Samsung UA32D4000, UA32D4010, UA32D4020 User Manual

LED TV

E-MANUAL

User Manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________

For more information on how to use e-Manual (P.12)

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Still image warning

Avoid displaying still images (like jpeg picture ﬁles) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LCD screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try do display any image on full screen, use TV set picture format menu for best possible match.

• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout

process.

• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

✎

• If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

The appearance may differ depending on the product.

✎

Be careful when you contact the TV because some parts can be somewhat hot.

✎

Installation with a stand. Installation with a wall-mount.

10 cm

10 cm10 cm

10 cm

English - 2

Accessories

✎

Please make sure the following items are included with your T V. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

y Remote Control & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide (Not available in some locations)

y Holder Ring (4EA) y Holder-Wire Stand y AV / Component Adapter

Assembling the Holder-Wire stand

y Power Cord y Cleaning Cloth

English - 3

Viewing the Control Panel

✎

The product colour and shape may vary depending on the model.

Control Panel

Speakers

Remote control sensor Aim the remote control towards this spot on the TV.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

SOURCE

MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.

(Power)

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.

Adjusts the volume. In the OSD, use the and ► buttons on the remote control.

Changes the channels. In the OSD, use the ▼ and ▲ buttons on the remote control.

Turns the TV on or off.

buttons as you would use the ◄

buttons as you would use the

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

English - 4

Viewing the Remote Control

✎

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, and Volume buttons.

Turns the TV on and off.

Press to directly access to channels.

Alternately select Teletext ON,

Double, Mix or OFF.

Adjusts the volume.

Displays the main on-screen menu.

Displays the My Downloads, Watch TV

and Source.

Quickly select frequently used

functions.

Selects the on-screen menu items and changes the values seen on the menu.

Returns to the previous menu.

Buttons used in the

Channel List, Channel Manager,

My Downloads menu, etc.

Use these buttons in My

Downloads and Anynet+ modes.

HDMI

CONTENT

A B C D

SRS

DUAL I-II

P.MODE

E-MANUAL AD/SUBT.

Displays and selects the available video sources.

Selects the HDMI mode directly.

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen.

Displays the EPG (Electronic Programme Guide).

Displays information on the TV screen.

Exits the menu.

P.MODE: Selects picture mode. SRS: Selects the SRS TruSurround

HD mode.

DUAL I-II: Select Dual sound mode. E-MANUAL: Displays the e-Manual

guide.

P.SIZE: Selects the picture size. AD: Audio Description selection.

(Not available in some locations)

SUBT.: Displays digital subtitles.

Installing batteries (Battery size: AAA)

English - 5

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Preset: Connecting the mains and antenna.

VHF/UHF Antenna Cable

TV Rear Panel

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWERP button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the Red button.

Selecting a language

Selecting Store Demo or Home Use

Selecting a country

Selecting an area

Setting the Clock

Mode

Selecting an antenna

Selecting a channel

Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.

(Not available in some locations) Press the ◄ or ► button, then press the ENTERE button. Select the Home Use mode. Store Demo mode is for retail

environments. To return the unit’s settings from Store Demo to Home Use (standard):

Press the volume button on the TV. When the OSD volume is displayed, press and hold MENU for 5 sec.

Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home.

Press the ▲ or ▼ button, then press the ENTERE button. Select the appropriate country. (Not available in some locations)

✎

After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number.

✎

When you input the PIN number, 0-0-0-0 is not available. Press the ▲ or ▼ button, then press the ENTERE button. Select the appropriate area. (Not available in some locations)

Set the Clock Mode automatically or manually.

✎

If you select the Auto, select the time zone which you live. (Australia only) Press the ▲ or ▼ button, then press the ENTERE button. Select Air (Digital & Analogue/Digital/Analogue) or Cable (Digital & Analogue/Digital/

Analogue). Press the ▲ or ▼ button, then press the ENTERE button. Select the channel source to memorise. When setting the antenna source to Cable, a step

appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Tuning.

Press the ENTERE button at any time to interrupt the memorisation process. Select the Watch TV. Press the ENTERE button.

POWER

If You Want to Reset This Feature...

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.

You should do Plug & Play (Menu -> System) again at home although you did in shop.

✎

If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0” : MUTE → 8 → 2 → 4 → POWER (on)

English - 6

+ 12 hidden pages