Samsung TX-14N3, TVCR15FLAT, TVCR-152FLAT, TVCR-142, TB15X5 User Manual

...

COMBI VISION COMBINED COLOUR TELEVISION and VIDEO CASSETTE RECORDER

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

CRYSTAL PLAYBACK

(depending on the model)

Safety Instructions

☛

Displaying any stationary images that exceed the long time, it can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars.

NEVER OPEN THE TELEVISION

The following illustrations represent the precautions to be taken when using and moving your COMBI VISION.

Caution

☛

Main voltage : 220V-240V~, 50Hz (or Indicated on the rear of the TV set).

The lightning flash with arrowhead in the triangle is a warning sign alerting you to dangerous voltage inside the product.

The exclamation point within the triangle is a warning sign alerting you to important instructions accompanying the product.

WARNING: TO PREVENT DAMAGE WHICH MAY

RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRICAL SHOCK,

DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

10%

5°

35°

75%

Contents

FOREWORD

■

Safety Instructions......................................................................................... 2

■

Caution.......................................................................................................... 2

CONNECTING AND PREPARING YOUR COMBI VISION

■

Connecting the Aerial or Cable Television Network...................................... 5

■

Connecting a Decoder................................................................................... 5

■

Connecting Other Video Equipment.............................................................. 6

■

Inserting the Batteries in the Remote Control................................................ 7

■

Switching Your Combi Vision On and Off...................................................... 7

■

Automatic Degaussing to Remove Colour Patches....................................... 8

■

Becoming Familiar with the Remote Control................................................. 8

■

Becoming Familiar with the Menu System .................................................... 9

■

Selecting a Menu Option............................................................................... 10

■

Choosing Your Language.............................................................................. 11

■

Setting the Date and Time............................................................................. 12

SETTING THE CHANNELS

■

Storing the Stations Automatically (depending on the model)....................... 13

■

Sorting and/or Clearing the Stored Channels................................................ 14

■

Changing Stations......................................................................................... 15

■

Selecting a Station Numbered Ten or Over................................................... 15

■

Storing the Stations Manually........................................................................ 16

■

Activating the 3DB LNA (Low Noise Amplifier) Feature

(depending on the model).............................................................................. 17

USING THE TELEVISION FUNCTION

■

Adjusting the Picture and Storing Your Preferences..................................... 18

■

Adjusting the Picture Setting ......................................................................... 18

■

Adjusting the Volume..................................................................................... 19

■

Adjusting the Sound and Storing Your Preferences (depending on the model)

.. 20

■

Adjusting the Sound Setting (depending on the model)................................ 20

■

Selecting the Sound Mode (depending on the model) .................................. 21

■

Selecting the Audio output Mode (depending on the model)......................... 21

■

Switching the Sound Off Temporarily (MUTE) .............................................. 22

■

Setting the Combi Vision to Switch On Automatically ................................... 22

■

Setting the Sleep Timer................................................................................. 23

■

Viewing Pictures from External Sources ....................................................... 23

■

Displaying Information on the Screen............................................................ 24

USING THE VCR FUNCTION

■

Cassette Types and Recording Speeds (Option).......................................... 25

■

Protecting a Recorded Cassette.................................................................... 25

■

Selecting the Video Standard (depending on the model).............................. 26

■

Playing a Cassette......................................................................................... 26

You have just purchased a

SAMSUNG COMBI VISION combined

colour television and video cassette recorder.

Please take the time to read these instructions,

as they will enable you to set up your

COMBI VISION easily.

P 02

Contents

(cont.)

USING THE VCR FUNCTION (cont.)

■ Using the Crystal Playback.............................................................................. 27

■ Adjusting the Picture Quality during Playback................................................. 27

■ Adjusting the Picture Contours........................................................................ 27

■ Selecting the Type of Cassette Tape............................................................... 28

■ Rewinding and Fast-forwarding a Cassette..................................................... 28

■ Playing a Cassette in Slow Motion .................................................................. 29

■ Playing a sequence Frame by Frame.............................................................. 29

■ Recording a Programme Directly..................................................................... 30

■ Recording a Programme with Automatic Stop................................................. 31

■ Using the (UK: ) Feature (Option)................................... 32

■ Setting the VCR Unit to Record a Programme Automatically.......................... 34

■ Checking a Preset Recording.......................................................................... 36

■ Cancelling a Preset Recording........................................................................ 36

SEARCHING FOR A SEQUENCE

■ Using the Tape Counter to Search for a Sequence......................................... 37

■ Using the Indexes to Search for a Sequence.................................................. 38

■ Scanning the Index Markings .......................................................................... 38

■ Repeating Playback of a Sequence or Cassette............................................. 39

USING THE TELETEXT FEATURE (DEPENDING ON THE MODEL)

■ Teletext Feature............................................................................................... 40

■ Displaying the Teletext Screen........................................................................ 41

■ Selecting Display Options................................................................................ 41

■ Selecting a Teletext Page................................................................................ 42

■ Storing Teletext Pages .................................................................................... 43

■ Recalling a Stored Teletext Page.................................................................... 43

RECOMMENDATIONS FOR USE

■ Using the Buttons on the Front Panel.............................................................. 44

■ Locking the Front Panel................................................................................... 44

■ Connecting Earphones.................................................................................... 45

■ Cleaning the Video Heads............................................................................... 45

■ Before Contacting the After-sales Service....................................................... 46

■ Technical Specifications.................................................................................. 47

■ Wiring the Mains Power Supply Plug (UK Only).............................................. 48

■ SCART Connector Wiring................................................................................ 49

■ Using Your Combi Vision Abroad.................................................................... 50

■ Glossary........................................................................................................... 51

■ Front View of Your Combi Vision (depending on the model)........................... 52

■ Rear View of Your Combi Vision (depending on the model) ........................... 53

■ Teletext Control Buttons (Teletext Option Only).............................................. 54

■ Infrared Remote Control (All Functions Except Teletext) ................................ 55

01:28

Press Hold down Important Note

☛

➢

Symbols

To view television channels correctly, a signal must be received by the set from one of the following sources:

◆ An outdoor aerial

◆ A cable television network

Plug the aerial or cable network input cable into the socket at the bottom of the television’s rear panel.

➢ If you wish to subscribe to a cable network, contact your

local dealer.

This COMBI VISION is fully equipped to receive scrambled Pay TV broadcasts.

Example

: Premiere broadcasts.

➢ If you wish to connect both a decoder and an external

VCR to the SCART connector, you must plug:

◆ The decoder into the VCR

◆ The VCR into the COMBI VISION (refer to

“Connecting Other Video Equipment” on the following page for further details)

1 Plug the SCART cable supplied with the decoder into the SCART

connector on the rear of the set.

2 Plug the other end into the decoder.

Connecting the Aerial or Cable Television Network

Connecting a Decoder

Cable Television Network

REAR OF THE

TELEVISION

REAR OF THE TELEVISION

SCART

Decoder

Connecting Other Video Equipment

➢ The RCA connectors are used for equipment, such as VCRs or camcorders.

FRONT (or SIDE) OF THE TELEVISION

(depending on the model)

➢ The A/V connector is used for equipment with an RGB output, such as VCRs,

video games, video disc players, camcorders and personal computers.

➢ Some A/V devices shown on the right panel are option.

➀ This end can be fitted with a SCART connector or RCA connectors.

REAR OF THE TELEVISION

(depending on the model)

➀

Camcorder

VCR

SCART cable

☛

It is an infringement of copyright laws to copy pre-recorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.

➢ When external equipment is plugged into both the front (or side) and rear connectors, the front (or side)

connector has priority. To use the equipment connected to the rear connector, you must first unplug the equipment connected to the front (or side) RCA connectors.

Video game

Video disc player

Camcorder

VCR

RCA cable

The mains lead is attached to the right side of your COMBI VISION.

☛ If you have purchased this set in the United Kingdom,

refer to page 48 for further instructions on plug wiring.

1 Plug the mains lead into an appropriate wall socket and press the Master

Switch ( I ) on the front panel. Result

: The set is placed in Standby mode and the Standby indicator

lights up on the front panel.

2 To switch your set on, press POWER ( ).

Result

: If stations have already been stored, the station (or AV input)

that you were watching prior to switching off the unit is selected automatically. You can now use the remote control, as required.

3 To switch the set off, press POWER ( ) again.

➢

If you wish to switch the COMBI VISION off completely, disconnect it from the wall socket or press the Master Switch. This is particularly recommended when you will not be using the set for a long period of time and you have not set the VCR unit to record a programme automatically.

Switching Your Combi Vision On and Off

You must insert or replace the batteries in the remote control when you:

◆ Purchase the television

◆ Find that the remote control is no longer operating

correctly

1 Remove the cover on the rear of the remote control by pressing the symbol

downwards and then pulling firmly to remove it.

2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to

respect the polarities:

◆ + on the battery against + on the remote control

◆ - on the battery against - on the remote control

3 Replace the cover by aligning it with the base of the remote control and

pressing it back into place.

➢

Do not mix battery types, i.e. alkaline and monganese.

Inserting the Batteries in the Remote Control

INPUT

Becoming Familiar with the Remote Control

Some buttons on the remote control are used for several common functions. The following table presents the most frequently used buttons and their functions.

Button Viewing Function Menu Function

P ▲ Used to display the next Used to select the previous menu

stored channel. option.

P ▼ Used to display the Used to select the next menu

previous stored channel. option.

+ Used to increase the Used to:

volume. ◆ Display a submenu

containing selections that you can make for the current menu option

◆ Search forwards manually for channels

◆ Increase the value of a menu option

Used to reduce the Used to: volume. ◆ Display a submenu containing

selections that you can make for the current menu option

◆ Search backwards manually for channels

◆ Reduce the value of a menu option

MENU Used to display the Used to exit the television menu

( ) television menu. and return to normal viewing.

V.MENU Used to display the Used to exit the VCR menu and

( ) VCR menu. return to normal viewing.

A degaussing coil is mounted around the picture tube so that external degaussing after moving the receiver is normally unnecessary. If the receiver is moved or placed in a different direction, or, a coloured patch appears on the screen, the main power switch must be switched to the off position for 120minutes or the power cord must be unplugged for the same interval to allow the automatic degauss circuits to operate properly.

For safety, the receiver should be switched off from the main power switch when it is unattended.

➢

Magnetic fields can cause your television to malfunction. Degaussing is a process that neutralises magnetic fields.

Automatic Degaussing to Remove Colour Patches

INPUT

V.MENU MUTE

DISPLAY P.STD

Pre.

The most common functions are assigned a specific button on the remote control. To avoid having too many buttons on the remote control however, the other functions can be selected by displaying one of two menus:

◆ Television menu

◆ VCR menu

The television menu contains options and is displayed by pressing MENU ( ).

Option Function

PICTURE Used to adjust the contrast, bright, sharpness and color. SOUND (Option) Used to adjust the bass, treble, balance, volume and

pseudo stereo.

TUNE Used to store channels, either manually or automatically. SETUP Used to:

◆ Lock the front panel on the set

◆ Set the COMBI VISION to switch on automatically

◆ Activate the 3DB LNA feature (Option)

--:-- Used to set the date and time.

The VCR menu contains options and is displayed by pressing V.MENU ( ).

Option Function

RECORD PROGRAMME Used to set the VCR to record a programme

automatically.

REPEAT Used to repeat playback of all or part of a cassette. PICTURE Used to adjust the picture contours. TAPE SELECT Used to select the length of cassette. V.SYSTEM Used to select the video standard.

➢

Only PAL System is available on UK model and so the V.SYSTEM doesn’t need.

SPEED (Option) Used to select the recording speed. NICAM (Option) ◆ To Mono mode, select the OFF.

(Only set at this position to record the standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions.)

◆ To NICAM mode, select the ON. (Normally set at this position.)

Becoming Familiar with the Menu System

PICTURE

SOUND TUNE SETUP

--:--

ADJUST SELECT EXIT

VCR MENU

RECORD PROGRAMME

REPEAT : OFF PICTURE : NORMAL TAPE SELECT : E180/T120 V.SYSTEM : AUTO SPEED : SP NICAM : OFF

ADJUST SELECT EXIT

V.MENU MUTE

DISPLAY P.STD

V.MENU MUTE

DISPLAY P.STD

Selecting a Menu Option

To select a menu or sub-menu option, follow the procedure below.

1 Press MENU ( ) or V.MENU ( ).

Result

: The corresponding menu is displayed.

2 Press P ▲ or ▼ one or more times until the required option is displayed. 3 To display the possible values of an option or its sub-menu, press + or -.

➢ To move around a sub-menu and select the required function,

press P ▲ or ▼.

4 Follow the detailed instructions for each function (channel storage,

adjustments, etc.) in the rest of this booklet.

5 When you are satisfied with your settings, press MENU ( ) or V.MENU

( ) one or more times to return to normal viewing.

➢

Step 5 is optional as the menu disappears automatically after about 30 seconds.

V.MENU MUTE

DISPLAY P.STD

When you start using your television for the first time, you must select the language in which the various menus and indications are displayed.

1 Press the LANG.SEL button.

Result

: The list of available languages is displayed.

2 Press P ▲ or ▼ one or more times until the required language is selected. 3 When you are satisfied with your choice, press LANG.SEL to return to

normal viewing.

➢ If you do not press this button, the list disappears automatically

after a few seconds.

Result

: The menus are then displayed in the language of your choice.

➢

The list of languages displayed may change without notice.

Choosing Your Language

LANGUAGE

ENGLISH

DEUTSCH FRANÇAIS NEDERLANDS ESPAÑOL ITALIANO SVENSKA

SELECT

REC

EJECT

INDEX SLEEPMEMORY

TRK CLEARLANG.SEL

P/S

CRYSTAL PB

Setting the Date and Time

Your COMBI VISION contains a 24-hour clock and calendar used to:

◆ Preset the VCR to record up to six programmes

automatically over a period of one month

◆ Switch the set on or off automatically at a specific time

You must set the date and time when:

◆ You purchase the COMBI VISION

◆ The power supply is switched or cut off

1 Press MENU ( ) on the remote control.

Result

: The television menu is displayed.

2 Select the option by pressing P ▲ or ▼ the appropriate number of

times, followed by the + button. Result

: The current date and time are displayed.

3 Enter the hour and then the minutes by pressing the numeric buttons.

➢ When a time is entered, all single digits must be preceded by a

zero. Example: 3:07 p.m.

Enter 15:0

4 To select the date, press P ▼. 5 Press the numeric, + or - buttons to enter the:

◆ Day

◆ Month

◆ Year

Result

: The day of the week is displayed automatically next to the date.

➢ When a date is entered, all single digits must be preceded by a

zero.

Example

: 6th April 2000

Enter 06/0

4/00

6 When you are satisfied with your settings, press MENU ( ) twice to

return to normal viewing.

➢ If you do not press a button for more than 30 seconds, the

display disappears automatically. If you make a mistake when entering the date or time,

press the

button one or more times to return to the

incorrect figure and enter the correct one. You cannot set the date and time during a programmed

recording.

MENU PICTURE TUNE SETUP

--:--

ADJUST SELECT EXIT

TIME : 15:07

DATE : 06/04/00 THU

ADJUST SELECT EXIT

V.MENU MUTE

DISPLAY P.STD

Pre.

You can scan the frequency ranges available on your television and in your country and store all the stations found automatically. If you have a dual tuner model, the stations are stored for both tuners at the same time (television and VCR).

The stations are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated programme numbers may not correspond to those by which you wish to identify the stations. If this is the case, you can then sort them manually and clear any stations that you do not wish to watch (see page 14 for further details).

➢

If you wish to receive a scrambled television station, check that the decoder is switched off

. Switch it back on

once you have finished storing the stations.

1 Press MENU ( ).

Result

: The television menu, illustrated opposite, is displayed.

2 Select the TUNE option by pressing P ▼, followed by the + button.

Result

: The tuning menu is displayed.

➢ The TUNE option is not available if:

◆ The AV input is selected; press INPUT ( ) to select an

ordinary station

◆ A video cassette is playing; stop the cassette

3 Select the AUTO TUNE option by pressing P ▼, followed by the + button.

Result

: The AUTO TUNE menu is displayed with the COUNTRY is

selected.

4 Select your country by pressing the +, The following countries are

available: AUSTRIA - BELGIUM - CROATIA - DENMARK - FINLAND

- FRANCE - GERMANY - ICELAND - IRELAND - ITALY NETHERLANDS - NORWAY - POLAND - SPAIN - SWEDEN SWITZERLAND - TURKEY - UK.

5 Select the AUTO TUNE option by pressing P ▼, followed by the + button.

Result

: The scan starts and the stations are stored in the order in

which they are found, starting with programme 00. The scan stops automatically once all the frequency bands have been scanned.

➢ You can stop the scan at any time by pressing MENU ( ).

When the scan stops before more than two stations are stored, many of the stored stations before the scan is done remain “stored”.

Storing the Stations Automatically

(depending on the model)

P 02

MENU PICTURE

TUNE

SETUP

--:--

ADJUST SELECT EXIT

TUNE MANUAL TUNE

AUTO TUNE

ADJUST SELECT EXIT

AUTO TUNE

COUNTRY : UK

AUTO TUNE :

ADJUST SELECT EXIT

P 1 FREQUENCY : 225.00 MHz

STOP

INPUT

Sorting and/or Clearing the Stored Channels

The Sort operation enables you to reassign programme numbers to previously stored stations or to clear stations that you will never watch. This operation is often required after you have stored the stations automatically. You need only keep the stations that you wish to watch.

1 Select the station to be assigned a new programme number, using the

numeric buttons or the P ▲ or ▼ buttons.

2 Press MENU ( ).

Result

: The television menu is displayed.

3 Select the TUNE option by pressing P ▼, followed by the + button.

Result

: The tuning menu is displayed with the

MANUAL TUNE is

selected.

➢ The TUNE option is not available if:

◆ The AV input is selected; press INPUT ( ) to select an

ordinary station

◆ A video cassette is playing; stop the cassette

4 Press the + button. 5 If you wish to... Then...

Assign a new number 1 Select the NEW PR. option and enter the to a preset station new programme number to be assigned to

the station. Example: To move the station from

programme 21 to 02, enter 02.

2 Press MEMORY ( ) to store the change.

Result

:STORE is displayed briefly in

red.

Clear a preset 1 Select CURRENT PR.. channel 2 Press CLEAR ( X ).

Result: X:CLEAR is displayed briefly in

red and the station is cleared. The programme number can be reused for another station. To assign a new station, store a new station manually (refer to page 16 for further details on this function).

6 Repeat Step 5 if you wish to reassign or clear other programmes;

otherwise, press MENU ( ) the required number of times to return to normal viewing.

➢ If you wish to cancel the operation without taking into

account your changes, press MENU ( ) before

you

press MEMORY ( ).

MENU PICTURE

TUNE

SETUP

--:--

ADJUST SELECT EXIT

CURRENT PR. : P O

NEW PR. : P 0 NAME : - - - - SEARCH : FREQUENCY : 192.00MHz AFT : ON SYSTEM : AUTO

:STORE X:CLEAR EXIT

ADJUST SELECT

TUNE

MANUAL TUNE

AUTO TUNE

ADJUST SELECT EXIT

V.MENU MUTE

DISPLAY P.STD

REC

EJECT

INDEX SLEEPMEMORY

TRK CLEARLANG.SEL

P/S

CRYSTAL PB

Once you have stored the channels on your COMBI VISION, you can select them easily via your remote control.

To switch... Press...

To the next station P ▲. To the previous station P ▼. To the station of your choice The appropriate numeric button(s);

see the section below for further details.

Repeatedly between the last PRE-CH ( ) as many times as you require. two stations displayed

When selecting a station stored at programme position ten or higher, follow the instructions below.

1 Press the

-/--

button on the remote control.

Result: P-- is displayed in the top left-hand corner of the screen.

2 Enter the two-digit station number.

Example

: To select station 42, press 4 followed by 2.

3 To enter one-digit station numbers:

◆ Precede the number with a zero (0) or

◆ Press the -/-- button again

Result: P- is displayed; you can now enter the required one-digit

number without a zero.

Changing Stations

Selecting a Station Numbered Ten or Over

P 02

P--

V.MENU MUTE

DISPLAY P.STD

Pre.

Storing the Stations Manually

You can store up to 100 television stations, including those received via the cable network. If you have a dual tuner model, the stations are stored for both tuners at the same time (television and VCR).

When storing stations manually, you can choose:

◆ Whether or not to store each of the stations found

◆ The programme number by which you wish to identify

each stored station

◆ To enter the frequency of the station to be stored

directly, if you know it

You have about 30 seconds to make each selection described below. If you do not make a selection within this period of time, the menu disappears.

➢

If you wish to receive a scrambled television station, check that the decoder is switched off. Switch it back on once you have finished storing the stations.

1 Press MENU ( ).

Result: The television menu is displayed.

2 Select the TUNE option by pressing P ▼, followed by the + button.

Result: The tuning menu is displayed with the MANUAL TUNE is

selected.

➢ The TUNE option is not available if:

◆ The AV input is selected; press INPUT ( ) to select an

ordinary station

◆ A video cassette is playing; stop the cassette

3 Press the + button.

Result

: The list of options is displayed.

4 If you... Then...

Know the frequency of ◆ Select the FREQUENCY option by the station to be stored pressing P ▼ the required number of

times.

◆ Enter the required frequency by pressing the numeric buttons or the + and - buttons. Result: The station is displayed.

◆ Go to Step 5 on the following page.

Do not know the frequency ◆ Select the SEARCH option by pressing of the station to be stored P ▼ the required number of times.

◆ Press:

to search backwards through the frequencies

to search forwards through the frequencies

Result: When a station is found,

the searching stops and the channel is displayed on the screen. You can then:

- Continue the search by pressing + or - again

- Store the station; go to step

5 on the following page

MENU PICTURE

TUNE

SETUP

--:--

ADJUST SELECT EXIT

CURRENT PR. : P O NEW PR. : P 0 NAME : - - - - SEARCH :

FREQUENCY : 192.00MHz

AFT : ON SYSTEM : AUTO

:STORE X:CLEAR EXIT

ADJUST SELECT

CURRENT PR. : P O NEW PR. : P 0 NAME : - - - - -

SEARCH :

FREQUENCY : 192.00MHz AFT : ON SYSTEM : AUTO

:STORE X:CLEAR EXIT

ADJUST SELECT

TUNE

MANUAL TUNE

AUTO TUNE

ADJUST SELECT EXIT

V.MENU MUTE

DISPLAY P.STD

5 When the station to be stored appears on the screen, select the NEW PR.

option by pressing P ▲ or P ▼ the required number of times.

6 Enter the programme number to be assigned to the channel using the

numeric, + or - buttons.

7 Press MEMORY ( ) to store the station.

Result: :STORE is displayed briefly in red.

8 To store other stations, return to Step 4.

Otherwise, press MENU ( ) the appropriate number of times to return to normal viewing.

➢

◆ If you wish to cancel the operation without storing the

station, press MENU ( ) before

you press MEMORY

().

◆ If you have already stored the station, you can clear it and replace it with a different station.

To clear a station, refer to the section entitled “Storing and/or Clearing the Stored Stations” on page 14.

Storing the Stations Manually

(cont.)

P 02

CURRENT PR. : P O

NEW PR. : P 1

NAME : - - - - SEARCH : FREQUENCY : 192.00MHz AFT : ON SYSTEM : AUTO

:STORE X:CLEAR EXIT

ADJUST SELECT

This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, but not noise.

This feature is working only weak signal condition, and that is memorized on current channel, additional.

1 Press the MENU button ( ).

Result

: The television menu is displayed.

2 Select the SETUP option by pressing P ▲ or ▼ buttons one or more times,

followed by the + button.

3 To activate this feature, press the + button to set the 3DB LNA option to

ON.

4 Press the MENU button ( ) the required number of times to return to

normal viewing.

5 If you wish to deactivate this feature, repeat the procedure and set the

3DB LNA option to OFF.

Activating the 3DB LNA (Lo w Noise Amplifier) Feature

(depending on the model)

MENU PICTURE TUNE

SETUP

--:--

ADJUST SELECT EXIT

SETUP PANEL LOCK : OFF ON TIMER : OFF

3DB LNA : ON

ADJUST SELECT EXIT

REC

EJECT

INDEX SLEEPMEMORY

TRK CLEARLANG.SEL

P/S

CRYSTAL PB

+ 39 hidden pages