, its subsidiaries and distributors shall not be liable for indirect
or consequential loss or any damage to records, compact discs, videos or audio taper or any other related equipment or
material.

8. Some products may differ from these guidelines. Please check with your dealer or the local Samsung web-site.

United Kingdom

Web: www.samsung.com

Wiring the Mains Power Supply Plug (UK Only)

IMPORTANT NOTICE

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on
the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.

Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of
the same colour as the pin face of the plug. Replacement covers are available from your dealer.

If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you
should obtain a suitably approved extension lead or consult your dealer for assistance. However, if there is no alternative but to
cut off the plug, remove the fuse and then safely dispose of the plug.

Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows :

The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire
coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

WARNING:

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

This page is intentionally

left blank.