Samsung's OMS (Optical Media Solution) Customer Support Website
(http://www.samsung-ODD.com) offers the latest versions of firmware for
ODD products, user instructions and product information.
This symbol indicates explanations about extremely dangerous matters. If users ignore this
symbol and handle the device the wrong way, serious injury or death could result.
This symbol indicates explanations about dangerous matters. If users ignore this symbol and
handle the device the wrong way, damage to home or property could result.
Important to read and understand at all times.
Select Languages
English
Do not disassemble.
Always make sure that the disc does not have a crack before use. If the disc has a crack (especially
around the center hole), it is recommended to make a copy immediately and use the copy instead.
When a cracked disc is used continuously, the size of the crack is likely to grow and this will
eventually result in irreparable damage to the disc.
Handle with caution to prevent damage from an external shock.
Do not drop the drive, and protect it from severe shocks.
- It can damage the drive or cause it to malfunction.
Select Languages
English
Do not move the drive while in operation and do not attempt to open
the disc tray by force.
Make sure to close all working programs before attempting to open the
tray and always use the open/close button.
Do not insert a pin into the emergency opening while in operation.
Do not insert hands in the tray while in operation.
This may cause damage to the product or human body.
Do not use cracked, distorted or damaged discs.
In particular, a disc with a crack on the inner tracks may break
while in use.
Always check to be sure the disc is not cracked before use. If you find a crack on the disc
(especially around the center hole), make a copy of the disc immediately and use the copy instead.
Continued use of a cracked disc will cause the crack to become bigger, resulting in irreparable damage
to the disc.
Do not use low-quality discs (illegal, scratched, damaged, etc.).
Samsung is not responsible for any loss resulting from the use of such discs.
Samsung Eco-mark
The Samsung’s own Eco mark helps consumers
to easily understand that Samsung develops
eco-friendly products. This mark represents
Samsung’s continuous effort to develop ecofriendly products.
(Restriction of the use of certain hazardous substances in electrical and electronic equipment)The
RoHS
RoHS, the environmental regulation announced by European Union, restricts the use of lead , mercury,
cadmium, hexavalent chromium, PBB, and PBDE in products put on the market in The European Union
after July 1, 2006.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other Europ ean countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with
other household waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal , please separate these
items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.
The DVD Writer allows writing DVD±RW discs using Nero Express and enables
"packet writing" (high-speed record ing) using InCD.
The drive also allows writing DVD±R discs using Nero Express.
Unauthorized copying of DVD or software titles is illegal and the indiviDLs that make
illegal copies will be held responsible for any copyright infringement.
Using low-quality discs may lengthen the recording time or no t sup po rting due to
reduction in double speed.
You can use the DVD Writer to playback Music CD, CD-ROM, CD-R/RW, or DVD-ROM disc like a CDROM drive or a DVD-ROM drive. If your computer recognizes the [CD-ROM] icon designated to the DVD
Writer as the 'E:' drive, insert a CD-ROM or a DVD-ROM disc and access the 'E:' drive.
(The actual drive letter of the DVD Writer may vary depending on the user's system environment.)
If you want to use this product to play a commercial DVD-Video title('DVD title')
Most of DVD titles in the market adopt the Dolby sound system.
You are required to install software that supports Dolby decoding on your PC before you can play a DVD
title using the DVD writer purchased.
How to obtain commercial software supporting Dolby decoding.
Visit the website of Nero: http://www.nero.com
(You can use other compliant software if you want to.)
Select Languages
English
DVD Region Protection Coding (RPC):
The RPC feature is supported on DVD players and is used with DVD-video discs (such as movies).
Currently, the motion picture industry has divided the world into different regions or zones that
correspond to the regional markets into which the motion picture indu stry rele ases movies. Simp ly put,
RPC codes are placed on movies marketed throughout the world, based on the region of the world
inwhich they are being sold. These R PC codes help control and prevent pirating of new movies into
other motion picture regions prior to their true release dates within those markets.
The DVD Writer supports RPC phase II. In the RPC-2 mode, the local code can be changed by users.
RPC-2 is selected by default for The DVD Writer.
You can change the region code up to five times via an MPEG applicatio n.
Please contact your dealer or local SAMSUNG representative if you w ish to change the local code
more than five times.
MAGIC SPEED is a program that supports user to select at his or her discretion the reading speed of
CD disc between two modes offered by drive: Maximum Speed Mode (Max Mode) and Silent Mode.
Development Background
ODD products launched nowadays are providing a high reading spee d.
With the increased reading speed, faster data processing has become possible. However, high rotation
speed often causes louder noise, and it is more possible to crash the cracked or bent discs. Against this
backdrop, our Company has developed a speed-down algorithm and applied this technology to newlylaunched products to provide safer and more comfortable environments for PC users.
※ What is Speed-down Algorithm?
It establishes a safer disc reading speed in operating the device in order to prevent possible disc
crashes in using CDs with cracks in starting. In addition, for customers who want to play CDs at its
maximum speed, MAGIC SPEED program offers the function of selecting reading speed, so that
customers can set the speed as they want. (Recording speed will run at recordable speed without
limit)
What are MAGIC SPEED and How to Use?
MAGIC SPEED Mode
●
Max Mode: Setting reading speed to its maximum level provided by drive.
●
Silent Mode: Setting reading speed to a stable low speed.
●
Any mode set by Magic Speed will be reset to "Low noise mode" when the PC restarts, so please
check the current mode if you want to use “The maximum speed mode” and change the settings
where necessary.
Caution
such disc in Silent Mode, or make a copy immediately before use.
How to Use MAGIC SPEED
●
●
●
●
※ We recommend you to use "Max Mode" for data copy or disc copy, and "Silent Mode" for normal
※ Other functions
: A disc with crack may be crashed in playing with Max Mode. We recommend you to use
First, install MAGIC SPEED program registered on our website.
On MAGIC SPEED tray icon, select right-click to execute the program.
Select the mode you want to use on Program Execution Window and select “settings”. Then,
reading speed of the drive will run in selected mode.
Select “Close” to exit Program Execution Window.
In this occasion, reading speed will be run in the set speed if there is no separate mode chang e or
program exit.
operation.
▶
To disable Auto Run
This is a default program that automatically runs in every PC booting.
If you want to quit this auto run function, deselect the auto run item selected on tray icon
menu.
Where Can I Download MAGIC SPEED?
Visit our website for customer support (URL:www.samsung-ODD.com), and select Firmware → MAGIC
SPEED.
This part of the manual is to prevent damages or data loss.
Read carefully and use the device properly.
Do not place it under the direct sunlight.
Place it so that it sits on its side on a flat surface.
Do not scratch or place a label on the disc.
Handle the disc with caution to prevent damage from an external shock.
Do not expose it to severe temperature-fluctuations.
(Exposure to such environment may cause congealing.)
The tray doesn't close.
The PC is not working properly.
The drive is not working properly.
The system dosen't read the disc.
Select Model
SH-S243D(TS-H663D)
See if the PC is on.
Make sure the power cable within the PC is connected properly.
If the tray still won't open with the power-on, turn the power-off and
insert a pin(paper clip) into the emergency hole to open.
Make sure the disc has been inserted properly.
See if the drive is properly connected to the PC.
See if the drive is connected properly to the PC.
See if the device drive program has been installed properly.
See if the system detects the drive.
Make sure you use the types of discs that are supported by the drive.
Check if the LED indicator turns green.
Select Languages
English
Make sure you inserted the disc with the label facing up.
Make sure you are using the right program for disc playback.
See if the disc is clean.
See if any congealing has occurred.
Make sure the region code of the drive matches the disc number.
You can confirm the use of software at the site of our customer support.
Address: www.samsung-ODD.com
- See “ SUPPORT > Download Center > User Manual ”
- See “ INFORMATION > Flash Manual > Recording Software ”
- See “ INFORMATION > Flash Manual > Software Quick Manual ”
DVD Writer records data on the disc by applying laser light onto the surface of the disc, and therefore writing
errors may occur if you use a damaged disc, for example. Be sure to eliminate the following error-causing
elements before you start writing.
* The following settings are recommended for all DVD Writer.
Avoid a situation that requires multitasking, and remove turn off the screen saver.
A buffer underrun may occur if the system multitasks while the DVD Writer is writing/erasing.
Block any outside attempt to access the host PC during a writing session.
An error may occur if another user accesses the printer connected to his/her the system via the
network during a writing session.
Disable the CD auto-run feature of the CD.
Inserting an auto-run enabled CD in to another drive connected to the same system during a
writing/erasing session may cause an error.
It is recommended that you use the image file format when you write a large number of smallsized files.
When there are a large number of small-sized files to write, the system's transfer rate drops and
the Superlink feature works at a more frequent rate, resulting in lower wri ti ng quality.
If you are doing a CD-to-CD write, it is not necessary to check to see if you have available space
on your hard disc beforehand.
Select Languages
English
However, in the case of image files, it is recommended that you be sure you have at least twice the
amount of space needed for the data on your hard disc, as image files are copied to the hard disc
before they are copied to the media.
Use a regulation-length (50cm) or shorter S-ATA cable.
Using an S-ATA cable longer than 50cm may cause a transmission error.
Do not use more than one type of writing software.
Before you install a writing program, be sure to first uninstall existing versions of the program or
other writing program(s) and reboot the system first.
(The Windows operating system may be damaged if you install the Korean version while the
English version remains on the system.)
It is recommended to use the data recording softwar e provided by Samsung.
You may experience an error if you use other recording software.
The disc has bad properties data, and or there are other discs with different properties
available under the same ID.
The drive's write strategy is set in a way that the drive examines to examine the disc properties and
determines the optimal write conditions for those properties.
For example, many disc makers do not bother to insert property information distinguishing 48X
discs from 32X discs. Since the two types of discs have the same properties data, although they
actually have different properties, it is often impossible to respond to the situation with a single write
strategy. In order to ensure stable writing, it is necessary to downgrade the write speed.
If discs from two different disc makers have the same write speed according to the labels, but
actually have different write speeds, it is necessary to downgrade the write speed to ensure stable
writing.
Samsung' s Standards for Write Speed Restriction.
Write speed is downgraded for the sake of write stability, if high-speed discs
Standard 1
available in the market have particularly bad properties data, or there are
low-speed discs available under the same ID.
Speed-restricted discs go through further examination and adjustments
later. If high-speed discs are available under the same ID with as low-speed
Standard 2
You may experience lower write quality in case if you use disc products by some disc makers
which that are not registered with the product's firmware.
Therefore, it is recommended that you use only discs by recommended companies. Even, and
even if the write session is completed successfully, check the write quality before you put the disc
in storage, especially in case of an important data backup.
(Samsung is not responsible for any loss resulting from data backup failure.)
We update the list of supported media on a regular basis through our firmware upg r ades.
discs (speed restricted at present), the speed restriction is removed when
the low-speed counterparts become no longer unavailable in the market
under the same ID.
Do not support DVD-R for Authoring.
Cannot playback or record on both sides of a dual layer disc simultaneously.
The read/write capacity of the supported discs depends on the condition of the disc
and the recording format of the drive. Therefore, the read/write quality may not be perfect.
Please firmly place the product onto the PC before use.
Specifications are subject to change without notice.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency e nergy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measu res:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and rece iver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technicia n for help.
CAUTION
Change or modifications not expressly approved by the manufacturer responsible for compliance could
void the user's authority to operate the equipment.
Laser Standard
IEC 60825-1 : 1993 + A1 : 1997 + A2 : 2001
The product specifications above may be ch anged to improve device performance without
prior notice.