Samsung UA40F7500, UA55F8000, UA46F7500, UA55F7500 User Manual

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

HONG KONG (852) 3698 4698 www.samsung.com/hk (Chinese)

Customer Care Centre

Web Site

www.samsung.com/hk_en (English)

LED TV

user manual

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________

[UF7500_8000]BN68-04795D-02L02.indb 1 2013-05-08  5:07:38

BN68-04795D-03

Important Safety Instructions

Warning! Important Safety Instructions

(Please read the appropriate section that corresponds to the marking on your Samsung product before

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

− Do not cover this apparatus in a conﬁned space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

− Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.

− Do not place a water containing vessel(vases etc.) on this apparatus, as this can result in a risk of ﬁre or electric shock.

• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power cord from the outlet before cleaning.

• This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in ﬁre or electric shock.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular

attention to cords at plug end, adaptors and the point where they exit from the appliance.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualiﬁed technician should open this apparatus.

• Make sure to plug the power cord in until it is ﬁrmly inserted. When removing the power cord, make sure to hold the power plug when pulling the

plug from the outlet. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service centre.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).

− Accumulated dust can cause an electric shock, an electric leakage or a ﬁre by causing the power cord to generate sparks and heat or the

insulation to deteriorate.

• Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the aerialport, the train station etc.

Failure to do so may cause serious damage to your set.

• Use only a properly grounded plug and receptacle.

− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

• Do not allow children to hang onto the product.

• Store the accessories (battery, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted ﬂoor or a location exposed to vibration.

• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.

• Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol,

thinners, insecticide, aerial freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product.

• Apparatus shall not be exposed to dripping or splashing.

• Do not dispose of batteries in a ﬁre.

• Do not short circuit, disassemble or overheat the batteries.

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT

ALL TIMES.

attempting to install the product.)

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

English - 2

[UF7500_8000]BN68-04795D-02L02.indb 2 2013-05-08  5:07:39

Contents

English

5 Accessories

6 Assembling the Power Cover

6 Assembling the Holder-Wire stand

Basic Features

7 Assembling the Cover Jack

7 Using the Smart Touch Control

8 Connecting to the TV

8 Reconnecting the Smart Touch Control Unit

8 Low Battery Power Warning

8 Inserting the Batteries (AAA X 2)

9 Using the touchpad

9 Changing Channels by Entering Numbers

9 Adjusting the Touchpad

9 Show Status and Notiﬁcation Banner

10 History

10 Searching

10 Deleting History Data

10 Using the Virtual Remote Control

11 Turning on the TV

11 Built-in TV Camera

12 Extending the TV Camera

12 Retracting the Camera

Network Conﬁguration

17 Connecting to a Network

17 Network Connection - Wireless

18 Network Connection - Wired

3D Basics

19 3D Active Glasses

19 Pairing 3D Active Glasses

21 Watching 3D Video

Troubleshooting and Other Information

22 What is Remote Support?

22 The Evolution Kit Slot (Kit Sold Separately)

23 Troubleshooting

24 Mounting the TV on the Wall Using

the Wall Mount Kit (Optional)

26 Storage and Maintenance

26 Providing Proper Ventilation for Your TV

27 Eco Sensor and Screen Brightness

13 Universal Remote Setup

13 Add the External Device

13 SETUP

14 Change Password

28 Tip Prevention – Securing the TV to

the Wall (For LED 8000 series)

31 Tip Prevention – Securing the TV to

the Wall (For LED 7500 series)

14 Switching Between Video Sources

15 Viewing the e-Manual

15 Scrolling a Page

15 Using the Top Icons

16 Jumping to a Menu Item

16 Updating the e-Manual

[UF7500_8000]BN68-04795D-02L02.indb 3 2013-05-08  5:07:39

Speciﬁcations

32 Speciﬁcations - TV

33 Licences

English - 3

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and speciﬁcations may change without notice.

Features for your new TV

• 3D: This new feature enables you to view 3D content.

• SMART HUB:

This TV features Smart Hub, a multi-purpose entertainment and family centre. With Smart Hub, users can surf the web, download applications, and stay in touch with family and friends through social networking services. In addition, you can enjoy photo, video, and music ﬁles stored on external storage devices.

Press ™ to launch Smart Hub. Choose a service using the icons displayed in the top part of the screen.

Smart Hub services and functionality include:

Social: Watch the latest YouTube videos and you and your friends' video posts on Facebook and

Twitter. You can also make video calls to friends by connecting the TV to a camera.

Apps: Download and install applications such as WebBrowser and Kids.

Photos, Videos & Music: Play back photo, video, and music ﬁles from an external storage device.

• Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices that support

Anynet+ with your Samsung TV’s remote.

• e-Manual: Provides a detailed, on-screen user's manual built into your TV.

• Smart Features: Using this function, you can access and control menu options and functions using

motions and laguages.

• Device Manager: Use the TV features with a USB or Bluetooth keyboard and mouse.

• MHL & Screen Mirroring: Displays mobile device screens on your TV using a wired or wireless

connection.

English - 4

[UF7500_8000]BN68-04795D-02L02.indb 4 2013-05-08  5:07:39

Accessories

Please make sure the following items are included with your TV. If any items are missing, contact your

✎

dealer.

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

✎

Check that there is no accessory hidden behind packing materials when you open the box.

✎

[CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

• Smart Touch Control & Batteries (AAA x 2) • Power Cord

• User Manual • Important Safety Precautions

• Samsung 3D Active Glasses

English

Holder-Wire stand

(for LED 8000 series)

Component Adapter (for LED 8000 series)

IR Extender Cable

Wall mount adapter x 2

(for LED 8000 series)

Power cover

(for LED 8000 series)

Holder-Wire stand

(for LED 7500 series)

WARNING: Screens can be damaged from direct pressure when handled incorrectly. We recommend lifting the TV by the edges, as shown.

AV Adapter (8000 series: 2 EA) (7500 series: 1 EA)

TV-Holder Kit

(for LED 8000 series)

Holder-Ring x 4

(for LED 7500 series)

Don't Touch

This Screen!

English - 5

[UF7500_8000]BN68-04795D-02L02.indb 5 2013-05-08  5:07:40

Assembling the Power Cover

For LED 8000 series

Assembling the Holder-Wire stand

For LED 8000 series

For LED 7500 series

English - 6

[UF7500_8000]BN68-04795D-02L02.indb 6 2013-05-08  5:07:40

Basic Features

Assembling the Cover Jack

For LED 8000 series

Assembling the Jack Cover only when you have no need to use the connectors leftside.

✎

Using the Smart Touch Control

You can use the MIC to give Voice

Recognition commands. Simply press the

Voice Recognition function can be

✎

affected by unclear pronunciation, voice

level, or surrounding noise.

VOICE

button.

Turns on and off the satellite or cable set-top box connected to the TV. For this, the Smart Touch Control must be conﬁgured as a universal remote control.

English

Turns the TV on and off.

Displays and selects the available video

Adjusts the volume.

Cuts off the sound

temporarily. Press

and hold this button

to select Audio

Description and Subtitle.

(Depending on the

country or region.)

The colour buttons work differently,

depending on the function that the TV is

Returns to the previous menu. Press and

hold this button to exit all currently running

Brings up Smart Hub applications. See the

e-Manual chapter, SMART TV Features >

To exit an application that is running,

✎

currently performing.

press the

sources.

applications.

Smart Hub.

™

button.

HISTORY SEARCH

VOICE

: Takes your voice command and

enters a text using your voice.

Changes channels.

Displays a virtual remote control on the screen. See the e-Manual chapter,

Controlling TV > Using the Virtual Remote Control.

Touchpad

• Drags on the Touchpad to move the focus on the screen.

• Presses the Touchpad to run, activates, or selects the highlighted item.

• Presses and holds the touch pad to display the Channel List.

Toggles this button between History and Search.

Displays the EPG (Electronic Programme Guide).

English - 7

[UF7500_8000]BN68-04795D-02L02.indb 7 2013-05-08  5:07:42

Connecting to the TV

In order to operate the TV using a Smart Touch Control unit, you must ﬁ rst pair it to the TV via Bluetooth.

1. When the TV is off, point the Smart Touch Control at the remote control receiver of the TV and press

the TV button for the ﬁ rst pairing. Only this buttons sends an IR signal. The remote control receiver's location may vary depending on the model.

2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt

to connect to the Smart Touch Control unit automatically.

Reconnecting the Smart Touch Control Unit

If you need to reestablish the connection between the TV and the Smart Touch Control unit, press the PAIRING button at the back of the Smart Touch Control unit. The PAIRING button can be accessed by removing the control unit's battery cover. Pressing the PAIRING button automatically reestablishes the connection between the control unit and the TV.

Low Battery Power Warning

When the Smart Touch Control’s battery power is low, the indicator shown (in the illustration) below appears on the bottom left of the TV screen. Replace the old batteries with new alkaline ones.

Inserting the Batteries (AAA X 2)

1. Slightly lift the battery cover by pulling the strap or using a plastic card (e.g. a credit card or a

transportation card). Next, pull on the cover’s notch with a ﬁ ngernail to remove the cover completely.

2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.

3. Align the battery cover with the back of the remote control and press down along the edges until it is

cleanly attached to the remote control.

The Smart Touch Control's shape may vary depending on the model.

✎

English - 8

[UF7500_8000]BN68-04795D-02L02.indb 8 2013-05-08  5:07:42

Using the touchpad

HISTORY SEARCH

Use the touchpad to perform various commands. Navigate to Tutorial (System > Device Manager > Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.

Dragging Press

English

Drag on the touchpad in the desired direction. Move the focus or the

pointer in the direction the ﬁnger is dragging.

Press on the touchpad. This selects the focused item. When watching

TV, pressing and holding the touchpad displays the channel list. On some

apps, pressing and holding the touchpad for over 2 seconds displays a

list of functions available for the app.

Changing Channels by Entering Numbers

While watching TV, tap on the protruding line on the left or right edge of the touchpad to bring up the numerical input window on the screen. Use your ﬁnger to enter the number for the channel you want to watch. The recognised number is displayed on the screen and the TV switches to the corresponding channel. However, the number you have entered may not be recognised properly by the TV. Refer to the guide below to ensure that your numerical entries are recognised accurately.

Numerical Input Guide

Refer to the diagrams below when entering numerical values. The TV may not recognise your entries if you do not follow the sequences shown below.

Adjusting the Touchpad

Users can adjust the sensitivity of the Smart Touch Control’s touchpad. Set Touch Sensitivity to adjust sensitivity and make it more convenient to use.

Show Status and Notiﬁcation Banner

Press the MORE button on the Smart Touch Control and then select STATUS on the virtual control panel that appears on the screen. The status and notiﬁcation banner is shown at the top of the screen.

English - 9

[UF7500_8000]BN68-04795D-02L02.indb 9 2013-05-08  5:07:43

History

Tap on HISTORY/SEARCH and then select History from the list displayed at the bottom of the screen. This displays an interactive list of recently accessed channels, media content and applications.

Searching

Press the HISTORY/SEARCH button. The list appears at the bottom of the screen. Press the HISTORY/

SEARCH button again. Enter search criteria to search not only many apps and their contents on the TV

but also the Web.

Deleting History Data

You can delete the history information about recently viewed channels, content and applications.

Using the Virtual Remote Control

Press MORE button to display the virtual remote panel on the screen. The virtual remote panel consists of a number panel, a playback control panel, and a quick access panel. Use the touchpad to select numbers and buttons. Press and hold the MORE button. A quick access panel of virtual remote panel appears. You can select screen buttons easily.

Changing the Virtual Remote Control Panel

Choose the number panel, playback control panel, or quick access panel as the panel to be shown on the screen.

Use the touchpad to keep moving the focus left or right. The panel changes when the focus is moved beyond the leftmost or rightmost edge.

Use left/right scroll function on the touchpad to change the panel easily.

Using the Number Panel

Use the number panel to enter numbers on a keypad screen or webpage to change the channel while watching TV. Changing the channel using the number pad leaves a record, allowing you to easily return to previous channels.

Using the Playback Control Panel

Use the playback control panel to pause, rewind, fast forward, skip to the next ﬁle, and much more while enjoying media content.

Using the Quick Access Panel

Quickly access the INFO, MENU and e-Manual buttons. However, the availability of buttons may vary depending on the operating mode of the Smart Touch Control unit (with the TV only, as a universal remote, etc.).

Adjusting the virtual remote control

Screen Menu > System > Device Manager > Smart Touch Control Settings > Onscreen Remote Size

You can resize the virtual remote control. If the virtual remote control buttons are too small, enlarge the remote control window before using the virtual remote control.

English - 10

[UF7500_8000]BN68-04795D-02L02.indb 10 2013-05-08  5:07:43

Turning on the TV

Turn on the TV using the P button on the remote control or TV panel.

The product colour and shape may vary depending on the model.

✎

The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV

✎

without the remote control.

English

(built-in microphone)

Camera



Built-in TV Camera

Function menu

The image is drawn by facing

Remote control sensor

When you use the Smart Touch Control, a standby LED does not work (except

TV Controller

the front side of the TV.

button).

This TV features a built-in TV camera that can be used for the Motion Control, Voice Recognition (built-in microphone), and Face Recognition features. You can also use the knob for camera's angle adjustment to change the camera's viewing angle.

From the Top From Behind

Microphone

Lens

Knob for camera's angle adjustment

Microphone

English - 11

[UF7500_8000]BN68-04795D-02L02.indb 11 2013-05-08  5:07:44

Extending the TV Camera

주의

In order to use the TV camera, you must ﬁrst extend it.

Gently push the camera in without touching the lens until you hear a click.

Retracting the Camera

If you are not using the TV camera, keep it retracted inside the TV. The Motion Control and Face Recognition features cannot be used while the TV camera is in the retracted state, but Voice Recognition will still be available.

Gently push the camera in without touching the lens until you hear a click.

Do not touch the lens while operating the TV camera. Leave ﬁngerprints that may affect the image quality. If the lens gets dirty, clean it using a soft piece of cloth.

Keep the microphone from being clogged by dirt or dust. If it is clogged, voice commands may not be recognized. Use a soft cloth to wipe the microphone.

English - 12

[UF7500_8000]BN68-04795D-02L02.indb 12 2013-05-08  5:07:46

Universal Remote Setup

This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home theatres, and other third-party external devices connected to the TV using the TV's remote control.

5cm

Keep a distance of 5 cm at least between the IR EXTENDER CABLE and the external device, as the illustration shows. Face the IR EXTENDER CABLE toward the external device’s remote control signal receiver. Note that it should be no obstacle between IR Extender and external device. The presence of an obstacle will interfere with the transmission of the remote control signal.

Some external devices may not be recognized, depending on the brand and model.

✎

English

Add the External Device

1. Turn on the external device you wish to set up universal remote function for and then press SOURCE to bring up the Source screen.

2. Select Universal remote setup from the top of the screen. This initiates the universal remote setup

process.

3. Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the remote control by entering the model number manually.

SETUP

The initial setup dialog appears when the TV is ﬁrst activated.

Follow the on-screen instructions to ﬁnish the initial setup process, including menu language choice, channel scan, network connection, and more.

At each step, either make a choice or skip the step.

Users can manually perform this process at a later time under the System > Setup menu.

English - 13

[UF7500_8000]BN68-04795D-02L02.indb 13 2013-05-08  5:07:47

Change Password

Screen Menu > System > Change PIN

Change the TV's password.

1. Run Change PIN and then enter the current password in the password ﬁeld. The default password is "0-0-0-0".

2. Enter a new password and then enter it again to conﬁrm it. The password change is complete.

If you forget the PIN code, press the buttons in the following sequence which resets the PIN to “0-0-

✎

0- 0”:

For Smart Touch Control: When the TV turnes on: MUTE → Volume up → RETURN → Volume down → RETURN → Volume up → RETURN

Switching Between Video Sources

Press SOURCE button to switch between devices connected to the TV.

For example, to switch to a game console connected to the second HDMI connector, press SOURCE button. From the Source list, select HDMI2/DVI. The connector names may vary depending on the product. Select Tools button at the upper-right corner of the screen to access the following functions.

• Refresh

Select this if a connected device does not appear in the list. If the list does not show the device after selecting Refresh, check the status of the TV-to-device connection.

• Edit Name

You can rename devices connected to the TV to more easily identify external sources.

With a computer connected to the TV's HDMI (DVI) port via an HDMI cable, for example, you can change Edit Name to PC.

With a computer connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example, you can change Edit Name to DVI PC.

With an AV device connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example, you can change Edit Name to DVI Devices.

• Information

View detailed information about the connected devices.

• Disconnect USB Device

Remove the USB device from the list safely. This function is only available when the USB device selected.

Universal remote setup

To add a new external device to control it with the Touch Remote Control, press the SOURCE button and select Universal remote setup on the top right of the screen.

Using the universal remote control, users can control external devices connected to the TV, such as a settop box, Blu-ray player, and AV receiver.

English - 14

[UF7500_8000]BN68-04795D-02L02.indb 14 2013-05-08  5:07:47

Viewing the e-Manual

The embedded e-Manual contains information about your TV's key features.

This TV has a built-in user guide. To read it, use one of the following methods:

• Open the Support menu and choose e-Manual(Troubleshooting).

• Press the MORE button on the Smart Touch Control to display control buttons on the screen. Flick the Touchpad until e-Manual appears and select it.

Words in blue refer to screen menu options and words in light blue refer to remote control buttons.

✎

A printable version of this guide is also available at www.samsung.com/support.

✎

Scrolling a Page

To scroll a page, use of one of the following methods:

English

• Press the

• Drag or ﬂick up or down from either edge of the touchpad.

• Place the focus on the touchpad.

or button on the scroll bar at the right edge of the screen.

or button at the right edge of the screen, drag or ﬂick up or down on the

Using the Top Icons

Use the Back, Forward and Opened pages icons on the top left of the screen to navigate through pages. These icons are available when two or more pages are passed.

Returning to the Home Page

To return to the home page, press the a button or select on the top right of the screen.

English - 15

[UF7500_8000]BN68-04795D-02L02.indb 15 2013-05-08  5:07:47

Searching the Index

Press the b button or select on the top right of the screen to display the index. Select a term to display the page containing the term.

Searching Pages

Press the { button or select on the top of the screen to access the search screen. Enter a search phrase and select Done. Select an item from the search results list to navigate to the relevant page.

Closing the e-Manual

To close the e-Manual, press hold the RETURN button or select at the upper-right corner of the screen.

Jumping to a Menu Item

To directly jump to the menu item that is described in the current section, select . It is possible to jump from a menu item directly to the related section in the e-Manual. On the screen menu, press the

MORE button on the Smart Touch Control and then select e-Manual on the virtual control panel that

appears on the screen.

This feature may not be available, depending on the menu.

✎

Updating the e-Manual

Open the Smart Hub and select Apps, and then select More Apps. The e-manual can be updated in the same way with an application update.

On the More Apps screen, select Options. Select Auto Update Apps and set it to on.

English - 16

[UF7500_8000]BN68-04795D-02L02.indb 16 2013-05-08  5:07:48

Connecting to a Network

Connecting the Smart TV to a network gives you access to online services such as the Smart Hub, as well as software updates.

Network Connection - Wireless

Connect the TV to the Internet using a standard router or modem.

Wireless IP Router or Modem

that has a DHCP Server

The LAN Port on the Wall

LAN Cable (Not Supplied)

Wireless Network Precautions

• This Smart TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using IEEE 802.11n. Otherwise when you play video over a network connection, the video may not play smoothly.

English

• To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.

• Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is currently being used by another device, the result is usually interference and/or a communications failure.

• Most wireless networks have an optional security system. To enable a wireless network's security system, you need to create a security key using characters and numbers. This security key is then needed to connect to the wireless network.

Network Security Protocols

The TV only supports the following wireless network security protocols and is unable to connect to noncertiﬁed wireless routers:

• Authentication Modes: WEP, WPAPSK, WPA2PSK

• Encryption Types: WEP, TKIP, AES

If the wireless router has been set to Pure High-throughput (Greenﬁeld) 802.11n mode and the Encryption Type to WEP or TKIP, Samsung Smart TVs will not support the connection in compliance with the new WiFi certiﬁcation speciﬁcations.

If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network using PBC (Push Button Conﬁguration) or a PIN (Personal Identiﬁcation Number). WPS automatically conﬁgures the SSID and WPA key settings.

English - 17

[UF7500_8000]BN68-04795D-02L02.indb 17 2013-05-08  5:07:48

Network Connection - Wired

There are three main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated starting below:

TV Rear Panel

The Modem Port on the Wall

Modem Cable (Not Supplied) LAN Cable (Not Supplied)

The Modem Port on the Wall

External Modem

(ADSL / VDSL / Cable TV)

External Modem

(ADSL / VDSL / Cable TV)

TV Rear Panel

IP Router that has a

DHCP Server

Modem Cable (Not Supplied)

The LAN Port on the Wall

The TV does not support network speeds less than or equal to 10Mbps.

✎

Use Cat 7 cable for the connection.

✎

LAN Cable

(Not Supplied)

LAN Cable (Not Supplied)

LAN Cable

(Not Supplied)

TV Rear Panel

English - 18

[UF7500_8000]BN68-04795D-02L02.indb 18 2013-05-08  5:07:49

3D Basics

3D Active Glasses

Features

Samsung's SSG-5100GB 3D glasses enable you to view 3D images on your 3D TV. The Samsung 3D glasses communicate with Samsung 3D TVs via the 2.4GHz RF band.

The Samsung 3D glasses are only compatible with Samsung D, E, and F series 3D TV's that are

✎

released 2011, 2012 and 2013. These 3D glasses cannot be connected to other Bluetooth devices.

Parts

For details on how to attach the glasses' temples and how

✎

to pair the glasses with the TV, refer to the separate 3D glasses manual.

Replacing the Battery

If the red LED blinks every two seconds continually, replace the battery with a new one.

Insert the "+" side of the battery into the side marked with "+" in the battery compartment.

✎

To check the remaining battery capacity, refer to the pairing section in this manual.

✎

LED Indicator & Power Button

Battery Cover

Liquid crystal shutter

English

Pull the battery cover

downward

Open the battery cover Remove the battery Replace the battery Push the battery cover

downward

Close the battery cover

Pairing 3D Active Glasses

What is Pairing? Pairing is the process of connecting 3D glasses and a 3D TV so that the two devices

✎

can exchange data.

Ensure your Samsung TV and 3D glasses are no farther than 19.5 in (50 cm) apart from each other

✎

while pairing is in progress.

• Turning the glasses on

Press the power button brieﬂy. The green LED is turned on for 3 seconds. (Make sure that 3D is activated on the TV before using the 3D glasses.)

• Turning the glasses off

Press the power button brieﬂy. The red LED is turned on for 3 seconds.

• Performing the pairing process

Turn the TV on and let it power up completely. Press and hold the Power button on the glasses. The green and the red LEDs blink alternately for 2 seconds.

English - 19

[UF7500_8000]BN68-04795D-02L02.indb 19 2013-05-08  5:07:49

• Operating range

2~6m

50cm

Recommended viewing distance 2 ~ 6 m (6.5 to 19.5 ft)

Recommended pairing distance 50 cm or less (19.5 in)

Once the 3D glasses are paired, the remaining battery capacity is displayed on the TV screen. (This

✎

Recommended pairing distance

Recommended viewing distance

feature only applies to Samsung F series 3D TVs and 3D glasses that have been available since 2013.)

If you keep trying to pair the glasses and the TV, the battery level will decrease significantly. However,

✎

the battery level will recover to a certain degree in about a minute.

The working distance depends on the existence of obstacles (a person, metal, walls, etc.) between

✎

the glasses and the TV and the strength of the Bluetooth signal.

Turn off the 3D glasses while they are not in use. If you leave the 3D glasses on, the battery lifespan

✎

decreases.

Pairing steps

1. Turn on the TV, and then move the glasses within 19.5 inches of the TV.

2. Press and hold the Power button on the glasses. The 3D glasses will power on and pairing will start.

3. The message “3D glasses are connected.” will be displayed on the TV screen when the pairing is

successfully completed.

• If pairing fails, the 3D glasses will power off.

• If the ﬁrst attempt to pair fails, power the TV off and on again and perform step 2.

• How to pair again: Press the power button on the 3D glasses for more than 1 second.

Pairing is needed again in the following situations:

• If the 3D glasses do not function, even when the power button is pressed, especially with a 3D TV after a repair.

• If you want to play 3D content on another Samsung 3D TV model that belongs to the D, E, or F series released in 2011 through 2013. You must pair the glasses with the other TV.

English - 20

[UF7500_8000]BN68-04795D-02L02.indb 20 2013-05-08  5:07:50

+ 45 hidden pages

Samsung UA40F7500, UA55F8000, UA46F7500, UA55F7500 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual