Samsung TX-R2764, TX-R3064W, TX-R3264, TXR2765, TX-R3065W User Manual

...
Owner’s Instructions
COLOR TELEVISION
TX-R2764/TX-R3064W TX-R3264/TX-R2765 TX-R3065W/TX-R3265 TX-R2664W
Important Warranty Information Regarding Television Format Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are pri­marily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying station­ary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are primar­ily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature, and constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on non-expanded standard format television video and pro­gramming, should be limited to no more than 15% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying any stationary images that exceed the above guide-
lines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily dis­play full screen moving images, not stationary patterns or dark bars. On television models that offer
picture sizing features, use these controls to view the different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven CRT aging as a result of format selection and use, as well as other burned-in images, is not covered by your Samsung limited warranty.
2

CONTENTS

Chapter 1: Your New TV . . . . . . . . . . . . . . . . 5
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Familiarizing Yourself with The TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Side Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 2: Installation. . . . . . . . . . . . . . . . . 11
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . . 11
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . 11
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . 12
Separate VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . . 12
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting to a Cable Box that Descrambles All Channels . . 13 Connecting to a Cable Box that Descrambles Some Channels13
Connecting a VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting an S-VHS VCR. . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting a Second VCR to Record from the TV. . . . . . . . . 17
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting a Digital TV Set-Top Box (480p/1080i). . . . . . . . . . . . . . . 18
Connecting a Camcorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Installing Batteries in the Remote Control. . . . . . . . . . . . . . . . . . . . . . 21
Chapter 3: Operation . . . . . . . . . . . . . . . . . . 22
Turning the TV On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Viewing the Menus and On-Screen Displays. . . . . . . . . . . . . . . . . . . . 24
Viewing the Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Selecting a Menu Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . 26
Storing Channels in Memory (Automatic Method) . . . . . . . . 27
Adding and Erasing Channels (Manual Method). . . . . . . . . . 28
Changing Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Directly Accessing Channels . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using the PRE-CH Button to select the Previous Channel. . . 29
Labeling the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Setting the Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using the Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3
CONTENTS
Chapter 3: Operation (Cont.) . . . . . . . . . . . . 37
Customizing the Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using Automatic Sound Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Viewing an External Signal Source . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Setting the Signal Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Assigning Names to External input mode . . . . . . . . . . . . . . . 40
Chapter 4: Special Features. . . . . . . . . . . . . 41
Fine Tuning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Changing the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Using the R.Surf Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Freezing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Choosing a Multi-Channel Sound (MTS) Soundtrack . . . . . . . . . . . . . 47
Adjusting the Volume Automatically. . . . . . . . . . . . . . . . . . . . . . . . . . 48
Setting the Surround. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Setting the Turbo Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Setting the On/Off Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Setting the Sleep Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setting the Preferred Volume Level and Channel. . . . . . . . . . . . . . . . . 53
Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Setting The On/Off Melody. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Using the V-Chip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Chapter 5: Troubleshooting. . . . . . . . . . . . . 65
Identifying Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Using Your TV in Another Country. . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
4
Chapter One
YOUR NEW TV
YOUR NEW TV

List of Features

Your TV was designed with the latest technology. This TV is a high-performance unit that includes the following special features:
• Full Flat Screen
• Automatic timer to turn the TV on and off
• Adjustable picture and sound settings that can be stored in the TV’s memory
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• A built-in multi-channel sound decoder for stereo and bilingual listening
• Built-in, dual channel speakers
• A special sleep timer
• V-Chip function

Accessories

Once you have unpacked your TV, check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer.
Remote Control(AA59-00322B)/
AAA Batteries(4301-000121)
Owner’s Instructions
Safety Guide Manual
/
Warranty Card; 2EA/
Registration Card
5
YOUR NEW TV
SOURCE

Familiarizing Yourself with The TV

Front Panel Buttons

The buttons on the front panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.
TX-R2764 / TX-R3064W / TX-R3264 / TX-R2664W
TX-R2765 / TX-R3065W / TX-R3265
˛
TV/VIDEO, SOURCE
Press to change between viewing TV programs and signals from other components.
«
MENU
Press to see an on-screen menu of your TV's features.
VOL – and +
Press to increase or decrease the volume. Also used to select items on the on-screen menu.
CH and CH
Press to change channels. Also press to select various items on the on-screen menu.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
TIMER indicator
When the TV is turned on, the TIMER indicator blinks five times. This indicator illuminates when the TIMER mode is set to the “On” position after setting the clock and either the On timer or Off timer, with the remote control. Even if the power is turned off, this indicator stays lit. (Clock must be set before using this function.)
POWER
Press to turn the TV on and off.
6
YOUR NEW TV
S-VIDEO
AV IN1

Side Panel Jacks

You can use the side panel jacks to connect an A/V component that is used only occa­sionally, such as a camcorder or video game. (For information on connecting equipment, see page 20.)
TX-R3064W/TX-R3264 TX-R2764/TX-R2664W
˛
AUDIO INPUT jacks
Used to connect the audio signals from a cam­corder or video game.
«
VIDEO INPUT jack
Used to connect a video signal from a camcorder or video game.
TX-R2765/TX-R3065W TX-R3265
SUPER VIDEO INPUT jack
S-Video signal from an S-VHS VCR or DVD player. Note: In S-Video mode, Audio Output depends what kind of audio input source is connected to the side audio input jacks (AV1).
7
YOUR NEW TV

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. Because there are three sets of input jacks, you can connect three different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 11 – 19.
TX-R2765/TX-R3065W TX-R3265
ANT IN
˛
AUDIO-VIDEO MONITOR OUTPUT jacks
These audio-video signals are identical to A/V signals being displayed on the big screen. (Typically used as the input signals for a recording VCR.)
« ,
VIDEO/AUDIO INPUT jacks
Video and Audio signals from VCRs, DVD players and similar devices. Note: The common jack of component 1 and AV2, component 2 and AV3 input jacks are exclusive relation with each other.
TX-R3064W/TX-R3264 TX-R2764/TX-R2664W
VHF/UHF
Connect to an antenna or to a cable TV system.
COMPONENT 1, 2 INPUT jacks (480i/480p/1080i)
Connect to the audio and component output jacks of a DVD player or Set-Top Box.
SUPER VIDEO INPUT jack
S-Video signal from an S-VHS VCR or DVD player. Note: In S-Video mode, Audio Output depends what kind of audio input source is connected to the side audio input jacks (AV1).
8
YOUR NEW TV

Remote Control

You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV.
You can also use your remote control to operate your Set-Top Box, VCR, DVD and cable box. See page 63 for details.
˛
POWER
Turns the TV on and off.
«
S.MODE
Adjust the TV sound by selecting one of the preset factory settings (or select your personal, cus­tomized sound settings).
P.MODE
Adjust the TV picture by selecting one of the preset factory settings (or select your personal, cus­tomized picture settings).
Number buttons
Press to select channels directly on the TV.
+100
Press to select channels over 100. For example, to select channel 121, press “+100,” then press “2” and “1.”
VOL -, VOL +
Press to increase or decrease the volume.
MUTE
Press to temporarily cut off the sound.
SLEEP
Press to select a preset time inter­val for automatic shutoff.
MENU
Displays the main on-screen menu.
P.SIZE
Press to change the screen size.
R.SURF
Press the R.SURF button to auto­matically return to a preferred channel after a user-preset time delay.
MODE
Selects a target device to be con­trolled by the Samsung remote control (i.e., TV, Set Top Box, VCR, Cable box, or DVD).
PRE-CH
Tunes to the previous channel.
æ
TV/VIDEO
Press to display all of the available video sources (i.e., Antenna/Cable, VCR).
CH and CH (Channel Up/Down)
Press CH or CH to change channels.
INFO
Press to see the time, channel, etc., on-screen.
ı
EXIT
Press to exit the menu.
Up,Down,Left, Right (▲,▼,ˇ ,ˆ )/ ENTER
Press to select highlight up, down, left, or right. While using the on­screen menus, press ENTER to activate (or change) a particular item.
ł
TURBO
Press to turn the TURBO sound On or Off.
ø
MTS (Multichannel Television Stereo)
Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
9
YOUR NEW TV
Remote Control
TV/COMPONENT
Press to switch the TV, COMPO­NENT1 or 2 mode.
VCR(DVD, DVR or STB) Controls
STILL
Press to stop the action during a particular scene. Press again to resume normal video. Note: The still function doesn’t operate in Component 1 or 2 mode.
REW (Rewind)
Press to rewind a tape in your VCR(DVD, DVR or STB).
STOP
Press this button to stop a tape during play, record, rewind or fast forward. If the button is pressed during Full-Automatic play, the function will be can­celled.
PLAY/PAUSE
Press the PLAY/PAUSE button to play back prerecorded tapes or pause the tape.
FF
Press to fast forward the tape in your VCR(DVD, DVR or STB).
SET
Use this button when you are setting up your remote control to operate your Set Top Box, VCR, Cable box or DVD.
RESET
If your remote control is not func­tioning properly, take out the bat­teries and press the reset button for about 2~3 seconds. Re-insert the batteries and try using the remote control again.
10
Chapter Two
INSTALLATION
INSTALLATION

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads” below.
If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads” on next page.
If you have two antennas, see “Separate VHF and UHF Antennas” on next page.

Antennas with 300-ohm Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin flat leads, follow the directions below.
1
Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws.
2
Plug the adaptor into the VHF/UHF terminal on the bottom of the back panel.
11
INSTALLATION

Antennas with 75-ohm Round Leads

1
Plug the antenna lead into the VHF/UHF terminal on the bottom of the back panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna leads to the combiner.
2
Plug the combiner into the VHF/UHF terminal on the bottom of the rear panel.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1
Plug the incoming cable into the VHF/UHF antenna terminal on back of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
12
INSTALLATION

Connecting to a Cable Box that Descrambles All Channels

1
Find the cable that is con­nected to the ANTENNA OUT terminal on your cable box.
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
2
Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.
2
Connect this cable to a two-way splitter.
3
Connect a coaxial cable between an OUTPUT ter­minal on the splitter and the IN terminal on the cable box.
Incoming Cable
Incoming Cable
Splitter
This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.
Splitter
Cable Box
13
INSTALLATION
4
Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.
5
Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.
6
Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV.
Incoming
Cable
Incoming
Cable
Incoming
Cable
Splitter
Splitter
Splitter
Cable Box
Cable Box
Cable Box
RF (A/B)
Switch
RF (A/B)
Switch
RF (A/B)
Switch
TV Rear
After you’ve made this connection, set the A/B switch to the “A” position for normal view­ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
14
INSTALLATION
IN
AN

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 11-14). Skip step 1 if you have not yet connected to an antenna or a cable system.
1
Unplug the cable or antenna from the back of the TV.
2
Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.
3
Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.
Incoming Cable or Antenna
VCR Rear Panel
VCR Rear Panel
Coaxial Cable
TV Rear Panel
ANT
A coaxial cable is usually included with a VCR. (If not, check your local electronics store).
4
Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV.
VCR Rear Panel
Audio Cable
TV Rear Panel
5
Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.
VCR Rear Panel
Video Cable
TV Rear Panel
Follow the instructions in “Viewing an External Signal Source” to view your VCR tape.
ANT IN
15
INSTALLATION
A

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.
2
Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the 1 AUDIO INPUT jacks on the TV.
VCR Rear Panel
VCR Rear Panel
TV Rear Panel
Coaxial Cable
TV Rear Panel
Audio Cable
Make sure the jacks you are using are underneath the number “1.”
3
Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO INPUT jack on the TV.
VCR Rear Panel
Video Cable
ANT IN
TV Rear Panel
ANT IN
16
An S-video cable is usually included with an S-VHS VCR (If not, check your local electronics store.)
INSTALLATION

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows:
1
Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN jacks on the VCR.
TV Rear Panel
VCR Input Panel
ANT IN
Audio Cable
(The VCR input jacks might be either on the front or on back of the VCR.)
2
Connect a video cable between the VIDEO OUT jack on the TV and the VIDEO IN jack on the VCR.
TV Rear Panel
ANT IN
VCR Input Panel
Video Cable
Refer to your VCR’s instructions for more information about how to record using this kind of connection.

Connecting a DVD Player (480i)

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
Connect a set of audio cables between the COMPONENT INPUT 1 (L, R) or COMPONENT INPUT 2 (L, R) jacks on the TV and the AUDIO OUT jacks on the DVD player.
2
Connect a video cable between the COMPO­NENT INPUT 1 (Y, PB, PR) or COMPONENT INPUT 2 (Y, PB, PR) jacks on the TV and the COM­PONENT VIDEO OUT (Y, PB, PR) jacks on the DVD player.
DVD Player Rear Panel
DVD Player Rear Panel
TV Rear Panel
Audio Cable
TV Rear Panel
Video Cable
ANT IN
Note: For an explanation of Component video, see your DVD player's owner's manual.
17
INSTALLATION

Connecting a Digital TV Set-Top Box (480p/1080i)

Connecting to Y,PB,P
R
Connect the Y, PB, and PRvideo outputs of the set-top box to their corresponding inputs on the TV. Next, connect the Left and Right audio from the set-top box to the corre­sponding L and R terminals on the TV. (The connections for a typical set-top box are shown below.)
1
Connect a coaxial cable between the ANTENNA OUT terminal on the Set Top Box and the antenna terminal on the TV.
2
Connect a set of audio cables between the COM­PONENT INPUT 2 (L, R) or COMPONENT INPUT 1 (L, R) jacks on the TV and the AUDIO OUT jacks on the Set Top Box.
Set Top Box Rear Panel
Coaxial Cable
Set Top Box Rear Panel
Audio Cable
TV Rear Panel
ANT IN
TV Rear Panel
18
ANT IN
INSTALLATION
3
Connect a video cable between the COMPO­NENT INPUT 2 (Y, PB, PR) or COMPONENT INPUT 1 (Y, PB, PR) jacks on the TV and the VIDEO OUT (Y, PB, PR) jacks on the Set Top Box.
Set Top Box Rear Panel
TV Rear Panel
Video Cable
Note: For detailed information, refer to the Set Top Box instruction manual.
ANT IN
19
INSTALLATION

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. (Also see “Viewing an External Signal Source” on page 39).
1
Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder.
Camcorder
Output Jacks
2
Connect an audio cable between the AUDIO OUTPUT jack on the camcorder and the AUDIO terminals on the side of the TV.
3
Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the VIDEO terminal on the side of the TV.
Camcorder
Output Jacks
Camcorder
Output Jacks
Audio Cable
Y-Connector
Video Cable
TV Side Panel
TV Side Panel
The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.
Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different.
20
INSTALLATION

Installing Batteries in the Remote Control

1
Slide the cover out com­pletely.
2
Install two AAA size batteries.
Make sure to match the “+” and
” ends of the batteries with the
diagram inside the compartment.
3
Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
21
Loading...
+ 47 hidden pages