How it Works
Samsung
Loading...
TWIN2000
Users Manual
31 pgs433.08 Kb0

Samsung TWIN2000 Users Manual

Video
Cassette Recorder
Owner ’s Manual
SV-D142P SV-D52P
Safety Instructions
ii
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour eviter les chocs electriques, introduire la lame le plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu’au fond. Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is an infringement of U.S. copyright laws. Certain Canadian programs may be copyrighted and any unauthorized recording in whole or in part may be a violation of these rights.
To prevent damage which may result in fire or electric shock hazard,
do not expose this appliance to rain or moisture.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
As an ENERGY STAR Partner, Samsung Electronics America, Inc.
has determined that this product or product model meets the ENERGY
STAR guidelines for energy efficiency
Important Safety Instructions
1. Read Instructions-All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions-The safety and operating instructions should be retained for future reference.
3. Heed Warnings-All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions-All operating and using instructions should be followed.
5. Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. Attachments-Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture-Do not use this product near water-for example near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
8. Accessories-Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manu­facturer.
Safety Instructions
iii
9. Cart Usage-A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
10. Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
11. Power Sources-This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
12. Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
13. Outdoor Antenna Grounding-If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA70 provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharg
e unit, size of
grounding conductors, location of antenna
discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
14. Lightning-For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
15. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
16. Overloading-Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
18. Servicing-Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a When the power-supply cord or plug is damaged. b If liquid has been spilled or objects have fallen into the product. c If the product has been exposed to rain or water. d If the product does not operate normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
e If the product has been dropped or damaged in any way. f When the product exhibits a distinct change in performance-this indicates a need for service.
20. Replacement Parts-When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
21. Safety check-Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
22. Heat-The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
Antenna Lead-in Wire
Ground Clamp Antenna Discharge Unit
(NEC Section 810-20) Grounding Conductors (NEC Section 810-21)
Power Service Grounding Electrode System (NEC Section 810-21)
Grounding Clamps
Electric Service Equipment
NEC-NATIONAL ELECTRICAL CODE
Table of Contents
iv
Safety Instructions Your New VCR
Features . . . . . . . . . . . . . . . . . . . . . . . . .1
Accessories . . . . . . . . . . . . . . . . . . . . . . .1
Front Panel and Display . . . . . . . . . . . . .2
Remote Control . . . . . . . . . . . . . . . . . . . .3
VCR Setup
Rear Panel . . . . . . . . . . . . . . . . . . . . . . .6
Connections . . . . . . . . . . . . . . . . . . . . . .6
Plug and Play . . . . . . . . . . . . . . . . . . . . .8
Using Menus and the Remote Control . . .9
Selecting the On-Screen Language . . . . .9
Setting the Clock . . . . . . . . . . . . . . . . . . .10
Setting the Channels . . . . . . . . . . . . . . . .12
VCR Functions . . . . . . . . . . . . . . . . . . . .14
VCR Operation
Playing a cassette . . . . . . . . . . . . . . . . . .15
Instant play . . . . . . . . . . . . . . . . . . . . . . .15
Tape Controls . . . . . . . . . . . . . . . . . . . . .15
Using the DISPLAY Button . . . . . . . . . . . .18
Tracking . . . . . . . . . . . . . . . . . . . . . . . . .19
About Video Cassette Tapes . . . . . . . . . .19
Recording
Recording . . . . . . . . . . . . . . . . . . . . . . . .20
One Touch Recording(OTR) . . . . . . . . . .20
Audio
Timer Recording . . . . . . . . . . . . . . . . . . .21
Choosing Audio . . . . . . . . . . . . . . . . . . . .22
Copying or Dubbing a Video . . . . . . . . . . . . . .23
Care and Maintenance . . . . . . . . . . . . . . . . . . .24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .25
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .26
Your New VCR
1
• Auto Clock Set
• Plug and Play
• 24 Hours x 7 Days Timer Back-up
• Auto Power off
• Instant Play
• One Touch Recording (OTR) up to four hours
• Tri-lingual on-screen programming
(English/Spanish/French)
• Two Button Shuttle for various playback speeds
• Digital Auto Tracking
• Special effects playback, including slow motion
• Built-in HQ (High Quality) video circuitry
• One-month eight event timer programming
• Key Lock-disables all of the key functions
• Hi-Fi Stereo sound (SV-D142Ponly)
• Luminescent Universal Remote Control. ;Controls most TVs, Cable Boxes and DSS®Boxes.
(SV-D142Ponly)
• Auto Line2 Input Detect (SV-D142P only)
• Child Door Lock; Cassette Door Locking System (SV-D142Ponly)
Check to make sure the following items have been included with your VCR.
SHUTTLE
V-LOCK
REPLAY F.ADV/SKIP
TV/VCR PREV.CH
R
E
C
R
E
C
.
S
P
E
E
D
L
I
N
E
I
N
A
U
D
I
O
S
E
A
R
C
H
/
E
X
I
T
C
L
E
A
R
D
I
S
P
L
A
Y
POWER EJECT
CH/TRK
VCR
TV
CABLE/DSS
ENTER
MENU
SLOW
VOL
100
1.5V
1.5V
Remote
Control
Batteries for
remote(2AA)
RF-Cable
Conversion
Plug
Owner’s Manual
Features
Accessories
Owner’s
Manual
Your New VCR
2
TIMER Indicator
Light when a timer Recording is set.
VCR Indicator
Light when a picture
source is VCR.
TAPE Indicator
Lights when a
tape is inserted.
Hi-Fi Indicator
Lights when the VCR receives a Hi-Fi broadcast.
Number Display
Displays current channel number, clock time, time remaining or tape counter.
MENU
1
POWER
Press to turn the VCR on and off.
2
EJECT
Press to eject a tape or clear a timer program on the menu screen.
3
CASSETTE COMPARTMENT
Insert a video cassette.
4
REW (REWIND)
Press to rewind in stop mode or reverse search in play mode.
5
F.F (FAST FORWARD)
Press to fast forward in stop mode or forward search in play mode.
6
PLAY
Press to play tape.
7
STOP
Press to stop tape or press to move a cursor to the right on
the menu screen.
8
RECORD
Press to record or press to move a cursor to the left on
the menu screen.
9
MENU
Press to display or clear the menu screen.
10
CHANNEL
▼▲
Press to change channels or press to move a cursor up or down on the menu screen.
11
LINE IN2
Input signal from another VCR or camcorder.
VCR
TIMER
Front Panel and Display
2 1 3 4 5
10 9 8 7 6
11
SV-D142P
MENU
REW F.F
2 1 3 4 5
10 9 8 7 6
SV-D52P
Your New VCR
3
SHUTTLE
V-LOCK
REPLAY F.ADV/SKIP
TV/VCR PREV.CH
R
E
C
R
E
C
.
S
P
E
E
D
L
I
N
E
I
N
A
U
D
I
O
S
E
A
R
C
H
/
E
X
I
T
C
L
E
A
R
D
I
S
P
L
A
Y
POWER EJECT
CH/TRK
VCR
TV
CABLE/DSS
ENTER
MENU
SLOW
VOL
100
POWER
Press to turn your VCR, TV , Cable Box
or DSS®Box on and off.
VCR
Press to set remote to control the VCR.
CH
Press to change channels.
TRK
Press to adjust cassette tracking.
VOL UP/DOWN
Press to change the sound level of yourTV .
V-LOCK
Press to lock the shaking screen in the still mode.
F .ADV/SKIP
In play mode, press to skip ahead 30 seconds.
In still mode, press to advance one frame.
DISPLA Y
Press for on-screen information displays.
NUMBER BUTTONS
Press to select channels by assigned numbers.
REC
Press to start VCR recording.
REPLA Y
Press to repeat last for 5 seconds of tape during
playback.
100
Press to select channels higher than 100.
(followed by up to two additional number buttons)
REC.SPEED
Press to select tape speed.
SEARCH/EXIT
Press to enter the variable search mode or to exit
the on screen menu.
STOP, PLAY, REW, FF
Press to control cassette playback
or to move a cursor in the on screen menu.
EJECT
Press to eject a video cassette.
SHUTTLE
Press to change speed during playback.
LINE IN
Press to switch between line input or antenna.
CABLE/DSS
Press to set remote to control a CABLE Box or DSS
®
Box.
TV
Press to set remote to control the TV .
CLEAR
Press to set counter to zero or to clear timer record programs.
MENU
Press to display menu screen.
SLOW
Press for slow-motion during playback.
AUDIO
Press to select audio.
PREV .CH
Press to see the previous channel.
TV/VCR
Press to switch between TV and VCR source or to
activate Lock function.(See pages 6, 16.)
ENTER
Press to save the OSP data of TV.
Universal Remote Control (For SV-D142P only)
Remote Control batteries
If you won’t use the remote for a long time, remove the batteries and store them in a cool, dry place. Batteries should last about a year. When replacing batteries, use all new batteries, and never mix alka­line and manganese batteries.
1
Remove the battery compartment lid by lifting
the cover.
2
Insert two AAbatteries as shown.
Match + and -ends of the batteries as indicated inside compartment.
3
Replace the compartment cover.
Your New VCR
Brand Mitsubishi Sharp Zenith Daewoo Sanyo Emerson Sharp Panasonic 2
Controlling a Compatible TV, a Connected Cable Box and a DSS®Box.
You can program your VCR remote to control some functions of connected equipment: 1 Turn the TV on and point the VCR remote at the equipment.
2 Press and hold down the equipment button(TV or CABLE/DSS) on the remote control. At the same time,
press the appropriate number buttons according to the chart below. When the equipment turns off, programming is completed. The remote now controls the equipment functions shown in the chart below.
This remote will not operate all equipment’s made by the manufacturers listed below. If your equipment does not respond to any of the button combinations, the equipment probably cannot be controlled by this remote control.
Brand Sony Magnavox Sanyo RCA/GE Toshiba Hitachi JVC Panasonic 1
Samsung
old
Samsung
new
Samsung
Latin
Sharp
new
Goldstar
new
Goldstar
Latin
Goldstar
old
NO 01 02 03 04 05 06 07 08 09 10 11 12
NO 13 14 15 16 17 18 19 20 21 22 23 24
Samsung
Latin
ANVISION 13,20,21,22,23,24,25,26,58,62 ARCHER 29,42,44 CABLEST AR 13,20,21,22,23,24,25,26,58,62 CABLE VIEW 42,44 CITIZEN 42,44 CURTIS 8,9,56,61 DIAMOND 29,44 EAGLE 13,20,21,22,23,24,25,26,58,62 EASTERN 28 GC BRAND 42,44 GEMINI 4,30 General Instruments
1,2,3,4,55,75,85 HAMLIN 14,15 HITACHI 31,79,80 JEROLD 1,2,3,4,55,75,83,85 MACOM 31,79,80 MAGNAVOX 13,20,21,22,23,24,25,26,58,62 MOVIETIME 32,38,39 NSC 38,39 OAK 10,11,12,13,46 OAK SIGMA 46 PANASONIC 6,8,16,17 PHILIPS 13,20,21,22,23,24,25,26,58,62 PIONEER 5,6
PULSER 43,44 RANDTEK 13,20,21,22,23,24,25,26,58,62 RCA 6,8,16,17 REGAL 14,23,41 REMBRANDT 32 SAMSUNG 4,6,42,44,78,86 Scientific Atlanta 8,9,61,56 SHERITECH 26,27,28 SL MARK 4,6,42,78 SPRUCER 6,8,16,17 STARGATE 4,6,42,44,78 SYLVANIA 19 TEKNIKA 74 TELECAPTION 77 TELEVIEW\ 4,6,42,78 TEXSCAN 18,19 TOCOM 33,34,48,49,73 TOSHIBA 36 UNIKA 20,21,29,42,44 UNIVERSAL 43,52,63,82 VIDEOWAY 7,45,50,59 VIEWSTAR 13,20,21,22,23,24,25,26,58,62 WARNER AMEX 6 ZENITH 7,45,50,59
Programming codes to control a Cable Box
Programming codes to control a DSS®Box
CODE BRAND 96 PANASONIC 97 RCA 98 SONY 99 TOSHIBA
4
5
Your New VCR
SHUTTLE
V-LOCK
REPLAY F.ADV/SKIP
AUDIO SEARCH/EXIT CLEAR
R
E
C
R
E
C
.
S
P
E
E
D
D
I
S
P
L
A
Y
POWER EJECT
CH/TRK
TV/VCR
LINE IN
PREV.CH
A.TRK
MENU
SLOW
100
POWER
Press to turn your VCR on and off.
TV/VCR
Switch between TV and VCR source or to activate Lock function. (See pages 6, 16.)
CH
Press to change channels.
TRK
Press to adjust cassette tracking.
V-LOCK
Press to lock the shaking screen in still mode.
F .ADV/SKIP
In play mode, press to skip ahead 30 seconds.
In still mode, press to advance one frame.
DISPLA Y
Press for on-screen information dis­plays.
NUMBER BUTTONS
Press to select channels by assigned numbers.
REC
Press to start VCR recording.
REPLA Y
Press to repeat last for 5 seconds of tape during
playback.
100
Press to select channels higher than 100.
(followed by up to two additional number buttons)
REC.SPEED
Press to select tape speed.
STOP, PLAY, REW, FF
Press to control cassette playback
or to move a cursor in the on screen menu.
EJECT
Press to eject a video cassette.
SHUTTLE
Press to change speed during playback.
LINE IN
Press to switch between line input or antenna.
PREV .CH
Press to see the previous channel.
A.TRK
Press to adjust cassette tracking automatically.
CLEAR
Press to set counter to zero or to clear timer record programs.
MENU
Press to display menu screen.
SLOW
Press for slow-motion during playback.
AUDIO
Press to select audio.
SEARCH/EXIT
Press to enter the variable search mode or to exit
the on screen menu.
VCR Remote Control (For SV-D52P only)
6
VCR Setup
Use the jacks on the rear panel to connect the VCR to other components and signals, including: VCRs, TVs, stereo equipment, digital video components, antenna and cable signals.
75-ohm round antenna lead
300-ohm flat antenna lead with adapter
Cable/Antenna IN TO VCR
VCR OUT TO TV
Antenna Connection
If your outside antenna cable is a 300 ohm flat feeder, use an adapter to connect the antenna to the VCR input termi­nal. You can purchase an adapter at an electronics store. If your antenna already has a round lead, simply connect it to the terminal on the rear panel of the VCR.
Once your antenna is connected to the VCR, connect a cable from the VCR to your TV from the “Out to TV” terminal on the rear panel of the VCR.
Cable Connections
Basic Cable TV Connection
3 4
This set-up will enable you to:
- Record an unscrambled channel.
- Watch an unscrambled channel while recording it.
- Record an unscrambled channel while watching another (only when you connect a cable-compatible TV).
You will need to:
• Select TV channel 3 or 4 to receive video signals.
• To record a channel while watching another, press TV/VCR on the remote control to turn off the “VCR” indicator in the VCR display and select a desired channel on the TV.
Rear Panel
Connections
SV-D142P
SV-D52P
AUDIO OUT (L/R)
Used to output audio signals to connected equipment.
AUDIO IN (L/R)
Used to input audio signals from connected equipment.
IN FROM ANT
Used to input cable or antenna signals.
OUT TO TV
Used to output VCR signals to TV.
VIDEO IN
Used to input video signals from connected equipment.
VIDEO OUT
Used to output video signals from VCR to connected equipment.
CH 3/4
Set to channel 3 or 4 to match the channel selected at the TV.
AUDIO OUT
Used to output audio signals to connected equipment.
AUDIO IN
Used to input audio signals from connected equipment.
IN FROM ANT
Used to input cable or antenna signal.
OUT TO TV
Used to output VCR signals to TV.
VIDEO IN
Used to input video signals from connected equipment.
VIDEO OUT
Used to output video signals from VCR to connected equipment.
CH 3/4
Set to channel 3 or 4 to match the channel selected at the TV.
Loading...
+ 21 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use