Press and hold the MENU/123 button on the Samsung Smart Control. The Voice Recognition screen
appears. When the Voice Recognition icon appears on the screen, speak commands slowly, in a
moderately loud voice, into the microphone on the Samsung Smart Control.
"
This function is only supported by the models with the Samsung Smart Control.
"
For more information, refer to "Controlling the TV with Your Voice."
Controlling the TV with Your Motion
"
This function is only supported by the models with the Samsung Smart Control.
Setting up Motion Control
(MENU/123) MENUSystemMotion Control
Perform Motion Control Environment Test, then finish the settings required to run motion control,
such as how to adjust Pointer Speed and whether to show Animated Motion Guide.
System
Setup
Sports Mode
Menu Language English
Smart Security
Universal remote setup
Voice Recognition
Motion Control
"
Your TV's menu may differ from the image above, depending on the model.
Controlling the TV using motions
(MENU/123) MENUSystemMotion ControlMotion Control
Set Motion Control to On.
1.
Face the TV camera, raise your hand to a comfortable position, and then move your index finger
2.
to the left or right slowly with it fully extended upwards.
Move your hand left or right slowly to move the pointer to a function.
3.
Curl your index finger down to select a function, and then raise it again to run the selected
4.
function.
"
This function is not available on certain models in specific geographical areas.
"
Motion Control is available in either direction control or motion pointing mode.
"
To use this function, your TV should be connected to the optional TV camera.
"
For more information, refer to "Controlling the TV using Motions (Motion Control)."
Using the Samsung Smart Control
"
The Samsung Smart Control may not be provided with specific model and country.
Operating the TV with the POINTER button
Place a finger on the POINTER button and move the Samsung Smart Control. The pointer on the
screen moves in the direction you moved the Samsung Smart Control. Move the pointer to one of the
following icons on the screen, and then press the POINTER button.
: Displays the On-screen Remote.
●
: Allows you to adjust the volume or select speakers.
●
: Displays the channel list.
●
: Launches Smart Hub.
●
Setting up the Samsung Smart Control
(MENU/123) MENUSystemSmart Control Settings
Configure the basic settings for using the Samsung Smart Control.
System
Universal remote setup
Voice Recognition
Motion Control
Time
Notifications
Device Manager
Smart Control Settings
"
Your TV's menu may differ from the image above, depending on the model.
Pairing the TV to the Samsung Smart Control
When you turn on the TV, the Samsung Smart Control is paired to the TV automatically. To re-pair it
to the TV, press the ① and ② buttons on the Samsung Smart Control simultaneously for 3 seconds or
more.
Improving the Viewing Experience of Sports Events
Activating Sports Mode
(MENU/123) MENUSystemSports Mode
Set Sports Mode to On. The TV automatically configures the picture and sound settings so that they
are suitable for soccer events.
System
Accessibility
Setup
Sports Mode
Menu Language English
Smart Security
Universal remote setup
Voice Recognition
"
You can zoom in the screen while you are using the sports mode. Move the focus to the part of screen to
magnify.
"
Your TV's menu may differ from the image above, depending on the model.
"
The actual name may differ from specific geographical areas.
"
For more information, refer to "Making Sports programmes More Realistic with Sports Mode."
Editing Channels
Running the Edit Channel function
(MENU/123) MENUBroadcastingEdit Channel
Broadcasting
Auto Tuning
Aerial Terrestrial
Channel List
Guide
Schedule Manager
Edit Channel
Edit Favourites
"
Your TV's menu may differ from the image above, depending on the model.
Rearranging or deleting channels
(MENU/123) MENUBroadcastingEdit ChannelChange Number or Delete
You can rearrange the order of channels or delete channels. To change the order of a channel, select it
and then select Change Number. To delete a channel, select it and then select Delete.
Playing Multiple Screens
"
This function is only available on certain models in specific geographical areas.
You can surf the web or run an app while viewing the TV. You can change the size of each screen by
dragging the circle in the middle of the screen to the left or right.
"
The image of the remote control may differ with the TV model.
"
For more information, refer to "Viewing Multiple Screens or Features with Multi-Link Screen".
Connecting an Antenna (Aerial)
Connect the TV to an antenna to receive broadcast signals.
Connect a cable from an antenna to the ANT IN connector, as shown in the image below.
"
An antenna connection is not necessary if you connect a cable box or satellite receiver.
Connecting to the Internet
Establishing a wired Internet connection
Using LAN cables
There are three ways to connect the TV to your Internet access points, as shown in the following
illustrations:
Wall-mounted LAN Outlet
●
LAN
External Modem
●
LAN
① IP Router + ② External Modem
●
LAN
1
"
We recommend using Cat 7 LAN cables to link your TV to the Internet Access Points.
"
The TV will not be able to connect to the Internet if the network speed is below 10Mbps.
2
Connecting to a wired Internet network automatically
(MENU/123) MENUNetworkNetwork Settings
Automatically connect to an available network.
Select Wired.
1.
Once network connection is successful, you will see a confirmation message. If it fails, try again
2.
or connect manually.
Try now
Establishing a wireless Internet connection
Connecting to a wireless internet network automatically
(MENU/123) MENUNetworkNetwork Settings
Make sure that you have the wireless router's SSID (name) and password settings before attempting to
connect.
Select Wireless. The TV automatically displays a list of available wireless networks.
1.
Select a network. If the network you want doesn't appear in the list, select Add Network, and
2.
then enter the network's SSID (name) manually.
If your network is security enabled, enter the password. If your network is not security-enabled,
3.
the TV will bypass the on-screen keyboard and attempt to connect right away.
Connecting to a wireless internet network with WPS
(MENU/123) MENUNetworkNetwork Settings
If the router has a WPS(wi-fi protected setup) push button, you can use it to connect the TV to the
router automatically.
Select Wireless. The TV automatically displays a list of available wireless networks.
1.
Select Stop and then select WPS.
2.
Press the WPS or PBC buttons on your wireless router in less than two minutes.
3.
The TV is connected to the network automatically.
4.
Checking the internet connection status
(MENU/123) MENUNetworkNetwork Status
Network
Network Status
Network Settings
Wi-Fi Direct
Multimedia Device Manager
Screen Mirroring
Device Name Tizen_Device
"
Your TV's menu may differ from the image above, depending on the model.
View the current network and Internet status.
Try now
Changing the name of the TV on a network
(MENU/123) MENUNetworkDevice Name
You can change a name for the TV that will appear on mobile devices and laptop computers.
Select Device Name from the Network menu.
1.
Select a name from the list that appears. Alternatively, select User Input to enter a name manually.
2.
Try now
Connecting to a Network via a Mobile Dongle
You can make the TV to connect to a network via a mobile device by connecting a mobile dongle to
the TV. Connect the mobile dongle to the USB port in the TV.
"
This function is not available on certain models in specific geographical areas.
"
When you use a large mobile dongle(Data Card), USB devices may not work properly due to interferences
among the USB ports, or the wireless network may not work properly due to interferences from the
peripherals and surroundings. In this case, use a USB extension cable.
"
Auto Ticker is not available when you set up mobile network.
"
If you have any problems using online services, please contact your Internet service provider.
The mobile service providers and their devices that support this function are as follows:
Troubleshooting wired Internet connectivity issues
Try now
No network cable found
Make sure that the network cable is plugged in. If it is connected, make sure that the router is turned
on. If it is on, try turning it off and on again.
IP auto setting failed
Do the following or configure the IP Settings manually.
Make sure that the DHCP server is enabled on the router, and reset the router.
1.
If the problem persists, contact your Internet Service Provider.
2.
Unable to connect to the network
Check all IP Settings.
1.
Make sure that the DHCP server is enabled on the router. Then, unplug the router and plug it back
2.
in.
If this does not work, contact your Internet Service Provider.
3.
Connected to a local network, but not to the Internet
Make sure that the Internet LAN cable is connected to the router's external LAN port.
1.
Check the DNS values in IP Settings.
2.
If the problem persists, contact your Internet Service Provider.
3.
Network setup is complete, but unable to connect to the Internet
If the problem persists, contact your Internet Service Provider.
Troubleshooting wireless Internet connectivity issues
Wireless network connection failed
If a selected wireless router is not found, go to Network Settings and select the correct router.
Unable to connect to a wireless router
Check if the router is turned on. If it is, turn it off and on again.
1.
Enter the correct password if required.
2.
IP auto setting failed
Do the following or configure the IP Settings manually.
Make sure that the DHCP server is enabled on the router. Then, unplug the router and plug it back
1.
in.
Enter the correct password if required.
2.
If the problem persists, contact your Internet Service Provider.
3.
Unable to connect to the network
Check all IP Settings.
1.
Enter the correct password if required.
2.
If the problem persists, contact your Internet Service Provider.
3.
Connected to a local network, but not to the Internet
Make sure that the Internet LAN cable is connected to the router's external LAN port.
1.
Check the DNS values in IP Settings.
2.
If the problem persists, contact your Internet Service Provider.
3.
Network setup is complete, but unable to connect to the Internet
If the problem persists, contact your Internet Service Provider.
Connecting Video Devices
Your TV has a variety of connectors for video input from external devices. Below is a list of featured
connectors shown in descending order of picture quality.
HDMI
●
Component
●
Composite (A/V)
●
Connect a video device to the TV with an HDMI connector for the best picture quality. If the device
does not have an HDMI connector, try a component connector.
Connecting with an HDMI cable
The following types of HDMI cables are recommended:
High-Speed HDMI Cable
●
High-Speed HDMI Cable with Ethernet
●
Connect the HDMI cable to the HDMI input connector of the TV and the HDMI output connector of the
device as shown in the image below.
"
Set Edit Device Type to DVI PC for a computer connected with a HDMI-to-DVI cable, and PC for a
computer connected with HDMI cable. Also, set Edit Device Type to DVI Devices for an A/V device with a
HDMI-to-DVI cable.
Connecting with a component cable
Connect the component cable to the component input connectors of the TV and the component output
connectors of the device as shown in the image below.
Make sure the cable colours match the connector colours.
The models without the One Connect Mini
The models with the One Connect Mini
Connecting with a composite (A/V) cable
Connect the AV cable to the AV input connectors of the TV and the AV output connectors of the device
as shown in the image below.
Make sure the cable colours match the connector colours.
The models without the One Connect Mini
The models with the One Connect Mini
Audio Input and Output Connections
Your TV has a variety of connections for audio input from external devices. The connections are listed
below.
HDMI/ARC (Audio Return Channel)
●
Digital Audio (Optical)
●
Audio (Analogue)
●
Connecting with an HDMI (ARC) cable
ARC(Audio Return Channel) lets the TV output digital sound to an audio device and input digital sound
from the same audio device through one HDMI cable. ARC is only available through the HDMI (ARC)
port and only when the TV is connected to an ARC-enabled AV receiver.
Connect an HDMI cable to the HDMI (ARC) input connector of the TV and the HDMI output connector
of the device as shown in the image below.
Loading...
+ 190 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.