Samsung UA46F7100AM, UA50F6800AM, UA60F6400AM, UA32F6300AM, UA40F6700AM User Manual

...

E-MANUAL

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model______________ Serial No.______________

Contents

e-Manual Guide

Viewing the e-Manual

1 Scrolling a Page

1 Using the Top Icons

1 Returning to the Home Page

2 Searching the Index

2 Searching Pages

2 Closing the e-Manual

2 Jumping to a Menu Item

2 Updating the e-Manual

Getting Started

Aerial Connection

Video Device Connections

4 HDMI Connection

5 Component Connection

6 AV Connection

Favourite Channels

18 Add Channels

19 Remove Channels

19 Rearrange the Favourites Channels List

19 Rename a Favourites Channel List

Network Configuration

20 Wired Network

21 Dynamic versus Static IP Addresses

22 Wireless Network

23 Wireless Network Precautions

23 Network Security Protocols

Wired Network Setup

24 Automatic Wired Network Setup

25 Manual Wired Network Setup

27 Failed Wired Connection

Wireless Network Setup

28 Automatic Wireless Network Setup

29 Manual Wireless Network Setup

31 Using the WPS Button

Audio Device Connections

7 Digital Audio (Optical) Connection

8 Audio Output Connection

8 ARC (Audio Return Channel)

Computer Connection

9 HDMI Connection

9 HDMI-to-DVI Connection

Switching Between Video Sources

Programming

11 Auto Tuning

Channel Settings

12 Country (or Area)

12 Manual Tuning

14 Transfer Channel List

15 Channel Management

16 Remove Channels

31 Failed Wireless Connection

Checking the Network Status

Mobile Device Connection

34 Wi-Fi Direct

35 AllShare Settings

35 Rename the TV

16 Edit Channel Number

17 Programme Rating Lock

17 Channel Lock

17 Channel Unlock

17 Rename Analogue Channels

Controlling the TV

Using the Smart Touch Control

36 Inserting the Batteries (AAA X 2)

37 Connecting to the TV

38 Reconnecting the Smart Touch Control

38 Battery Low Alarm

39 Buttons and Descriptions

41 Special Functions

Using the touchpad

42 Dragging

42 Press

43 Flicking

43 Pressing and Holding

44 Pressing and Dragging

44 Scrolling Left/Right

45 Scrolling Up/Down

45 Changing Channels by Entering Numbers

46 Numerical Input Guide

46 Adjusting the Touchpad

46 Show Status and Notification Banner

46 Recommendations

47 History

47 Deleting History Data

47 Searching

SMART Interaction

54 Precautions

54 Face Recognition

55 TV Camera Use

55 Motion Control

55 Voice Recognition

Voice Recognition

57 Operating Environment

57 Voice Recognition Tutorial

58 Enabling Voice Recognition

58 Basic Voice Recognition Use

59 Voice Recognition Settings

60 Interactive Voice Recognition Commands

60 Deactivating Voice Recognition

Motion Control

61 Operating Environment

62 Motion Control Environment Test

62 Motion Control Tutorial

63 Motion Control Activation

63 Using the Basic Motion Controls

64 Motion Control Options

65 Motion Control Screen

65 The Screen Composition while Viewing TV

66 The Smart Hub Screen Composition

Face Recognition

68 Operating Environment

Using the Virtual Remote Control

48 Changing the Virtual Remote Control Panel

48 Change a position of the Virtual Remote Panel

48 Using the Number Panel

49 Using the Playback Control Panel

49 Using the Quick Access Panel

49 Adjusting the virtual remote control

Universal Remote Setup

50 Connecting the IR EXTENDER CABLE

52 Add the External Device

52 Using the Universal Remote Control

52 Registered External Device Management

Entering Text using the Onscreen Keypad

53 Entering Text using the QWERTY Keypad

53 Additional Features

69 Face Registration

69 Face Recognition Login

Using Peripheral Devices

71 Keyboard Connection

71 Keyboard Use

72 Mouse Connection

72 Mouse Use

TV Viewing

Timeshift

90 Precautions

TV Viewing

73 Programme Info

74 Guide

74 Change Channels

74 Recording the Current Programme

74 Change Category

74 Quick Navigation

75 Schedule Viewing

75 Schedule Recording

75 Checking the Programme Info

76 Channel List

76 Change Channels

76 Sorting

76 Genre

76 Change the Channel List

Schedule Viewing

78 Digital Channel Schedule Viewing

78 Guide

78 Programme Info

79 Analogue Channel Schedule Viewing

79 Cancel a Schedule Viewing

79 Edit Schedule List

Schedule Recording

81 Precautions

91 Activating the Timeshift function

3D TV

92 Precautions

93 Tips

93 Activating 3D Mode

94 Setting 3D Effects

PIP

Analogue Screen Calibration

96 Fine Tune

Broadcast Audio Options

97 Audio Language

97 Audio Format

97 Audio Description

Subtitles

98 Show Subtitles

99 Subtitle Options

Changing the Teletext Language

Digital Text

83 Dedicated Recording Device Setup

83 Plug & Play

83 Dedicated Recording Device Management

84 Programme Recording

84 Instant Recording

84 Guide

85 Programme Info

85 Specified Time and Date

85 Cancel the Schedule Recording function

85 Edit Timer List

Recorded Programme Playback

86 Changing the Viewing Mode

86 Filtered View

86 Playlist Creation

87 Recording Lock / Unlock

87 Deleting Saved Programmes

87 Rename

88 Device Management

88 Playing a Different Programme

TV Settings

Basic Picture Settings

100 Changing the Picture Mode

102 Picture Quality

103 Applying the Current Picture Quality Setting to Another

Input

104 Picture Size

105 Screen Position

105 4:3 Screen Size

105 Sports Mode

106 Picture Off

106 Reset Image Settings

Advanced Settings

Picture Options

88 Programme Scan

89 Additional Recorded Programme Playback Settings

Basic Sound Settings

112 Changing the Sound Mode

SMART TV Features

113 Adjusting the Sound Settings

114 Auto Volume

114 3D Audio

114 TV Installation Type

114 Resetting the Sound

Speaker Settings

115 Speaker Select

116 Samsung Audio Device Connection

116 Additional Settings

116 DTV Audio Level

117 Digital Audio Out

117 Dolby Digital Comp

Clock and Timer

118 Setting the Time

118 Auto

119 Time Offset

119 Manual

120 Sleep Timer

120 On Timer

121 Off Timer

Screen Protection and Maintenance

122 Eco Solution

123 Screen Burn Protection

123 Pixel Shift

123 Auto Protection Time

124 Scrolling

124 Side Grey

124 Auto Protection Time

Password

125 Change Password

Additional Features

126 Changing the Menu Language

127 Game Mode

127 Precautions and Restrictions

128 BD Wise

128 Menu Transparency

128 Sound Feedback

128 Panel Locking

129 Booting Logo

129 Flash Adjustment

129 DivX® Video On Demand

Smart Hub

130 Agreements Required to Use Smart Hub

131 Samsung Account

131 Creating a Samsung Account

132 Terms & Conditions, Privacy policy

132 Logging In

132 Linking a Samsung Account to Other Accounts

133 Managing Accounts

133 Resetting Smart Hub

133 Searching

133 Keyword Search

133 Setting Search Scope

Status and Notification

134 Show Status and Notification Banner

134 Voice Recognition & Motion Control Configuration

134 Samsung Account Configuration

134 Network Configuration

134 Notifications

Social

135 Social Settings

135 Checking the Application

135 Connecting a Service to a Samsung Account

136 Watching Videos

136 Friend Profile

136 Select a friend to call

136 Filters

Apps

137 Precautions

138 Installing Standard Applications

138 Launching an Application

139 Samsung Apps

139 Searching for Apps

139 Installing Applications

140 Apps Management

140 Edit My Apps

141 Deleting Applications

141 Managing Application Folders

141 Application Lock/Unlock

141 Application Update

142 Fitness

142 Creating a Profile

142 Kids

143 Web Browser

143 Social Networks

143 Linking Service Accounts

143 3D Explorer

144 Apply Picture Mode

144 Auto Ticker

144 Push Notification Settings

144 Channel-Bound Apps

144 Properties

On TV

145 On TV Settings

145 On TV Setup

145 Recommendation notice

146 Recommendation method

146 Adult Contents Block

146 Starting Smart Hub

146 Watching an On-Aerial Recommended programme

146 Scheduled Recommended Programme Info

147 Activating the Guide

147 Programme Recommendations by Time

147 Watching Recorded Programmes

Photos, Videos & Music

148 Restrictions

150 Supported File Formats

150 USB Device Connection

151 USB Device Removal

151 Playing all the Content on a Storage Device

151 Watching Recorded Programmes

Photo Playback

159 Changing the view mode

159 Slideshow

159 Slideshow Settings

160 Playlist Creation

160 Opening a Different File

160 Background Music

160 Mini Player

161 Additional Photo Playback Settings

Anynet+ (HDMI-CEC)

162 Precautions

163 Anynet+ (HDMI-CEC) Setup

163 Anynet+ (HDMI-CEC) Use

163 Switching between Anynet+ Devices

164 Anynet+ (HDMI-CEC) Device Menu

165 ARC

Mirroring Mobile Device Screens on the TV

165 Screen Mirroring

165 Mobile Device Connection

Other Information

151 Clearing the Photos, Videos & Music Screen

152 Using Networked External Storage Devices

153 Allowing DLNA Device Connections

153 AllShare

153 Exporting Contents

Video Playback

154 Changing the view mode

154 Playlist Creation

154 Opening a Different File

155 Video Scanning

155 Show Subtitles

156 Additional Video Playback Settings

Music Playback

157 Changing the view mode

157 Playlist Creation

157 Music Scanning

158 Opening a Different File

Support

166 Remote Management

166 What is Remote Support?

167 How Does it Work?

168 e-Manual

168 Self Diagnosis

168 Picture Test

169 Sound Test

169 Motion Control Environment Check

169 Signal Information

169 Reset

170 Updating the Software

170 Update now

170 Manual Update

170 Auto update

171 Usage Mode

171 Support Info

Teletext Feature

Anti-theft Kensington Lock

158 Additional Music Playback Settings

Display Resolution

174 LED 5300 series and above, PDP 5500 series

174 IBM

174 MAC

175 VESA DMT

176 LED 4500 series

176 IBM

176 MAC

176 VESA DMT

Troubleshooting

Screen

Sound

3D TV

Aerial (Air / Cable) Connection

Picture Size and Input Signal

Supported 3D Resolutions

178 HDMI

178 3D Format: L/R, T/B

178 3D Format: Frame Packing

178 Component

178 Digital Channel

179 Videos/Photos

179 Computer via HDMI

Subtitle and Media Contents file formats, and Codec

179 Subtitle

179 External

179 Internal

180 Supported image resolutions

180 Supported music file formats

181 Video Codec

182 Other Restrictions

182 Video Decoders

182 Audio Decoders

Computer Connection

Networking

Miscellaneous

Schedule Recording / Timeshift

Anynet+ (HDMI-CEC)

Photos, Videos & Music

Apps

Web Browser

3D Precautions

183 CAUTION

184 SAFETY PRECAUTIONS

WARRANTY

185 PROCEDURE FOR MAKING A WARRANTY CLAIM

186 WARRANTY CONDITIONS

Licence

Viewing the e-Manual

The embedded e-manual contains information about your TV's key features.

Navigate to the screen menu and select e-Manual (Support > e-Manual).

Select a category from the left side of the screen.

Select an item. The e-Manual will open on the page containing the selected information.

Words in blue refer to screen menu options and words in light blue refer to remote control buttons.

Arrows are used to indicate the menu path. (Example: Screen Menu > Support > e-Manual)

Scrolling a Page

To scroll a page, use of one of the following methods:

Press the or button on the scroll bar at the right edge of the screen.

●

Place the focus on the or button at the right edge of the screen, press the up or down

●

arrow button on the remote.

For LED 6400 - 6800, PDP 5500 Series

Press the or button on the scroll bar at the right edge of the screen.

●

Drag or flick up or down the line on either the left or right edge of the touchpad.

●

Place the focus on the or button at the right edge of the screen, drag or flick up or down

●

on the touchpad.

Using the Top Icons

Use the Back, Forward, and Opened pages icons on the top left of the screen to navigate through pages. These icons are available when two or more pages are passed.

Returning to the Home Page

To return to the home page, press the a button or select on the top right of the screen.

Searching the Index

Press the b button or select on the top right of the screen to display the index. Select a term to display the page containing the term.

Searching Pages

Press the { button or select on the top of the screen to access the search screen. Enter a search phrase and select Done. Select an item from the search results list to navigate to the relevant page.

Closing the e-Manual

To close the e-Manual, press hold the RETURN button or select at the upper-right corner of the screen.

Jumping to a Menu Item

To directly jump to the menu item that is described in the current section, select to jump from a menu item directly to the related section in the e-Manual.

On the screen menu, press the E-MANUAL button that appears on the screen.

For LED 6400 - 6800, PDP 5500 Series

On the screen menu, press the MORE button on the Smart Touch Control and then select e-Manual on the virtual control panel that appears on the screen.

This feature may not be available, depending on the menu.

Try Now

. It is possible

Updating the e-Manual

Open the Smart Hub and navigate to Apps screen, and then select More Apps. The e-manual can be updated in the same way with an application update.

On the More Apps screen, select Apps to update. Select e-Manual from the list. The e-Manual starts updating to the latest version. However, Apps to update appears on the screen only when the update is required.

Aerial Connection

Refer to the diagram and connect the aerial cable to the aerial input connector. Make sure that you do not bend the cable. The number of connectors and their names and locations may vary depending on the model.

Connect the correct aerial cable for your viewing environment (over-the-air or cable broadcasting). However, an aerial connection is not necessary if you are using a cable box or satellite receiver.

Video Device Connections

This TV has a wide range of connectors for video input from video devices such as Blu-ray players, DVD players, camcorders and gaming consoles. Below is a list of featured connectors shown in descending order of picture quality.

HDMI

●

Component

●

Connect the video device to the TV via an HDMI connector for the best picture quality. If the device does not have an HDMI connector, try a component connector to get the next best possible picture quality.

The number of connectors and their names and locations may vary depending on the model. When connecting an external device, refer to the device's operating manual. The number of external device connectors and their names and locations may vary depending on the manufacturer.

HDMI Connection

Refer to the diagram and connect the HDMI cable to the video device's HDMI output connector and the TV's HDMI input connector. One of the following HDMI cable types is recommended:

High-Speed HDMI Cable

●

High-Speed HDMI Cable with Ethernet

●

Use an HDMI cable with a thickness of 14 mm or less. Using a non-certified HDMI cable may result in a blank screen or a connection error.

Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications.

This TV does not support HDMI Ethernet Channel. Ethernet is a LAN (Local Area Network) built on coaxial cables standardized by the IEEE.

Component Connection

Refer to the diagram and connect the AV cable to the TV's component input connectors and the device's component output connectors. Make sure the cable colours match the connector colours.

AV Connection

Refer to the diagram and connect the AV cable to the TV's external input connectors and the device's AV output connectors.

If you are using the TV's external input connectors, connect the video cable to the Y connector. Some models feature a video connector as well. In this case, connect the cable to the video connector.

Audio Device Connections

This TV has a wide range of connectors for audio input from devices such as amplifiers, Blu-ray players and DVD players. For better audio quality, it is a good idea to use an AV receiver.

Digital Audio (Optical)

●

Audio

●

ARC (Audio Return Channel)

●

Digital Audio (Optical) Connection

Refer to the diagram and connect the optical cable to the TV's digital audio output connector and the device's digital audio input connector.

Connecting the device using an optical cable does not automatically turn off the TV speakers. To turn off the TV speakers, open the Speaker Select (Sound > Speaker Settings > Speaker Select) menu, then set External Speaker.

Adjust the audio device's volume using its remote control.

An unusual noise coming from the audio device while it is being used may indicate a problem with the audio device itself. If this is the case, ask for assistance from the audio device manufacturer.

5.1-channel audio for digital channels is only available with broadcasts that support 5.1-channel audio.

Audio Output Connection

Refer to the diagram and connect the audio cable to the TV's audio output connector and the device's audio input connector. AUDIO OUT is supported in LED TV.

ARC (Audio Return Channel)

This connection is available only with PDP 5500 series and LED 6300 series or higher.

This TV supports 3D and ARC (Audio Return Channel) functions via an HDMI cable. ARC enables digital sound to be output using just an HDMI cable. However, ARC is only available through the HDMI (ARC) port and only when the TV is connected to an ARC-enabled AV receiver. Connect the HDMI cable to the TV's HDMI (ARC) connector and the device's HDMI output connector.

Computer Connection

This SMART TV has the following computer connection ports:

HDMI

●

HDMI-to-DVI

●

For the highest picture quality, connect the computer to the HDMI/DVI port. Not all computers are HDMI-enabled. In this case, use an HDMI-to-DVI cable to connect the computer to the TV. Refer to the "Display Resolution" for information on the resolution settings supported to the TV.

HDMI Connection

Refer to the diagram and connect the HDMI cable to the TV's HDMI input port and the computer's HDMI output port.

HDMI-to-DVI Connection

Refer to the diagram and connect the HDMI-to-DVI cable to the TV's HDMI (DVI) port and the computer's DVI output port. The HDMI-to-DVI connection is available through the HDMI (DVI) port only.

DVI cannot carry audio. To listen to the computer sound, connect the external speaker to the computer’s audio output connector.

Switching Between Video Sources

Press SOURCE button to switch between devices connected to the TV.

For example, to switch to a game console connected to the second HDMI connector, press SOURCE button. From the Source list, select HDMI2. The connector names may vary depending on the product.

Select Tools button from the Source screen to access the following options:

Information

●

View detailed information about the connected devices.

Edit Name

●

You can rename devices connected to the TV to more easily identify external sources.

With a computer connected to the TV's HDMI (DVI) port via an HDMI cable, for example, you can change Edit Name to PC.

With a computer connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example, you can change Edit Name to DVI PC.

With an AV device connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example, you can change Edit Name to DVI Devices.

Refresh

●

Select this if a connected device does not appear in the list. If the list does not show the device after selecting Refresh, check the status of the TV-to-device connection. Refresh only available when Anynet+ function is turn On.

Disconnect USB Device

●

Remove the USB device from the list safely. This function is only available when the USB device selected.

Universal remote setup

●

(Depending on the country)

To add a new external device to control it with the Touch Remote Control, press the SOURCE button and select Universal remote setup on the top right of the screen. Using the universal remote control, users can control external devices connected to the TV, such as a set-top box, Blu-ray player, and AV receiver. For details, see "Universal Remote Setup".

Programming

Scan and index available channels.

You can also remove channels from the index, and designate favourites channels for a more convenient TV viewing experience. Programming is not necessary if you are connected to a cable or satellite receiver.

Auto Tuning

Screen Menu > Broadcasting > Auto Tuning

Try Now

Broadcasting

Auto Tuning

Channel List

Guide

Schedule Manager

Edit Channel

Edit Favourites

Channel Settings

The displayed image may differ depending on the model.

Automatically scans and indexes all channels received through the TV's aerial input connector.

To start, navigate to Broadcasting and select Auto Tuning.

Select Start when prompted with a message. This initiates the Auto Tuning function. The process

can take up to 30 minutes to complete. If starting the Auto Tuning function when there is an existing index of channels overwrites the previous index.

Auto Tuning

●

Scans for channels automatically and stores them in the TV’s memory.

Digital & Analogue / Digital / Analogue: Select the channel source to memorise.

–

Channel Settings

Screen Menu > Broadcasting > Channel Settings

Try Now

Broadcasting

Auto Tuning

Channel List

Guide

Schedule Manager

Edit Channel

Edit Favourites

Channel Settings

The displayed image may differ depending on the model.

Country (or Area)

Screen Menu > Broadcasting > Channel Settings > Country (or Area)

(Depending on the country)

Select your country (or area) so that the TV can correctly auto-tune the broadcasting channels.

The PIN input screen appears. Enter your 4 digit PIN number.

Manual Tuning

Screen Menu > Broadcasting > Channel Settings > Manual Tuning

Scans for a channel manually and stores in the TV.

If a channel is locked using the Channel Lock function, the PIN input window appears.

This function may not be supported depending on the region.

Try Now

Digital Channel Tuning

●

Scans for a digital channel.

Select the New.

Set the Channel, Frequency, Bandwidth.

The Bandwidth function may not be supported depending on the region.

Select the Search. When scanning has finished, a channel is updated in the channel list.

Analogue Channel Tuning

●

Scans for a analogue channel.

Select the New.

Set the Programme, Colour System, Sound System, Channel and Search.

Select the Store. When scanning has finished, a channel is updated in the channel list.

Channel mode

P (programme mode)

●

When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.

C (aerial channel mode) / S (cable channel mode)

●

These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

Transfer Channel List

Screen Menu > Broadcasting > Channel Settings > Transfer Channel List

Try Now

(Depending on the country)

Imports or exports the channel map.

You should connect USB storage to use this function.

The PIN input screen appears. Enter the PIN using your remote.

Import from USB: Import channel list from USB.

●

Export to USB: Export channel list to USB. This function is available when USB is connected.

●

Now

Try Now

Try

Channel Management

Screen Menu > Broadcasting > Edit Channel

Try Now Try Now

Broadcasting

Auto Tuning

Channel List

Guide

Schedule Manager

Edit Channel

Edit Favourites

Channel Settings

The displayed image may differ depending on the model.

Remove channels from the index, and rename analogue channels. The Edit Channel screen icons indicate the following:

●

: An analogue channel

●

: A favourites channel

: A locked channel

In the Edit Channel screen, select the Virtual Remote panel's or the regular remote's TOOLS button to access the following options:

Sorting

●

(digital channels only)

Change the list ordered by name or number.

Remove Channels

Screen Menu > Broadcasting > Edit Channel

Remove registered channels from the index. Removing channels appearing in the Recently Viewed or

Most Viewed list clears the channels from the list only and does not remove them from the index.

From the screen, select the channels you wish to remove. Unselect channels by choosing them

again.

Press { button. The selected channel(s) will be deleted.

Edit Channel Number

Change the number of the channels in edit channels list.

This function may not be supported depending on the region.

Press a button to bring up the edit channels list and select the channel you wish to change the

number of the channels.

Select the number you wish change. Select DoneE or press touchpad to finish.

Programme Rating Lock

Screen Menu > Broadcasting > Programme Rating Lock

(Depending on the country)

The Programme Rating Lock blocks programmes with ratings higher than those desired. This is useful for controlling what children watch on TV. This will not function for programmes originating from external sources, such as DVD players or USB files.

This PIN is required to watch a blocked programme.

The Programme Rating Lock is not available in HDMI or Component mode.

Try Now

Channel Lock

Screen Menu > Broadcasting > Channel Lock

You can lock channels you don't want your children to view. Lock is only available with Channel Lock set to On. Navigate to the Edit Channel screen, select the channels you wish to lock, press b button,

and then enter the password. This locks the selected channels.

Try Now

Channel Unlock

Unlock locked channels. Navigate to the Edit Channels screen, select the locked channels you wish to unlock, press b button and then enter the password. This unlocks the selected channels.

Rename Analogue Channels

Select a channel you wish to rename from the Edit Channel screen, press TOOLS button, and then select Rename channel from the list.

You can now rename the selected channel. The new name can be up to 5 characters long.

Favourite Channels

Screen Menu > Broadcasting > Edit Favourites

Try Now

Broadcasting

Auto Tuning

Channel List

Guide

Schedule Manager

Edit Channel

Edit Favourites

Channel Settings

The displayed image may differ depending on the model.

You can designate frequently watched channels as favourites. The channels assigned as a favourite are displayed with the

symbol on the Edit Channel and channel list screens. You can create up to 5

favourites channel lists. You can also rename and edit favourites channel lists.

From the Edit Favourites screen, select the Virtual Remote panel's or the regular remote's TOOLS button to access the following options:

Sorting

●

Change the list ordered by name or number. This function is not available on analogue channel.

Edit Channel

●

You can manage the channels saved on the TV.

Information

●

View detailed information about the current programme.

Add Channels

Add a channel to a favourites channels list.

Press a button to bring up the channel list containing the channels you wish to add and then

select the channels.

Press b button to bring up a favourites channels list and then { button to add the selected

channels.

Remove Channels

Remove channels from a favourites channels list.

Press b button to bring up a favourites channels list and then select the channels you wish to

remove.

Press { button to remove the channels from the list.

Rearrange the Favourites Channels List

Rearrange the order of the channels in a Favourites Channels List.

Press b button to bring up the a favourites channels list and select the channel you wish to

move.

Press a button to rearrange the order of the selected channel. Select DoneE or press the

touchpad to finish.

Rename a Favourites Channel List

Rename an existing favourites channels list.

Select the Virtual Remote panel's or the regular remote's TOOLS button to display the list. Select

Rename Favourites from the list.

Rename the list in the popup window. The new name can be up to 20 characters long.

Network Configuration

Connecting the TV to a network gives you access to online services such as the Smart Hub and AllShare, as well as software updates.

Wired Network

There are three ways to connect the TV to a Local Area Network (LAN).

External Modem

●

① IP Router + ② External Modem

●

Wall-mounted LAN Outlet

●

Dynamic versus Static IP Addresses

If the network requires a dynamic IP address, use an ADSL modem or router that supports the Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway and DNS values the TV needs to access the Internet, so they do not have to be entered manually. Most home networks use a dynamic IP address.

If the network requires a static IP address, enter the IP address, subnet mask, gateway, and DNS values manually when setting up the network connection. To get the IP address, subnet mask, gateway and DNS values, contact your Internet Service Provider (ISP).

If the network requires a static IP address, use an ADSL modem that supports DHCP. ADSL modems that support DHCP also allow static IP addresses.

Wireless Network

Connect the TV to the Internet using a standard router or modem.

For LED 4500 and 5300 series

Insert the Samsung wireless LAN adapter (WIS09ABGNX, WIS12ABGNX) into one of the TV’s USB ports, referring to the illustration. Without this connection, the TV cannot connect to the Internet wireless.

Using the wireless LAN adapter may cause image retention or radio interference on some TV channels. In those cases, use one of the following methods.

Use a vertical-type wireless LAN adapter.

●

Connect the wireless LAN adapter to a USB extension cable, and insert the cable’s USB plug into

●

one of the TV’s USB ports. Install the wireless LAN adapter on the top of the TV’s back using an adhesive tape.

Wireless Network Precautions

This TV supports the IEEE 802.11a/b/g/n communication protocols. Samsung recommends using

●

IEEE 802.11n. Otherwise when you play video over a network connection, the video may not play smoothly.

For LED 4500 and 5300 series

Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not play smoothly.

To use a wireless network, the TV must be connected to a wireless router or modem. If the

●

wireless router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.

Select a channel that is not currently in use for the wireless router. If the channel set for the

●

wireless router is currently being used by another device, the result is usually interference and/or a communications failure.

Most wireless networks have an optional security system. To enable a wireless network's security

●

system, you need to create a security key using characters and numbers. This security key is then needed to connect to the wireless network.

Network Security Protocols

The TV only supports the following wireless network security protocols and is unable to connect to non-certified wireless routers:

Authentication Modes: WEP, WPAPSK, WPA2PSK

●

Encryption Types: WEP, TKIP, AES

●

If the wireless router has been set to Pure High-throughput (Greenfield) 802.11n mode and the Encryption Type to WEP or TKIP, Samsung SMART TVs will not support the connection in compliance with the new Wi-Fi certification specifications.

If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network using PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically configures the SSID and WPA key settings.

+ 178 hidden pages